Updated Nov 17, 2026· 15 min read

Key takeaways

  • Compare seven Pellon interfacings for t-shirt quilts, from 911FF and SF101 to Easy-Knit EK130, by fiber, weight and grain, with buy-if and skip-if notes too.

T-shirt knit stretches, and a stretchy square will not sew into a flat quilt block without help, so picking the best Pellon for t-shirt quilts is the first big decision. This guide compares seven Pellon interfacings by fiber, weight, grain and fabric use, and says where each page is silent, so you know the limits before you buy.

Quick verdict on the best Pellon for t-shirt quilts

For most t-shirt quilts, start with a nonwoven fusible that the maker lists for knit fabric, such as 911FF, or the knit interfacing Easy-Knit EK130. Shape-Flex SF101 is a woven option that its page lists for wovens and knits. Pick by weight and stretch first, then by fiber.

None of the pages read for this guide mentions t-shirt quilts, so every fit here is general interfacing knowledge applied to the maker’s stated fabric uses. The guide does not promise a result, and it does not claim hands-on use, because the writer is not a quilter. Test on a scrap of the shirt first.

A word on the heavier products. Mid to heavyweight and decor interfacings are made for stiff results, and they are likely to make a shirt block feel stiff. They are covered so you know what to skip.

Comparison of Pellon interfacings

The table lines up seven Pellon products by weight, build and the fabrics each page names. Use it to narrow the field, then read the product sections for the limits. Care and fusing steps are not stated on most pages, so follow the instructions printed on the package you receive.

Pellon product Build Weight listed Fabrics named Main trade-off
911FF Fusible Feather to Midweight Nonwoven fusible Feather to midweight Knit fabric, jersey, chambray No care steps on the page
SF101 Shape Flex Woven Fuse Woven cotton fusible Light to medium Wovens and knits Woven grain, crisp support
SF568 Lightweight Shape-Flex Woven fusible Lightweight Lighter fabric, small projects Fiber not stated
931TD Fusible Mid to Heavyweight Nonwoven fusible Mid to heavyweight Medium to heavyweight fabric Heavier than most shirts need
EK130 Easy-Knit Knit, 100% polyester, fusible Not stated Light to midweight knits Weight not stated
906F Fusible Sheerweight Nonwoven fusible Light weight Sheer and lightweight fabrics May be too light for heavy prints
809 Decor Bond Heavy Fusible Nonwoven fusible Heavy Placemats, lampshades, drapery Firm, for crisp household items

How we selected the best Pellon for t-shirt quilts

Each product had to be a Pellon interfacing or stabilizer on a retailer page that could be opened, with a stated build and fabric use. A product seen only in a search snippet was left out, and the Bosal and store-brand interfacings that appeared in searches were not included because the keyword names Pellon.

The list covers the range a quilter meets at the store: a featherweight to midweight nonwoven, two woven Shape-Flex types, a mid to heavyweight nonwoven, a knit interfacing, a sheerweight and a heavy decor type. The heavy products are there as a contrast, so the buying guide can explain why weight matters to a shirt block.

Because no page names t-shirt quilts, the picks are ranked by how closely the stated fabric uses match a knit shirt. That is a judgment from the page text, not a test. Always try a small piece of the actual shirt and the actual interfacing before you commit a whole shirt collection.

Pellon interfacings reviewed

Each product gets the same treatment: who it is for, what the page states, the limits, the pros and cons, and a buy-if and skip-if line. Names follow the product pages, and sizes are written in inches and yards as the pages give them. Read the limits line first if you already know your shirt fabric.

Pellon 20 inch x 40 Yard Bolt Fusible Feather to Midweight (911FF)

The 911FF bolt is the first stop for a t-shirt quilt because the page names knit fabric and jersey in its list of fabrics. It is a nonwoven fusible, which means it has no woven grain, and that matters when you are backing a knit that stretches in more than one direction.

Who it is for: quilters who plan several shirts and want a bolt on hand, or who want a light layer of support behind soft knits. It fits the keyword because the page says it is best with knit fabric, challis, chambray, jersey and linen.

What the page states: Pellon item 911FFPWHT, 20 inches wide on a 40 yard bolt, fusible, a nonwoven interfacing for light to midweight fabrics. It says best with knit fabric, challis, chambray, jersey and linen, and not recommended for lace or rainwear. The page gives no fusing or care instructions.

Limits: a 40 yard bolt is a large purchase for one quilt, so check whether the same product is sold by the yard. No page says how it behaves on printed shirt graphics or stretch. Test on a scrap.

  • Pros: nonwoven, knit and jersey named on the page, feather to midweight range, 20 inch width.
  • Cons: bolt size is large, no fusing or care steps on the page.
  • Buy if you want a nonwoven fusible that the maker lists for knit fabric.
  • Skip if you need only a small cut for one shirt.

Pellon 20 inch x 25 Yard Bolt Shape Flex Woven Fuse (SF101)

Shape-Flex SF101 is the woven option that many quilters know, and its page says it is ideal for wovens and knits. It is cotton, so it has a grain like fabric, and it gives crisp support rather than a soft, stretchy backing. It is a common name in quilting aisles.

Who it is for: quilters who want firm, stable shirt blocks and who prefer a cotton interfacing with stated care steps. It fits the keyword because the page lists knits among its fabrics and describes permanent stability and support.

What the page states: Pellon item SF101PWHT, size 20 inches by 25 yards, single-sided fusible, iron-on woven cotton interfacing, 100% cotton, light to medium weight. It gives crisp support, and the care list says to pre-shrink with warm water and air dry, machine wash warm, tumble dry low or dry clean, and use a warm iron or steam as needed.

Limits: because it is woven, it has a grain, so cut it with the grain in mind. Crisp support may reduce the soft drape of an old shirt, which is a question of taste. The listed uses are garments and needlework, not quilts.

  • Pros: woven cotton, wovens and knits named, light to medium weight, care steps listed.
  • Cons: crisp feel, grain to manage, uses listed are garment details.
  • Buy if you want firm blocks and a documented care list.
  • Skip if you want the softest possible backing.

Pellon 20 inch x 25 Yard Bolt Lightweight Shape-Flex (SF568)

The lightweight Shape-Flex is the thinner woven choice. Its page describes it as providing support and body to lighter fabric and small projects, so it is a candidate for thin, worn shirts where a heavier woven would feel stiff. It is the lightest woven in this list.

Who it is for: quilters working with very thin or soft shirts who want a light woven backing. It fits the keyword by weight only, since the page does not mention knits, so a test piece matters more than usual.

What the page states: Pellon item SF568WHT, a 20 inch wide, 25 yard bolt of lightweight woven fusible interfacing. It provides support and body to lighter fabric and small projects, and it can be pre-shrunk by soaking in warm water and air drying, with no washer or dryer. The fiber is not stated.

Limits: no fiber content, no knit mention, and no fusing steps appear on the page. It is a woven, so grain applies. The product is sold as a bolt, which may be more than a single quilt needs.

  • Pros: lightweight woven, pre-shrink steps stated, small project use.
  • Cons: fiber and knit use not stated, bolt size.
  • Buy if your shirts are thin and you want a light woven.
  • Skip if you want a product that names knits.

Pellon 20 inch x 25 Yard Bolt Fusible Mid to Heavyweight (931TD)

The 931TD is a stiffer nonwoven for sturdier fabrics. Its page says it is for medium to heavyweight fabric, which is heavier than the average cotton shirt, so it may be more support than a t-shirt block needs. Think of it as the firm end of the range.

Who it is for: quilters who want a firm result and are using thick, heavy-print or fleece-like shirts, such as sweatshirt fabric. It fits the keyword only loosely, since the stated fabrics are heavier than most t-shirts, so it is a specialty choice.

What the page states: Pellon item 931TDPWHT, a 20 inch wide, 25 yard bolt, fusible, a non-woven interfacing for medium to heavyweight fabric. The page gives no fusing or care instructions, and no stretch or knit details.

Limits: because it is a heavier product, it may add stiffness and bulk in seams. If you want a softer quilt, try a lighter choice first, and compare a scrap of the shirt backed with each type.

  • Pros: nonwoven, mid to heavyweight, sturdy for thick fabrics.
  • Cons: heavy for most shirts, no knit or care details on the page.
  • Buy if you are backing sweatshirt-weight or very heavy shirt fabric.
  • Skip if you want a soft, drapey quilt.

Pellon Easy-Knit EK130

Easy-Knit EK130 is the one Pellon here built from knit fabric itself, and that matters for a quilt made of knit shirts. The listing describes crosswise stretch for flexible shaping, so it is designed to move with a knit rather than lock it flat. It is the only knit build here.

Who it is for: quilters who want a stretch-friendly interfacing and are willing to test. It fits the keyword because the page lists knits among its suitable fabrics, even though it names garments, not quilts.

What the page states: the eeschenck listing shows Pellon Easy-Knit EK130, 100% polyester, fusible, 20 inches by 25 yards, in beige. It has lengthwise grain for body and stability and crosswise stretch for flexible shaping, and it is suited to light to midweight knits, wovens, sweater knits and machine knitted fabrics. It is listed for dresses, jackets and pants and described as sewing machine safe. The weight is not stated.

Limits: no weight is stated, no pressing or washing steps are given, and the page does not discuss quilts. Because it has a stretch direction, line up the stretch with the shirt’s stretch.

  • Pros: knit build, crosswise stretch, knits named, 100% polyester.
  • Cons: weight not stated, garment uses listed, no care steps.
  • Buy if you want an interfacing that stretches like the shirts.
  • Skip if you want a firm, flat result.

Pellon 20 inch Fusible Apparel Interfacing, Sheerweight (906F)

The sheerweight is the lightest of the group. The page calls it extremely lightweight and nonwoven, and it is the lowest-bulk way to add a touch of support when a shirt is already thick or when you want the softest possible block. It is also the only one with a stated wash and dry note.

Who it is for: quilters working with soft, thin shirts, or those who want only a light stabilizing layer. It fits the keyword by weight, since the page lists sheer and lightweight fabrics, not knits.

What the page states: Pellon item 906FP-WHT, fusible, 30 yd long, 20 in wide, light weight, made from 100% polyester and nonwoven. It is ideal for sheer and lightweight fabrics such as crepe de chine, handkerchief, linen and voile, and it is safe to sew on as well as to wash and dry.

Limits: it may be too light for a heavy shirt print, and the page names no knits. No fusing steps are given. A trial piece will show whether it gives enough support.

  • Pros: very light, nonwoven, 100% polyester, wash and dry safe per the page.
  • Cons: no knit mention, may be too light for heavy prints.
  • Buy if you want the least added bulk.
  • Skip if your shirts need strong stabilizing.

Pellon 45 inch x 25 Yard Bolt Decor Bond Heavy Fusible (809)

Decor Bond is included to show what to skip. The page calls it firm and non-woven and lists placemats, lampshades and drapery, which are stiff household items, so it is not a good match for a soft t-shirt quilt. It is a contrast to the softer picks. Skip it here.

Who it is for: makers of crisp household items. It does not fit the keyword by use, since the page names no apparel fabrics and no knits. It is here because a store aisle may place it near other Pellon products.

What the page states: Pellon item 809SRPWHT, 45 inches wide on a 25 yard bolt, heavy fusible, firm and non-woven, providing extra crisp support, great for placemats, lampshades, drapery and other household items. The page says to double up for extra-rigid support.

Limits: it is built for rigidity, and a quilt made of shirts is meant to be flexible. Skip it for t-shirt quilts unless you are making a stiff accessory.

  • Pros: extra crisp support for stiff household items, wide 45 inch width.
  • Cons: rigid, not for soft quilts, no knit use named.
  • Buy if you are making placemats or lampshades.
  • Skip if you are making a t-shirt quilt for use.

Buying guide for Pellon and t-shirt quilts

A t-shirt quilt needs the shirt fabric to behave like quilting cotton, and interfacing is the usual way to calm the stretch. This section explains fusible versus sew-in, weight, woven versus nonwoven versus knit, and testing, in general terms and without any promise of results.

Why t-shirt knits need stabilizing

Knit fabric stretches, and a stretchy square is hard to cut, sew and match to the next block. Interfacing gives the shirt a more stable surface so the pieces hold their shape. The word that matters is stable, not stiff, so choose the lightest product that does the job.

Different areas of a shirt behave differently. Printed graphics can be thicker and less stretchy than the plain fabric around them. Plan for the whole block, and cut the interfacing to cover the full square plus seam allowances so the edges are supported too.

Fusible or sew-in

Fusible interfacing has heat-activated glue on one side and is pressed onto the shirt. Sew-in interfacing is stitched in at the seams and needs no heat. A guide from Linda’s Electric Quilters notes that sew-in suits fabrics that cannot tolerate iron heat, and every product reviewed in this guide is a fusible type.

If a shirt has a heat-sensitive print, test the iron on a scrap, away from the print, before pressing the real block. Never assume a graphic will tolerate heat because the fabric does, and follow the instructions on the package you receive.

Weight, woven, nonwoven and knit

Weight tells you how much body the interfacing adds. Woven interfacing has a grain like fabric, nonwoven has no grain and is stiffer, and knit interfacing is made from knit fabric and can stretch in one direction. A guide on Pellon weights makes the same split between woven and nonwoven.

For knits, the maker pages list a nonwoven 911FF for knit and jersey, a woven SF101 for wovens and knits, and the knit Easy-Knit EK130 for light to midweight knits. None of them names t-shirt quilts, so match weight to your shirt and test it on a piece.

Testing on a scrap before you buy a bolt

Buy a small cut first if the shop offers one, because a bolt is a lot of interfacing if it does not suit your shirts. Press a test square, let it cool, then handle it: check that the stretch is calm, the print still looks right and the fabric has not shrunk or puckered.

Test with the shirt’s actual print area, not only plain fabric, and test a wash if you plan to wash the quilt. Follow the care label of every fabric, and test colorfastness on a hidden spot so that one dark shirt does not bleed into a pale one.

Cutting and grain

Woven and knit interfacings have a grain, and nonwoven does not. Line up the lengthwise grain with the shirt’s lengthwise direction when the product has one. The Easy-Knit page lists lengthwise grain for body and stability and crosswise stretch, so the stretch goes across.

Cut the interfacing a little smaller than the square so the glue does not reach the pressing surface at the edges, and cut the shirt square first so it is easy to place. Keep the same orientation for every block so the quilt top behaves evenly.

Weight versus feel of the finished quilt

The heavier the interfacing, the stiffer the block. A quilt made of heavy blocks can be firm and flat, while one made with a lighter product is more flexible. Think about how the quilt will be used: a wall hanging can be firm, while a bed quilt may feel better softer.

Batting choice also changes the feel, since a thicker batting adds loft over the interfaced blocks. Choose the batting whose maker states care that matches the quilt, and keep the care label for every product you use.

FAQ about Pellon for t-shirt quilts

These answers stay with what the product pages state and with general sewing practice. They do not promise a result on any shirt, because that depends on the knit, the print, the iron and your handling, and none of the pages mentions t-shirt quilts directly.

Do I need interfacing for a t-shirt quilt?

Many makers use it because knit stretches and shifts. It is a general practice and not a rule, and the pages here do not say a t-shirt quilt needs interfacing. Try a test block with and without it, and choose what suits your shirts and the quilt’s use.

Is 911FF good for jersey shirts?

The 911FF page lists knit fabric and jersey among the fabrics it is best with, and it is a nonwoven for light to midweight fabrics. It does not mention t-shirt quilts or give fusing steps, so follow the package instructions and test a scrap first. Always test first.

What is the difference between SF101 and EK130?

SF101 is a woven 100% cotton fusible listed as light to medium weight for wovens and knits. EK130 is a 100% polyester knit fusible with lengthwise grain and crosswise stretch, listed for light to midweight knits. SF101 is crisper, and EK130 is built to stretch.

Can I use heavy interfacing for a firmer quilt?

Heavier products such as 931TD and Decor Bond are made for medium to heavyweight or stiff uses. They may add a lot of stiffness and bulk to shirt blocks, so they are specialty choices. Test a scrap and think about how the quilt will be used. Weigh stiffness against support.

How do I wash a quilt made with fusible interfacing?

Follow the care label of the quilt fabrics and the care steps on the interfacing package. The SF101 page lists machine wash warm and tumble dry low, and the sheerweight page says it is safe to wash and dry, but test with your own shirts first. Test colorfastness too.

Conclusion

The best pellon for t-shirt quilts depends on the shirts: start with 911FF or Easy-Knit EK130 for knit fabric and stretch, try SF101 for firm woven support, and save 931TD and Decor Bond for stiffer projects. No page names t-shirt quilts, so test a scrap of your shirt and follow the package directions.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.