Updated Nov 17, 2026· 14 min read

Key takeaways

  • Best fusible batting for quilts compared: Hobbs Heirloom 80/20 and strips, Pellon fusible cotton batting and fleece, with sizes, fiber, fusing and care notes.

Basting a quilt sandwich with pins or spray takes time, and fusible batting promises to hold the layers together with an iron. Finding the best fusible batting for quilts means separating true batting from fusible fleece, which is thinner and lofty in a different way. This guide compares six options using only maker and retailer statements.

Best fusible batting for quilts: quick verdict

For bed and lap quilts, Hobbs Heirloom Premium 80/20 Fusible is the best-documented choice on a maker page, with sizes, loft, spacing and ironing steps. Hobbs strips suit narrow strip piecing, Pellon cotton batting suits wide spacing, and the Pellon fleeces suit bags, small projects and added loft.

  • Bed and lap quilts with maker-stated steps: Hobbs Heirloom Premium 80/20 Fusible.
  • Strip piecing and narrow borders: Hobbs Heirloom 80/20 Fusible Strips.
  • Wide stitching distance on a roll: Pellon Needle Punched Fusible Cotton Batting, 60 inches.
  • Thin fleece for small projects and bags: Pellon 987F Fusible Fleece.
  • Heavier lofty fleece: Pellon 973F Heavyweight Fusible Fleece.
  • Extra-lofty fleece for padded projects: Pellon Thermolam Plus Fusible TP971F.

Comparison table of six fusible battings and fleeces

The table sets each product side by side by fiber, fusible side, stated form and the main trade-off, using the wording of the pages that were opened. It has no price column and no performance scores. Use it to shortlist, then read each entry for sizes, ironing steps and cautions before you commit to a roll.

Product Fiber Fusible sides Stated form Main trade-off
Hobbs Heirloom Premium 80/20 Fusible 80% cotton, 20% polyester Both sides Crib, queen and roll Pre-washing ruins the bond
Hobbs Heirloom 80/20 Fusible Strips 80% cotton, 20% polyester Both sides 2 1/4 inch strip roll Narrow format only
Pellon Fusible Cotton Batting, 60 inch Cotton, needle punched Fusible, details not stated 60 inch by 20 yard roll Care not stated
Pellon 987F Fusible Fleece 100% polyester One side 45 inch width Very lightweight, low loft
Pellon 973F Heavyweight Fusible Fleece 100% polyester One side 45 inch by 10 yard bolt Heavy, less drape
Pellon Thermolam Plus TP971F Not stated One side 45 inch by 15 yard bolt Fiber and care not stated

How we selected the best fusible batting for quilts

Each product below appears on a maker or retailer page that was opened, and every spec is repeated as that page words it. Where retailer pages disagree with a maker page, the entry says so. Nothing here describes hands-on pressing, and no claim about hold or longevity is promised.

  • Products needed a stated fusible side or fusing medium on a page that was opened.
  • Maker pages were preferred for ironing steps, then retailer pages that quote them.
  • Fleece products are kept separate in the entries, since they are interfacing-style and lower in loft.
  • Products with no usable page, such as bamboo fusible batting, were left out instead of described from memory.

Fusible batting and fleece for quilts

Fusible batting comes in two broad families: cotton blend battings that suit whole quilts, and polyester fleeces that suit bags and smaller projects. The entries below give the exact name, who each product suits, the stated specs, the limits, the pros and cons, and a buy-if or skip-if line.

Hobbs Heirloom Premium 80/20 Fusible Cotton/Poly Blend Batting

This is the best-documented fusible batting for bed quilts. Hobbs describes 80% cotton and 20% polyester, lightly bonded and needle-punched, with a water-soluble fusing medium on both sides so the top and back can be adhered in one pressing. Machine quilting is described as excellent.

Sizes are a 45 by 60 inch crib, a 90 by 108 inch queen and a roll 96 inches wide by 30 yards. Loft is approximately 1/8 inch or more, stitching should be every 4 inches or closer, and shrinkage is 3 to 5 percent after laundering. Closer quilting gives a flatter look, and wider spacing gives slightly more loft. The maker recommends medium or dark fabrics.

The ironing steps are specific: a dry iron with no steam, hold about 5 to 7 seconds in each spot, working from the center outward, then let it cool and test adhesion. You can lift and re-press 1 to 2 times. The page says the batting will not stick if it gets wet, and that pre-washing is not recommended. Retailer pages give other press times, so follow the label.

Who it is for: quilters who want to skip pins and spray on a bed quilt. Limits: it is not suited to wet handling, and a retailer guide does not recommend it for longarm. Pros are the double-sided fusing and the stated care. Cons are the darkening note on light fabric and the sensitivity to moisture. Buy it for home machine quilting. Skip it if you pre-wash everything.

Hobbs Heirloom Premium 80/20 Fusible Batting Strips

The strips are the same batting in a narrow format. The maker lists a 2 1/4 inch wide, 25 yard strip roll made from 80% cotton and 20% polyester, lightly bonded and needle-punched, with a water-soluble fusing medium on both sides. It suits strip-based work where a narrow batting layer is needed.

The page says the strips are 2 1/4 inches wide, so they fit under 2 1/2 inch fabric strips without poking out, and that they will not stretch out of shape or easily pull apart, unlike 100% cotton competitors. Loft is 1/8 inch or more, shrinkage is 3 to 5 percent, and you should stitch no more than 4 inches apart.

The iron steps match the sheet batting, with one extra warning in capital letters: do not use steam. Press each spot for about 5 to 7 seconds without moving the iron, and let it cool before testing. Who it is for: strip piecers and quilt-as-you-go makers. Limits: it will not cover a whole quilt. Pros are the fit and the stability. Cons are the narrow format. Buy it for strips. Skip it for whole quilt tops.

Pellon Needle Punched Fusible Cotton Batting, 60 inch roll

This Pellon roll is a cotton fusible batting sold at 60 inches wide in a 20 yard roll. The retailer lists needle punched construction, a fine scrim that helps prevent stretching while quilting, and says it adds stability and definition to quilts. It requires no pinning or basting.

It can be machine or hand quilted, with stitching up to 10 inches apart, which is a wider stated distance than the Hobbs figure. The listing does not state fusing steps, care instructions, loft or the exact cotton content, so confirm those on the roll label before you buy a large amount, and test a small piece.

Who it is for: quilters who want fewer stitching lines and a wider roll for large quilts. Limits: the page gives no iron settings or care. Pros are the scrim and the wide stated spacing. Cons are the missing instructions. Buy it for a large quilt if the label shows clear ironing steps. Skip it if you want documented fusing steps before buying.

Pellon 987F Fusible Fleece

Pellon 987F is a polyester fleece rather than a quilt batting. Hobby Lobby lists it at 45 inches wide, 100% polyester, very lightweight, saying it adds full, lofty body to fabric with fusible resin. The page suits it to purse and handbag designs, appliques, and machine-quilted or padded craft projects.

A packaged version is listed as Fusible Quilting Fleece, 22 by 36 inches, that adds loft and body and works with most fabrics. Another retailer lists a pack of 3 in the same size, one-sided, that can be fused to fabric, cardboard or wood, with a dot or spray adhesive depending on the side. Care is machine wash on warm and tumble dry, then remove promptly.

Who it is for: bag makers and small-project quilters who want body, not bed-quilt warmth. Limits: no iron instructions on the Hobby Lobby page, and one-sided fusing. Pros are the light weight and the machine-washable listing. Cons are the low loft and the missing steps. Buy it for small quilted items. Skip it for a full bed quilt.

Pellon 973F Heavyweight Fusible Fleece

This is the heavier fleece in the group. Checker Distributors lists the 973F as a heavyweight fusible fleece, 45 inches wide in a 10 yard bolt, 100% acid-free polyester, with fusible adhesive on one side. It is described as a lofty, needled fleece that stays lofty after fusing.

The page says it can be fused to fabric, cardboard or wood, lists the weight as heavy, and says it is loftier than 987F fusible fleece but slightly lighter than TP971F Thermolam Plus. Care is machine wash warm on a delicate cycle, then tumble dry low or dry clean. The page gives no iron settings.

Who it is for: makers who want a loftier fusible layer in bags, pillows and padded items. Limits: heavy weight and one-sided fusing, and no ironing steps. Pros are the stated loft after fusing and the care instructions. Cons are the weight and the thin listing. Buy it for padded items. Skip it if you want a drapey bed quilt batting.

Pellon Thermolam Plus Fusible TP971F

Thermolam Plus is the most lofty of the three Pellon fleeces mentioned. A retailer lists it as an extra-lofty needled fleece in 44 or 45 inch width, 15 yards on a bolt, with fusible adhesive on one side, intended for craft, home decorating and quilted projects, and sewing machine safe.

The page does not state the fiber content, the care instructions or which side carries the adhesive, so those details must come from the bolt label. The 973F page ranks the 973F as slightly lighter than the TP971F, which is the only comparison available. No loft measurement is given for any of the three fleeces.

Who it is for: makers of padded home decor and bags who want the most body. Limits: missing fiber and care details, and one-sided fusing. Pros are the stated extra loft and the machine-safe wording. Cons are the thin listing. Buy it for padded projects. Skip it for a quilt that needs a stated cotton content or drape.

Buying guide for the best fusible batting for quilts

Choosing fusible batting depends on the quilt size, the fabrics, the quilting plan and how you wash. The sections below explain the main variables in general terms, using the maker pages and retailer guides read for this article, so you can pick among the products above or compare other brands.

Fusible batting versus fusible fleece

Fusible batting is a full batting, such as an 80/20 cotton blend, with fusing medium on its surfaces, made for a quilt sandwich. Fusible fleece is a thin polyester interfacing-style layer, usually one-sided, sold by the yard for bags and small items. The Hobbs and Pellon pages describe these two families very differently.

For a bed quilt, the cotton blend options are the match, since they are described for quilting and spacing. Fleeces suit appliques, purses and padded crafts, where the Pellon page names them. Check the product name and the stated uses rather than the word fusible alone.

Why the best fusible batting for quilts depends on your fabrics

Hobbs recommends its fusible batting with medium or dark fabrics, and advises testing light or white fabrics first, because unbleached cotton can slightly darken light and pastel fabrics. A retailer page for the same batting repeats the point. Choose a different batting if your top is mostly white.

Heat-sensitive fabrics are another concern. A retailer guide advises testing synthetic or heat-sensitive fabrics first and avoiding high heat on acetate, nylon and other low-heat fabrics. The best fusible batting for quilts you make from mixed fibers is the one you have tested on a scrap sandwich.

Ironing technique and heat

Hobbs describes pressing, not ironing: hold the iron in each spot for about 5 to 7 seconds, working from the center outward, with a dry iron and no steam. Let each pressed area cool before testing adhesion, and press longer if the fabric lifts. Retailer pages give different times, such as 3 to 4 seconds and 10 to 15 seconds.

Because the times differ, follow the label of your own batting and test on a scrap. Too little heat or time may leave the layers loose, and a retailer guide says layers can shift during quilting if pressing is insufficient. Smooth the backing first, since wrinkles are hard to fix once fused.

Washing and the fusing medium

Hobbs says its fusing medium is water-soluble, so it dissolves in the wash and the finished project becomes soft and supple. The same page says pre-washing is not recommended, and a retailer notes that pre-washed batting is no longer fusible. That means you wash only after the quilt is finished.

Moisture also matters before fusing, because the Hobbs page states that the batting will not stick if it gets wet. Keep it dry and out of steam. Follow the care label of the quilt and test fabrics for colorfastness before the first wash of a finished quilt.

Spacing, loft and quilting method

Hobbs states stitching every 4 inches or closer for its 80/20 fusible batting, and says closer quilting gives a flatter low-loft look while wider spacing gives slightly more loft. The Pellon cotton roll lists up to 10 inches apart. Match your quilting plan to the stated distance.

A retailer guide says the Hobbs fusible is intended for home machine quilting and does not recommend it for longarm. If you quilt by longarm, check the maker’s guidance first. Hand quilting is also possible with some products, so read the listing of the one you choose.

Preparing the quilt sandwich

Fusible batting still needs a flat, smooth sandwich. Press the backing and the top first, lay the backing wrong side up on a large flat surface, smooth the batting over it, and add the top right side up. Hobbs says you can fuse the top and back separately or at the same time.

Work from the center outward so wrinkles move toward the edges, and press in sections rather than sliding the iron. A large pressing mat or a clean table protects your floor and gives you room. Let each section cool before you move it, because a warm bond can shift when handled.

Handling, storing and cutting fusible batting

The Hobbs pages say the fusing medium is water-soluble and that the batting will not stick if it gets wet, so keep it in its package until you need it and away from damp rooms. Cut it with a rotary cutter on a mat, and avoid steam or humid areas while handling.

Leave extra on all sides of the quilt top, because quilting draws the layers in. Keep leftover pieces flat or loosely rolled, labeled with the product name, so you remember which side carries the fusing medium. For one-sided fleeces, the retailer page notes a dot side and a spray side, so check which faces the fabric.

Fusible batting questions answered

These answers repeat what makers and retailers state and avoid promising hold or results. Fabric, iron, batting and washing all change the outcome, so treat the answers as a checklist, test a small sandwich first and follow the label of the batting you buy before you press a full quilt.

Do I need to pin or spray baste with fusible batting?

The Hobbs page says the top and back can be adhered in one pressing, and a retailer says fusing eliminates the need to pin or baste. The Pellon cotton listing also says no pinning or basting is required, which is the main reason quilters look at fusible products in the first place.

You still need a smooth, flat layout before pressing. Some quilters add a few pins for safety, but follow the label of your batting for what it requires.

Can I wash fusible batting before use?

Hobbs says pre-washing is not recommended, and a retailer says that if it is pre-washed, the batting will be rendered non-fusible. Wash the finished quilt instead, and expect shrinkage of 3 to 5 percent after laundering for the Hobbs product, as the maker states.

Pre-wash your fabrics if their care labels call for it, and test colorfastness first. Keep the batting dry until you fuse it.

Is fusible batting suitable for a bed quilt?

Hobbs lists a 90 by 108 inch queen size and a 96 inch wide roll for its 80/20 fusible batting, and says machine quilting is excellent. Pellon lists a 60 inch wide roll, 20 yards long, with stitching up to 10 inches apart, so both are described for whole quilts.

Fusible fleeces are described for bags, appliques and crafts, so they are not the usual choice for a bed quilt. Read each listing for its intended use.

Will fusible batting work with longarm quilting?

A retailer guide says the Hobbs fusible batting is intended for home machine quilting and does not recommend it for longarm, where standard non-fusible batting is the better choice. The maker pages used here do not address longarm use directly, so treat this as retailer advice.

If you quilt on a longarm, ask your quilter or check the maker’s guidance before buying. Many longarm projects use a roll of non-fusible batting instead.

How do I fuse only one side?

The Hobbs page says you can fuse the top and back separately, or fuse only one side. If fusing one side, place parchment paper or a non-stick mat under the unfused side, so the fusing medium on that side does not stick to your ironing surface while you press.

Fuse the first side, check adhesion after it cools, then add the second layer later if you wish. You can lift and re-press 1 to 2 times, so work carefully.

What does the quilt feel like after washing?

Hobbs says the fusing medium dissolves in the wash and leaves the batting soft and supple, similar to its non-fusible 80/20 batting once the quilt is washed. A retailer guide adds that the adhesive may add slight stiffness at first that softens after the first wash.

These are maker and retailer statements, and the feel also depends on fabric, quilting density and the wash routine. Follow the care label of the quilt, and keep the first wash gentle.

Conclusion

For a bed or lap quilt, Hobbs Heirloom Premium 80/20 Fusible is the best-documented option, with Hobbs strips for narrow piecing and the Pellon cotton roll for wider spacing. Choose the Pellon fleeces for bags and padded projects. Follow each label, keep the batting dry and test a small sandwich first.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.