Key takeaways
- Compare Carol Doak, Simple Foundations vellum, Sulky Tear-Easy, Patterntrace and a blank pad for paper piecing, with sheet sizes, printing notes and trade-offs.
Paper piecing only works when the paper feeds through your printer, holds up under the needle and tears away without wrecking stitches. This guide compares five options to find the best paper for piecing quilts, using each maker or seller page for sheet counts, sizes, printing notes and tear-away wording.
Quick verdict
For most people printing patterns at home, Carol Doak’s Foundation Paper is the safest starting point, because its page promises a lightweight, non-coated sheet that suits most inkjet and laser printers and tears away easily when you are done. It comes in a 100-sheet pack.
If you like to see the fabric through the paper, the Simple Foundations vellum is the see-through choice, and Patterntrace is described as semi-transparent for positioning fabric. If you draw your own blocks, the It’s Sew Emma blank pad is built for that, and Sulky Tear-Easy is the odd one out: a stabilizer sold for foundation piecing.
None of these pages gives a test result, so treat every claim below as the maker’s or seller’s wording. Print one block on a spare sheet and sew a scrap before committing to a full quilt of blocks.
Comparison table
This table lines up the five papers by pack contents, sheet size, the kind of work each suits best and the main trade-off. Where a page does not say something, the table does not guess: the maker does not state it, so the cell stays general or is left out.
| Paper | Pack as listed | Size as listed | Best for | Main trade-off |
|---|---|---|---|---|
| Carol Doak’s Foundation Paper | 100 sheets | 8.5 x 11 inches | Printing many blocks at home | Page says nothing about pressing |
| Simple Foundations Translucent Vellum | 25 sheets | 8.5 x 11 inches | Tracing without a light box | Small pack |
| Patterntrace Foundation Paper | 100 sheets | A4 or US Letter | Semi-transparent positioning | Listing notes the kit is archived |
| It’s Sew Emma 12 inch Blank Pad | 42 sheets | 13 inch square | Drawing your own blocks | Blank, so no printing guidance |
| Sulky Tear-Easy | 1 yard cut | 20 x 1 yd | Foundation piecing on fabric-like stabilizer | Not a printer paper |
How we selected the best paper for piecing quilts
Each product here appears on a page that was open and listing it for sale, with sheet count, size or product type stated on the page itself. Anything the page did not state is marked as not stated, and nothing is carried over from memory or from another maker’s paper.
The deciding questions were practical ones. Does the page say the paper can go through a home printer or copier, does it say the paper tears away easily, and does it describe the sheet as lightweight, see-through or stable during stitching? Pack size and sheet dimensions came next, since they decide how many blocks you can print.
A fifth paper, the June Tailor Perfect Piecing Sheets, was read but left out of the picks because its page showed it as temporarily out of stock. Kristy Lea’s Foundation Piecing Paper was also read and left out because its page showed it as sold out. A closed Jinny Beyer listing was used only to confirm the legal-size sheet of Carol Doak’s paper.
The writer is not a quilter and nothing here describes hands-on use. Where this guide compares papers, it compares what the pages say, in the order the pages say it, and reminds you to test on a scrap.
Best paper for piecing quilts: our five picks
These five are ordered from the most direct match to the keyword, printable foundation paper made for piecing, toward the pad for hand-drawn blocks and the stabilizer. Each entry covers who it suits, the stated specs, the limits, pros, cons and a buy-if or skip-if line.
Carol Doak’s Foundation Paper
Carol Doak’s Foundation Paper, C&T Publishing item 10985 on the retailer page read for this guide, is the most widely described paper for printing foundation patterns at home. It suits quilters who print many blocks and want one reliable, lightweight stock.
The page says the pack includes 100 sheets of 8.5 x 11 inch paper and calls the paper lightweight, absorbent and non-coated for easy, successful paper piecing. It says the paper suits most inkjet and laser printers or copy machines, holds up during stitching and has no shrinking, curling or turning brittle.
The same page says the foundation tears away easily when you are done. It does not mention pressing or ironing, so the page gives no guidance on heat. A separate closed listing states a legal-size version at 8.5 x 14 inches with 50 sheets and says the paper can be used in most ink-jet and laser-jet printers.
Because the paper is described as non-coated and absorbent, it is the kind of sheet general advice suggests handling gently when you tear: support the stitching with a finger and fold the paper along the line first. The page does not describe that technique, so it is general guidance only.
- Pros: 100-sheet pack, printer and copier friendly wording, lightweight, tears away easily per the page.
- Cons: no pressing guidance, no weight in gsm stated, absorbent paper may take more care with a hot iron.
- Buy if: you print a lot of blocks and want the well-known standard stock.
- Skip if: you want to see fabric through the paper or need a smaller trial pack.
Simple Foundations Translucent Vellum Paper
Simple Foundations Translucent Vellum Paper, listed on the retailer page as a vellum for paper piecing, is for quilters who want to see through the sheet. Its main promise is that you can trace a pattern without a light box and that the sheet tears away easily after stitching.
The page lists 25 sheets of translucent vellum foundation paper in 8.5 x 11 inch size. It says to use the paper with any photocopier, inkjet or laser printer, so it is not limited to one machine type. The page describes it as see-through, which is the reason most buyers choose vellum.
The page gives no pressing instructions. A general note applies to any paper: heat and steam can distort paper, so a dry iron on a scrap is a reasonable first test, but the product page does not say that. Check the pack count on the listing you buy from, since the page read here is one seller’s listing.
- Pros: see-through sheet, any printer or copier per the page, tears away easily after stitching.
- Cons: 25-sheet pack is small for a big quilt, no pressing guidance.
- Buy if: positioning fabric over a printed line is your main difficulty.
- Skip if: you are printing dozens of blocks and need volume.
Patterntrace Foundation Paper
Patterntrace Foundation Paper is a UK-made sheet that suits quilters who want a very light paper and a semi-transparent surface. Its page gives a weight, which is rare among the foundation papers read for this guide, and says it is built for easier tear-away.
The page describes it as lightweight 44 gsm paper for easier tear-away, sold in packs of 100 sheets in A4 or US Letter size, the latter stated as 8.5 x 11 inches. It says the paper feeds smoothly through inkjet and laser printers, is semi-transparent for positioning fabric, stays stable while sewing and pressing, and is easy to sew through and remove cleanly.
It is also described as sustainably produced and fully recyclable, with a free Mountain Tub PDF pattern included with every purchase. One caution: the page notes that the listing is archived and left up for reference, so stock may have changed. Both size variants showed as available when the page was read.
- Pros: weight stated, 100 sheets, Letter and A4 sizes, semi-transparent, stable while pressing per the page.
- Cons: UK maker, listing notes it is archived, shipping handled by the seller.
- Buy if: you want a stated, light weight and the ability to see fabric position.
- Skip if: you need a seller that clearly shows current stock in the United States.
It’s Sew Emma 12 inch Blank Foundation Paper Pad
The It’s Sew Emma 12 inch Blank Foundation Paper Pad is for quilters who draw their own paper-piecing blocks rather than print them. It is the only pad in this guide described by block size, and the page frames it as paper for simple strings or stars.
The page lists 42 sheets of lightweight foundation paper that is easy to sew and tear, in 13 inch square sheets. It says the paper is ideal for blocks up to 12 inches finished, and opens with a prompt to draw your own quilt blocks for paper piecing, from simple strings to stunning stars.
The page does not say whether the sheet is meant for a printer, so do not assume it feeds through one. It gives no weight, no pressing note and no statement about transparency. The page also says third-party sales need approval, which is a seller rule rather than a product feature.
- Pros: sized for blocks up to 12 inches finished, 42 sheets, lightweight and easy to sew and tear per the page.
- Cons: printer use not stated, no weight or transparency stated.
- Buy if: you design string blocks or large stars by hand.
- Skip if: you work from printed patterns and want printer-tested wording.
Sulky Tear-Easy stabilizer
Sulky Tear-Easy stabilizer is the different pick: a non-woven tear-away stabilizer rather than a paper sheet. It suits quilters who want a foundation that feels more like fabric, and who are comfortable marking or transferring the pattern onto it themselves.
The retailer page read for this guide lists Sulky Tear-Easy as white, 20 x 1 yd, described as temporary, lightweight and soft, with removal that avoids pulling, tearing or distorting stitches. It lists quilting uses, including foundation piecing and use as a removable design template, and says to tear away one layer at a time.
The page says the stabilizer suits projects where wetting or heating is not the preferred removal method, and says Sulky stabilizers are acid and lead free. It does not state fiber content, so the page gives no way to know how it will behave under a hot iron beyond the maker’s own removal wording.
- Pros: described for foundation piecing, soft, removes by tearing one layer at a time, no wetting or heating needed.
- Cons: fiber content not stated, you mark the pattern yourself, not a printer paper.
- Buy if: you want a softer foundation than printed paper.
- Skip if: you want to feed printed sheets straight from a printer.
Buying guide for foundation and piecing paper
Choosing paper for piecing comes down to a few decisions: how you get the pattern on it, how thin it is, whether you can see through it and how well it tears away. The sections below explain each one in general terms, without promising results from any single brand.
Foundation paper versus English paper templates
Two different crafts both get called paper piecing, and the right paper depends on which one you mean. Foundation paper piecing stitches fabric through paper on a printed line. English paper piecing wraps fabric around card shapes. This guide covers the first kind only.
In foundation piecing, the paper is a temporary stitching guide. You sew along the printed lines, trim the seam allowance and then remove the paper after the block is joined to others. The paper therefore needs to be thin enough to perforate and tear cleanly, yet firm enough to hold its shape during sewing.
In English paper piecing, thicker card shapes such as hexagons stay inside the fabric while you hand-stitch the edges, and some are removed afterward. Because the two crafts use different materials, buying hexagon templates when you need printable foundation paper is a common mix-up worth avoiding.
Printer compatibility and print quality
If you plan to print patterns, the first thing to confirm is that the paper is described for your type of printer. Most of the printable papers in this guide say they work with inkjet and laser printers or copy machines, but a blank pad may not make that claim at all.
Print one test sheet before you commit a whole pack. Check that the lines are crisp and that the pattern prints at actual size, with no page scaling, because a shrunk pattern makes every seam too small. A ruler on the printed test block is the quickest way to catch it.
A flimsy sheet can crease or jam if the printer is hard on paper, and a very absorbent sheet can let ink spread. Where a page says the sheet is non-coated, that usually means the ink is absorbed rather than sitting on a slick surface, which can reduce smearing but still calls for letting prints dry.
Choosing the best paper for piecing quilts by block type
The best paper for piecing quilts depends on the block as much as the brand. Small, intricate blocks reward a see-through sheet, large blocks need a bigger sheet or taped sections, and hand-drawn blocks need a blank pad large enough for the finished size.
For printed patterns up to the size of a letter sheet, standard foundation paper is enough. For wider designs, a legal-size sheet exists for Carol Doak’s paper, or you can print in sections and tape them. For hand-drawn or oversized blocks, a pad sized in advance, such as the 13 inch square sheets, removes the need to join pieces.
If you struggle to see where the next piece of fabric should sit, a translucent or semi-transparent sheet helps, since you can hold the stack to the light. If your fabrics are dark or heavy, a very thin sheet may still be hard to see through, so a bright light under the paper is the usual fix.
Stitch length, needles and tearing away
Sewing through paper is gentler on the paper if you use a shorter stitch than your normal piecing setting, because the closely spaced holes make the paper perforate like a postage stamp. The product pages here do not give stitch numbers, so use your machine manual and a scrap.
A new needle helps because dull needles tug at paper and fabric. To remove paper, fold it back along the stitched line and tear toward the seam, supporting the stitching with the other hand. Tear after the block has been joined to its neighbors, not before, so the paper keeps the seams stable.
Small leftover bits of paper in the seams can usually be picked out with tweezers. Tearing firmly stitched seams from the wrong direction can stretch them, which is why short, controlled tears along the line are the standard approach. None of this is stated by the maker pages, so treat it as general technique.
Pressing and heat
Heat affects paper piecing in two ways: ironing flattens seams, but heat and steam can distort the paper or affect the ink. Several pages read for this guide say nothing about pressing at all, so the sensible default is a dry iron, a press cloth and a test on a scrap.
Printer ink can transfer, so a press cloth protects the ironing board cover from marks. Finger-pressing small seams between steps is common in the craft and avoids heat on the paper. Patterntrace states that its paper is stable while sewing and pressing, which is the only pressing statement on the pages read.
Steam is generally the bigger risk because moisture makes paper wavy and can make ink spread. If you want to avoid wetting or heating altogether, Sulky states that Tear-Easy suits projects where wetting or heating is not the preferred removal method.
Common mistakes to avoid
The most common mistakes are printing at the wrong scale, removing paper too early, tearing from the wrong direction and buying the wrong kind of paper for the craft. A few small habits, all of them free, avoid most of these problems before they start.
Check the printer scale on a test sheet before you print a whole block set. Keep the paper in place until the block is joined to its neighbors so seams stay stable. Trim fabric to leave a seam allowance before you tear, so you are not pulling against uneven edges and stretching stitches.
Buy a small pack first if you have never tried a particular paper. The Simple Foundations pack holds fewer sheets than the others, which makes it a manageable first trial. Check the pack count on the listing you are buying from, because pages describe one seller’s pack.
Frequently asked questions
These answers stay with what the product pages state and with general paper-piecing practice. Where a page does not say something, each answer says so plainly rather than guessing, and any step that touches your good fabric is best tried on a scrap first.
What is the best paper for piecing quilts if I print at home?
For home printing, Carol Doak’s Foundation Paper is the most directly described option, with a page that names inkjet and laser printers and copy machines. Simple Foundations vellum and Patterntrace also state printer compatibility, so they are alternatives if you want a see-through sheet.
Whichever you choose, print one test sheet and measure it. If the printed block is not the size the pattern states, check your printer settings for scaling before you print the rest. A paper that feeds well in one printer model may behave differently in another.
Can I use regular printer paper for paper piecing?
The maker pages read for this guide do not discuss ordinary printer paper, so there is no sourced answer from them. General advice among quilters is that heavier paper is harder to tear and can distort seams, which is why thin foundation paper exists.
If you try regular paper, test on a scrap block first and judge how easily it tears and how the seams look. Foundation papers are described as lightweight specifically so that they do not add bulk or fight the stitching, which is the problem ordinary paper may cause.
Do I have to remove the paper before washing the quilt?
In foundation piecing, the paper is a temporary guide and is generally removed once blocks are stitched together, not left in the finished quilt. Carol Doak’s and Simple Foundations pages both describe the paper as tearing away easily, which points to removal before quilting.
Leaving paper in during washing can leave bits in the seams, and paper can also add bulk. Follow the pattern instructions you are using, and remove the paper before layering the quilt, because torn paper tucked inside stitching is harder to take out later.
Is vellum better than regular foundation paper?
Vellum is not better in every case; it is different. Its advantage, per the Simple Foundations page, is that it is see-through so you can trace without a light box. Standard foundation paper, as described by Carol Doak’s page, is lightweight, absorbent and non-coated and comes in larger packs.
If seeing fabric through the sheet is your biggest frustration, vellum is worth trying. If you print high volumes and rarely struggle with placement, standard paper is usually enough. The pages do not compare the two, so this comes down to your own preference after a trial block.
Can I use a stabilizer instead of paper?
Sulky lists foundation piecing among the quilting uses of Tear-Easy, so a stabilizer can be used as a foundation according to the maker’s own wording. The product is a non-woven tear-away that you remove one layer at a time, and it is not sold as a printer paper.
The main difference is feel: it is soft, so it handles more like fabric than paper. You will usually mark the pattern on it yourself. Because the fiber content is not stated on the page read, test how it holds seams before committing to a whole quilt.
Conclusion
For most quilters printing patterns at home, Carol Doak’s Foundation Paper is the straightforward pick, with a 100-sheet pack and clear printer wording. Choose Simple Foundations vellum or Patterntrace to see fabric through the sheet, the blank pad for hand-drawn blocks, and Sulky for a softer foundation.
Write Your Review
No reviews yet. Be the first to share your experience!