Key takeaways
- Seven quilt-making materials compared: Kona cotton, Warm and Natural batting, Aurifil thread, Olfa and Fiskars cutting tools and Wonder Clips, with key specs.
Starting a quilt means buying fabric, batting, thread and cutting tools, and the wrong mix makes the first project harder than it needs to be. This guide looks at the best materials for making quilts across seven products, using each page for fiber, size and feature wording, plus two beginner guides for context.
Quick verdict
The safest starting kit is 100% cotton fabric such as Kona Cotton Solids, cotton batting such as Warm and Natural, 50wt Aurifil cotton thread and a 45 mm rotary cutter with a cutting mat. Wonder Clips stand in for pins, and a quilting ruler finishes the kit.
Two beginner guides read for context agree on the basics: use 100% quilting cotton, a rotary cutter, a cutting mat, an acrylic ruler about 6 by 24 inches, and a sewing machine with a straight stitch. One guide adds that cotton thread is ideal for piecing.
None of these product pages promises a result, and you should follow the care label of any fabric you buy. Wash and test a small piece before committing to a full quilt, and check dimensions on the exact listing you buy from.
Comparison table
The table lists each material by category, the key spec the page states, who it suits and the main trade-off. Where a page does not give a detail such as weight or care, the table leaves it out rather than guessing, so check the listing itself for anything missing.
| Material | Category | Key spec as stated | Best for | Main trade-off |
|---|---|---|---|---|
| Kona Cotton Solids | Fabric | 100% cotton, over 365 colors | Solid blocks and backgrounds | Weight not stated |
| Warm and Natural Needled Cotton Batting | Batting | 100% cotton, needle-punched, 3 to 5 percent shrinkage | Traditional, flat quilts | Shrinks on first wash |
| Aurifil 50wt Cotton Mako Thread | Thread | 100% cotton, 50wt, 1,422 yards | Piecing | Uses are not listed on the page |
| Olfa 45mm Quick Change Rotary Cutter | Cutting | 45mm, tungsten carbide tool steel blade | Right or left hand | Blade needs changing |
| Olfa 18 x 24 Cutting Mat | Cutting | Self-healing, double-sided, 18 x 24 inches | Cutting yardage | Takes table space |
| Fiskars 3pc Rotary Cutting Set | Cutting set | 45mm cutter, 6 x 24 inch ruler, mat | One-purchase kit | Mat size listed inconsistently |
| Clover Wonder Clips | Notion | 50 clips, alternative to pins | Thick layers and binding | Do not replace all pins |
How we selected the best materials for making quilts
Each material here has a product page that was open and listing it when read, and the pages are recorded in the sources file. Only wording that appears on those pages is repeated, and no spec comes from memory of other products or from an unopened search result.
The selection questions were practical. Does the page state the fiber, does it say what the product is meant for, and are sizes or counts given? Items that the two beginner guides name as core materials were prioritized, since they cover the basics a first quilt needs: fabric, batting, thread, cutting tools and a way to hold layers.
A few items were read and then left out or adjusted. The Fiskars set page lists the mat size as 18 by 24 inches in its intro but as 12 by 18 inches in its features, so the mat size is flagged rather than repeated. Warm and Natural was read through a retailer’s product guide rather than the maker’s page.
The writer is not a quilter, and nothing here describes hands-on use. The guide covers what makes a good first kit and leaves the personal preferences, such as favorite fabric lines or thread brands, to you after you have made a few quilts.
Best materials for making quilts: our seven picks
The picks follow the order you would shop in: fabric, batting, thread, then cutting tools and clips. Each entry says who it suits, what the page states, the limits, pros, cons and a buy-if or skip-if line, with no promise beyond the wording on the page.
Kona Cotton Solids
Kona Cotton Solids from Robert Kaufman is the plain, dependable choice for fabric, a solid cotton quilters use for blocks, sashing and backgrounds. It suits first-time quilters who want colors that coordinate easily without fighting a busy print. Solid colors also keep early mistakes easy to see.
The retailer page calls it premium quilting fabric made from 100% premium cotton, available in over 365 colors, and says it is highly colorfast and resists fraying. Widths listed include 42 to 45 inches, 60 inches and 108 inches, and the page says many shades are OEKO-TEX certified, so not all colors are.
The page gives no weight and no care instructions, so follow the label on the fabric you buy and test a swatch. A beginner guide read for context says quilting cotton is woven to a weight that presses crisply and holds a seam, and advises against apparel cotton and bedsheets for quilts.
- Pros: 100% cotton, over 365 colors, wide widths for backing.
- Cons: weight and care not stated on the page, only many shades are certified.
- Buy if: you want solids that mix easily.
- Skip if: you want printed fabric for visual interest.
Warm and Natural Needled Cotton Batting
Warm and Natural Needled Cotton Batting from The Warm Company is a flat, traditional cotton batting that suits quilters who like a vintage, crinkled look after washing. It suits bed quilts and lap quilts where breathable cotton fill matters more than loft.
A retailer’s product guide calls it one of the 100% cotton needle-punched battings from the Warm Company, needle-punched rather than chemically bonded, which creates a stable batting. It says to expect 3 to 5 percent shrinkage and the characteristic vintage crinkle on the first wash. Package sizes in inches are baby 45 x 60, twin 72 x 90, full 90 x 96, queen 90 x 108 and king 124 x 120.
Care on that page is machine wash in warm water on a gentle cycle, dry on low to medium heat and do not dry clean. It also suggests unrolling the batting and letting it relax for 30 to 60 minutes before loading it on a frame. The page does not state the maximum quilting distance, so follow the package.
- Pros: 100% cotton, needle-punched, sizes from baby to king, care stated.
- Cons: shrinks 3 to 5 percent on first wash, quilting distance not stated on the page.
- Buy if: you want a traditional cotton batting.
- Skip if: you want a lofty, puffy look.
Aurifil 50wt Cotton Mako Thread
Aurifil 50wt Cotton Mako Thread is a fine cotton thread suited to piecing, and the Fat Quarter Shop page for the black spool gives the key facts clearly. It suits quilters who want one thread weight for piecing across many projects. It is the quietest, most reliable part of the kit.
The page lists it as 50wt Aurifil Black 100% Cotton Mako Thread, item MK50-2692, with thread material 100% cotton, thread type 50wt, and 1,422 yards on one spool. It describes the product as 1,422 yards of 50wt Aurifil 100% cotton thread and gives no list of uses.
A beginner guide read for context says 100% cotton thread designed for quilting is ideal, and that polyester can work for piecing. Those are general statements, not maker claims, and the Aurifil page does not say what the thread is best used for.
- Pros: 100% cotton, 50wt, large 1,422 yard spool, clear spec on the page.
- Cons: uses not listed on the page, black shows on light fabric.
- Buy if: you want a single cotton thread for piecing.
- Skip if: you want to match many fabric colors with small spools.
Olfa 45mm Quick Change Rotary Cutter
The Olfa 45mm Quick Change Rotary Cutter is the cutting tool that makes straight, repeatable strips possible, and a rotary cutter is named as core by both beginner guides. It suits quilters who cut many pieces and want a comfortable, left or right handed tool.
The Fat Quarter Shop page lists the cutter as Olfa number RTY2NS, with a 45mm blade, an ergonomic comfort grip, an anti-slip rubber handle, a tungsten carbide tool steel blade, a split blade cover and a length of 7 inches. It says it works left-handed or right-handed.
A guide read for context says a 45mm blade size balances control and speed, and another says to change the blade more often than feels reasonable. Rotary blades are sharp, so close the cover after every cut, and the page lists no usage cautions of its own.
- Pros: 45mm blade, ergonomic grip, left or right handed, blade cover.
- Cons: blades dull and need replacing, a sharp tool needs care.
- Buy if: you want a reliable standard-size cutter.
- Skip if: you only plan to cut with scissors.
Olfa 18 x 24 Cutting Mat
The Olfa 18 x 24 Cutting Mat is a reversible mat that the page says is self-healing, protecting the table and gives a grid for squaring up. It suits quilters who cut yardage and want a mat big enough for fabric folded in half. It is the surface under every straight cut you make, so size and flatness matter more than they seem to at first.
The page says the mat is self-healing, double-sided and reversible, with guidelines on one side and a solid surface on the other, in a size of 18 by 24 inches. It lists bias lines at 30, 45 and other angles and says the measurements are in inches.
A beginner guide read for context says a self-healing mat gives you a gridded reference for squaring up. Another guide says a 12 x 18 inch mat is a good starter size, so choose by the space you have and the fabric you cut.
- Pros: reversible, 18 x 24 inches, inch grid, page says self-healing.
- Cons: large for small tables, needs flat storage.
- Buy if: you cut full-width fabric.
- Skip if: space is tight and a smaller mat would do.
Fiskars 3pc Rotary Cutting Set
The Fiskars 3pc Rotary Cutting Set bundles a mat, a 45mm rotary cutter and a quilting ruler, which suits beginners who want one purchase instead of three. It is the only ruler in this guide, with a 6 x 24 inch acrylic ruler as stated. It is a kit, not a single tool.
The retailer page lists a 45mm Fiskars Rotary Cutter and a 6 x 24 inch Fiskars Acrylic Quilting Ruler, plus a mat the page says is self-healing, with an easy-to-read measuring grid, bias lines, and a surface that is easy to clean. It says the mat suits square blocks, triangles and star shapes.
The page contradicts itself on the mat size: the intro says 18 by 24 inches while the features list says 12 by 18 inches, so confirm the size before buying. It also says the set ships from a third party. A beginner guide read for context says one good ruler covers most cuts, and names 6 x 24 inches.
- Pros: mat, cutter and ruler in one set, 6 x 24 inch ruler named by both guides.
- Cons: mat size listed inconsistently, third-party shipping.
- Buy if: you want a complete cutting starter set.
- Skip if: you already own a cutter and mat.
Clover Wonder Clips
Clover Wonder Clips, sold here as a 50 piece pack, are a clip alternative to pins that suits thick layers and binding. They fit quilters who dislike pricked fingers or who sew through bulky seams where pins distort the fabric. They are optional but handy.
The Fat Quarter Shop page says Wonder Clips open wide to hold layers of fabrics, are positioned as an alternative to pins especially for quilts, handbags and heavyweight fabrics, and have a flat base for easy feeding to the presser foot. The pack includes 50 clips.
A beginner guide read for context says quilting pins with glass heads or small clips work best without distorting delicate fabrics. The page does not say clips replace pins in every case, so keep a few pins for seam matching and use clips where layers are thick or bulky.
- Pros: opens wide, flat base feeds to the presser foot, 50 clips per pack.
- Cons: bulky for tiny seams, only one pack size read here.
- Buy if: you bind quilts or sew through thick layers.
- Skip if: you prefer pins for precise matching.
Buying guide for quilt-making materials
Choosing materials for a quilt comes down to fiber, size and compatibility, and the right mix depends on your pattern and how the quilt will be used. The sections below explain the main decisions in general terms and point back to what the pages and guides say.
Choosing quilting fabric
The two beginner guides read for this article agree on one rule: start with 100% quilting cotton. One explains that quilting cotton is woven to a weight that presses crisply and holds a seam, and advises against apparel cotton and bedsheets. Fabric is where most of the quilt’s character comes from.
Precuts help beginners. One guide describes charm packs as forty-two 5 inch squares, jelly rolls as forty 2 1/2 inch strips, layer cakes as forty-two 10 inch squares and fat quarters as 18 x 22 inch cuts. Precuts coordinate colors and save cutting, though they limit size and layout choices.
Plan yardage before shopping. The same guide gives a 48 x 60 inch lap quilt as needing about 3 yards for the top, 3 1/4 yards for the backing and about 1/2 yard for binding, with backing at least 4 inches past every edge of the top. Follow your own pattern for exact amounts.
Choosing the best materials for making quilts: batting
Batting is the fluffy middle that makes a quilt warm, and the choice shapes the look, the drape and the care. One guide says cotton batting is breathable and natural but can shrink slightly, while polyester batting is loftier and washable but less natural feeling.
The Warm and Natural page states 3 to 5 percent shrinkage on the first wash, which produces a crinkled look some quilters like and others avoid. Pre-washing is a choice, and the page does not recommend it, so decide based on the look you want and what your pattern states.
Match batting to size. The same guide specifies a crib-size batting for a 48 x 60 inch lap quilt, and the Warm and Natural page lists baby, twin, full, queen and king packages. Choose a batting a few inches larger than the quilt top on every side.
Choosing thread
Thread weight affects how visible stitches are. A beginner guide says 100% cotton thread designed for quilting is ideal, and that polyester can work for piecing. The Aurifil page lists 50wt, which is the weight the page names. Fiber and weight both matter for piecing.
Match fiber to fabric. Cotton thread suits cotton fabric, and polyester can work for piecing, according to one guide. A neutral color that blends with most of your fabrics, such as a light gray or beige, avoids changing spools for every block.
Use a new needle and clean the machine before long sewing sessions. The pages here do not describe needles, so check your machine manual for the right size. Good thread cannot make up for a worn needle or a poorly tensioned machine.
Cutting tools and notions
A rotary cutter, a self-healing mat and an acrylic ruler are the cutting trio that both guides name. The guides give about 6 x 24 inches as the versatile ruler size, 45mm as the balanced blade size and 12 x 18 inches as a starter mat size. Add tools slowly.
Sewing needs a machine that sews a straight stitch and a quarter-inch presser foot, which one guide calls the foot that makes the most important seam in quilting repeatable. A walking foot is described as a soon-to-buy item that feeds three layers evenly when you quilt.
An iron and a firm pressing surface complete the list, along with a seam ripper. Clips, gloves and marking pens are described by one guide as nice, not necessary. Start with the basics and add tools as your projects show you what you need.
Basting and organizing a first quilt
Basting holds the quilt top, batting and backing together while you quilt, and sparse basting is linked to puckers. One guide recommends curved safety pins every 3 to 4 inches or basting spray, and taping the backing wrong side up on a hard floor or table.
Press seams as you go, and cut all pieces before you start sewing so you can check you have enough. Keep scraps from the same fabric for testing marking pens, thread tension and washing. Label the leftover fabric so you can repair the quilt later.
Write down which materials you used, including fiber and care. The care label of the fabric and the batting wrapper tell you how to wash the finished quilt, and the more closely the layers match in care needs, the fewer surprises you will have later.
Frequently asked questions
These answers stay with what the product pages and two beginner guides state, plus general quilting practice. Where a page does not say something, each answer says so plainly rather than guessing, and anything that touches a finished quilt is best tried on a scrap first.
What are the best materials for making quilts as a beginner?
Both beginner guides read for this article point to 100% quilting cotton, batting, thread, a rotary cutter, a cutting mat, an acrylic ruler and a sewing machine with a straight stitch. Clips, gloves and marking pens are described as nice, not necessary. Start small.
That list matches the seven products here: Kona Cotton Solids for fabric, Warm and Natural for batting, Aurifil for thread, Olfa or Fiskars for cutting, and Wonder Clips for holding layers. Buy the basics first and add extras as your projects call for them.
Should I wash fabric before making a quilt?
The pages read do not give a prewash instruction for Kona, which says only that the fabric is highly colorfast and resists fraying. Whether to prewash is a quilter’s choice, and the care label on your fabric is the place to start. Check the care label first.
Test colorfastness in a hidden spot or on a swatch before committing. If you mix fabrics that may shrink differently, or you plan to use cotton batting that shrinks 3 to 5 percent, think about how the whole quilt will behave on its first wash.
Is cotton or polyester batting better?
Neither is better in every case. One guide says cotton batting is breathable and natural but can shrink slightly, and polyester batting is loftier and washable but less natural feeling. The Warm and Natural page states 3 to 5 percent shrinkage. The right pick depends on your goals.
Choose by the look you want and how the quilt will be cared for. A cotton batting gives a flatter, crinkled look after washing, while a polyester batting gives more loft. Read the care instructions on the batting you buy, since each product states its own.
How much fabric do I need for a quilt?
It depends on the size and pattern. One beginner guide gives a 48 x 60 inch lap quilt as needing about 3 yards for the top, 3 1/4 yards for backing and about 1/2 yard for binding, and says backing should extend at least 4 inches past every edge. Always check your pattern.
Use your pattern’s yardage list where one exists, and buy a little extra for mistakes. Precuts such as charm packs and jelly rolls state their piece counts and sizes, which makes planning easier for first projects.
Do I need a walking foot to make a quilt?
One guide rates a walking foot as a soon purchase rather than a first-day purchase, saying it feeds all three layers evenly when you quilt. It is not named as required for piecing, where a quarter-inch presser foot matters more. Check your machine too.
Check your machine manual for compatible feet before buying. The product pages in this guide do not cover sewing machines or feet, so this answer comes from the beginner guide and general practice rather than from a maker statement.
Conclusion
A solid first kit is 100% cotton fabric such as Kona Cotton Solids, cotton batting such as Warm and Natural, 50wt Aurifil cotton thread, a 45mm Olfa cutter with a cutting mat and Wonder Clips. Check each listing, follow care labels and test a swatch before you cut. Add the clips and ruler as you go.
Write Your Review
No reviews yet. Be the first to share your experience!