Key takeaways
- Compare six mixers for multi person podcast recording with up to six mic inputs, individual headphone outputs, sound pads, call-in options and multitrack files.
The mixers for multi person podcast recording in this guide all seat more than one voice at a microphone at the same time: each one pairs multiple mic inputs with individual headphone outputs, so every person at the table can hear themselves and each other while the show records a separate track per voice.
Quick verdict
Short on time? The Zoom PodTrak P8 seats the most people, with six mic inputs and six headphone outputs. The Tascam Mixcast 4 is the most automated four-person station, and the Zoom LiveTrak L-8 adds three custom monitor mixes for panels that argue about levels.
Multi person shows fail in predictable ways: a guest cannot hear themselves, one loud voice buries the others, or the recording comes home as a single stereo file that cannot be fixed in editing. The six units here attack those problems directly. All of them record multitrack files or send separate channels to a computer, all give each participant a headphone feed, and most add sound pads, call-in channels for remote guests and per-channel processing. They split into two sizes: four-to-six-mic stations for full panels, and two-mic units for pairs who add remote guests by phone or USB.
The headphone count matters as much as the mic count. The PodTrak P8 gives all six participants their own output, the Mixcast 4 and Rodecaster Pro II cover four people each, and the LiveTrak L-8 goes further with three custom monitor mixes plus the main mix, so each side of the table can hear a different balance. The two-mic Mackie and Yamaha units instead spend their budget on automatic level help and streaming features for smaller, regular pairings.
| Product | Mic inputs | Headphone outputs | Recording |
|---|---|---|---|
| Zoom PodTrak P8 | 6 | 6 | Up to 13 tracks to SD card |
| Zoom LiveTrak L-8 | 6 | 4 | 12 tracks to SD card |
| Tascam Mixcast 4 | 4 | 4 | 14 tracks to SD card |
| RODE Rodecaster Pro II | 4 | 4 | Multitrack to microSD, USB storage or computer |
| Mackie DLZ Creator XS | 2 | 2 | Multitrack to SD card or USB drive |
| Yamaha AG08 | 2 | 2 | Multitrack over USB to computer |
How we selected
Every pick had to handle more than one person at once: at least two microphone inputs and at least two headphone outputs on the same unit, stated on its product page. Solo streaming interfaces and mixers that need a separate headphone amplifier for a panel were left out of this guide.
From there, the list favors features that keep a group recording under control: multitrack recording so each voice can be edited alone, per-channel processing for uneven voices, automatic mixing or level assistance for shows without an engineer, and a call-in route with mix-minus so a remote guest does not echo. Recording format and resolution were compared as published, because panels that edit heavily benefit from 24-bit files, while long talk shows may value simpler 16-bit workflows. The final six span four brands of dedicated podcast stations plus two compact streaming mixers for pairs.
Six mixers for multi person podcast recording
The six units below are ordered by how many people they seat at microphones, from six down to two. Each entry covers the mic and headphone counts first, then the recording path, the group-friendly features like auto-mix and call-ins, and the published audio figures that matter for voices recorded in the same room.
Zoom PodTrak P8
The PodTrak P8 seats the largest panel in this guide: six mic inputs with XLR connectors and optional phantom power, and six headphone outputs, so a host and five guests each get a microphone and their own headphones without extra hardware or splitters.
The Zoom preamps provide up to 70 dB of gain, enough for low-output dynamic broadcast microphones, and each mic channel carries a limiter, a low cut filter, tone control and a compressor with a de-esser, which keeps six different voices under control without a computer. Every channel has its own volume slider, mute button and ON AIR indicator; turning ON AIR off keeps a channel audible in headphones but out of the recording, which suits sidebar conversations and guest preparation during breaks. Recording runs to an SD card at up to 13 tracks simultaneously in WAV at 44.1 kHz and 16-bit, and nine assignable sound pads with four banks hold 36 clips, with 13 sounds preloaded. A dedicated channel records phone calls, channel 6 can switch to USB mode for a computer guest, and both routes carry mix-minus; an optional Bluetooth adapter adds wireless phone guests. The 4.3-inch color touchscreen runs the unit, which also works as a 2-in/2-out USB audio interface.
- Mic inputs: 6 XLR with +48 V phantom power, up to 70 dB gain
- Headphone outputs: 6, plus balanced L/R speaker outputs
- Recording: up to 13 tracks to SDHC card, WAV 44.1 kHz, 16-bit
- Per-channel: limiter, low cut, tone control, compressor/de-esser, ON AIR button
- Sound pads: 9 pads, 4 banks, 13 preloaded sounds
- Power: 4 AA batteries (up to 2 hours recording), AC adapter or USB bus power
- Dimensions 295 x 248 x 61 mm; weight 1.43 kg
Pick the P8 for panel shows, actual-play groups and classrooms where six seats is the point. Its 16-bit recording is the trade-off against the 24-bit stations here, and battery life on AAs is short, so longer sessions belong on the adapter or USB power.
Zoom LiveTrak L-8
The LiveTrak L-8 is an 8-channel mixer and multitrack recorder built for podcasters who think like engineers: six combo mic and line inputs with six independent Zoom preamps, two further line inputs, and four headphone outputs for the table and the producer.
Those four headphone outputs carry three custom monitor mixes plus the main mix, so a host, a producer and two guests can each hear a different balance, a feature none of the other units here match. Recording captures 12 tracks simultaneously with a separate file for each input, at up to 24-bit/96 kHz to an SD card, with 10-track playback for review. It also works as a 12-in/4-out USB audio interface while recording to the card, so a computer can run a backup or a stream at the same time. Six assignable sound pads hold 13 preset sounds, seven scene memories store complete mixes for recurring shows, and three-band EQ with a low-cut function shapes each channel. Remote guests join by phone through the TRRS connection with an included cable, with the mix-minus function preventing echo and feedback, or over USB from call apps.
- Channels: 8 (6 combo mic/line, 2 line); 6 independent preamps with phantom power
- Headphone outputs: 4, carrying 3 custom monitor mixes plus the main mix
- Recording: 12 tracks to SD card, up to 24-bit/96 kHz; 10-track playback
- USB audio interface: 12-in/4-out, works while recording to SD
- Sound pads: 6 assignable, 13 preset sounds; 7 scene memories
- Power: 4 AA batteries (up to 2.5 hours), USB power supply or included AC adapter
Choose the L-8 when the panel needs different headphone mixes or when the same desk also records small music sessions. It asks more of the operator than the automatic stations: there is no touchscreen and no auto-mix, so levels are set by hand.
Tascam Mixcast 4
The Mixcast 4 is a production station sized for exactly four people: four mic inputs over balanced XLR and TRS combo jacks, four headphone outputs with independent volume controls, and an auto-mixing function that adjusts levels and sets mic priority across the table.
That auto-mix is the headline for groups, because it keeps a four-way conversation balanced without anyone riding faders. Mic channels carry a choice of condenser or dynamic settings with 48 V phantom power, easy sound settings or a two-band semi-parametric EQ, a compressor, a de-esser and a noise suppressor, with reverb available on one mic channel. Recording runs to 14 tracks directly to an SD card (12 channels plus the stereo mix) in WAV at 48 kHz and 24-bit, and the unit doubles as a 14-in/2-out USB audio interface. Eight sound pads across eight banks hold up to 64 sounds for jingles and effects, a talkback button lets the operator speak to the participants only, and a mark button flags moments during recording. Guests join by phone or app through Bluetooth, USB or a TRRS cable, all with mix-minus. A 5-inch color touchscreen runs the station, supported by the Tascam Podcast Editor software.
- Mic inputs: 4 combo XLR/TRS with auto-mix; gain range 66.5 dB
- Headphone outputs: 4 with independent volume; 45 mW + 45 mW maximum
- Recording: 14 tracks to SD card, WAV 48 kHz, 24-bit
- USB audio interface: 14 inputs, 2 outputs over USB Type-C
- Sound pads: 8 pads, 8 banks, up to 64 sounds; talkback and mark buttons
- Mic figures: equivalent input noise -125 dBu or less; S/N ratio 101 dB
- Dimensions 375 x 57 x 264 mm; weight 2.55 kg
The Mixcast 4 suits a fixed four-person show that records in one room and edits afterward: the 14-track files and per-voice processing give an editor plenty to work with. Shows that regularly seat five or six people should step up to the Zoom pair.
RODE Rodecaster Pro II
The Rodecaster Pro II covers four people at microphones with four Neutrik combo inputs, four high-power headphone outputs and balanced line outputs for monitors, inside a production studio with nine individually assignable channels for the whole panel.
Its Revolution Preamps are the strongest voice front end in this guide on paper: 76 dB of gain with an equivalent input noise of -131.5 dBV, which the maker says removes the need for microphone boosters or lifters even with low-output dynamic mics. Each channel runs APHEX processing: a compressor, noise gate, high-pass filter, de-esser and three-band equaliser, plus the Aural Exciter, Big Bottom and Compellor emulations. Six physical faders and three virtual faders control the nine channels, and eight SMART pads with bank switching (64 actions in total) can fire sounds, voice effects, MIDI commands and mixer actions such as fades. Two computers or mobile devices connect at once through dual USB-C interfaces, a built-in wireless receiver takes up to two RODE Series IV transmitters for cable-free guests, and Bluetooth handles phone calls. Recording runs multitrack or stereo to a microSD card, USB storage or a computer, and a 5.5-inch touchscreen with a rotary encoder runs the console.
- Mic inputs: 4 Neutrik combo jacks; Revolution Preamps, 76 dB gain, -131.5 dBV EIN
- Channels: 9 assignable, 6 physical faders and 3 virtual faders
- Headphone outputs: 4 high-power, plus balanced 1/4-inch line outputs
- Processing per channel: APHEX compressor, gate, high-pass filter, de-esser, 3-band EQ
- SMART pads: 8 pads, 8 banks, 64 actions; voice effects and MIDI commands
- Connections: dual USB-C, Bluetooth, built-in receiver for 2 wireless transmitters
- Display: 5.5-inch touchscreen with haptic feedback and rotary encoder
Pick the Rodecaster Pro II when four regular voices deserve the deepest processing and the quietest preamps here, and when wireless guests or a second computer are part of the show. It is the most configurable unit in this guide, which also makes it the one with the most to learn.
Mackie DLZ Creator XS
The DLZ Creator XS is the compact option for two people at microphones: two discrete XLR and TRS combo inputs with Onyx80 preamps offering up to 80 dB of gain, two independent headphone outputs with customized mixes for each guest, and extra channels for devices.
What makes it a multi person tool despite the two mic inputs is the help it provides. The Mix Agent assistant guides setup and sound check, and AutoMix manages levels for up to four mics so everyone can be heard even when they speak at the same time, which the maker aims at shows with multiple hosts or guests. A Bluetooth-connected smartphone joins through mix-minus with no audible echo for the caller, and further stereo channels take a dual TRS input, a 1/8-inch input and a bi-directional Bluetooth channel. Three control modes (Easy, Enhanced and Pro) scale the interface to the operator. Processing includes a three-band parametric EQ, noise gate, de-esser, compressor, reverb and delay, plus voice-changing effects and customizable pads for samples and commands. It records multitrack audio to an SD card or USB flash drive, or streams and records through its 14×4 USB-C audio interface, all run from a 7-inch touch display.
- Mic inputs: 2 combo XLR/TRS; Onyx80 preamps, up to 80 dB gain
- Headphone outputs: 2 independent, with customized mixes per guest
- AutoMix level management and Mix Agent setup assistant
- Channels: 2 mic, stereo TRS, stereo 1/8-inch, bi-directional Bluetooth
- Processing: 3-band parametric EQ, gate, de-esser, compressor, reverb, delay
- Recording: multitrack to MicroSD or USB flash drive; 14×4 USB-C interface
- Display: 7-inch full-color touch display with anti-glare coating
Choose the XS for a two-host show that adds phone guests and wants the machine to manage levels and setup. Panels of three or four at microphones outgrow it immediately, and those shows belong on the four-input stations above.
Yamaha AG08
The AG08 is Yamaha’s flagship streaming mixer, and its multi person case rests on two condenser mic inputs with two headphone outputs that can be used simultaneously, a layout the maker describes for two people broadcasting a conversation or interview.
Channels 1 and 2 are combo mic and line inputs with +48 V phantom power; channel 1 also accepts a headset microphone, and channel 2 adds a guitar input. Three stereo inputs with assignable faders take line sources or USB audio, channel 7/8 is a TRRS smartphone connection, and mix-minus on channels 1 and 2 keeps callers echo-free. Two independent headphone monitor channels let a second person, or a producer managing the audio, listen alongside the host. Onboard DSP provides a voice changer, amp simulator, compressor, EQ, reverb, delay, a ducker that lowers playback channels under the voices, and a maximizer, with detail control through the AG08 Controller app. Six sound pads trigger samples, four preset buttons switch channel 1 effects, and the USB connection carries 8-in/14-out audio at up to 48 kHz and 24-bit, including direct outs for multitrack recording in a DAW. Monitor outputs on XLR and TRS plus a TRS mix output feed speakers and recorders.
- Mic inputs: 2 combo with +48 V phantom power; headset mic input on channel 1
- Headphone outputs: 2 independent monitor channels
- Channels: 8 total; 3 stereo inputs with assignable faders; TRRS smartphone channel
- USB audio: 8-in/14-out, 24-bit, up to 48 kHz, with direct outs per channel
- DSP: voice changer, amp simulator, comp, EQ, reverb, delay, ducker, maximizer
- Sound pads: 6; mix-minus on channels 1 and 2
- Dimensions 290 x 88 x 222 mm; weight 2.2 kg
The AG08 fits two-person podcasts that are also live streams, where app audio, game sound or music beds mix with the voices and a producer monitors separately. It does not record to a card on its own, so a computer is part of every session.
Buying guide
Count heads before features. The right unit is the one whose mic inputs and headphone outputs both cover your largest regular panel, with a call-in route for the guests who cannot be in the room. Everything else, pads, processing and screens, ranks below that headcount.
Matching mixers for multi person podcast headcounts
For five or six people at microphones, only the PodTrak P8 and LiveTrak L-8 qualify here, and both give every participant a headphone output. Four-person shows have the widest choice: the Mixcast 4 and Rodecaster Pro II are built for exactly that table. Two-person shows can choose freely, including the compact Mackie and Yamaha units.
Headphone outputs and monitor mixes
Every participant needs to hear themselves, so headphone outputs should match mic inputs one for one. Independent volume per output, as on the Mixcast 4, saves arguments; separate monitor mixes, as on the LiveTrak L-8, let a producer hear a different balance. Two-output units suit a host plus one guest or a host plus producer.
Multitrack recording for group editing
A separate track per voice is what makes a group recording fixable: one person’s cough, laugh or passage can be cut or lowered without touching the others. The Mixcast 4 records 14 tracks, the PodTrak P8 13 and the LiveTrak L-8 12, all to SD cards without a computer. The AG08 sends direct outs over USB, which ties recording to a DAW session.
Level help for uneven voices
Groups mix loud and quiet speakers, and per-channel compressors on the PodTrak P8, Mixcast 4 and Rodecaster Pro II tame the differences. Auto-mix on the Mixcast 4 and AutoMix on the DLZ Creator XS go further, balancing levels and setting mic priority automatically, which matters most when nobody is free to watch meters during the conversation.
Remote guests and call-ins
Every unit here provides a route with mix-minus so the caller does not hear their own echo: phone channels on the PodTrak P8 and LiveTrak L-8, Bluetooth and TRRS on the Mixcast 4, Bluetooth on the DLZ Creator XS and Rodecaster Pro II, and a TRRS smartphone channel on the AG08. Check which route your guests can use before the recording day.
FAQ
Group recording raises the same questions about headcounts, headphone feeds and editing files. The answers below use only the figures and features stated on each maker’s product page, so the counts can be checked against the comparison table above before you commit to a unit.
How many people can record at once on each unit?
At microphones: six on the PodTrak P8 and LiveTrak L-8, four on the Mixcast 4 and Rodecaster Pro II, and two on the DLZ Creator XS and AG08. The two-mic units still add remote guests by phone or USB, and the Rodecaster Pro II can add two wireless transmitters, but the in-room headcount is set by the mic inputs.
What matters most in mixers for multi person podcast panels?
Matching counts: a headphone output for every mic input, so nobody records deaf. After that, multitrack files for editing and per-channel compression for uneven voices. Sound pads and effects are production extras; a panel that cannot hear itself or cannot be separated in editing has a problem no pad can fix.
Can a remote guest join any of these setups?
Yes. All six provide a call-in route with mix-minus: the PodTrak P8 has a phone channel and a USB guest channel, the LiveTrak L-8 uses its TRRS phone connection or USB, the Mixcast 4 takes Bluetooth, USB or TRRS callers, the DLZ Creator XS and Rodecaster Pro II use Bluetooth, and the AG08 uses its TRRS smartphone channel.
Do these units record without a computer?
Four of them do: the PodTrak P8, LiveTrak L-8 and Mixcast 4 record multitrack files to SD cards, and the DLZ Creator XS records multitrack audio to a MicroSD card or USB flash drive. The Rodecaster Pro II records to microSD, USB storage or a computer. The AG08 is the exception: it sends multitrack audio over USB and needs a computer to record.
Which units help balance loud and quiet speakers automatically?
The Mixcast 4 has an auto-mixing function that adjusts levels and sets mic priority across its four mic inputs. The DLZ Creator XS has AutoMix, which manages levels for up to four mics. The other units rely on per-channel compressors and manual fader work, which is workable but needs an attentive operator.
Conclusion
Seat the panel first: the PodTrak P8 or LiveTrak L-8 for six voices, the Mixcast 4 or Rodecaster Pro II for four, and the DLZ Creator XS or AG08 for pairs who add guests remotely. Match headphone outputs to mic inputs, insist on multitrack files, and the group recording largely takes care of itself every time.