Key takeaways
- Compare six digital mixers for live shows on input counts, mic preamps, motorized faders, effects, recording and networking, plus a full buying guide and FAQ.
A live show allows no second take, so the console has to cover every mic and instrument, feed the monitors and record the night without fuss. This guide compares audio mixers digital for live work on inputs, preamps, faders, effects and networking, so you can match a desk to the size and pace of your stage.
Quick verdict
Six consoles anchor this list, and each one suits a different kind of live work. The Behringer X32 and Midas M32 LIVE cover full bands with 40 input channels, the Allen and Heath SQ-5 runs 48 channels at 96 kHz, and the QSC TouchMix-30 Pro packs 32 channels into the smallest box here by a wide margin.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Behringer X32 | Digital console, 40 input | Clubs, churches and touring bands | 32 MIDAS-designed preamps, 25 motorized faders | Large, heavy surface at 45.4 lb |
| Midas M32 LIVE | Digital console, 40 input | Engineers who put preamp sound first | 32 Midas PRO preamps, 192 kHz converters | Heaviest desk here at 53.9 lb |
| Allen and Heath SQ-5 | Digital console, 48 channel | Monitor-heavy shows and in-ear rigs | 96 kHz FPGA engine, 12 stereo mixes | Only 16 local mic inputs on the surface |
| PreSonus StudioLive 32S | Digital console, 32 channel | Recording the show as you mix it | 40 mixing channels, 286 processors | Runs at 48 kHz while rivals run higher |
| Yamaha TF5 | Digital console, 32 channel | Fast setup with touchscreen workflow | 33 motor faders, 48 input mixing channels | Digital networking needs an added card |
| QSC TouchMix-30 Pro | Compact digital mixer, 32 channel | Small crews and tight stage corners | 32 channels in a 17.5 lb carry-on size box | No full motorized fader bank |
Read the list by workload rather than by brand. A four-piece band with a few monitor mixes sits well inside any desk here, while a festival changeover with 30-plus inputs, eight monitor feeds and a multitrack recording points to the bigger surfaces. The buying guide near the end turns those trade-offs into a short set of checks you can run against your own stage plot.
How we selected
Every console in this guide comes from a product page opened for this article, and every number in the text below is copied from one of those pages. The pages list current models that are on sale now, and the selection favors desks a working engineer can buy today rather than older designs that linger in catalogs.
The six picks split into three shapes. The X32, M32 LIVE and StudioLive 32S are full consoles with long fader banks for larger input counts. The SQ-5 and TF5 sit in the middle, with compact surfaces that expand through stage boxes. The TouchMix-30 Pro drops the fader bank almost entirely and runs from a touchscreen, which suits a performer or a small crew mixing from the stage. Specs that decided the order here were input count, mic preamp count, monitor mix capacity, effects, recording options and how each desk connects to stage boxes.
Two limits apply to the whole list. First, channel counts are processing counts as the makers state them, and local input sockets are always fewer than the headline number, so the product notes separate the two. Second, no claim of personal use appears anywhere in this guide: handling, sound and build comments rest on the published figures and the makers’ own descriptions, not on time spent at the desks.
Audio mixers digital for live in detail
The six product notes below follow the same pattern: who the desk suits, the figures that matter for live work, and the limits worth knowing before you commit. Input counts, preamp counts, fader counts, recording formats and weights all come straight from the opened product pages listed for this guide.
Behringer X32
The X32 is the long-running workhorse of this group: a 40-input, 25-bus digital console with 32 MIDAS-designed programmable mic preamps and 25 motorized 100 mm faders. It fits clubs, churches and touring bands that need a full surface, deep effects and scene recall at a scale smaller desks cannot reach.
For live work the headline figures are the 40 input channels, 16 XLR outputs plus 6 line inputs and outputs, and a 32 x 32 channel USB 2.0 audio interface for multitrack recording. The virtual FX rack holds 8 true-stereo FX slots with simulations of the Lexicon 480L and PCM70, the EMT250 and the Quantec QRS. Processing runs on a 40-bit floating-point DSP with overall latency listed at 0.8 msec, and the main LCR, 6 matrix buses and 16 mix buses each carry inserts, 6-band parametric EQ and full dynamics, backed by 8 DCA and 6 mute groups.
Stage wiring is a strength. Dual AES50 ports make the console 48-channel digital snake ready, and ULTRANET connectivity feeds Behringer P-16 personal monitoring. The 7 inch day-viewable color TFT and LCD scribble strips keep channel identity clear outdoors, and up to 100 scenes can be stored. The trade-offs are size and weight: the console measures 35.4 x 20.8 x 7.9 inches and weighs 45.4 lb, and it draws 120 W, so it wants a proper case and a two-person lift policy on stairs.
- Pros: 40 inputs and 32 preamps cover big stage plots; 25 motorized faders; deep FX rack; AES50 stage box support.
- Cons: heavy at 45.4 lb; the design is the oldest in this group; menus reward setup time before the show.
Buy if: you run a venue, church or band with 24 or more inputs and want one desk that mixes, records and recalls the whole show. Skip if: you mix from the stage in tight corners, where the TouchMix-30 Pro or SQ-5 footprint makes more sense.
Midas M32 LIVE
The M32 LIVE is the pick for engineers who start with preamp sound. It runs up to 40 simultaneous input channels through 32 Midas PRO microphone preamplifiers, the same preamp design the maker lists for its XL4 and Heritage 3000 consoles, and it pairs them with 25 motorized faders rated for 1 million life cycles.
The spec sheet leans into conversion and recording. The maker lists 192 kHz ADC and DAC converters with 40-bit floating point digital signal processing, a 32 x 32 channel USB 2.0 audio interface, and dual SD and SDHC slots that record 32 bidirectional channels of uncompressed WAV, up to 3 hours of 32-channel PCM in one session. Eight digital signal processing effects engines and 8 DCA groups with 6 mute groups cover the live processing side, and AES50 networking allows up to 96 inputs and 96 outputs when stage boxes join the system.
On the downside, this is the heaviest console here at 53.9 lb, measuring 35.1 x 23.9 x 10.1 inches, so it is a deliberate choice for a fixed front of house position or a cased touring rig rather than a grab-and-go desk. Its 7 inch full color TFT is daylight viewable, which helps at outdoor shows, and the 25 time-aligned and phase-coherent mix buses keep monitor feeds consistent when several engineers share the system.
- Pros: Midas PRO preamps; 192 kHz converters; SD card multitrack recording without a computer; 25 motor faders.
- Cons: heaviest desk in the group; full feature set takes time to learn; expansion cards add to the setup.
Buy if: sound quality at the preamp stage is your first priority and the desk lives in one venue or a proper flight case. Skip if: one person carries the whole rig, where the SQ-5 or TouchMix-30 Pro cuts the load sharply.
Allen and Heath SQ-5
The SQ-5 is the monitor engineer’s desk in this group. It processes 48 input channels and 36 buses through a 96 kHz XCVI FPGA engine with latency under 0.7 ms, and it offers 12 stereo mixes plus LR and 3 stereo matrix mixes, which maps neatly onto in-ear monitoring for a full band.
The surface carries 16 onboard preamps and 17 motorized faders (16 plus 1) across 6 layers, with a 7 inch capacitive touchscreen at the center. An SLink port expands the system up to 48 mic inputs through stage boxes, and a 64-channel I/O port accepts audio networking cards. Recording is covered two ways: a built-in 32×32 USB audio interface for a computer, and SQ-Drive direct recording to a USB drive for multitrack or stereo captures without a laptop at the desk.
Effects depth is strong for the size: 8 stereo FX engines with dedicated returns and access to the RackExtra FX library, 4-band parametric EQ on each channel, and automatic mic mixing for speech work. The honest limit is local inputs: only 16 mic sockets sit on the surface, so a 24-input band needs a stage box in the plan from day one. The opened page does not state dimensions or weight, so those figures are left out here rather than guessed.
- Pros: 48 channels at 96 kHz; 12 stereo mixes for in-ear rigs; under 0.7 ms latency; records to USB drive or computer.
- Cons: 16 local mic inputs only; stage box is an extra purchase for bigger shows; touchscreen workflow splits opinion.
Buy if: your show runs many stereo monitor mixes and you want 96 kHz processing in a compact surface. Skip if: you need 24 or more mic inputs plugged straight into the desk with no stage box, where the X32 or TF5 fits better.
PreSonus StudioLive 32S
The StudioLive 32S suits the engineer who records every show as a matter of routine. It is a 32-channel console with 40 mixing channels and 26 mix buses, run by a dual-core FLEX DSP engine that the maker rates at 286 simultaneous processors, including Fat Channel plug-in models on every input channel and mix bus.
Mix flexibility comes from 16 FlexMixes that can serve as aux mixes, subgroups or matrix mixes, plus 4 FLEX FX buses with stereo reverberation systems. Networking runs over AVB, so the desk builds a system with PreSonus NSB stage boxes and EarMix 16M personal monitor mixers. Digital figures on the page include 24-bit conversion at 48 kHz and 44.1 kHz sampling rates, total system latency of 1.9 ms for local routing, and phantom power at 48 VDC switchable per channel. A Bluetooth 4.1 stereo input handles walk-in music from a phone.
The 32S is also the lightest full console here at 37.2 lb, measuring 32.37 x 22.97 x 6.51 inches, and it draws 85 W. Its limits are real but narrow: it works at 48 kHz while the SQ-5 runs at 96 kHz and the M32 LIVE lists 192 kHz converters, and its recording and control path leans on the maker’s own software family, so engineers outside that ecosystem face a learning curve at first.
- Pros: 286 simultaneous processors; Fat Channel processing on every channel and bus; AVB stage box and personal mixer support; lightest full console here.
- Cons: 48 kHz ceiling; best results come inside the maker’s software ecosystem; fewer local outputs than some rivals.
Buy if: multitrack capture and per-channel plug-in processing matter as much as the mix itself. Skip if: you want the highest sample rates on paper, or your monitor world already runs on another networking standard.
Yamaha TF5
The TF5 is built for speed of setup. Its TouchFlow Operation touchscreen pairs with 33 motorized faders (32 channels plus 1 master), so a house engineer can walk up, touch a channel and mix with familiar gestures, while guest engineers still get a full fader bank under their hands.
Capacity is generous: 48 input mixing channels (40 mono plus 2 stereo plus 2 return), 32 analog XLR and TRS combo mic and line inputs with 48V phantom power and recallable D-PRE preamps, and 16 analog XLR outputs. Buses run to 20 aux (8 mono and 6 stereo) plus stereo and sub, with 8 DCA groups. Eight FX processors cover reverb, delay and modulation, and recording runs 34 x 34 channels over USB 2.0 to a computer, with 2 x 2 recording to a USB storage device for a quick board mix.
The TF5 measures 34.1 x 8.9 x 23.6 inches and weighs 44.1 lb, and it is rack-mountable with an optional kit. Dante networking is not built in: the desk has 1 expansion slot for the optional NY64-D Dante card, which also connects Yamaha Tio stage boxes. Engineers who never network will not miss it; engineers planning a digital snake should count the card as part of the purchase.
- Pros: 32 local combo inputs, the most on-surface sockets here; 33 motor faders; touchscreen workflow suits mixed-skill crews; 34 x 34 USB recording.
- Cons: Dante needs an optional card; 44.1 lb still wants a case and care on stairs; fewer stereo mixes than the SQ-5.
Buy if: several people of different skill levels run the same room and setup speed matters every night. Skip if: your rig depends on Dante stage boxes from day one and you do not want the add-on card in the budget line.
QSC TouchMix-30 Pro
The TouchMix-30 Pro answers a different question: how much desk can one person carry? QSC fits 32 mixing channels (24 mic and line, 6 line and stereo USB) and 16 outputs into a box measuring 7.5 x 16.9 x 18.1 inches and weighing 17.5 lb, small enough that the maker describes it as carry-on size.
Control centers on a 10 inch multi-touch screen, with Wi-Fi control from phones and tablets through the TouchMix Control app. The 24 class-A microphone preamps split into 20 XLR and 4 XLR and TRS combo sockets. Processing per input channel includes 4-band parametric EQ, gate, compressor and delay, while outputs carry a 1/3 octave graphic EQ, 6-band parametric EQ, limiters, delay and 12-band anti-feedback filters. Six stereo effects processors plus a pitch correct unit cover the show effects, and anti-feedback and room tuning wizards aim at fast room setup.
Recording is unusually complete for the size: 32-channel direct-to-hard-drive record and playback, plus a 32 x 32 USB DAW interface for Mac and Windows computers. Preset memory holds 99 user scenes, 120 factory presets and 99 user presets. The limit is tactile: there is no full motorized fader bank, so engineers who mix by feel on long faders will adjust more slowly, and Wi-Fi control needs an external router or USB adaptor that is not included.
- Pros: full 32-channel spec at 17.5 lb; records 32 channels to a hard drive with no computer; strong output processing and wizards.
- Cons: touchscreen-first control; Wi-Fi hardware not included; only 24 mic preamps against 32 on the big consoles.
Buy if: you mix your own band from the stage, run corporate shows from a small table, or fly with your rig. Skip if: a dedicated engineer mixes busy shows by hand and expects a long motorized fader bank.
Buying guide
A digital live desk is a system purchase, not a single box. The checks below move from the stage plot outward: inputs first, then monitors, then recording and networking, and finally the physical realities of weight, power and the room the desk will live in each night.
Count inputs on audio mixers digital for live
Start with your fullest stage plot, not your average one. Count every mic, DI box, playback channel and spare line, then compare that number twice: once against the desk’s processing channels and once against its local mic sockets, because the two figures differ on every console in this guide.
The X32 and M32 LIVE process 40 input channels with 32 local preamps each, the SQ-5 processes 48 channels but starts with 16 local preamps, and the TF5 lands between them with 48 mixing channels and 32 local combo inputs. If your count passes the local sockets, a stage box stops being an accessory and becomes part of the system, so plan the network cable run and the extra box at the same time as the desk.
Plan monitor mixes before the main mix
Monitor capacity ends more desk purchases than input count does. Wedges need one mix each, stereo in-ear feeds need two channels of one stereo mix, and a stereo mix desk like the SQ-5, with 12 stereo mixes, serves an in-ear band very differently from a desk built around mono aux sends.
Check how the desk handles personal monitoring as well. The X32 feeds Behringer P-16 units over ULTRANET, the StudioLive 32S works with EarMix 16M mixers over AVB, and the SQ-5 links to the maker’s ME personal mixers. Letting musicians run their own monitor levels also frees the engineer to stay on the main mix during the show.
Decide how the show gets recorded
Recording splits into three patterns in this group. USB interfaces send multitrack audio to a computer: 32 x 32 on the X32, M32 LIVE and TouchMix-30 Pro, and 34 x 34 on the TF5. Direct-to-media recording skips the computer, as on the M32 LIVE’s dual SD slots and the TouchMix-30 Pro’s hard drive recording.
The SQ-5 covers both patterns with its 32×32 USB interface and SQ-Drive recording to a USB drive. Pick based on crew, not specs: a one-person operation benefits from pressing record on the desk itself, while a dedicated engineer with a laptop can run the computer route and keep a backup stereo capture at the same time.
Match networking to your stage boxes
Each maker networks differently, and stage boxes only speak their own family language. Behringer and Midas desks use AES50, the SQ-5 uses SLink with an I/O port for cards such as Dante or Waves, the StudioLive 32S uses AVB, and the TF5 takes Dante through an optional card.
If your venue already owns stage boxes or a personal monitoring system, that ownership quietly chooses the desk family for you. If you are starting from zero, price the desk and its first stage box together, and confirm the cable type and maximum run the maker lists before you commit the system to a long venue run.
Weigh the desk, the case and the crew
The physical spread in this group is wide: 17.5 lb for the TouchMix-30 Pro, 37.2 lb for the StudioLive 32S, 44.1 lb for the TF5, 45.4 lb for the X32 and 53.9 lb for the M32 LIVE, before any case adds its share. A desk that one person can carry up venue stairs gets used differently from one that anchors a front of house position.
Power draw matters on shared circuits too, with listed figures from 75 W on the SQ-5 to 120 W on the X32. None of these desks strains a normal venue circuit alone, but a rack of amplifiers on the same feed changes the picture, so check the maker’s power figure against the room rather than assuming.
FAQ
Five questions come up in almost every digital desk purchase: channel counts, recording, monitor mixes, networking and whether a compact desk can really run a full show. Each answer below sticks to the figures published for the six consoles in this guide.
How many channels do audio mixers digital for live work need?
Count the largest show you run, then add spare channels for guests and failures. A typical four-piece band with full drums lands between 16 and 24 inputs, which every desk here covers, while festival-style plots pass 32 and point to the 40-channel X32 and M32 LIVE or the 48-channel SQ-5.
Remember that processing channels and local sockets are different numbers. The SQ-5 processes 48 channels from 16 local preamps, so its extra capacity arrives through stage boxes. The TF5 is the reverse case: 48 mixing channels with 32 local inputs, the most sockets on the surface in this group.
Can these desks record a live show without a computer?
Three of the six can. The M32 LIVE records 32 channels to dual SD and SDHC cards, the TouchMix-30 Pro records 32 channels direct to a hard drive, and the SQ-5 records multitrack or stereo to a USB drive through SQ-Drive, each without a laptop at the mixing position.
The X32, StudioLive 32S and TF5 record multitrack through their USB interfaces to a computer instead, at 32 x 32, 64 x 64 class and 34 x 34 channel counts as their makers list them. A computer route also gives you a virtual soundcheck path, playing the recording back through the same channels the next day.
Which desk here suits in-ear monitors best?
On published figures, the SQ-5 leads for in-ear work: 12 stereo mixes plus LR, 3 stereo matrix mixes and latency under 0.7 ms, which is the combination stereo in-ear systems ask for. Its maker also positions it directly for in-ear monitoring setups in the product description.
The TouchMix-30 Pro is the smaller alternative, with 14 aux outputs that can pair for stereo and two aux pairs able to drive wired in-ear monitors directly. The X32 and StudioLive 32S answer the same need through personal monitor mixers, the P-16 and EarMix 16M, which move level control to each musician.
Do I need a stage box with a digital mixer?
Only when your input count passes the local sockets or the desk sits far from the stage. A stage box puts the preamps at the backline and sends audio to the desk over one network cable, which replaces a heavy analog snake and shortens setup on larger stages.
Every family here has its own boxes: AES50 boxes for the X32 and M32 LIVE, SLink expanders for the SQ-5, AVB NSB boxes for the StudioLive 32S, and Tio racks for the TF5 once its Dante card is fitted. Boxes from one family do not work with another, so the desk choice fixes the stage box choice.
Is a touchscreen mixer enough for a full band show?
On channel count and processing, yes: the TouchMix-30 Pro runs 32 channels with full per-channel EQ, gates and compressors, output processing on every feed, six effects processors and 32-channel recording. Nothing in its published spec limits it to small shows on paper.
The real limit is workflow speed. A busy engineer riding several faders at once works faster on the motorized banks of the X32, TF5 or SQ-5. Touchscreen desks suit a set-and-recall show, a mixing musician, or a small crew far better than a fast-changeover festival stage.
Conclusion
Match the desk to the show you actually run: the X32 and M32 LIVE for 40-channel work, the SQ-5 for stereo monitor worlds, the StudioLive 32S for recording-led rigs, the TF5 for fast mixed-skill setups, and the TouchMix-30 Pro when one person carries the whole system to the gig and mixes from the stage.