Updated Nov 16, 2026· 14 min read

Key takeaways

  • Compare digital mixers for live sound on channel counts, mic preamps, motorized faders, built-in effects, multitrack recording and weight, plus a buying guide.

A live mix falls apart when the console runs out of inputs, monitor mixes or hands at the wrong moment. This guide compares six digital mixers for live sound, from full consoles with motorized faders to a rack stagebox run from a tablet, using the channel counts, preamps, buses and recording paths each maker publishes.

Quick verdict

The short answer is that the right pick depends on how many inputs your act really uses and how you prefer to work: hands on motorized faders, fingers on a touchscreen, or a stagebox with no control surface at all. Every mixer below handles at least 32 input channels and records multitrack audio.

The Behringer X32 and Yamaha TF5 are the full-size consoles, each with 32 mic inputs and more than 30 motorized faders. The PreSonus StudioLive 32S adds the largest USB interface here and an SD recorder. The Allen & Heath SQ-5 is the only 96 kHz console in the group. The Mackie DL32S drops the surface entirely and puts 32 preamps in a 4 kg rack box, while the QSC TouchMix-30 Pro puts everything behind a 10 inch touchscreen.

Product Type Best for Key spec Main limit
Behringer X32 Full console Large bands and busy venues 32 MIDAS-designed preamps, 25 motorized faders 20.6 kg console, the heaviest surface here
PreSonus StudioLive 32S Full console Bands that record every show 128-channel USB interface, SD multitrack recorder Sample rates stop at 48 kHz, no 96 kHz mode
Allen & Heath SQ-5 Compact console Engineers who want 96 kHz processing 48 channels at 96 kHz, under 0.7 ms latency 16 local mic inputs, expansion needs stage boxes
Yamaha TF5 Full console Crews that want a guided, simple layout 32 combo inputs, 33 motor faders Sample rate fixed at 48 kHz
Mackie DL32S Rack stagebox Small venues, fly dates, tight stages 32 preamps in a 4 kg rack unit No faders or screen on the unit itself
QSC TouchMix-30 Pro Touchscreen console Speech, corporate work, compact rigs 32 channels, 10 inch multi-touch screen No physical faders, Wi-Fi control needs a router

How we selected

We built this list from published specifications only: input and channel counts, mic preamp counts, bus structures, effects, recording paths, control style and physical size. Every model is a current product sold as a live sound console, and every figure quoted in this article comes from a maker or listing page for that exact model.

The six mixers split into three working styles. The X32, StudioLive 32S and TF5 give one fader per channel for engineers who mix with both hands. The SQ-5 packs 48 channels into a smaller surface with layers. The DL32S and TouchMix-30 Pro trade physical faders for app or touchscreen control, which suits small stages and one-person crews. Comparing across those styles matters more than comparing raw channel counts, so each review below states who the format suits and where it runs out of room.

Digital mixers for live sound in detail

The six reviews below follow the same order of questions a working engineer asks at load-in: how many inputs land on stage, how many mixes the band can have, how the show gets recorded, and how much the console weighs when the van is packed at the end of the night.

Behringer X32

The X32 is the big-format option here: a 40-input, 25-bus digital console with 32 MIDAS-designed programmable mic preamps and 25 motorized 100 mm faders. It suits bands, rental racks and venues that need a full channel count on a physical surface with total recall of every setting between shows.

The maker lists 32 input channels, 8 aux channels and 8 FX return channels of processing, with 16 mix buses, 6 matrix buses and a main LRC bus. Two AES50 ports make the console 48-channel digital snake ready, and an expansion card slot adds 32-channel audio I/O in several standards. Processing runs at 40-bit floating point with 24-bit conversion at 44.1 or 48 kHz and a stated 114 dB dynamic range, and I/O latency is listed at 0.8 ms. Phantom power is 48V and switchable per input, scenes store 100 total recall snapshots, and the virtual FX rack holds 8 true-stereo engines. Six mute groups and 8 DCA groups help manage large channel counts.

The limits are size and age of the format. At 900 x 528 x 200 mm and 20.6 kg it is the largest and heaviest surface in this group, and it works at 44.1/48 kHz only, with no 96 kHz mode.

  • Pros: 32 programmable preamps, dual AES50 ports, 100 scenes, full-size fader surface
  • Cons: 20.6 kg and a large footprint, 48 kHz ceiling, deep menu system for new users

Buy if you mix larger acts and want one fader per input with room to grow over a digital snake. Skip if your gigs are small rooms where a 32-preamp console never gets half its inputs used.

PreSonus StudioLive 32S

The StudioLive 32S is a 40-channel digital mixer built around recording as much as mixing. It carries 32 XMAX-R fully recallable mic preamps, 33 touch-sensitive motorized faders and a 128-channel USB audio interface, which makes it the natural pick for bands that record every performance.

Routing is the strong point. The maker lists 24 mix buses: 16 FlexMixes that can each be set as an aux, a subgroup or a matrix mix, plus 4 effects buses and 4 subgroups, with 24 DCAs for group control. The dual-core FLEX DSP powers 286 processors, and Fat Channel processing puts modeled EQ and compression on every input and output. An onboard SD recorder captures multitrack audio with Virtual Soundcheck, and the page states all 40 channels plus a stereo mix can be recorded via USB, SD card, or both at once. AVB networking runs 64×64 for stage boxes and personal mixers, and Capture software plus a Fender Studio Pro license are included.

Conversion is 24-bit with a stated 115 dB dynamic range and 1.9 ms total system latency. The console measures 32.37 x 6.51 x 22.97 inches and weighs 37.2 lb, and it draws 85 W. Sample rates are 44.1 and 48 kHz only.

  • Pros: 128-channel USB interface, SD recording, flexible FlexMix buses, recallable preamps
  • Cons: No 96 kHz option, AVB expansion ties you to the PreSonus network family

Buy if live recording is part of the job and you want the console, interface and recorder in one box. Skip if you already own a Dante stage box system you plan to keep using.

Allen & Heath SQ-5

The SQ-5 is the compact console for engineers who care about processing resolution. Its XCVI FPGA engine runs 48 input channels at 96 kHz with latency the maker lists at under 0.7 ms, and the surface packs 17 motorized faders and a 7 inch capacitive touchscreen into a rack-mountable body.

Onboard I/O is deliberately lean: 16 XLR mic/line inputs with recallable preamps and +48V phantom power, plus stereo line inputs. The SLink port expands the system up to 48 mic inputs with stage boxes, and a 64-channel I/O port accepts audio networking cards. Mix structure is 12 stereo mixes plus LR and 3 stereo matrix mixes, 36 buses in total. Eight stereo FX engines draw on the RackExtra FX library, DEEP processing plug-ins can be embedded in channels, and every channel carries a 4-band parametric EQ. Recording runs two ways: a 32×32 USB audio interface, and SQ-Drive direct recording to a USB drive, listed at 16 tracks at 96 kHz.

The trade-off is that the local preamp count is half that of the X32 or TF5, so bigger shows depend on expansion boxes. The opened listing page does not state dimensions or weight, so crews comparing case sizes should pull those figures from the maker page.

  • Pros: 96 kHz processing with very low latency, 48 channels, strong FX library, compact surface
  • Cons: 16 local mic inputs, stage box expansion is an extra purchase, layered fader layout

Buy if you mix in-ear monitors or detailed shows and want 96 kHz headroom in a small footprint. Skip if you need 32 local mic inputs on the console itself without extra boxes.

Yamaha TF5

The TF5 is the largest TF series console: 32 analog XLR/TRS combo mic/line inputs, each with a recallable D-PRE preamp and 48V phantom power, and 33 motorized 100 mm faders. Its TouchFlow touchscreen layout is aimed at crews who want a digital console that behaves in a direct, guided way.

The mixer handles 48 input mixing channels (40 mono, 2 stereo and 2 return) and offers 20 aux buses (8 mono and 6 stereo) plus stereo and sub buses, with 8 DCA groups. Sixteen analog XLR outputs feed the PA and monitors. Each input channel carries EQ and two dynamics processors, and 8 FX processors cover reverb, delay and modulation. Recording is 34 x 34 channels over USB 2.0 to a computer, or 2 x 2 to a USB storage device, and the console ships with a Nuendo Live download for multitrack recording and virtual soundcheck work.

It is a big console physically: 866 x 225 x 599 mm and 20 kg. The sample rate is fixed at 48 kHz, and Dante networking needs the optional expansion card and I/O rack rather than being built in.

  • Pros: 32 combo inputs on the surface, simple touchscreen workflow, 34 x 34 USB recording
  • Cons: 20 kg and a wide footprint, 48 kHz only, network audio is an add-on

Buy if a volunteer or rotating crew needs a full-size console that stays approachable. Skip if your rig already runs on a digital snake and you want networking built into the base unit.

Mackie DL32S

The DL32S takes the opposite approach to a console: it is a 32-channel wireless digital mixer in a stagebox with built-in Wi-Fi and no control surface at all. All mixing happens in the Master Fader app on a tablet, phone, Mac or PC, and up to 20 devices can control it at the same time.

Inside the box are 32 recallable Onyx+ mic preamps and 10 freely assignable XLR outputs plus a headphone output. Every input channel carries a 4-band parametric EQ, high-pass filter, gate, compressor and an RTA/spectrograph view. The 15 output buses add 4-band parametric EQ, high and low-pass filters, a 31-band graphic EQ, compressor/limiter and alignment delay. Four stereo FX processors provide reverbs, delays, chorus and flanger with dedicated sends and returns, and there are 6 VCAs and 6 mute groups. A 32×32 USB interface records multitrack audio at 24-bit. The unit measures 185 x 447 x 147 mm, weighs 4 kg and ships with a rack bracket.

The limit is the missing surface: if the tablet battery dies or the Wi-Fi drops, there are no faders to grab, and engineers who mix by feel may not enjoy glass-only control.

  • Pros: 32 preamps in a 4 kg rack box, full processing per channel, multi-device app control
  • Cons: No physical controls at all, depends on Wi-Fi and a charged tablet, 10 outputs only

Buy if stage space is tight, the mixer lives on stage with the band, or one engineer mixes from the room. Skip if you want hardware faders under your hands for the whole show.

QSC TouchMix-30 Pro

The TouchMix-30 Pro is a touchscreen console with no physical faders: a 10 inch multi-touch display runs 32 mixing channels built from 24 mic/line inputs, 6 line inputs and a stereo USB input. It fits speech, corporate events, worship and compact band rigs where setup speed matters more than fader count.

The 24 class-A mic preamps feed channels with 4-band parametric EQ, variable high and low-pass filters, a gate, compressor and delay. Sixteen outputs (2 main XLR, 14 aux XLR, plus stereo aux, monitor and cue feeds) each carry a 1/3 octave graphic EQ, 6-band parametric EQ, limiter, delay and 12-band notch filters for feedback control. Six stereo effects engines plus a pitch correct processor are built in, along with 8 DCA groups, 8 mute groups and 8 subgroups. Recording is 32 tracks direct to a hard drive, and a 32×32 USB interface connects to a computer. Auto feedback and room tuning wizards, two real-time analyzers and a touch-and-route patch matrix round out the live tools.

At 7.5 x 16.9 x 18.1 inches and 17.5 lb it is easy to carry, and it draws 85 W. The compromises: Wi-Fi control needs an external router or a USB Wi-Fi adaptor that the maker lists as not included, and engineers used to faders must adapt to touch strips.

  • Pros: Fast touchscreen workflow, strong output processing, direct hard drive recording, light at 17.5 lb
  • Cons: No physical faders, Wi-Fi hardware not included, 24 mic preamps rather than 32

Buy if one person runs sound for speech and music and wants wizards and presets to speed up setup. Skip if you mix fast-moving shows where grabbing two faders at once is part of the job.

Buying guide

Specs only help if they map to your show. Work through the five checks below with your actual input list and monitor needs in hand, and the differences between these six consoles will narrow to one or two realistic choices for your crew, your stage and your transport.

Count inputs at the stage, not on the badge

A console badge counts processing channels, but the band plugs into physical inputs. The X32 and TF5 land 32 mic inputs on the surface, the DL32S lands 32 in a rack box, the TouchMix-30 Pro lands 24, and the SQ-5 lands 16 locally with expansion for the rest of its 48 channels.

Write the input list for your biggest regular show: drums alone can take 8 to 12 microphones, and stereo keyboards, playback and talkback eat channels quietly. If the total sits near a console limit, choose the format that expands with a stage box rather than the one that is already full on day one.

What matters most in digital mixers for live sound

Three things decide most live purchases: enough monitor mixes for the band, processing on every channel so no one shares a single EQ, and a control style the engineer can run under pressure. Bus counts and effects lists matter, but they come after those basics are covered.

For monitors, count mixes, not aux labels. The StudioLive 32S offers 16 FlexMixes that can be auxes, subgroups or matrix mixes. The SQ-5 offers 12 stereo mixes, which suits in-ear systems. The TF5 offers 20 aux buses in mono and stereo form. Stereo mixes halve the count of separate wedge mixes, so match the structure to how your band actually listens.

Faders, screens and remote control

Control style changes how a show feels. Motorized faders on the X32, StudioLive 32S, SQ-5 and TF5 recall scenes instantly and let two hands ride levels. The DL32S and TouchMix-30 Pro replace faders with glass, which saves space and weight but changes the way quick moves happen.

Remote control is the other half of the decision. App control lets an engineer ring out monitors from the stage and adjust the house mix from a seat. The DL32S builds Wi-Fi in and supports up to 20 control devices. The TouchMix-30 Pro controls every function from its app but needs an external router or adaptor for Wi-Fi. The consoles with surfaces also offer remote apps, so treat remote control as a bonus on those, not the main act.

Recording the show

Every mixer here records multitrack audio, but the path differs. The StudioLive 32S records to SD card and over a 128-channel USB interface. The X32 records over its 32-channel interface and to USB flash. The TF5 records 34 x 34 over USB. The DL32S records 32×32 over USB.

Decide whether recording is a core job or a bonus. If the band sells live recordings or posts full shows, an onboard recorder that works without a laptop, like the SD recorder in the StudioLive 32S or the hard drive recording in the TouchMix-30 Pro, removes a failure point. If recording is occasional, any of the USB interfaces here will do the job with a laptop at the side of the stage.

Size, weight and the load-out

The physical spread in this group is wide: the DL32S weighs 4 kg and racks on stage, the TouchMix-30 Pro weighs 17.5 lb, the StudioLive 32S weighs 37.2 lb, and the X32 and TF5 sit at about 20 kg each before a flight case adds its share to the total lift at the van.

Measure your case and your stage, not just the console. A full-size surface needs a stand or table with real depth, and a rack stagebox needs clean power and a tidy cable run at the drum riser. The lightest option is not always the easiest if it adds a tablet stand, a router and extra cables to the same footprint.

FAQ

These are the questions that come up most when a band or venue moves from an analog desk to a digital console, covering channel counts, monitor duty, recording and sample rates. The answers stick to what the makers of the six mixers above publish in their specifications.

How many channels do digital mixers for live sound need for a band?

Most five-piece bands land between 16 and 24 inputs once drums, backline, vocals and playback are counted. A 32-input console like the X32, TF5 or DL32S leaves spare channels for guests and extra keys, while a 16-input surface like the SQ-5 needs its expansion path for the same show.

Count processing channels separately from inputs. The StudioLive 32S mixes 40 channels but lands 32 preamps locally, and the SQ-5 mixes 48 channels with 16 local preamps. Spare processing channels help with playback and talkback, but they do not add microphone sockets.

Can one console run front of house and monitors together?

Yes, if it has enough independent mixes. The StudioLive 32S can configure its 16 FlexMixes as auxes for monitors, the SQ-5 offers 12 stereo mixes suited to in-ear systems, and the TF5 offers 20 aux buses. One engineer then runs both jobs, usually with an app at the stage for monitor tweaks.

The limit is attention, not routing. On larger shows a second engineer or a personal monitoring system takes the monitor load off the front of house position. Consoles with network expansion, like the StudioLive 32S with its AVB personal mixers or the SQ-5 with stage boxes, grow into that split more easily.

Do these mixers record multitrack audio without a computer?

Two of them do. The StudioLive 32S records multitrack audio to an SD card, and the TouchMix-30 Pro records 32 tracks direct to a hard drive. The X32 records uncompressed audio to a USB flash drive, and the SQ-5 records to a USB drive through SQ-Drive at up to 16 tracks at 96 kHz.

The TF5 and DL32S record multitrack audio over USB to a computer instead, at 34 x 34 and 32×32 channels. A laptop at the mix position is a small price for that capacity, but it is one more device to power, connect and keep awake during the show.

Is 96 kHz processing worth it for live shows?

It depends on the rig. The SQ-5 runs at 96 kHz with latency under 0.7 ms, which helps in-ear monitoring feel immediate and gives processing more headroom. The other five consoles here run at 44.1 or 48 kHz, which remains the standard rate for most live systems and digital snakes.

Sample rate also changes recording track counts and file sizes, and some expansion hardware runs at 48 kHz only. If your stage boxes, recorders and playback systems are 48 kHz devices, a 96 kHz console may spend its life converting down. Match the console rate to the rest of the chain.

Conclusion

For most bands and venues, the X32 and TF5 are the dependable full-surface picks, the StudioLive 32S wins on recording, and the SQ-5 wins on processing. Choose the DL32S for a stagebox rig or the TouchMix-30 Pro for touch control, and the format will fit the way your crew actually works, night after night.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.