Key takeaways
- Compare digital mixers for live bands with recallable preamps, monitor mixes, multitrack recording and stagebox options, with channel counts and buses checked.
A band is the hardest regular job in live sound, and the best digital mixers for live bands answer with recallable preamps, enough monitor mixes for every player, and a recording of the show without a laptop. Six current models below cover bar bands to touring acts, from tablet stageboxes to full consoles.
Quick verdict
Six mixers, six band sizes. The CQ-18T and LiveTrak L-20 fit self-run bands that mix from the stage; the Qu-16 and TF3 are consoles for a dedicated engineer; the DL32S and StudioLive 32SC put 32 inputs in a rack and grow with the act. Start with input and monitor counts, then choose a control style.
| Product | Mic inputs | Monitor mixes | Recording | Control |
|---|---|---|---|---|
| Allen & Heath Qu-16 | 16 | 7 (4 mono + 3 stereo) | 18 tracks to USB drive, 24×22 USB interface | 17 motor faders, touchscreen |
| Allen & Heath CQ-18T | 16 | 6 | 24×22 to SD and USB | 7-inch touchscreen, built-in Wi-Fi |
| Zoom LiveTrak L-20 | 16 | 6, switchable headphone or line | 22 tracks to SD, up to 24-bit/96 kHz | Channel faders, 9 scenes |
| Yamaha TF3 | 24 | 20 aux buses (8 mono + 6 stereo) | 34×34 via USB, 2×2 to USB storage | 25 motor faders, TouchFlow screen |
| Mackie DL32S | 32 | 15 output buses, 8 stereo aux sends | 32×32 USB interface | Stagebox, Master Fader app, 20 devices |
| PreSonus StudioLive 32SC | 16 local, 32 channels | 16 FlexMixes | SD multitrack, 64×64 USB interface | 17 motor faders, AVB expansion |
One pattern runs through the table: every model records the show somehow, because bands now sell, stream and review their own performances. The differences that matter are how many separate monitor mixes each player gets, whether the preamp gains come back with the scene, and how the system grows when the band adds members, in-ears or a second stage box.
The honest comparison is cost per input and per monitor mix once needed accessories, from stage boxes to tablets, are counted. A band that already owns tablets and in-ear systems will read a stagebox very differently from a band starting with wedges and a borrowed laptop, and a band that records every show should price the SD recorder it does not have to buy separately.
How we selected
Each mixer here was verified on an opened maker or full listing page, and each one fits band work on stated numbers: at least 16 microphone inputs locally or through its own ecosystem, multiple independent monitor mixes, full recall, and a multitrack or stereo recording path that needs no separate interface.
Two buying realities shaped the list. First, a band mixer is a system: cables, cases, tablets and stage boxes ride along, so each entry notes its ecosystem. Second, monitor counts were compared as independent mixes a player can actually use, not as raw bus numbers, because a stereo pair counted as two buses still serves one in-ear wearer.
Consoles that repeat models already used in the companion guide to digital mixers for general live work were avoided, so this list stands on its own. Where a page’s figures conflicted with another listing, the article follows the fuller specification sheet and the sources file records the difference. Sale status is flagged per model where listings disagreed.
The shortlist: digital mixers for live bands
The six entries run from the smallest self-op rig to a 32-channel rack system. Each entry leads with the numbers a band actually plans around: microphone inputs, monitor mixes, recording tracks and the way the mixer is controlled on the night, because those four decide load-in, soundcheck length and who has to run the show.
Allen & Heath Qu-16
The Qu-16 is the classic first digital console for a working band: a 19-inch rack-mountable desk with a fader per input, total recall, and processing drawn from the maker’s GLD and iLive touring systems. It suits a band with a regular engineer, or a house desk in a small venue hosting bands nightly.
Sixteen mono mic/line inputs on TRS and XLR carry recallable AnaLOGIQ preamps with 1 dB-step gain, joined by 3 stereo inputs. Twelve mix outputs on XLR provide 7 monitor mixes, 4 mono and 3 stereo, beside the main LR. Every input gets trim, polarity, high-pass filter, gate, insert, 4-band parametric EQ, compressor and delay; outputs add a third-octave graphic EQ. Four stereo FX engines come from the iLive library, with 2 dedicated sends and returns, and 4 mute groups plus 4 DCA groups organize a busy show.
Recall is the point: 100 scenes store the whole desk, 17 motorized faders snap to position, and the 800×480 touchscreen works with a SuperStrip of single-function controls. Recording runs two ways, a 24×22 USB audio interface to a computer and Qu-Drive, which records 18 channels at 48 kHz, 24-bit straight to a USB drive. A dSNAKE port links remote AudioRacks over a single Cat5 cable up to 120 m, the ME personal mixing system expands monitors, and the Qu-Pad and Qu-You apps cover remote mixing and personal monitor control. ProFactory presets for Audio-Technica, Sennheiser and Shure microphones speed up soundchecks. A built-in signal generator and an RTA with peak band indication round out the setup tools, and the spectrogram view helps find feedback frequencies before the audience does.
Allen & Heath CQ-18T
The CQ-18T is the self-op band’s answer: an 18-input digital mixer with built-in dual-band Wi-Fi, a 7-inch touchscreen and a set of assistants that do the soundcheck chores a band without an engineer usually skips. It is built for bands, producers and rental houses, as a main mixer in a small venue or a sub mixer on a larger stage.
Inputs total 18: 16 mic/line preamps split between 8 XLR and 8 combo XLR-1/4-inch sockets, plus a balanced stereo line input. Six monitor mixes leave on quarter-inch TRS, with XLR main outputs and 2 assignable headphone outputs. Processing runs at 96 kHz on an FPGA engine, and every channel carries EQ, compression and gating. Three custom SoftKeys and 3 Smart Rotaries sit beside the screen, and a dual footswitch connection handles changes mid-song.
The assistants define it. Gain Assistant sets preamp gain automatically and watches for peaks; Feedback Assistant finds feedback frequencies at setup in fixed mode and guards all outputs in live mode; four FX Assist engines adjust reverb and delay to the signal; an Automatic Mic Mixer serves speech between songs. Quick Channels dial a full channel of processing with one knob. Recording is 24×22 to SD card and over the USB-B interface, with stereo USB and Bluetooth playback channels for break music. CQ-MixPad gives the engineer full control from the room, and CQ4You lets each performer adjust only their own mix. One honest limit from the maker’s answers: CQ mixers cannot connect to digital stage boxes, so 18 inputs is the ceiling. The unit measures 13.6 x 9.5 x 3.5 inches and weighs 6.6 lb. It is also rack mountable at 6U with mounting hardware sold separately, per the specification table.
Zoom LiveTrak L-20
The LiveTrak L-20 is the rehearsal-room and club console for bands that record everything: it captures 22 tracks to an SD card while it mixes, with six personal monitor mixes and a plain fader-per-channel surface that any member can run. Bigger arrangements are its stated purpose.
Twenty channels split into 16 mono mic/line inputs on XLR/TRS combo sockets and 2 stereo line inputs on TS or RCA. Preamps reach +60 dB of gain with an equivalent input noise of -128 dBu, channels 1 and 2 switch to Hi-Z for guitar and bass, and channels 3 to 16 carry a 26 dB pad. Each channel has a fader, 3-band EQ with a sweepable mid, a low-cut filter adjustable from 40 to 600 Hz, and the mono channels add one-knob compression. Two effects buses carry 20 reverb, delay and chorus effects, and 9 scenes recall fader positions, EQ, pan and mutes.
Monitoring is the strong suit: six monitor outputs each carry their own mix with effects and switch between a powered headphone output and a balanced line output for stage wedges, and a seventh headphone output lets the engineer hear the main mix or any monitor mix. Recording takes 22 tracks at once, the 20 channels plus a stereo mix, as WAV files at up to 24-bit/96 kHz to SD cards up to 1 TB, with 20-track playback; effects, EQ and the interface rest at 96 kHz, a limit the maker states. Over USB it is a 22-in/4-out interface that works while the card records, and an optional Bluetooth adapter adds iPad control. The desk measures 445 x 388.4 x 82.6 mm and weighs 3.71 kg. A built-in slate microphone records talkback and notes onto the tracks, and the backlit LCD keeps settings readable on dark stages.
Yamaha TF3
The TF3 is the mid-size console for a club, a touring act or a busy house system: 24 recallable preamps, motorized faders and a mix that comes back exactly as saved. On a night with three bands and short changeovers, that recall is the difference between mixing the show and rebuilding it.
The surface holds 25 motorized 100mm faders, 24 channels plus a master, over a mixing engine of 48 input channels: 40 mono, 2 stereo and 2 returns. Local inputs are 24 analog XLR/TRS combo mic/line sockets with recallable D-PRE preamps and 2 RCA stereo line inputs, with 16 analog XLR outputs. Twenty aux buses, 8 mono and 6 stereo, plus stereo and sub buses feed monitors and mains, and 8 DCA groups with roll-out tame large channel counts. Onboard DSP carries 8 effects engines and 10 graphic EQs.
TouchFlow operation centers on the touchscreen, with 1-knob COMP and 1-knob EQ for fast fixes, GainFinder to support gain setup, and QuickPro Presets for instant channel setups drawn from pro engineers. Two scene memory banks store shows. Recording runs 34 x 34 channels over USB 2.0 to a computer, plus 2 x 2 to a USB storage device, and an expansion slot takes the NY64-D Dante interface card for networked systems. TF Editor, TF StageMix and MonitorMix apps cover offline setup, remote mixing and personal monitors. The console measures 28.2 x 8.9 x 23.6 inches, weighs 17.0 kg and draws 110 W. Equivalent input noise is listed at -128 dBu typical, dynamic range at 110 dB typical, and crosstalk at -100 dB.
Mackie DL32S
The DL32S removes the console entirely: a stagebox with 32 inputs and built-in Wi-Fi that the band controls from tablets, phones and computers through the Master Fader app. It lives on stage or in a rack where the cables are, and the engineer mixes from anywhere in the room.
All 32 inputs carry recallable Onyx+ microphone preamps: channels 1 to 16 are XLR, channels 17 to 32 are combo XLR/TRS, and channels 31 and 32 accept Hi-Z instrument cables. Ten fully assignable XLR outputs plus a headphone output serve mains and monitors. Fifteen output buses include 8 stereo-linkable aux sends and 6 stereo-linkable subgroups, with 6 VCAs and 6 mute groups. Every input channel has 4-band parametric EQ with high-pass filter, gate, compression and an RTA/spectrograph; output buses add 31-band graphic EQ, compressor/limiter and alignment delay; 4 stereo FX processors cover reverb, delay, chorus and flanger.
Up to 20 devices can control the mixer at once across iOS, Android, Mac and PC, with every setting recallable for fast setups. The 32×32 USB 2.0 interface records multitrack to a computer and plays tracks back into each channel for virtual soundchecks. The digital side runs at 48 kHz and 24-bit with 1.5 ms system latency, an EIN of -127 dBu and a dynamic range over 110 dB from mic input to main output. The box measures 7.3 x 17.6 x 5.8 inches in a 4RU rack format and weighs just 8.8 lb. Modern and Vintage options for the compressors, gates and EQs let each channel lean classic or clean, and full I/O routing offers A/B sources per channel.
PreSonus StudioLive 32SC
The StudioLive 32SC packs a 32-channel, 40-input mixing system into a rack-mountable frame with motorized faders, built for bands ready to grow into networked stage boxes and personal monitor mixers. It also works as a stagebox for a larger Series III console.
Local inputs are 16 XMAX microphone preamps on combo connectors, fully recallable with gain from 0 to +60 dB and phantom power switchable per channel, plus line inputs and an RCA tape pair. The FLEX DSP engine runs 286 simultaneous processors across 26 mix buses. Sixteen FlexMixes can each be set as an aux mix, a subgroup or a matrix mix, and 24 DCAs group channels for one-fader control. Fat Channel processing puts vintage EQ and classic compressor models, 10 EQ and compressor models in all, on every input and bus, and the FLEX FX processor holds 4 slots of reverb emulations and delays on 4 dedicated buses.
AVB networking is the growth path: NSB stage boxes add remote inputs, EarMix 16M personal monitor mixers give each player control, and an SW5E switch ties it together over Ethernet. Recording is the strongest here: a 64×64 USB interface, an onboard multitrack SD recorder with Virtual Soundcheck, and Capture software that records all 32 channels. UC Surface controls the desk from Mac, Windows, Android and iPad, QMix-UC handles personal monitoring, and DAW control runs through MCU and HUI emulation modes. Converters list a 115 dB dynamic range with 1.9 ms total system latency. The unit measures 17.59 x 6.51 x 22.97 inches and weighs 23.15 lb. Password-protected user profiles can restrict access to specific features, and scene management organizes scenes into projects with scene lock and per-channel recall protection.
Taken together, the six split along one line: who holds the faders. Two put a screen in every player’s pocket, two give an engineer a full console, and two meet in the middle with compact surfaces and deep recording. The buying guide turns that split into checks a band can run against its own stage plot.
Buying guide: digital mixers for live bands
Band buying starts from the stage plot, not the brochure. Count the inputs the band really uses on its biggest night, count the monitor mixes each member demands, and decide who runs sound. The five checks below turn the shortlist into a single defensible choice for a given act.
Count monitor mixes before channels
Monitor mixes, not inputs, are where band mixers run out first. A five-piece with wedges needs at least five independent mixes; in-ears push players toward stereo mixes, which halve the count on paired buses. The CQ-18T and L-20 offer 6 mixes, the Qu-16 offers 7, and the two 32-channel systems scale far beyond.
Personal monitor systems change the math again: the Qu-16’s ME system and the 32SC’s EarMix 16M units move mix control to the player, which can turn a 6-mix desk into a workable in-ear rig for a larger band.
Recall is the real time saver
Every model here recalls its full state, but the details differ: the Qu-16 stores 100 scenes, the TF3 keeps two scene banks, the L-20 stores 9 scenes, and the stageboxes recall every setting from the app. Recallable preamp gain matters most, because gain takes longest to rebuild by ear.
Stagebox or surface: place the inputs
A stagebox such as the DL32S sits where the cables land, kills the long analog snake, and lets the engineer roam with a tablet; the risk is dependence on the wireless link and a charged screen. A surface such as the TF3 or Qu-16 keeps physical faders working with the network down.
Record the show without a laptop
Three models record multitrack with no computer attached: the L-20 takes 22 tracks to SD, the CQ-18T takes 24×22 to SD, and the 32SC records to SD with virtual soundcheck; the Qu-16 records 18 tracks to a USB drive. The DL32S and TF3 record over USB to a computer instead.
Expansion: snakes, stageboxes and personal mixers
Growth paths differ sharply. The Qu-16 adds remote inputs over dSNAKE and personal mixers through the ME system. The 32SC grows over AVB with NSB stage boxes and EarMix 16M personal mixers. The TF3 takes a Dante card. The CQ-18T, by the maker’s own answers, cannot add a stage box at all.
FAQ
Five questions cover what band buyers ask most: how many inputs a typical act needs, how monitor mixes scale, which models record a gig on their own, whether tablet control needs the internet, and what a virtual soundcheck actually does. Answers rest on the specifications stated on the opened pages.
How many inputs does a live band need?
A four-piece rock band typically lands between 12 and 16 inputs once the drum kit is fully miked, and larger acts with keys, horns or playback reach 24 to 32. The 16-input models here fit the first case; the TF3 covers the middle at 24 local inputs; the DL32S and 32SC cover 32 channels.
How many monitor mixes should a band mixer have?
One per performer is the working rule, plus one for the engineer. Wedges can share mixes between nearby players at a push; in-ear systems usually cannot, and stereo in-ears consume paired buses. The shortlist spans 6 mixes on the CQ-18T and L-20, 7 on the Qu-16, and 20 aux buses on the TF3.
Can these mixers record a gig multitrack?
Yes, by three routes. Onboard media: the L-20 records 22 tracks to SD, the CQ-18T records 24×22 to SD, the Qu-16 records 18 tracks to a USB drive, and the 32SC records multitrack to SD. Over USB to a computer, the DL32S moves 32×32 and the TF3 moves 34×34. The difference is whether a laptop must be present.
Do tablet mixers work without internet?
Yes. The DL32S creates its own Wi-Fi network with its built-in router, and the Master Fader app talks to the mixer directly on iOS, Android, Mac or PC; no internet is involved. The CQ-18T likewise generates its own dual-band network. What they need is a charged tablet and a network password set on the mixer.
What is a virtual soundcheck?
It is playback of a recorded multitrack show through the same channels, so the engineer can tune the room and the monitors without the band on stage. The 32SC builds it into its SD recorder, and the DL32S supports it by playing USB tracks back into each channel for the same purpose.
Conclusion
For live bands, match the mixer to the crew: the CQ-18T and L-20 for self-run acts that record everything, the Qu-16 for a first real console, the TF3 for clubs and touring changeovers, the DL32S for a tablet-run 32-input stagebox, and the 32SC for networked growth over AVB as the act adds players and in-ear systems.