Key takeaways
- Compare the best audio mixers for streaming, from the RODECaster Pro II and Duo to the Yamaha ZG02, Mackie MainStream, and MAONO AME2, by inputs and control.
A live stream gives you no second take, so the audio mixers for streaming in this guide were chosen for the controls a host needs mid-show: microphone inputs with real gain, separate level control for voice, chat, and game sound, and outputs that feed both the stream and your own headphones without a tangle of extra boxes.
What streaming asks from an audio mixer
A streaming mixer has to do three jobs at once: capture your voice cleanly, blend it with game or desktop sound at the right balance, and send a finished mix to the streaming software while you monitor yourself with no distracting delay in your headphones.
One mic or several: inputs and preamps
The first question is how many microphones the show uses. A solo streamer needs one good input, while a couch co-op show or a talk format needs two or four. Look at the preamp gain figure as well, because quiet dynamic microphones ask for far more gain than sensitive condensers do.
The RODECaster Pro II and Duo use Revolution Preamps rated at up to 76 dB of gain with an equivalent input noise of -131.5 dBV, figures that let them drive quiet dynamic microphones without a separate booster. The Mackie MainStream offers 60 dB of gain on its single combo input, and the MAONO Maonocaster AME2 provides a three-level gain adjustment that tops out at 60 dB, with steps marked for different microphone sensitivities.
Phantom power matters if your microphone is a condenser. The Yamaha ZG02 supplies +48V on its combo jack, the MainStream provides +48V on its combo input, and the AME2 carries built-in 48V phantom power, so all three run condenser microphones directly. Headset users are covered too: the Duo has a 3.5mm TRRS headset input, the ZG02 takes a headset mic on a 3.5mm mini jack, and the MainStream includes a headset mic and return connection.
Separate control of voice, chat, and game sound
The mix a stream audience hears is a balance of at least three sources: your voice, your teammates or guests, and the game or media sound. Hardware knobs or faders for each source let you correct that balance live, in the middle of a match or a conversation, instead of tabbing out to software sliders.
Yamaha built the ZG02 around exactly this split. The computer sees two virtual USB devices, labeled Voice and Streaming on the input side, so chat audio and the stream mix can be assigned to different apps such as Discord and OBS. The RODECaster consoles take the fader approach: the Pro II gives nine assignable channels with six physical faders and three virtual faders, and the Duo gives seven assignable channels with four physical and three virtual faders.
The MainStream puts dedicated level controls for the microphone, the PC audio return, and the HDMI audio on its top panel, with stereo output metering so you can see the outgoing level. The AME2 lets each microphone, the sound pads, the monitor, and the input and output volumes be adjusted individually, which suits a host balancing a mic against phone-fed music or effects.
Mix-minus, loopback, and phone guests
Remote guests create the classic streaming headache: if a caller hears their own voice coming back, the conversation falls apart. Mix-minus solves it by sending the guest everything except their own signal, and several of these consoles build that routing in rather than leaving it to software workarounds.
Both USB interfaces on the RODECaster Pro II include a mix-minus feed, and the Duo shares the same dual USB-C layout for connecting two computers or mobile devices at once. The MainStream applies mix-minus to its smartphone input so a call-in guest does not hear an echo, and the AME2 includes a loopback switch among its streaming features.
Phone and Bluetooth connections widen the guest options further. The Pro II carries Bluetooth for phone calls and audio streaming, the Duo lists advanced Bluetooth connectivity for phone call integration, and the AME2 connects over Bluetooth 4.2 while also offering two live outputs for smartphones, so a show can stream to a phone platform and a computer setup at the same time.
The five audio mixers for streaming in detail
Each console below was checked on its maker’s or a detailed product page, and the figures quoted are the ones those pages state: channel and fader counts, preamp gain, USB formats, processing lists, and the physical size of the box that will sit next to your keyboard.
RODE RODECaster Pro II
The RODECaster Pro II is the largest console here: four Neutrik combo inputs, nine assignable channels, and recording to microSD, USB storage, or a computer in multitrack or stereo. It is built for shows with several microphones, live sound effects, and a host who wants processing handled inside the box.
Its Revolution Preamps provide up to 76 dB of gain at -131.5 dBV equivalent input noise across the four combo jacks, which accept microphones, instruments, and line-level devices. Six physical faders and three virtual faders cover the nine channels, and a 5.5-inch high-definition touchscreen with haptic feedback and a rotary encoder handles setup. Eight SMART pads with bank switching give 64 actions in total, from sound effects and music beds to voice effects such as reverb, echo, and pitch, MIDI commands, and mixer actions like fade-ins.
Processing comes from a quad-core audio engine with Aphex emulations of the Aural Exciter, Big Bottom, and Compellor, plus a compressor, noise gate, high-pass filter, de-esser, and three-band equalizer on each channel. Dual USB-C interfaces connect two computers or mobile devices at once; the first interface runs 32-bit with a 2-in/16-out multichannel device and a mix-minus feed, the second runs 24-bit with mix-minus. A built-in wireless receiver links up to two RODE Series IV transmitters, four headphone outputs cover a full panel of hosts, and balanced line outputs feed monitors. The console measures 305 x 270 x 60 mm and weighs 1960 g (4.32 lb). Note that it has no TRRS headset input, so headset users should look at the Duo or the ZG02.
RODE RODECaster Duo
The RODECaster Duo condenses the Pro II formula into a smaller console for one or two people: two Neutrik combo inputs, seven assignable channels, and the same Revolution Preamps, rated at -131.5 dBV equivalent input noise with 76 dB of gain, so a single host or a pair of hosts gets the same quiet front end.
Four physical faders and three virtual faders handle the seven channels, and six programmable SMART pads with bank switching trigger sounds, music beds, voice effects, MIDI commands, and mixer actions. The 5.5-inch high-definition touchscreen with haptic feedback and rotary encoder mirrors its bigger sibling, and the per-channel processing list matches as well: Aphex emulations including the Aural Exciter, Big Bottom, and Compellor, plus a compressor, noise gate, high-pass filter, de-esser, and three-band equalizer on each channel.
For streaming, the Duo’s dual USB-C interfaces connect two computers or mobile devices at once, which suits a streaming PC plus a chat or recording machine. A 3.5mm TRRS input takes headphones and headsets, something the Pro II lacks, and the built-in wireless receiver connects up to two RODE Series IV transmitters for cable-free microphones. Recording runs to a microSD card, USB storage device, or computer in multitrack or stereo, and two headphone outputs with balanced 1/4-inch line outputs cover monitoring for a host and a guest.
Yamaha ZG02
The Yamaha ZG02 is a compact mixer with a USB interface designed for multiplayer gamers and game streamers. Instead of many microphone inputs, it concentrates on one player: a rear-panel XLR/TRS combo jack with +48V phantom power for a microphone, or a 3.5mm headset mic input on the front, though the two cannot be used at the same time.
Its streaming strength is routing. The USB connection presents two virtual devices, so audio can be assigned to two different apps, for example Discord for voice chat and OBS for the stream, and a dedicated USB connection also serves PlayStation 4/5 or Nintendo Switch. USB audio runs at 48 kHz with 24-bit depth on a computer and 16-bit on a console. Three knobs manage your own voice, team voices, and game sound, and the panel carries a mute button, a monitor output select button, and three effect preset buttons, two for voice and one for game sound.
Yamaha’s DSP adds ZG Surround, Focus Mode/EQ, and 3D Voice Chat, with detailed settings made in the ZG Controller software for Windows and Mac; the multi-channel USB input is virtualized for headphones using ViReal technology, and Focus Modes can emphasize parts of the game soundscape such as environmental sounds. Software mic settings include compression, limiter, reverb, pitch, and radio voice effects. The unit measures 162 x 61 x 113 mm, weighs 0.6 kg (1.32 lbs), draws at most 4.5 W from its 5 V USB power, and works with the Elgato Stream Deck family of controllers.
Mackie MainStream
The Mackie MainStream is a live streaming and video capture interface, the only pick that takes the video feed as well as the audio. An HDMI input carries a built-in capture card, and an HDMI passthrough rated at 4K x 60 fps feeds your monitor, so one box can replace a capture card in a console streaming setup for Switch, Xbox, or PlayStation.
Audio centers on one XLR/TRS combo mic input with +48V phantom power and 60 dB of gain, joined by a chat headset input, an aux input, and a smartphone input for live streaming phone calls, with mix-minus so the caller does not hear an echo. The top panel gives level control for the mic, the PC audio return, and the HDMI audio, plus mic and aux mutes, an HDMI audio mute, stereo output metering, and headphone and monitor level control with a direct monitoring switch.
Six multifunction keys trigger samples and transitions, and a dual USB-C input hub connects extra cameras, USB microphones, and other devices while the unit itself links to the computer over a single bus-powered USB-C interface. The included Matrix software adds up to six virtual inputs, such as Discord or a music app, and four hardware inputs, with vocal effects and 24 virtual pads for samples, and Mackie lists compatibility with Mac, PC, PlayStation, and Xbox.
MAONO Maonocaster AME2
The MAONO Maonocaster AME2 is an integrated audio production studio aimed at streamers, podcasters, and musicians who also stream from a phone. Two microphone inputs, labeled MIC1 and MIC2, accept XLR condenser and dynamic microphones, 6.35mm dynamic microphones, and 3.5mm microphones, though USB microphones are not supported.
The preamp section offers a three-level microphone gain adjustment supporting up to 60 dB, with the side switch positions marked 40 dB, 50 dB, and 60 dB for different microphone sensitivities, plus built-in 48V phantom power. A 32-bit chipset and a DENOISE function handle the digital side, and the effect set includes six reverb modes with adjustable time and depth, a 12-step auto-tune, three modifiable tones for treble, mid-range, and bass, and pitch changer knobs. Sidechain, music only, and a loopback switch are included, and a dry/wet mode can bypass all processing to record a pure microphone signal.
Connections run over USB-C to a computer or tablet, with two live outputs for smartphones, a monitor output for a studio monitor, and an aux input for accompaniment from a phone or other device. Audio runs at 48 kHz and 16-bit, with a frequency response of 20 Hz to 20 kHz and THD under 0.05 percent at 1 kHz, and Bluetooth 4.2 covers wireless sources. A built-in 2000 mAh Li-Polymer battery gives approximately eight hours of working time after a charge of about three hours, and the body measures 24.5 x 15.7 x 5.5 cm including the buttons.
Comparing audio mixers for streaming side by side
The table gathers the headline figures from the product pages: microphone inputs, gain, channel or fader counts, and the USB format each console presents to the computer. Use it to shortlist, then read the per-product notes above for the routing details that a table cannot show.
| Model | Mic inputs | Preamp gain | Channels / faders | USB audio |
|---|---|---|---|---|
| RODE RODECaster Pro II | 4 combo | Up to 76 dB | 9 channels, 6 physical + 3 virtual faders | Dual USB-C, 48 kHz, 32-bit / 24-bit |
| RODE RODECaster Duo | 2 combo + TRRS headset | Up to 76 dB | 7 channels, 4 physical + 3 virtual faders | Dual USB-C |
| Yamaha ZG02 | 1 combo + headset mic | Not stated on page | 2 virtual USB devices | 48 kHz, 24-bit PC / 16-bit console |
| Mackie MainStream | 1 combo + headset | 60 dB | 6 multifunction keys | Single USB-C, bus powered |
| MAONO Maonocaster AME2 | 2 mic inputs | Up to 60 dB, 3 levels | Individual volume per source | USB-C, 48 kHz / 16-bit |
Channels, faders, and pads
Physical faders are the fastest way to ride levels during a live show. The Pro II’s six physical faders plus three virtual faders cover nine channels, and the Duo’s four physical plus three virtual cover seven, while both add SMART pads, eight on the Pro II and six on the Duo, for sounds and actions you fire repeatedly during a stream.
The other three consoles trade faders for focused controls. The ZG02 uses three knobs for voice, team, and game sound plus preset buttons, the MainStream uses level controls for its three main feeds plus six multifunction keys, and the AME2 gives individual volume adjustment for each microphone, the sound pads, the monitor, and the inputs and outputs. None of these approaches is wrong; the question is how many sources you actually ride during a show.
USB connections and virtual devices
How a console appears to the computer decides how flexible the routing is. The two RODECaster models present dual USB-C interfaces, so two computers or mobile devices stay connected at once, and the Pro II’s first interface adds a 2-in/16-out multichannel device that recording software can split into separate tracks.
The ZG02 presents two virtual devices on one connection, which is the neatest answer for chat-plus-stream routing on a single PC, and it also serves consoles directly. The MainStream keeps one bus-powered USB-C link to the computer and instead expands the device side with its dual USB-C hub, while the AME2 uses USB-C for the computer and its live outputs for phones, covering mobile platforms the others reach only through a computer.
Processing you can hear on air
Onboard processing shapes your voice before it reaches the stream, which matters because streaming software applies effects after the mix is made. The RODECaster pair carries the deepest set: Aphex emulations, a compressor, noise gate, high-pass filter, de-esser, and three-band equalizer, all set from the touchscreen or the VoxLab editor.
The ZG02 focuses its DSP on game streaming, with surround virtualization, focus modes, and voice effects such as compression, limiter, reverb, pitch, and radio voice, edited in the ZG Controller app. The AME2 leans toward entertainment effects, with reverb modes, auto-tune, tone controls, a pitch changer, and noise reduction, while the MainStream adds vocal effects through its Matrix software rather than on the hardware itself.
Choosing among audio mixers for streaming
Start from the show format rather than the spec sheet. Count the microphones, list the sound sources the audience hears, and note whether a console, a phone, or a second computer is part of the setup. The right console is the one whose inputs and routing match that list without adapters stacked on adapters.
Solo game streams and team chat
A solo game streamer with a squad in voice chat is the exact case the ZG02 was designed for: one microphone, three knobs for voice, team, and game, virtual devices that separate chat from the stream mix, and surround and focus modes for the player’s own headphones. It is also the smallest and lightest box here, at 0.6 kg.
If the same setup also needs video capture, the MainStream folds the capture card into the mixer, taking the console feed over HDMI with a 4K x 60 fps passthrough to the monitor, and its six keys handle samples and transitions. A streamer who plays on PC and wants the capture card for a camera instead gets the same benefit through the HDMI input.
Talk streams, guests, and phone calls
Talk formats live or die on guest audio. In the room, the Pro II’s four combo inputs and four headphone outputs cover a host plus three guests, each with their own fader and processing, and the Duo covers a host and one guest with two inputs and two headphone outputs, plus a TRRS headset option the Pro II does not offer.
Remote guests point to the connection list: Bluetooth phone calls on both RODECaster models, a smartphone input with mix-minus on the MainStream, and phone live outputs plus Bluetooth on the AME2. The AME2’s battery also suits talk streams recorded away from a desk, at an event or in another room, with about eight hours of working time per charge.
Recording the stream for later editing
Many streamers edit the show afterward for video platforms, and separate tracks make that far easier. The Pro II records in multitrack or stereo to a microSD card, USB storage, or a computer, and its multichannel USB device can feed separate tracks to recording software; the Duo records multitrack or stereo to the same destinations.
The other consoles record the finished mix rather than separate tracks, which is fine when the live balance is the final balance. The AME2’s dry mode is a useful middle path for voice work, bypassing all processing so the pure microphone signal is recorded and effects can be decided later in editing software.
Setup checks before your first live session
Run one full rehearsal stream, unlisted or private, with the exact microphone, headphones, and software you plan to use. Most streaming audio problems, echo, mismatched levels, a guest who cannot be heard, show up in rehearsal and are quick to fix there, but embarrassing to debug in front of a live audience.
Levels, monitoring, and latency
Set the microphone gain first, speaking at your loudest show volume, then balance game and chat sound under the voice. Monitor from the console’s own headphone output where possible, since that is the mix your audience hears, with nothing between you and the outgoing signal but the console itself.
The headphone outputs differ: the Pro II provides four headphone outputs, the Duo two, the ZG02 a 3.5mm phones output with a monitor select button for switching to speakers, and the MainStream a direct monitoring switch with its own headphone and monitor level control.
Watch the outgoing meters while you test. The MainStream shows stereo output metering on its panel, and the RODECaster touchscreens display channel levels, so a quick loud laugh or game explosion during rehearsal tells you whether the mix has headroom or is slamming the top of the meter.
Software routing in OBS and chat apps
Assign each source deliberately in your software. On the ZG02, point the chat app at the Voice device and the streaming software at the Streaming device, as Yamaha’s own example describes. On the RODECaster models, decide which computer takes the main interface and which takes the second, and check that mix-minus is active before a guest joins.
On the MainStream, the Matrix software can add up to six virtual inputs and four hardware inputs, so route chat, music, and game sound there and confirm each one appears at the level you set. Finish by recording a short local test, playing it back on different speakers or earbuds, and only then going live.
Conclusion
For multi-microphone shows, the RODECaster Pro II and Duo bring the deepest inputs, processing, and recording options; for game streams, the ZG02 and the capture-ready MainStream fit the desk better; and the battery-powered AME2 covers phone-based streaming with effects to spare. Match the console to your show format first.