Key takeaways
- Compare digital mixers for church worship with channel counts, mic preamps, monitor mixes, service recording and control apps, from maker-listed specs here.
A church mixer has to handle a worship band on Sunday morning, a single pastor microphone at a midweek service, and a volunteer at the desk who may have one hour of training. The digital mixers for church use in this guide were picked for channel count, monitor mixes, scene recall and tools that help spoken word stay clear in a reflective room.
Quick verdict
For a mid-size or large sanctuary, the Midas M32 LIVE brings 40 input channels, 32 Midas PRO preamps and 25 mix buses with full scene recall. Smaller churches get more value from the Yamaha TF1, the app-controlled Behringer X Air XR18 and Allen & Heath CQ-20B, or the compact QSC TouchMix-16 with its touchscreen and setup wizards.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Midas M32 LIVE | Console with motorized faders | Large sanctuaries and touring worship teams | 40 input channels, 32 mic preamps | Large, heavy surface at 55 lb |
| Yamaha TF1 | Compact console | Small to mid-size churches with volunteers | 40 input mixing channels, 17 motor faders | 16 analog inputs on the rear panel |
| Behringer X Air XR18 | Stagebox, app controlled | Small churches and portable services | 18 inputs, built-in WiFi control | No faders or screen on the unit |
| Allen & Heath CQ-20B | Stagebox, app controlled | Speech-heavy services and small bands | 20 inputs, 96kHz processing | No faders or screen on the unit |
| QSC TouchMix-16 | Compact touchscreen console | Small venues that want guided setup | 22 mixing channels, 10 aux mixes | 16 mic/line inputs on the panel |
The split in this list is between surfaces with physical faders and stagebox mixers that live on stage and run from a tablet. Fader surfaces suit a fixed sound booth where the same volunteer team works every week. Stagebox models suit portable churches and small rooms where the mixer sits near the band and the operator mixes from a seat in the congregation.
How we selected
Each mixer here was chosen from its published specification: input channels and mic preamps for the band and choir, aux buses for monitor mixes, scene memory for repeatable Sunday setups, and processing such as automatic mic mixing, feedback tools and per-channel EQ and dynamics for speech in a live room.
Church sound has two jobs that pull in opposite directions. Music needs channel count, monitor mixes and effects. Speech needs gain control, feedback resistance and clarity at low volume in rooms that often have long natural reverb. A mixer that only serves one of those jobs leaves the other to chance, so both sides were weighed for every pick.
Volunteer operation also shaped the list. Presets, scene recall, guided setup tools and app control all reduce the training a new operator needs, so those features are noted in the product sections because they matter in a real church rota.
- At least 16 mic inputs, or a clear expansion path, for a band plus speech microphones
- Enough aux buses for separate monitor mixes, on stage or in-ear
- Scene or preset recall so a service setup returns exactly each week
- Multitrack or stereo recording for archives, podcasts and virtual soundcheck
- Published dimensions and weight that fit a booth, rack or portable case
The digital mixers for church in this guide
These five consoles cover the range from a portable plant church to a large sanctuary with a full band and choir. Each entry states who the mixer suits, the published specifications behind the pick, and the limits a church media team should plan around before committing a budget line to it.
Midas M32 LIVE
The M32 LIVE is the full-size console in this group: 40 input channels, 32 Midas PRO microphone preamps and 25 time-aligned, phase-coherent mix buses. For a large sanctuary with a big worship band, choir microphones and multiple speaking positions, it is the pick with the most room to grow.
The surface carries 25 motorized 100mm Midas Pro faders rated at 1 million cycles, a 7 inch TFT display that the maker describes as viewable in daylight, and 8 DCA groups with 6 mute groups for managing sections of a large mix. Scene tools are deep: 100 scenes and snippets with 500 cues, which suits churches that run several service formats with different bands and speaking segments.
Processing is built around a 40-bit floating point engine with a listed dynamic range of 112 dB. Every channel has a 4-band EQ, gate and compressor from the published specification, and the maker lists more than 50 signal processors and effects across 8 stereo DSP engines. Phantom power is 48V and switchable per input, which matters when condenser choir microphones share a stage with dynamic handhelds.
Recording and expansion are strong. A 32-in/32-out USB 2.0 audio interface at 48kHz handles multitrack capture, dual SD and SDHC card slots record 32 channels directly, and AES50 networking with Ultranet expands the system to up to 96 channels with P16 personal monitoring. The listing gives a weight of 55 lb, so this is a fixed-install or wheeled-case console rather than a carry-in option.
- Pros: 40 input channels and 32 preamps cover large bands and choirs
- Pros: 25 mix buses give generous monitor and broadcast routing
- Pros: dual SD recording plus 32×32 USB capture
- Cons: 55 lb surface needs a fixed booth or a flight case and two people
- Cons: the feature depth takes longer for a new volunteer to learn
Buy it if your sanctuary runs a large band, several vocalists and multiple speech microphones and you want one console for years of services. Skip it if your church is portable or your team is one volunteer with a tablet.
Yamaha TF1
The TF1 is the compact console for small to mid-size churches: 17 motor faders, 40 input mixing channels and 20 aux buses in a rack-mountable frame. Yamaha built the TF series around TouchFlow Operation and channel presets, which makes it a practical desk for trained volunteers rather than career engineers.
The rear panel carries 16 analog XLR/TRS combo mic/line inputs and 2 analog RCA stereo line inputs, with 16 analog XLR outputs. The 40 input mixing channels are made up of 32 mono, 2 stereo and 2 return channels, and an expansion slot takes the NY64-D audio interface card for stagebox growth. The 20 aux buses split into 8 mono and 6 stereo, plus stereo and sub buses, so monitor mixes for a band are well covered.
Yamaha lists 8 DCA groups with Roll-out, 8 effects and 10 GEQ processors, and a sampling rate of 48 kHz with signal delay under 2.6 ms. Channel presets were created, in the maker’s wording, in cooperation with leading microphone manufacturers and eminent sound engineers, giving volunteers a starting point for vocals, guitars and keyboards. Three apps extend the console: TF Editor, TF StageMix and MonitorMix for personal monitor control.
Recording runs to 34 x 34 channels over USB 2.0, plus 2 x 2 through a USB storage device, and the console ships with Steinberg Nuendo Live software. Published dimensions are 510 x 225 x 599 mm (20.1 x 8.9 x 23.6 inches) and net weight is 13.5 kg (29.8 lb), so one person can move it between a booth and a storage room.
- Pros: presets and TouchFlow Operation shorten volunteer training
- Pros: 20 aux buses cover band monitor mixes at this size
- Pros: 34×34 USB recording with bundled live recording software
- Cons: 16 analog inputs cap a growing band without an expansion card
- Cons: no built-in WiFi; app control runs through the network connection
Buy it if your church has a small band, a volunteer rota and a fixed or semi-portable setup. Skip it if you already need more than 16 stage inputs every week.
Behringer X Air XR18
The XR18 is a stagebox mixer with no faders and no screen: 18 inputs and 16 Midas-designed programmable mic preamps in a 3U rack-style box that sits on stage and runs from a tablet, phone or computer. For small churches and portable services, it removes the sound booth from the equation entirely.
Control comes from a built-in tri-mode WiFi router, so the operator can mix from a seat in the congregation with the free apps for iOS, Android, Windows, Mac and Linux. The processing list is deep for the size: 18 input channels, 4 FX return channels, 6 aux buses and a main LR bus, with 4 true stereo effects engines drawn from the X32 effects rack and a 100-band real time analyzer for channel and bus EQ.
Two features speak directly to church use. Dugan-style auto-mixing manages gain sharing across open microphones, which helps panel discussions, prayer segments and multi-microphone teaching. Ultranet connectivity links Behringer P-16 personal monitoring systems, so band members can control their own monitor mixes. Six XLR aux outputs and two XLR main outputs cover monitors and the main speakers.
The 18 x 18 bidirectional USB interface records services to a computer at 24-bit, 44.1 or 48 kHz, with a listed dynamic range of 114 dB from the 40-bit floating point processing. Published dimensions are 333 x 149 x 140 mm and weight is 3.2 kg (7.1 lb), with power consumption of 30W, so it travels in a small rack or case and sets up in minutes.
- Pros: auto-mixing helps speech segments with several open microphones
- Pros: built-in WiFi removes the need for a separate router
- Pros: 3.2 kg stagebox suits portable and multi-use rooms
- Cons: no physical faders; a dead tablet battery stops the mix session
- Cons: 6 aux buses limit separate monitor mixes for larger bands
Buy it if your church meets in a rented or multi-use space and one operator mixes from the congregation. Skip it if your team prefers hands-on faders or needs more than six monitor mixes.
Allen & Heath CQ-20B
The CQ-20B is the highest channel-count model in the CQ range: 20 inputs and 8 outputs in a stagebox format controlled by the CQ MixPad app. Its 96kHz processing and set of assistant tools make it a strong fit for churches where speech clarity and fast setup matter more than a large fader surface.
Inputs are 8 XLR sockets and 8 XLR/TRS combi sockets for 16 mic/line channels, plus 2 stereo line inputs. Outputs are 2 XLR for the main mix, 6 XLR for monitors and an assignable Alt Out. Built-in dual-band WiFi hosts the control connection with no external access point, and a dedicated stereo Bluetooth input plays walk-in music from a phone.
The assistant tools are the story here. The maker lists Gain Assistant for fast setup and ongoing level monitoring, Feedback Assistant with up to 16 filters per output, FX Assist, and an automatic mic mixer on all inputs for speech-heavy services. Channels run in Quick Channels mode with one-knob processing or Complete Channels mode for detailed work, which lets a volunteer start simple and an experienced operator go deeper on the same desk.
Recording covers both USB and SD: the USB audio interface and SD record/playback run 24 x 24 at 48kHz and 16 x 16 at 96kHz. Four FX engines, 4 DCA groups and 4 mute groups round out the specification. The opened listing page does not state dimensions or weight, so confirm the physical size with the maker before planning a rack or case.
- Pros: Feedback Assistant and Gain Assistant speed up weekly setup
- Pros: automatic mic mixing on all inputs suits teaching and panels
- Pros: 96kHz processing with USB and SD multitrack recording
- Cons: app-only control, with no faders or screen on the unit
- Cons: 6 monitor outputs cap in-ear mixes for bigger bands
Buy it if your services lean on speech, your band is small, and your operator is comfortable mixing on a tablet. Skip it if you need a physical surface or more than six monitor sends.
QSC TouchMix-16
The TouchMix-16 packs 22 mixing channels and a capacitive touchscreen into a case-sized console that one person can carry. QSC aimed it at users who need guided setup: 120 presets, Anti-Feedback and Room Tuning Wizards and a real-time analyzer are all listed by the maker.
The panel carries 20 mic/line inputs in total: 12 XLR, 4 XLR/TRS combo and 2 stereo TRS, plus a talkback XLR input. Outputs total 12, including 2 main XLR, 6 aux XLR and 2 stereo aux TRS that can feed in-ear monitors. The maker lists 10 aux mixes, class-A microphone preamps and 48V phantom power switchable per channel.
Channel processing is complete on paper: 4-band parametric EQ with high and low shelving options, variable high-pass and low-pass filters, gate and compressor on every input. Main and aux outputs 1 to 6 carry a 1/3 octave graphic EQ, limiter and 4 notch filters, which is the toolset for ringing out a reflective sanctuary. Four effects engines cover reverb, echo, delay and chorus, plus a pitch correct assignable to a mono input.
Recording is a highlight: 22 tracks direct to an external hard drive with no computer, at 44.1 or 48 kHz with 32-bit floating point processing and 105 dB dynamic range. Dimensions are 58 x 360 x 291 mm (2.3 x 14.2 x 11.5 inches) and weight is 5.9 lb. The package includes a USB WiFi adapter and a soft carrying case. Note that the listing page consulted for this guide showed the model out of stock, so confirm availability before planning around it.
- Pros: wizards and presets help new operators get a working mix fast
- Pros: 22-track recording to a hard drive with no computer
- Pros: touchscreen plus touch-and-turn control on the unit itself
- Cons: 16 mic/line inputs on the panel limit larger bands
- Cons: stock status needs confirming before purchase planning
Buy it if a small church or chapel wants one compact console that guides setup and records every service. Skip it if your band needs more inputs or your venue needs a stagebox format.
Buying guide
Start with the service, not the spec sheet. Count every microphone and instrument on your biggest Sunday, add the playback and livestream feeds, then match that total against input channels, and check the aux count against the monitor mixes your band actually uses each week.
Count channels for the whole ministry
A worship band with drums, bass, two guitars, keys and three vocalists can pass 16 inputs before the pastor, a reader and a choir microphone are added. Count the full list, then leave spare channels for guests and seasonal services, because a mixer at its limit in November has no answer for a Christmas choir.
Separate the two channel numbers makers publish. Analog inputs are the sockets on the unit, such as the TF1’s 16 combo inputs or the CQ-20B’s 16 mic/line sockets. Input mixing channels are what the DSP can handle, which is how the TF1 reaches 40. Expansion paths, from the TF1’s NY64-D slot to the M32 LIVE’s AES50 networking at up to 96 inputs and outputs, decide whether a mixer grows with the church or gets replaced.
Monitor mixes for the worship band
Every singer and musician who needs a personal mix consumes an aux bus. The M32 LIVE offers 25 mix buses, the TF1 20 aux buses, and the TouchMix-16 10 aux mixes, while the XR18 and CQ-20B each provide 6 monitor outputs. Wedges share mixes more easily than in-ears, so an in-ear move usually raises the aux requirement.
Personal monitoring systems change the math. The XR18 links Behringer P-16 personal mixers over Ultranet, and the M32 LIVE does the same over its Ultranet port, letting musicians adjust their own mixes from a small station at their position. That reduces the load on the main operator during a service and can suit a volunteer team better than adding aux buses.
What digital mixers for church need for spoken word
Speech is the harder half of church sound: one voice, a reflective room and an audience that notices every missed word. Automatic mic mixing, listed on the XR18 as Dugan-style auto-mixing and on the CQ-20B as an automatic mic mixer on all inputs, manages gain across open microphones for teaching, prayer and panel segments.
Feedback control is the other half. The CQ-20B lists a Feedback Assistant with up to 16 filters per output, the TouchMix-16 lists Anti-Feedback and Room Tuning Wizards plus notch filters and graphic EQ on its outputs, and every mixer here provides per-channel EQ with high-pass filtering. In a hard-surfaced sanctuary, those tools do more for clarity than extra channels.
Recording the service
Most churches record something every week: a sermon podcast, a service archive or a full multitrack for training the team. The M32 LIVE records 32 channels to dual SD cards or over its 32×32 USB interface, the TF1 reaches 34 x 34 over USB, and the TouchMix-16 records 22 tracks to a hard drive with no computer present.
Multitrack capture also enables virtual soundcheck, where the band’s recorded tracks play back through the mixer so a volunteer can practice mixing during the week. If that training matters to your team, confirm the recording format and track count in the specification rather than assuming a USB port means multitrack; the XR18’s 18 x 18 interface and the CQ-20B’s 24 x 24 USB and SD recording both qualify.
Control surface or app control
Fader surfaces (M32 LIVE, TF1, TouchMix-16) give immediate hands-on control and a visible state of the mix, which suits a fixed booth and a team that trains together. Stagebox mixers (XR18, CQ-20B) trade faders for placement freedom: the unit sits on stage with short cable runs and the operator mixes from anywhere in the room.
App control also changes who can operate. A volunteer with a tablet can run a simple service from a pew, and personal monitor apps let musicians adjust their own mixes. The trade-off is dependence on the tablet, the battery and the WiFi link, so churches that choose a stagebox should keep a charged backup device and a wired control option in the plan.
FAQ
These answers cover the questions church media teams ask most when moving from an analog desk to a digital one: channel counts, volunteer operation, automatic mic mixing, recording and livestream feeds. Each answer rests on the published specifications of the five mixers in this guide.
How many channels do digital mixers for church use on a Sunday?
Count the largest regular service, not the average one. A small church with a worship leader, two vocalists, keys and a pastor can fit the XR18’s 18 inputs or the CQ-20B’s 20. A full band with choir microphones moves toward the TF1’s 40 input mixing channels or the M32 LIVE’s 40 input channels.
Remember that stereo playback, a livestream return and spare channels for guests all consume inputs too. Buying exactly to today’s count is the most common sizing mistake; one spare group of channels covers guest musicians, seasonal choirs and the extra microphone that appears at weddings and funerals.
Can volunteers run a digital mixer?
Yes, and the makers design for it. Yamaha lists channel presets on the TF1 created with microphone manufacturers and sound engineers, QSC lists 120 presets and setup wizards on the TouchMix-16, and the CQ-20B offers Quick Channels with one-knob processing beside its full Complete Channels mode.
Scene recall is the feature that protects a volunteer most. Once an experienced operator builds and stores a service setup, the next volunteer recalls it and starts from a known mix instead of a blank desk. The M32 LIVE stores 100 scenes and snippets, and the TF series carries Yamaha’s scene memory for the same reason.
What is automatic mic mixing?
Automatic mic mixing shares gain across several open microphones, turning down the ones nobody is speaking into. The XR18 lists Dugan-style auto-mixing for automatic microphone gain sharing, and the CQ-20B lists an automatic mic mixer on all inputs, aimed at speech applications such as conferences and debates.
In church terms, it helps panel discussions, multi-reader services, prayer meetings and question sessions, where several handheld or table microphones are open at once. It reduces background noise and feedback risk from idle microphones while keeping each speaker’s level consistent.
Do these mixers record services?
All five record, in different ways. The TouchMix-16 records 22 tracks direct to an external hard drive, the M32 LIVE records 32 channels to dual SD cards and over USB, and the TF1 records 34 x 34 channels over USB 2.0 with bundled Nuendo Live software for the computer side.
The stagebox models record too: the XR18 through its 18 x 18 USB interface, and the CQ-20B through USB and SD at 24 x 24 in 48kHz mode. For a sermon podcast, a stereo recording is enough; for team training and virtual soundcheck, choose one of the multitrack options and confirm the track count in the specification.
Which outputs feed a livestream?
A livestream feed usually comes from a spare aux or matrix mix, or from the USB interface straight into the streaming computer. The M32 LIVE’s 25 mix buses and the TF1’s 20 aux buses leave room for a dedicated broadcast mix beside the monitor mixes, which matters because a stream mix balances differently from the room.
On the smaller units, plan the outputs before purchase: the CQ-20B provides 6 monitor outputs plus an assignable Alt Out, and the XR18 provides 6 XLR aux outputs, so a livestream feed may share with a monitor mix. The TouchMix-16 lists 12 outputs including stereo aux feeds that can serve in-ear monitors or a stream.
Conclusion
For most churches, the Yamaha TF1 is the balanced pick: presets, scene memory and 20 aux buses in a movable console. Large sanctuaries should step up to the Midas M32 LIVE, small and portable churches to the XR18 or CQ-20B, and teams that want guided setup on a compact surface to the QSC TouchMix-16.