Updated Nov 16, 2026· 15 min read

Key takeaways

  • Compare five streaming mixers on mic inputs, submixes, voice effects and console capture, from the Yamaha ZG01 to the Rode Streamer X, with a full buying guide.

A Twitch stream runs game sound, voice chat, alerts and your own voice at once, and the audience hears every imbalance. This guide compares audio mixers for streaming twitch on mic inputs, submixes, voice effects and console capture, so each source stays under your fingers while you play, react and read chat.

Quick verdict

Five mixers cover the Twitch desk here, each with a different center of gravity. The Yamaha ZG01 is the game-first mixer with HDMI console inputs, the Razer Audio Mixer and BEACN Mix Create fight over PC source control, the Rode Streamer X folds video capture into the same box, and the MAONO G1 NEO covers the XLR starter desk.

Product Type Best for Key spec Main limit
Yamaha ZG01 Game streaming mixer Console and PC game streams 2 HDMI inputs, ZG SURROUND processing One microphone input only
Razer Audio Mixer 4-channel streaming mixer PC streamers with an XLR mic XLR preamp, gain -12 dB to 39.7 dB Windows and Razer Synapse required
BEACN Mix Create USB audio control surface Many app sources, two mixes Personal and audience mixes, knob paging No audio inputs of its own
Rode Streamer X Interface and capture card One-box audio plus video capture 4K30 capture, 4K60 pass-through Mixing depth lives in the UNIFY software
MAONO Maonocaster G1 NEO Gaming audio mixer First XLR streaming setup Pro-preamp, 48V phantom power, Bluetooth input Compact control set, 16-bit audio path

The pattern to see is where the mixing happens. The ZG01, Razer and G1 NEO pass real audio through the hardware, microphone included. The Mix Create controls the computer’s audio without passing a signal itself. The Streamer X sits between the camps, taking a microphone and an HDMI feed and handing the fine routing to its software.

How we selected

Every mixer below comes from a product page opened for this article, and every figure in the text is copied from one of those pages. The pages describe current models on sale now, and the picks favor gear a Twitch streamer actually routes a show through: a microphone input, separate control of game and chat, and fast mutes.

Two famous streaming names are missing on purpose. Listings opened during research mark the original TC Helicon GoXLR as discontinued, so it fails the currently sold test and stays out. In its place, the five picks cover the jobs that desk used to do: console capture, PC source control, XLR voice quality, submixes and a starter price tier, split across five current products.

The five also split by setup. Console streamers need HDMI audio, which only the ZG01 and Streamer X take in. PC streamers need application-level control, which the Razer and BEACN units approach from opposite directions. The G1 NEO covers the streamer who wants one XLR microphone, sound pads and voice effects in a single compact box. No claim of personal use appears in this guide; comments rest on the published figures and makers’ descriptions.

Audio mixers for streaming twitch in detail

Each note below follows the same pattern: who the mixer suits, the figures that matter on a live show, and the limits to weigh before buying. Channel counts, preamp figures, effects lists, capture formats and dimensions all come straight from the opened product pages behind this guide.

Yamaha ZG01

The ZG01 is Yamaha’s game streaming mixer, built to balance three things at once: game audio, your voice and the voice of the person you are talking with. One combo microphone input with +48 V phantom power covers a condenser or dynamic mic, and a 3.5 mm headset mic input covers a gaming headset instead.

Console support sets it apart. Two HDMI inputs switch between sources at a button press, with audio out fixed at 2 channels, 24-bit and 48 kHz, and the video signal passed through; the maker is clear that the unit has no video capture function, so a capture card still handles the picture. A 4-pole TRRS connection brings a smartphone into the mix for chat apps. On the computer side, a dedicated driver presents the ZG01 to Windows and Mac as two virtual devices, Voice and Streaming, so a chat app can take only your voice while the streaming app takes game and chat together.

DSP processing is game-flavored: ZG SURROUND builds a surround effect for stereo headphones, FOCUS MODE and EQ shape game sound, 3D CHAT SPACE places the other party’s voice in a virtual 3D space, and six effect preset buttons split between three voice chat effects (voice changer, transceiver and radio voices, 1-touch echo) and three game sound effects. The unit runs on USB-C power at 5 V DC and 1.5 A, draws a maximum of 7.5 W, measures 195 x 47.5 x 110 mm and weighs 0.8 kg. The limit is input count: one voice at a time, so co-hosted desk shows belong to other mixers.

  • Pros: HDMI console audio with switching; two virtual USB devices for chat and stream; surround and focus processing for game sound.
  • Cons: single microphone input; no video capture built in; effects lean toward games rather than music content.

Buy if: you stream console or PC games and want game, chat and voice balanced on hardware knobs. Skip if: two people share your desk microphone setup, where a multi-preamp console fits better.

Razer Audio Mixer

The Razer Audio Mixer is a 4-channel interface for PC streaming: one direct line out for your mic and three further channels assigned through Razer Synapse, typically game, music or chat, and system volumes. Four slide faders with mute buttons run the mix, and the maker notes the unit is completely hardware-controlled once configured.

The microphone path is the headline. A hybrid XLR and 6.35 mm port carries a preamp the maker describes as ultra-clean and low-noise, with adjustable gain from -12 dB to 39.7 dB at 0.75 dB per step, plus a dedicated 48 V phantom power button for condenser mics. Synapse holds the deeper mic settings: EQ, compressor and noise gate, plus stream mix and playback mix adjustments beyond the four faders. Voice tools include a voice changer with presets such as Monster and High Pitch, echo and reverb environments, a key shifter and vocal fading.

Connections cover the streaming desk: 3.5 mm line in and line out, a 3.5 mm microphone in, an optical input and USB-C. A bleep button censors the mic on the fly, and holding a mute button calls up the voice modification settings. Chroma RGB lighting shows volume levels and mute states and can react to the audience through the Streamer Companion App. The hard limits are platform and inputs: Synapse and Windows 10 or above are required, USB microphones do not plug into it, and there is one XLR input, so this is a solo streamer desk.

  • Pros: real XLR preamp with fine gain steps; hardware faders after setup; bleep button and voice changer for live moments.
  • Cons: Windows only through Synapse; no USB mic support; single microphone input.

Buy if: you stream from a Windows PC with an XLR microphone and want game, chat and music on separate faders. Skip if: you stream from a console or a Mac, where the ZG01 or Streamer X route signals more naturally.

BEACN Mix Create

The Mix Create takes a different job from the other four: it passes no audio at all. It is a USB-C control surface, 174 x 90 x 100 mm, with four infinite scroll knobs and a 5 inch LCD screen at 800 x 480, and it commands the audio devices and applications on the connected computer through the BEACN App.

Its defining feature is two completely independent mixes: a personal mix for your headphones and an audience mix for the stream, adjusted separately with a button press to switch between them. Applications are dragged onto knobs in the app, and knob paging reaches further channels beyond the four physical knobs. A routing table with mute modes decides where each source goes, and a VOD output exists so music can reach the live audience while staying out of the recorded video track, which the maker frames as DMCA compliance support on Twitch and other platforms.

Profiles save whole setups for streaming, calls and recording, and the unit switches between two assigned listening devices. The maker is direct about the trade: there are no XLR or other inputs and outputs, by design, so your microphone still needs its own interface or USB connection, which the Mix Create then controls like any other source. It runs on Windows 10 or later and macOS 12 or later. Streamers with a good interface already in place gain the most here; streamers starting from zero still need that interface first.

  • Pros: separate personal and audience mixes; unlimited app channels through paging; VOD output for music handling; works on Windows and Mac.
  • Cons: no microphone input or audio path of its own; depends on the BEACN App; adds a second device to the desk.

Buy if: your interface is sorted and what you lack is fast, physical control of many app sources and two mixes. Skip if: you need one box that takes a microphone, where the Razer or G1 NEO start the chain properly.

Rode Streamer X

The Streamer X folds three devices into one: a professional audio interface, a video capture card and a control surface. For a Twitch desk that usually means a console or camera feed and a microphone through a single USB connection, with dual USB-C interfaces also accommodating dual PC setups.

Video comes over HDMI at up to 4K30 capture with 4K60 pass-through and Variable Refresh Rate support, so gameplay reaches the monitor at full rate while the stream takes the captured feed. Audio starts at a Neutrik combo jack with the maker’s ultra-low-noise, high-gain Revolution Preamp, joined by a 3.5 mm TRRS headset input, an integrated wireless receiver for RODE Series IV microphones such as the Wireless GO II and Wireless ME, and a 1/4-inch headphone output. Internal DSP powered by APHEX processes the voice on the unit itself.

Four fully customisable SMART pads trigger sounds, voice effects and MIDI commands, with up to 64 accessible through bank switching, and the free UNIFY software handles advanced audio routing, mixing and configuration across all inputs at once. Dedicated controls cover mic and headphone levels, with large audio and video mute buttons for the moments a stream needs silence fast. The compromise is depth on the surface: the box keeps physical controls simple, so detailed mixing lives in software rather than on faders.

  • Pros: capture card and interface in one box; Revolution Preamp for the voice; wireless mic receiver built in; dual USB-C for two-PC shows.
  • Cons: one XLR input; detailed routing needs the UNIFY software; no multi-source fader bank on the surface.

Buy if: you want console or camera capture and a strong microphone channel from a single compact unit. Skip if: your show mixes many live sources on hardware faders, where the Razer unit or a production console fits better.

MAONO Maonocaster G1 NEO

The G1 NEO is the starter desk of this group: a compact gaming audio mixer with an XLR microphone input, a built-in Pro-preamp and 48 V phantom power for condenser microphones. The listing spec table counts 4 channels, at 550 g and 6.29 x 2 x 5.19 inches, with USB-C to the computer.

Streaming features fill the surface. One-click noise reduction cleans the voice for teammates and viewers, a voice change feature offers female, male, baby and robot voices, and custom sound pads store your own voice tags and effects. Reverb and a sidechain feature support singing segments, and a Bluetooth accompaniment input plus an AUX input bring phone music into the show. One-click mute, loopback and direct monitoring sit on dedicated controls, and RGB lighting offers 12 color variations across the buttons and body light strips.

The maker’s compatibility list names the software streamers live in: OBS Studio, Discord, Twitch, TikTok, YouTube, Facebook, Streamlabs, Streamyard and Zoom, across phones, computers and tablets. The limits match the tier: the control set is compact, the audio path is a 16-bit design per the maker’s manual, and one microphone input means one voice. As a first XLR desk for a new channel, though, it covers the whole checklist in one box.

  • Pros: XLR input with preamp and phantom power at a starter tier; sound pads, voice changer and Bluetooth input built in; direct monitor and loopback on buttons.
  • Cons: single microphone input; compact controls; 16-bit audio path per the maker manual.

Buy if: you are setting up a first streaming desk around one XLR microphone. Skip if: your show already runs several sources and needs per-app faders or a second mix, where the Razer and BEACN units take over.

Buying guide

Streaming mixers look similar on a shelf and behave very differently on a live show. The checks below follow the order a Twitch setup actually grows: the microphone first, then source control, then the second mix, then capture and platform fit. Read them in order and most desks narrow to one or two of the five mixers above.

Start with the microphone you already own

An XLR microphone needs a preamp in the mixer: the Razer offers gain from -12 dB to 39.7 dB, the Streamer X carries a Revolution Preamp, the G1 NEO a Pro-preamp, and the ZG01 a combo input, each with 48 V phantom power for condenser models. A USB microphone skips all of that and plugs into the computer, which rules the Razer unit out.

Headset users sit in a third camp. The ZG01 and Streamer X both take a headset directly, through a 3.5 mm headset mic input and a TRRS jack. Match the mixer to the mic on your desk today, not the one in a future upgrade list, because the input decides which of these five can anchor your setup at all.

Count your sources, then choose faders, knobs or software

A Twitch desk runs four sources: voice, game, chat and music or alerts. The Razer puts exactly those four on slide faders. The ZG01 balances voice, chat and game on its own controls with two virtual USB devices behind them. The Mix Create pages unlimited applications across four knobs, which suits desks with browsers, calls and media players.

The Streamer X and G1 NEO keep the surface small and push grouping into software or fixed controls. None of these is wrong; the question is how often you ride levels mid-game. If your hand reaches for a fader every few minutes, buy the surface with the faders. If you set levels once per show, software control costs you nothing.

Decide whether the audience mix and your mix must differ in audio mixers for streaming twitch

Two-mix control is the feature streamers feel most. The Mix Create builds its whole design on independent personal and audience mixes. The ZG01 sends different combinations to chat and stream through its Voice and Streaming devices. Music ties in too, since a VOD output can keep music audible live and absent from recordings.

If you play alone and listen to exactly what the audience hears, a single mix is simpler and the Razer or G1 NEO pattern is enough. The moment a co-host, a loud game or licensed music enters the show, separate mixes stop being a luxury and start being the fix for problems you currently solve by alt-tabbing.

Check capture and platform fit before you buy

Console streamers need the game into the computer somehow. The Streamer X captures HDMI itself at up to 4K30 with 4K60 pass-through. The ZG01 takes HDMI audio and passes video through but captures nothing, so it pairs with a separate capture card. PC-only streamers can ignore HDMI entirely and spend on control instead.

Platform checks are just as concrete. The Razer requires Windows 10 or later and Razer Synapse. The Mix Create runs on Windows 10 or later and macOS 12 or later. The ZG01 works with Windows and Mac through its driver. Read your own operating system off this list before falling for a feature set your computer cannot run.

FAQ

New streamers ask the same questions when a mixer joins the desk: whether a USB mic works, what a submix buys you, whether capture is included, and how voice effects fit in. The answers below use the figures published for the five mixers in this guide.

Can I use a USB microphone with these mixers?

Mostly no, and the makers say so. The Razer Audio Mixer is built for XLR microphones and does not take a USB mic as an input. The ZG01, Streamer X and G1 NEO likewise take analog microphones: XLR, headset or TRRS connections. A USB mic connects to the computer itself, not to the desk.

The exception is control rather than input. The Mix Create commands any audio device the computer can access, USB microphones included, because it routes application and device levels in software. The Streamer X also accepts certain RODE USB microphones as an additional input. If your USB mic is your voice for the next year, plan around software control.

What does a personal mix versus an audience mix actually change?

It changes what you hear without changing what viewers hear. With two independent mixes, game audio can sit loud in your headphones while the audience gets it lower under your voice, and chat can sit where each side prefers. The Mix Create switches between the two mixes with a button, and its routing table decides which sources feed each one.

The ZG01 reaches a similar place by splitting outputs: a Voice device carries only your microphone to chat software, while the Streaming device carries game and chat to the broadcast. Single-mix desks like the G1 NEO send one balance everywhere, which is fine until your monitoring needs and your audience needs pull apart.

Do any of these mixers capture video for the stream?

One does. The Streamer X is a capture card as well as an interface, taking HDMI at up to 4K30 for capture with 4K60 pass-through to the monitor and Variable Refresh Rate support. That removes a separate capture device from a console or camera setup entirely.

The ZG01 is the common confusion: it has two HDMI inputs and one output, extracts and mixes the audio, and passes the video through, but the maker states it has no video capture function. The Razer, BEACN and MAONO units are audio-only. If your console picture already reaches the PC through a capture card you own, audio-only mixers remain fully in play.

Are voice changers and sound pads a gimmick?

They are production tools, not just comedy bits. On the ZG01, three voice preset buttons cover voice changer, transceiver and radio effects; the Razer holds voice modification behind its mute buttons with presets like Monster and High Pitch; the G1 NEO offers female, male, baby and robot voices; the Streamer X pads trigger voice effects.

Used once a stream, they mark moments: a character voice for a game segment, a radio effect for a flight sim, a sound tag for a regular segment. The mixers that treat them as buttons rather than menu dives, which is most of this group, make them practical mid-show rather than a setup chore.

Conclusion

Choose by desk: the ZG01 for console and game-first streams, the Razer for XLR fader control on Windows, the Mix Create for two mixes and many apps, the Streamer X when capture joins the box, and the G1 NEO for a first XLR setup that covers the basics in one compact unit. Match the box to the sources on your desk.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.