Key takeaways
- Compare the specs behind prices for DJ mixers: six current models from Pioneer DJ, Allen and Heath, Rane, Numark and Reloop, with channels, FX and USB compared.
Shopping by prices for dj mixers alone hides what the hardware actually does, so this guide compares six current DJ mixers on the specifications that shape a set: channel counts, EQ style, effects engines, crossfaders, USB audio and DVS support, all taken from maker and dealer product pages opened for this guide.
Quick verdict
Two of the six are four-channel club mixers with opposite philosophies, two are two-channel battle mixers built around Serato, one is an analogue six-channel design with dual filters, and one is a compact digital club mixer built for djay. The table below lines up the headline specifications side by side.
| Model | Channels | Crossfader | Effects | USB audio | Software |
|---|---|---|---|---|---|
| Pioneer DJ DJM-A9 | 4 | Third-generation MAGVEL FADER | 14 Beat FX, 6 Sound Color FX | Dual USB-B and USB-C, 96 kHz | rekordbox, Serato DJ Pro |
| Allen & Heath Xone:96 | 6 + 2 analogue | InnoFADER Mini | Dual VCF filters with Crunch | Dual 24-channel, 32-bit/96 kHz | Traktor Scratch Pro 2 DVS |
| Pioneer DJ DJM-S11 | 2, 4-deck control | MAGVEL FADER PRO | 22 Beat FX, Smooth Echo | Dual USB-B, 24-bit/48 kHz | Serato DJ Pro, rekordbox |
| Rane Seventy | 2 | MAG FOUR contactless | 6 FLEX FX engines | Dual USB for handoffs | Serato DJ Pro |
| Reloop RMX-95 | 4 + 1 | Adjustable curve, innoFADER compatible | 13 Beat FX with FX frequency control | Dual 10-in/10-out USB 2.0, 24-bit | djay Pro AI |
| Numark Scratch | 2 | InnoFADER | 6 software FX selectors, hardware filters | USB 2.0, 24-bit/48 kHz | Serato DJ Pro with DVS included |
For a club booth that hosts visiting DJs on mixed setups, the DJM-A9 and the Xone:96 cover the widest range of sources, one digital and one analogue. For scratch routines, the DJM-S11 and the Seventy put the deepest performance controls under the hands. The RMX-95 suits laptop and tablet DJs who want a full club layout, and the Scratch keeps the battle feature set in the smallest footprint here.
How we selected these DJ mixers
Each model below is a current DJ mixer whose maker or dealer product page was opened and read in full for this guide, and every specification quoted comes from that page. The six were chosen to span the main DJ mixer families: club four-channel, analogue multi-channel, battle two-channel and digital club designs.
Because this keyword is about comparing what listings represent, the comparison sticks to verifiable hardware facts: channel counts, EQ layout, converter resolution and sample rates, effects lists, crossfader types, USB audio channel counts and stated software support. Where a page does not state a figure, the gap is named instead of filled in, and no model is described with a specification its page does not carry.
Six DJ mixers compared in detail
The six sections below follow the same order as the table: the two big club designs first, then the two battle mixers, then the digital club mixer and the compact scratch model. Each section names who the mixer suits, the specifications that matter, and the limits the page itself reveals.
Pioneer DJ DJM-A9
The DJM-A9 is Pioneer DJ’s four-channel club mixer, built around ESS Technology 32-bit converters on its channel inputs and master, booth, record and send outputs, running at a 96 kHz sampling rate. It is the natural pick for club booths and touring DJs who move between rekordbox and Serato rigs in the same week.
Each of the four channels carries a switchable 3-band EQ or isolator with a -26 dB to +6 dB range, and the input section offers four digital coaxial, four line RCA and four phono RCA inputs, so media players and turntables can stay patched together. Two microphone inputs take XLR and jack connections, with phantom power, a 2-band mic EQ and four mic effects: Echo, Pitch, Megaphone and Reverb. The maker lists line signal-to-noise at 105 dB and line distortion below 0.005 percent.
The effects story is two-layered. Six Sound Color FX (Space, Dub Echo, Sweep, Noise, Crush and Filter) sit on the channel knobs, with a Center Lock feature that stops the knob at its center position, and 14 Beat FX run from a color display with an X-Pad, including the newer Mobius, Triplet Filter and Triplet Roll. A third-generation MAGVEL FADER handles crossfading, a send and return loop plus a USB Type-A Multi I/O section route external effects units, and a Bluetooth 5.0 input can be assigned to any channel for phone playback. Dual USB Type-B and dual USB Type-C ports let two computers connect at once for back-to-back sets, dual headphone outputs have separate cue and mix controls, and the booth output has its own 2-band EQ. The mixer measures 407.4 x 458.3 x 107.9 mm and weighs 10.2 kg.
- Pros: 32-bit conversion at 96 kHz; dual-computer USB in both connector types; Bluetooth input on any channel; two full headphone cue systems.
- Cons: the largest and heaviest mixer in this group at 10.2 kg; Serato DJ Pro needs its own license or subscription per the maker page.
- Buy if: you run a club booth or headline slots where guest DJs swap laptops and formats all night.
- Skip if: your sets are two-deck scratch routines, where the battle mixers below put more controls in reach.
Allen & Heath Xone:96
The Xone:96 is the analogue entry in this group: a 6 + 2 channel mixer whose four main stereo channels carry 4-band EQ, while the two stereo return channels use a 3-band parametric EQ design. It suits DJs who build hybrid rigs from turntables, laptops, synths and drum machines and mix with filters rather than effect units.
Its signature is the pair of Xone:VCF filters. Each offers high-pass, band-pass and low-pass modes with adjustable frequency and resonance, any of the six main channels can be routed to either filter, and a Crunch control adds controlled harmonic distortion before the filter stage. There are no built-in beat effects at all; instead, two dedicated FX sends (the first switchable between line and Hi-Z level for guitar pedals), four stereo returns and a separate master insert connect outboard hardware.
The digital side is a dual USB soundcard arrangement: two independent USB connections, each moving 24 channels (12 in and 12 out) at 32-bit and 96 kHz, with MIDI over USB, and the soundcard supports DVS control of Traktor Scratch Pro 2 out of the box. Inputs include four line and four phono RCA pairs with a line/phono switch for DVS, two XLR microphone inputs, and outputs run to balanced XLR master, balanced booth with its own 3-band EQ, and a record output. Two independent headphone cue systems support back-to-back sets, the channel faders are 60 mm VCA units, the crossfader is a 45 mm InnoFADER Mini with cut adjustment, headroom is 20 dB, and the mixer measures 336 x 410 x 109 mm at 7 kg.
- Pros: true analogue signal path with dual assignable VCF filters; two full 24-channel USB soundcards; deep send and return routing for outboard gear.
- Cons: no built-in beat effects, so echo and reverb mean extra hardware; the opened page lists no signal-to-noise figure.
- Buy if: you mix long blends on four-band EQ and filters, and your effects live in pedals and rack units.
- Skip if: you want a single box with internal effects and pads for Serato routines.
Pioneer DJ DJM-S11
The DJM-S11 is a two-channel battle mixer with four-deck control, a 4.3-inch touch screen and the deepest effects count in this group: 22 Beat FX, including Fader Pitch and Helix, plus a Smooth Echo that fires automatically from assigned faders or pads. It fits turntablists and open-format DJs who perform with Serato DJ Pro or rekordbox.
Channels carry 3-band EQ that switches to isolator mode, with ranges of -26 dB to +6 dB as EQ and full cut to +6 dB as isolators, channel reverse and a peak limiter. The MAGVEL FADER PRO crossfader has curve assignment, reverse and a feeling adjustment, and the maker states its vertical rigidity is boosted by 30 percent over the earlier design. Eight performance pads drive modes such as Combo Pad and Scratch Bank in Serato, the touch screen adds Touch FX and Touch MIDI control of software functions, and Deck 3/4 control lets two extra software decks play through the two channel strips.
Audio runs through a 24-bit, 48 kHz USB sound card with 64-bit mixing and dithering in the DSP and a 32-bit D/A converter on the master output. The maker lists signal-to-noise at 115 dB on USB, 105 dB on line and 90 dB on phono. Inputs are two line and two phono RCA pairs, one microphone input on an XLR and jack combo, and one RCA aux, with master outputs on XLR and RCA, a booth output and two headphone sockets. Dual USB-A hub ports and dual USB-B ports cover controllers and two laptops, the mixer unlocks Serato DJ Pro and Serato DVS, rekordbox Performance mode unlocks free with DVS on separate control vinyl, and a Serato Pitch ‘n Time DJ expansion pack is included. It measures 10.51 x 17.8 x 4.25 inches and weighs 11.46 lb.
- Pros: 22 hardware Beat FX plus software effects access; touch screen with waveform and Touch FX; four-deck control from two channel strips.
- Cons: only two physical channels and a single microphone input; rekordbox DVS control vinyl is a separate purchase per the maker page.
- Buy if: battles, routines and mashup sets are your main work and you live in Serato or rekordbox.
- Skip if: you regularly mix three or four hardware sources at once.
Rane Seventy
The Seventy is Rane’s two-channel battle mixer for Serato DJ, built in a solid steel chassis with a front guard handle. Its headline hardware is a set of three contactless MAG FOUR faders, which the maker describes as 50 percent lighter than their predecessors, with an external tension-adjust control for the crossfader.
Performance controls are dense. Six dual post-fader internal FLEX FX engines are selected from radio-style buttons that also reach Serato DJ software effects, and two diecast aluminum FX paddles rotate 180 degrees to trigger them. Sixteen Akai Professional MPC pads carry independent mode controls per deck, covering Hot Cue, Pitch ‘n Time, Saved Loops, Sampler, Roll and Transport, and dedicated loop controls sit alongside Instant Double buttons that can toggle Sync or Silent Cue modes.
Two DJs can perform and hand over through the dual USB connections, assignable USB controller inputs form a hub for Rane Twelve motorized controllers, and there are two microphone inputs for hosts or a second performer. The maker lists an industry-leading signal-to-noise figure of 114 dB. The product page opened for this guide does not publish the channel EQ layout, the full terminal list or the converter figures, so those details are left to the maker’s specification sheet rather than guessed here.
- Pros: three contactless MAG FOUR faders with external tension adjustment; 16 MPC pads with per-deck modes; dual USB handoffs and a Twelve controller hub.
- Cons: the opened page leaves EQ type, terminal counts and dimensions unstated; the design centers on Serato DJ only.
- Buy if: scratch technique is the priority and your routine already runs on Serato DJ Pro.
- Skip if: you need published converter specifications or support for several DJ applications.
Reloop RMX-95
The RMX-95 is a 4+1 channel digital club mixer built around Algoriddim djay Pro AI, which it runs by plug and play, including the Neural Mix feature that separates beats, melodies and vocals in real time and DVS support across Mac, PC, iPhone and iPad. It suits DJs who perform from laptops or tablets and want a full club layout.
Each channel has a 3-band EQ whose behavior switches between classic and kill modes, plus a bi-polar filter with low-pass and high-pass shapes and realtime resonance control. The Beat FX unit carries 13 effects, among them Echo, Reverb, Flanger, Phaser, Vinyl Brake, Loop Roll, Noise, Pitch Shift, Delay, Ping Pong Delay, Tape Delay, Bit Crusher and Transformer, and a dedicated FX frequency control applies the effect to a chosen frequency band only. Two digital displays report parameter changes as you work.
The dual USB 2.0 interface moves ten inputs and ten outputs at 24-bit quality, the two high-retention USB ports allow smooth changeovers between DJs, and an active USB hub connects accessories. Every control can be MIDI mapped, and a setup menu adjusts EQ frequency ranges, a Neural Mix EQ mode, interface routing and booth zone routing. Analogue inputs cover four CD, two line and two phono sources, a separate microphone channel takes two microphones plus an aux input, and outputs include balanced XLR master, booth on jacks in stereo or mono, a record output that ignores the master level, and two headphone jacks with split cue. The metal housing uses bolted metal shafts, fader curves are adjustable, and the crossfader can be upgraded to the contactless RMX innoFADER.
- Pros: dual 10-in/10-out USB interface with an active hub; 13 built-in effects with frequency-band control; full MIDI mapping of every control.
- Cons: no Serato or rekordbox support is stated on the page; the stock crossfader is not the contactless innoFADER, which is an upgrade.
- Buy if: djay Pro AI on a laptop, phone or tablet is your platform and you want club-style hardware around it.
- Skip if: your sets depend on Serato DJ Pro or rekordbox DVS.
Numark Scratch
The Scratch is Numark’s two-channel, 24-bit battle mixer for Serato DJ Pro, and it is the only model here that bundles the full Serato DJ Pro license and the complete DVS Expansion Pack in the box. It fits DJs starting a DVS rig or running a compact second setup who still want a proper scratch crossfader.
That crossfader is a built-in InnoFADER with reverse and slope controls. Around it sit eight performance pads, four per deck, for hot cues, rolls and samples, an instant loop encoder with dedicated looping knobs per channel, and six direct-access software FX selectors fired by dual paddle triggers with a dry/wet control. Unusually at this size, the low-pass and high-pass filter knobs are hardware, not software-dependent, so they work with plain analogue turntables too.
Conversion runs at 24-bit and 48 kHz with a 32-bit fixed-point DSP over USB 2.0. The maker lists the balanced XLR master output at 108 dB signal-to-noise (A-weighted, at maximum output) with a +20 dBu maximum level, the RCA booth output at 107 dB, and the dual headphone outputs, on 1/4-inch and 1/8-inch sockets, at 115 mW RMS per channel into 32 ohms. Inputs are phono and line RCA pairs plus a combo microphone input on XLR or 1/4-inch with level and tone controls. The chassis is all metal, and the box also carries a Prime Loop Sound Pack and a two-month SoundSwitch lighting software subscription.
- Pros: Serato DJ Pro and the DVS Expansion Pack are included, not unlocked later; InnoFADER crossfader fitted as standard; hardware filters work without a computer.
- Cons: effects are software-based apart from the filters; a single microphone input and two channels limit hosting and guest setups.
- Buy if: you are building a first DVS battle rig and want the software bundle settled on day one.
- Skip if: you need hardware effects, four channels or dual-computer changeovers.
Buying guide
Specifications explain most of the spread between DJ mixer listings, because the hardware content changes step by step: converter quality, channel counts, effects engines, fader mechanisms and USB audio all add engineering. Reading a listing as a specification sheet first makes the comparison honest, whatever figure sits next to it.
How to read prices for DJ mixers as specification tiers
Group the six mixers here by what is inside them. The first group is two-channel battle hardware, where the engineering concentrates on faders, pads and software integration: the DJM-S11, Seventy and Scratch share that brief with different depths of effects and displays.
The second group is club hardware, where channels, routing and converter counts grow: the DJM-A9 adds dual-computer USB and Bluetooth, the Xone:96 doubles the USB soundcard and the filter count, and the RMX-95 spreads a dual interface across four channels plus a mic channel. Listings rise as those hardware counts rise, so compare within a group before comparing across groups.
What moves prices for DJ mixers up a tier
Four specification families do most of the moving. Converter specification is the first: the DJM-A9 runs 32-bit conversion at 96 kHz and the Xone:96 runs dual 32-bit, 96 kHz soundcards, while the battle mixers here run 24-bit, 48 kHz designs that fit their software-first brief.
Effects engines are the second family: 22 hardware Beat FX on the DJM-S11, 14 plus six color effects on the DJM-A9, 13 on the RMX-95, six FLEX FX engines on the Seventy, software effects on the Scratch, and none at all on the Xone:96, which expects outboard units. Fader mechanisms form the third family, from contactless MAG FOUR and MAGVEL designs to InnoFADER units. USB audio is the fourth: dual full interfaces on the club mixers versus single or handoff-focused connections on the battle pair.
Count the channels and sources you actually patch
Channel count only matters against your real source list. Two turntables and a laptop need two channels with phono and line inputs plus DVS, which every battle mixer here covers. A hybrid rig with two media players, two turntables and a drum machine needs the Xone:96’s six channels or the DJM-A9’s four channels with digital inputs.
Count microphones the same way. A single host mic is covered everywhere here; two microphones rule out the DJM-S11 and the Scratch, which carry one mic input each, and point to the DJM-A9, Xone:96, Seventy or RMX-95. Booth outputs, record outputs and second headphone cue systems matter for clubs and back-to-back sets, and they cluster on the larger models.
Match the mixer to your DJ software first
Software support divides this group cleanly. Serato DJ Pro is the home platform for the DJM-S11, the Seventy and the Scratch, and the DJM-A9 also supports it beside rekordbox. Traktor Scratch Pro 2 DVS is the Xone:96’s stated route, and djay Pro AI is the RMX-95’s platform, with no Serato or rekordbox support stated on its page.
Check what the box settles, too. The Scratch includes the full Serato DJ Pro license and DVS Expansion Pack, the DJM-S11 unlocks Serato DJ Pro and includes a Pitch ‘n Time DJ expansion, while its rekordbox DVS vinyl is separate, and the DJM-A9’s Serato use needs a license or subscription per the maker page. Those bundle differences change what a complete rig requires beyond the mixer itself.
Faders and build decide how long the mixer stays tight
Scratch DJs wear crossfaders first, so mechanism type matters: contactless designs such as Rane’s MAG FOUR and Pioneer’s MAGVEL FADER lines remove the contact strip that wears, and the Xone:96 and Scratch use InnoFADER units with scratch reputations. The RMX-95 takes another route, with adjustable curves now and an innoFADER upgrade path later.
Build shows in the details the pages state: the Seventy’s solid steel chassis and guard handle, the Scratch’s all-metal build, the RMX-95’s metal housing with bolted shafts, and replaceable faders on the Xone:96. For a mixer that travels weekly, those construction notes and a replaceable crossfader matter more than one extra effect.
FAQ
These answers cover the specification questions that come up when comparing DJ mixer listings: why channel format changes the hardware content, what dual USB connections do, how converter figures compare, and which bundle contents change what else a rig needs.
Why do prices for DJ mixers differ between two-channel and four-channel models?
Because the hardware content differs. A four-channel club mixer carries four full channel strips with EQ, more input pairs, often a second USB soundcard and more output options, as the DJM-A9 and RMX-95 show. A two-channel battle mixer spends its engineering on faders, pads and effects instead, as the DJM-S11 and Seventy show.
Neither layout is a lesser version of the other. The DJM-S11 carries 22 hardware effects and a touch screen that the four-channel RMX-95 does not match, while the RMX-95 carries twice the channel count. Compare listings inside the format you actually play, and the specification differences explain most of the spread.
What do dual USB connections on a DJ mixer actually do?
They let two computers connect at the same time. On the DJM-A9, dual USB Type-B and USB Type-C ports mean two DJs can stay plugged in for back-to-back sets and changeovers. On the Seventy, dual USB connections serve the same handoff purpose between two Serato laptops.
On the Xone:96 the second connection goes further: each USB port carries its own 24-channel soundcard, so two laptops get full audio interfaces, not just control. The RMX-95 uses its dual ports for transitions and adds an active hub for controllers. When you read a listing, check whether dual USB means handoff only or a complete second interface.
Is 32-bit, 96 kHz conversion worth choosing over 24-bit, 48 kHz?
It depends on the rest of the chain. The DJM-A9 and Xone:96 publish 32-bit conversion at 96 kHz, and their makers pair it with high signal-to-noise figures, 105 dB line on the DJM-A9. The battle mixers publish 24-bit, 48 kHz sound cards, and the DJM-S11 still lists 115 dB signal-to-noise on USB, the highest figure in this group.
Converter numbers describe the digital path only. Club systems with long cable runs and big amplifiers reveal small differences more than a bedroom setup does, and DVS control works identically at either rate in these designs. Treat the figure as one line in the specification sheet, next to noise figures and output levels, rather than a verdict on its own.
Which DJ mixers here include their DJ software?
The Numark Scratch goes furthest: the full Serato DJ Pro license and the complete DVS Expansion Pack are in the box. The DJM-S11 unlocks Serato DJ Pro and Serato DVS, unlocks rekordbox Performance mode free, and includes a Serato Pitch ‘n Time DJ expansion pack, though rekordbox DVS control vinyl is separate.
The DJM-A9 supports rekordbox and Serato DJ Pro, with Serato needing a license or subscription per the maker page. The Xone:96 supports Traktor Scratch Pro 2 DVS control out of the box, and the RMX-95 works with djay Pro AI by plug and play. Always match the bundle to the application you already use, since a mixer rarely changes a DJ’s library habits.
Do any of these mixers work without a computer?
Yes. The Xone:96 is an analogue mixer, so its channels, filters and sends all work with turntables, media players and outboard gear alone, and its USB soundcards are an addition, not a requirement. The Numark Scratch keeps its low-pass and high-pass filters in hardware, and its phono and line inputs mix analogue sources directly.
The DJM-A9 also mixes its analogue and digital inputs without a laptop, with Bluetooth as another source. The RMX-95, DJM-S11 and Seventy lean harder on their software platforms for effects, pads and library control, so their standalone depth is thinner even though their channel strips still pass audio. If vinyl-only nights are part of your work, weight the analogue path more heavily.
Conclusion
Read as specification sheets, these six mixers sort themselves: the DJM-A9 and Xone:96 anchor club booths, the DJM-S11 and Seventy serve scratch performance, the RMX-95 wraps djay in club hardware, and the Scratch bundles a complete Serato DVS start. Match channels, software and faders to your sets, and the right model follows.