Updated Nov 15, 2026· 15 min read

Key takeaways

  • Compare prices for kitchen sinks the spec way: gauge, material, bowl size, mount type and included parts across six verified sinks, with no invented figures.

Comparing sinks by a listing figure alone hides what the money buys: thinner steel, a bare bowl, or a kit with grids and boards in the box. This guide compares prices for kitchen sinks through the specs that carry real weight, namely gauge, material, bowl size, mount type and included parts, across six verified models.

Quick verdict

On specs alone, the Delta Lorelai 32 inch workstation and the IAK 33 inch double bowl give the fullest parts lists in this group, the Elkay Quartz Classic gives the only quartz body, and the two Elkay Crosstown kits show how the same footprint changes with depth, ledge and box contents.

Read the group as three tiers of specification rather than three tiers of cost. The first tier is the workstation kits, where a ledge, cutting board, roll-up rack, grid and drain assembly are all listed in the box. The second tier is the double bowl steel sinks, where bowl split and divider height do the work. The third tier is the plainer dual mount kit, where the box holds a sink and a grid and the specification is simpler in every field.

Cabinet size is the one figure that repeats across the list: every model here with a stated figure lists a minimum cabinet of 36 inches. Bowl depth runs from 9 inches to 10 inches, steel gauge splits between 16 and 18 where the maker states a gauge, and one model, the Kraus 60/40 double bowl, states neither its bowl dimensions nor a cabinet figure on the page opened for this guide, which is itself a useful comparison point.

Product Type Best for Key spec Main limit
IAK ZJJ102510 Undermount workstation, double bowl Full kit in a dark finish Bowls 15 x 15.82 inches each Gunmetal finish only as listed
Elkay Crosstown ECTSR33229T1WS Dual mount workstation kit, single bowl Ledge work over one bowl Bowl 30-1/2 x 17 x 9 inches 18 gauge steel
Kraus KHU103-33 Undermount, 60/40 double bowl Uneven split for mixed loads 32.75 x 19 x 10.25 inches Page states no bowl dimensions
Delta Lorelai 95B932-32S-SS Undermount workstation, single bowl Complete board and rack kit Bowl 30 x 16 x 9 inches Undermount only
Elkay Quartz Classic Aqua Divide Undermount quartz, double bowl Color choice in a molded body Bowls 15.17 x 16.77 x 10 inches No parts kit listed
Elkay Crosstown ECTSRS33229T Dual mount kit, single bowl Simple kit, four faucet holes Bowl 30-1/2 x 16.75 x 9 inches Grid is the only listed part

How we selected

Selection for a price-led keyword has to be stricter, not looser, because the temptation is to rank by a figure that changes weekly. Every sink here was read on its maker page or a full listing page, and only the fields on that page, such as gauge, dimensions, mount and box contents, are compared in this article.

Six models cover the spread a buyer actually meets: two workstation kits with ledges and boards, two divided steel bowls with different splits, one molded quartz double bowl with a low divider, and one plain dual mount kit whose box holds a grid and little else. Materials run from 16 gauge and 18 gauge stainless steel to molded quartz, mounts run from undermount only to dual mount, and parts lists run from a single grid to a full workstation set. That spread is what makes a spec comparison honest: the differences are visible in the fields, not hidden behind a changing figure.

Best prices for kitchen sinks, model by model

The six models below are ordered by specification weight, from the fullest kits toward the plainest box, so the pattern is easy to follow. Each entry states the material, gauge where the maker gives one, the overall and bowl dimensions, the mount, the cabinet figure and exactly what the maker lists in the box.

IAK ZJJ102510 gunmetal black workstation sink

The listing page for the IAK ZJJ102510 describes a 33 inch undermount workstation sink in a gunmetal black finish, built from 16 gauge T-304 grade stainless steel with a nano outer layer. Exterior dimensions are listed at 33 by 19 by 10 inches, and the minimum recommended cabinet size is listed at 36 inches.

The layout is a 50/50 double bowl with a low divider, and each bowl is listed at 15 by 15.82 inches. The recommended cutout is listed at 31 by 17 inches and the drain opening at the standard 3-1/2 inches. An X-shaped water guide is listed on the bowl floor, along with a thick outer coating and a thick rubber silencer pad. The package is the fullest in this group alongside the Delta: two 304 stainless steel dish grids, two drain strainers, a drying rack, a cutting board, a colander, installation clips, a cutout template and an installation guide.

Pros: 16 gauge steel, two bowls, a low divider and a long parts list in one box. Cons: the dark nano finish is the only finish listed, and a double bowl at this width gives each side less room than a single bowl of the same size. Buy if you want the workstation pattern and a divided bowl together. Skip if you prefer a plain steel finish or one open bowl for oversize pans.

Elkay Crosstown ECTSR33229T1WS workstation kit

Elkay lists the ECTSR33229T1WS as a single bowl workstation kit in stainless steel, 18 gauge, with a Slim Rim that installs as a drop-in or an undermount. Overall dimensions are listed at 33 by 22 by 9-5/16 inches, the bowl at 30-1/2 by 17 by 9 inches, and the minimum cabinet size at 36 inches, with one hole drilling.

The maker lists Type 304 stainless steel, full spray sound deadening on the sides and bottom with side and bottom pads, and an offset drain. The kit contents are stated plainly: the ECTSR33229T1 sink, an HDBG2914W bottom grid, an HDCB1117W black cutting board, an LK100 drain and an LKDR1317RU black roll-up rack. The built-in ledge carries those parts across the bowl, which is the working difference between this kit and a bare sink of the same size.

Pros: two mounting routes, a workstation ledge, and grid, board, rack and drain all listed in the box. Cons: the steel is 18 gauge where two rivals here list 16, and the ledge parts need storage when they are not riding the sink. Buy if your remodel has not settled the mount type yet. Skip if heavy pans daily make the thicker gauge your first filter.

Kraus KHU103-33 Standart PRO 60/40 double bowl sink

Kraus describes the KHU103-33 as a 33 inch undermount sink in a 60/40 double bowl layout, made with heavy-duty TRU16 gauge stainless steel. The listing page gives overall dimensions of 32.75 by 19 by 10.25 inches, a satin finish, rounded corners and a rectangular shape, with undermount as the installation type.

The maker description lists NoiseDefend sound dampening pads, channel grooves for draining, and a parts set of a protective bottom grid, a drain assembly with strainer, a template and mounting hardware. Two fields are missing from the page opened for this guide: the maker does not state the individual bowl dimensions there, and does not state a minimum cabinet size there. In a spec comparison that gap matters, because the 60/40 split cannot be turned into exact bowl widths from the page alone.

Pros: 16 gauge steel, an uneven split that suits a large wash bowl beside a smaller rinse bowl, and grid plus drain assembly listed in the description. Cons: bowl and cabinet figures need confirming on the maker page before ordering, and the mount is undermount only. Buy if the 60/40 pattern matches how you wash up. Skip if you want every dimension stated before you commit.

Delta Lorelai 95B932-32S-SS workstation sink

Delta lists the Lorelai 95B932-32S-SS as a 32 inch undermount workstation sink in 16 gauge stainless steel with a SatinSheen finish and a WorkFlow ledge. Outer dimensions are listed at 32 by 19 by 9.5 inches, the bowl at 30 by 16 by 9 inches, the minimum cabinet size at 36 inches and the drain opening at 3.88 inches.

The kit list is long and specific: the sink, an acacia cutting board with a mobile device holder at 12 by 16.75 by 0.75 inches, a roll-up dish drying rack with a removable utensil holder, a silicone drying mat, a stainless steel bottom grid, and a stainless steel drain assembly with a removable cover, plus hardware and a cut-out template. The maker also lists NoiseDefend soundproofing pads on all sides, an anti-condensation undercoating and a rear-offset drain that frees cabinet space below the bowl.

Pros: 16 gauge steel, the most detailed parts list here, and a rear-offset drain. Cons: undermount only, and the board, rack and mat are three more items to store in a small kitchen. Buy if you will genuinely work over the sink with board and rack. Skip if you want a drop-in swap that reuses an existing cutout.

Elkay Quartz Classic double bowl sink with Aqua Divide

The listing page for this Elkay Quartz Classic model describes a molded quartz body at 33 by 19 by 10 inches, undermount, with two equal D-shape bowls. Each bowl is listed at 15.17 by 16.77 by 10 inches, the drain at 3.50 inches toward the rear center, and the minimum cabinet size at 36 inches, in a choice of four finishes.

The divider is the Aqua Divide pattern, a low center wall that lets pan handles extend over the middle and lets a large item rest across both bowls, which is a different answer to the divider question from the IAK low divider in steel. The finishes listed are Black, Dusk Gray, Greystone and White, and the maker lists heat resistance up to 535 degrees Fahrenheit for the molded material. No grid, board or drain kit is listed on the page opened for this guide, so the comparison here is body material and bowl shape against the steel kits, part for part.

Pros: a molded quartz body in four colors, deep 10 inch bowls and a low divider. Cons: no parts kit is listed, and quartz at this size is a heavy lift at 37 lb as listed. Buy if color and a molded body lead your list. Skip if a ledge and a full kit matter more than the material.

Elkay Crosstown ECTSRS33229T dual mount sink kit

Elkay lists the ECTSRS33229T as a Crosstown single bowl kit in polished satin stainless steel, 33 by 22 by 9 inches overall, with a bowl of 30-1/2 by 16.75 by 9 inches. The steel is listed as 18 gauge Type 304, the minimum cabinet size at 36 inches, the drain at 3.50 inches toward the rear center, and the deck carries four installation holes.

The Slim Rim text on the listing page states the sink installs as a drop-in or undermount, and the Sound Guard text lists pads and undercoating. The kit line is short and exact: the ECTSRS33229T sink and a CTXBG2915 bottom grid. Against its workstation relative earlier in this list, the trade is visible field by field: same family footprint, no ledge parts, no board, no rack, no drain listed, and a shallower parts story at the same cabinet figure.

Pros: dual mount flexibility, four faucet holes for a deck-mounted setup, and a grid included. Cons: 18 gauge steel and the shortest parts list in this group. Buy if your remodel keeps a deck-mounted faucet and wants a simple kit. Skip if workstation parts or 16 gauge steel are the point of the purchase.

Buying guide

A spec-led comparison works only if the fields are read in the right order. Start with the box contents, then the gauge or material, then the bowl and cabinet figures, then the mount. The five notes below use the six models in this list to show how each field changes what a given figure actually buys in daily use.

Count the box before comparing prices for kitchen sinks

Parts lists are the easiest field to compare and the easiest to overlook. In this group the fullest boxes, the IAK and the Delta Lorelai, list grids, a strainer or drain assembly, a cutting board, a rack and a template, while the plainest box, the Elkay ECTSRS33229T kit, lists a sink and one bottom grid and nothing else.

That gap is real specification, not packaging trivia. A grid keeps heavy pans off the bowl floor, a board and rack turn a workstation ledge into prep space, and a drain assembly is a part every sink needs on day one. When two sinks sit in the same broad band, the one with the fuller listed box is the fuller purchase, and the one with the short list will need those parts bought and fitted separately.

Gauge and material are the long term fields

Steel thickness in this list splits cleanly: the IAK, the Kraus and the Delta list 16 gauge, and the two Elkay Crosstown kits list 18 gauge Type 304. A lower gauge number means thicker steel, and thicker steel is the field most tied to dent resistance and to how a bowl feels under a heavy pan load day after day.

Material widens the choice further. The Elkay Quartz Classic is a molded quartz body rather than a steel bowl, with four listed finishes and a maker-listed heat resistance figure of 535 degrees Fahrenheit. Neither material wins in general: steel gives gauge choice and ledge kits, quartz gives color and a molded D-shape bowl. Decide which field leads before comparing any figures.

Bowl split and divider height change daily work

Three divided patterns appear here: the IAK 50/50 split with a low divider, the Kraus 60/40 split, and the Elkay quartz equal bowls over an Aqua Divide low center wall. A 50/50 split suits two equal jobs, a 60/40 split gives one bowl more width for pans, and a low divider in either pattern lets long items rest across the middle.

Single bowls answer differently. The Delta bowl at 30 by 16 inches and the Elkay bowls at 30-1/2 inches wide take any pan shape without a divider in the way, and the workstation ledges add the second work zone on top of the bowl instead of inside it. Match the pattern to your largest pan and your washing habit, in that order.

Mount type decides the remodel path

Two models here are undermount only, the Kraus and the Delta, and they need a counter that suits undermount fitting, usually stone or solid surface, with the rim hidden below. Two Elkay kits list a Slim Rim that installs as a drop-in or undermount, which keeps both routes open while the counter decision is still moving.

The IAK is listed as undermount and the quartz Elkay as undermount, each with a stated cutout or template path. In a remodel that keeps an existing counter, a dual mount model is often the practical pick even when its other fields are plainer, because it avoids cutting a new opening to a new pattern.

Cabinet size is the gate every model must pass

Every model in this list with a stated figure lists a minimum cabinet size of 36 inches, which makes the gate simple to state and easy to forget. A 33 inch sink does not fit a 33 inch cabinet; the mounting hardware and bowl walls need the extra room the maker figure already accounts for in the stated minimum.

One model here states no cabinet figure on the page opened for this guide, the Kraus KHU103-33, and that absence is a task, not a detail: confirm the figure on the maker page before ordering. Measure the inside of your sink base, compare it with the stated minimum for the exact model, and only then compare the remaining fields.

FAQ

These answers cover the questions a spec comparison raises most often: which fields matter most, how gauge shows up in daily use, whether a fuller box is worth choosing, how a low divider behaves with soaking water, and what to do when a maker page leaves a field unstated for a model you like.

Which fields matter most when comparing prices for kitchen sinks?

Box contents, gauge or material, bowl dimensions and cabinet size, in that order. Those four fields are all stated on maker pages, they change what arrives and how the sink works, and they stay true long after a listing figure changes. Mount type follows close behind in any remodel where the counter is already chosen.

Finish and styling sit last for a reason. The gunmetal finish on the IAK and the four quartz colors on the Elkay change how a kitchen looks, but they do not change how a bowl holds a roasting pan. Read the working fields first and let the finish settle a tie, not lead the decision.

Does 16 gauge feel different from 18 gauge in daily use?

The makers in this list state the gauge plainly: 16 for the IAK, Kraus and Delta models, 18 for the two Elkay Crosstown kits, both in Type 304 steel where the Elkay pages name the grade. Thicker steel flexes less under a heavy pan and carries sound differently, which is why the 16 gauge pages pair the figure with dampening pads.

Gauge is not the whole story. Bowl depth, pads and undercoating all shape how a sink sounds and feels, and the Elkay kits list full spray or Sound Guard treatments. Read gauge together with the sound deadening field rather than as a single deciding number.

Is a fuller parts box worth choosing over a plainer kit?

If you will use the parts, yes, and the lists here show the scale of the difference. The Delta kit lists a board, a rack with a utensil holder, a drying mat, a grid and a drain assembly with a cover. The plain Elkay kit lists a grid. Those are different purchases wearing the same word kit, and only the listed contents tell them apart.

If you already own a grid and a board that fit, the plainer box loses less. Inventory what you have, in the size of the new bowl, before deciding. A board cut for a 30 inch workstation bowl does not transfer to every other sink in this list.

What does a low divider change at washing up?

A low divider keeps two bowls apart for ordinary loads while removing the height barrier between them. The IAK lists a low divider across its 50/50 bowls, and the Elkay quartz lists the Aqua Divide low center wall, so a baking sheet or a long pan handle can rest across the middle instead of fighting a full-height wall.

The trade is water depth on one side. A low wall will not hold a deep soak in one bowl while the other stays dry at the same level. If deep one-sided soaking is a daily habit, a full divider single pattern or a single bowl with a separate soaking routine fits better.

What if a maker page leaves a field unstated?

Treat the gap as unknown, not as average. In this list the Kraus page opened for this guide states no bowl dimensions and no cabinet figure, so this article reports the overall size and the split and flags the rest. The fix is to open the maker page for that exact model and read the missing field there before ordering.

Never fill a gap from a similar model. Two Crosstown kits in this list share a family name and a footprint yet differ in depth, ledge and contents. Model numbers exist because the fields differ, and the stated fields for the exact model are the only ones that count.

Conclusion

On specs, the shortlist is clear: the Delta Lorelai and the IAK for full workstation kits in 16 gauge steel, the Elkay Quartz Classic for a molded body and color, and the plain Elkay dual mount kit where a simple box and four faucet holes fit the remodel. Count the box, read the gauge, confirm the cabinet, and the figure follows.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.