Updated Nov 16, 2026· 14 min read

Key takeaways

  • Six GROHE kitchen faucets compared on published specs only: SilkMove cartridges, spray counts, spout reach, flow rates, hole counts and all finishes in full.

Shoppers comparing prices for grohe kitchen faucets face one brand spread across pull-out, pull-down, bar and bridge designs, all built on the same cartridge family. This guide lines up six GROHE models by published specification: cartridge, spray type, spout reach, flow rate and finish, so the range can be read by hardware.

Quick verdict

Read on specification alone, the GROHE range splits into clear tiers. The Essence and Concetto share a 35 mm SilkMove ceramic cartridge and a 1.75 gpm ceiling, the Zedra adds a third spray pattern and a pause button, and the two Bridgeford models trade the cartridge story for brass bodies, with one carrying a side spray at 2.2 gpm.

The Minta sits with the pull-out group on flow and cartridge, set apart by its C-spout shape and a published product height of 379 mm. The Bridgeford single-hole model is the compact traditional option, with the shortest reach in this group at 6-15/16 inches. Both Bridgeford faucets are sold less handles, which is the single most important line on their specification sheets.

Finish splits the range as cleanly as spray count does. StarLight Chrome covers the Essence and both Bridgeford models, while SuperSteel appears on the Concetto, the Minta and one Zedra variant. A buyer who wants SuperSteel is therefore choosing among the pull-out and pull-down designs, and a buyer who wants a traditional bridge body is choosing chrome, before any other specification is weighed.

Product Type Best for Key spec Main limit
GROHE Essence 32170000 Pull-out, single hole Trimming flow at the faucet 1.75 gpm, adjustable flow limiter Single spray pattern only
GROHE Concetto 32665DC3 Pull-out, high spout Docking manners EasyDock, dual spray No reach figure printed on the sheet
GROHE Minta 31378DC3 Pull-out, C-spout Contemporary kitchens Reach 8-9/16 inches, 1.75 gpm Height printed in millimeters only
GROHE Zedra 32298 Pull-down, triple spray Spray choice Three spray types, pause button Tallest body in the group
GROHE Bridgeford 20158000 Bridge style, side spray Traditional four-hole decks 2.2 gpm, brass body and spray Handles sold separately
GROHE Bridgeford 31055000 Single-hole, traditional Compact traditional fit Solid brass body, 1.75 gpm Handles sold separately

How we selected

Only GROHE kitchen faucets with a published specification sheet were considered, and every figure here traces to those sheets: cartridge type, spray patterns, spout reach, faucet height, flow rate, hole count and finish. Models whose sheets print no flow rate or no dimensions were left out, because a specification comparison cannot run on gaps.

The six models were chosen to span the brand range rather than to repeat one design: two pull-out sprayers with different spray counts, a C-spout pull-out, a triple spray pull-down, and two traditional Bridgeford bodies. Where a sheet prints a figure in one unit only, the article keeps that unit, so the Minta height stays in millimeters as GROHE publishes it.

Statements from the maker are reported as the maker prints them. When GROHE states that the Zedra blade spray reduces water consumption by up to 50 percent, the figure appears here as a maker statement about that spray mode, not as a measured result, and the same handling applies to docking and finish claims across the six sheets.

Prices for grohe kitchen faucets: six models compared on specs

With no tags in view, specification is the only honest way to sort this brand. The entries below follow the hardware in order: cartridge first, then spray system, then the dimensions and flow rate, then finish. The pattern is a 1.75 gpm ceiling and one cartridge family, with the differences concentrated in spray count, body material and size.

GROHE Essence 32170000

The Essence is the flow-control model of the range. Its sheet lists a GROHE SilkMove ceramic cartridge at 1.4 inches (35 mm) and an adjustable flow rate limiter, so the maximum flow can be trimmed at the faucet during installation. The published ceiling is 1.75 gpm, and the spray system is a single spray pull-out with automatic returning.

Spout reach is 8-9/16 inches, the spout swivels, and installation is single hole. The finish is StarLight Chrome. GROHE also lists stainless steel flex lines, a quick installation system, integrated non-return valves and backflow protection. For a buyer comparing within the brand, this is the model whose sheet talks most about control and least about spray variety.

The optional temperature limiter is the other control detail on the Essence sheet, listed by reference number 46 375 as an accessory for the cartridge. No other model in this group prints a temperature limiter option on its opened sheet, so a household that wants that fitting ceiling has one documented route inside this range, and it runs through the Essence.

  • Pros: adjustable flow rate limiter on the sheet
  • Pros: automatic returning pull-out spray
  • Pros: 35 mm SilkMove ceramic cartridge
  • Cons: single spray pattern, the fewest in this group
  • Cons: single hole installation only

Buy if flow trimming and a single clean spray pattern fit the kitchen. Skip if a second or third spray mode matters, because the Concetto and Zedra below publish dual and triple spray systems on the same cartridge family.

GROHE Concetto 32665DC3

The Concetto pairs the same 35 mm SilkMove ceramic cartridge with a pull-out dual spray. The diverter switches between a laminar spray and a SpeedClean shower jet, and GROHE lists EasyDock, which the maker describes as guaranteeing easy retraction and smooth docking of the spray head back to its starting position.

The sheet describes a high spout design with single hole installation, a swivel spout, an integrated non-return valve and backflow protection. Maximum flow rate is 1.75 gpm. The finish on this model is SuperSteel InfinityFinish, over the StarLight finish system. Stainless steel flex lines and a quick installation system are listed as well.

  • Pros: dual spray with laminar and shower jet modes
  • Pros: EasyDock docking system named on the sheet
  • Pros: high spout shape for pot clearance
  • Cons: no spout reach figure printed on the opened sheet
  • Cons: single hole installation only

Buy if docking behavior and two spray modes matter more than a printed reach figure. Skip if the sink is unusually deep, because the Zedra and Minta publish their reach in inches and the Concetto sheet does not.

GROHE Minta 31378DC3

The Minta is the design-led pull-out in this group, built around a C-spout. GROHE lists a SilkMove ceramic cartridge, a locking dual spray pull-out with an integrated spray head, and a swivel spout. Spout reach is printed at 217 mm (8-9/16 inches) and maximum flow rate at 6.6 L/min (1.75 gpm), level with the Essence and Concetto.

The published product height is 379 mm and the width 223 mm, the only model here dimensioned in millimeters on its page. The finish is Super Steel, with StarLight chrome also named for the line. GROHE lists WhisPer technology for a quieter stream sound, a SpeedClean anti-lime system, an adjustable flow rate limiter, stainless steel flex lines and a single lever handle, with single hole installation.

  • Pros: locking dual spray holds the chosen mode
  • Pros: reach printed in both millimeters and inches
  • Pros: adjustable flow rate limiter, like the Essence
  • Cons: overall height printed in millimeters only
  • Cons: C-spout shape will not suit traditional kitchens

Buy if the C-spout profile fits the kitchen design and a locking spray is wanted. Skip if the project paperwork needs every dimension in inches, because this page publishes the body dimensions in millimeters.

GROHE Zedra 32298

The Zedra carries the widest spray system in the GROHE kitchen range: a pull-down spray with three spray types, laminar spray, shower spray and a blade spray. GROHE states the blade spray reduces water consumption by up to 50 percent against laminar mode with stronger spray performance, and a pause button halts the flow at the head.

Dimensions are the largest in this group: faucet height 15-13/16 inches, aerator height 8-3/8 inches and faucet reach 9-5/16 inches, on a 360 degree swivel spout. Flow is 1.75 gpm, the fitting needs one hole, and the finishes are chrome (32298003) and SuperSteel (32298DC3). The sheet also lists SilkMove, StarLight, an adjustable flow rate limiter, nylon braided flex hoses and the QuickFix Plus installation system.

  • Pros: three spray types, the most in this group
  • Pros: pause button stops flow at the spray head
  • Pros: longest reach here, at 9-5/16 inches
  • Cons: tallest body here, at 15-13/16 inches
  • Cons: blade spray claims are maker figures, stated as published

Buy if spray choice and reach top the comparison. Skip if a low profile is needed under cabinets or shelves, because no other model in this group stands as tall as the Zedra.

GROHE Bridgeford 20158000

The Bridgeford with side spray is the traditional entry, and its sheet leads with construction: brass body and spray. It is a four-hole installation with a separate side spray, a 9-1/4 inch faucet reach and the highest maximum flow rate in this group, 2.2 gpm. The finish is StarLight Chrome.

One line on the sheet changes how this model must be read: handles are sold separately, and the sheet names the handle sets to order (18 244 / 18 733). The faucet is therefore a body and spray only as published. Buyers comparing it against the single-lever models above are comparing a two-handle traditional layout that needs a handle choice before the specification is complete.

  • Pros: brass body and brass spray, stated on the sheet
  • Pros: 2.2 gpm, the highest flow in this group
  • Pros: separate side spray for a four-hole deck
  • Cons: handles sold separately, not part of the faucet as listed
  • Cons: four-hole installation only

Buy if the deck has four holes and a traditional two-handle layout is the goal. Skip if a complete single-lever faucet in one specification is wanted, because this model publishes its handles as a separate order.

GROHE Bridgeford 31055000

The second Bridgeford is a single-hole kitchen faucet with a solid brass body, per its sheet. GROHE lists SilkMove operation, a faucet height of 10-7/8 inches, a spout reach of 6-15/16 inches and an aerator height of 7-3/16 inches. Maximum flow rate is 1.75 gpm, level with the modern models above, and the sheet notes CALGreen compliance.

Like its four-hole sibling, this Bridgeford is published less handles: the sheet states that handles are sold separately and names the same handle sets (18 244 / 18 733). The finish is StarLight Chrome. On specification alone it is the compact traditional option of the six, with the shortest reach and a brass body the modern models do not claim on their sheets.

  • Pros: solid brass body stated on the sheet
  • Pros: compact height and reach for smaller decks
  • Pros: 1.75 gpm with CALGreen compliance noted
  • Cons: handles sold separately, as with the other Bridgeford
  • Cons: shortest spout reach in this group

Buy if a traditional single-hole body in brass fits the remodel. Skip if reach matters, because at 6-15/16 inches this spout covers less of a wide sink than any other model here.

Buying guide

Inside one brand, the useful comparison points are the ones GROHE itself prints: cartridge size, spray count, swivel range, reach, height, flow rate and finish system. The sections below work through those points in the order they narrow a choice, ending with the specification factors that separate one tier of the range from the next.

Cartridge size and the SilkMove family

Every lever model here runs a GROHE SilkMove ceramic cartridge, and two sheets print the size: 1.4 inches (35 mm), in the Essence and Concetto. A printed cartridge size is worth recording at purchase time, because it is the figure a future cartridge order will ask for. The Minta and Zedra sheets name SilkMove without a size on the opened pages.

The Bridgeford sheets split: the single-hole model lists SilkMove, while the four-hole side spray model does not name a cartridge on its sheet. That gap is a specification fact in itself. A buyer who wants the cartridge documented before purchase has it in writing for five of these six models.

Spray count: single, dual and triple

Spray count is the clearest ladder in the range. The Essence publishes a single spray pull-out. The Concetto and Minta publish dual spray systems, with the Concetto naming its two modes as laminar spray and a SpeedClean shower jet, and the Minta adding a locking control so the chosen mode stays set.

The Zedra tops the ladder with three spray types and a pause button. More spray modes help when one faucet covers filling, rinsing and scrubbing in a single bowl. In a kitchen with a separate prep sink, the single spray Essence covers the main sink work without the extra diverter hardware.

Docking belongs in the same comparison, because a spray head that hangs loose loses the point of the format. Only the Concetto sheet names its docking system, EasyDock, in so many words. The Essence answers with automatic returning on its pull-out, and the Zedra sheet describes automatic return to laminar spray, which is a mode reset rather than a docking claim.

Reach and height across the range

Reach decides how much of the sink the water covers, and the spread runs from 6-15/16 inches on the compact Bridgeford to 9-5/16 inches on the Zedra. Height runs from 10-7/8 inches on that same Bridgeford to 15-13/16 inches on the Zedra. The two figures pull in opposite directions: reach serves the sink, height must clear the space above it.

Measure both before choosing. A deep double bowl argues for the longer reaches of the Zedra or the Bridgeford side spray model at 9-1/4 inches. A sink under a low shelf argues for the Bridgeford single-hole or the Essence pattern, where the published heights stay near the bottom of the group.

Finishes: StarLight Chrome and SuperSteel

Two finish names cover all six models. StarLight Chrome appears on the Essence and both Bridgeford sheets, and GROHE presents StarLight as its finish system across the range. SuperSteel appears as the finish of the Concetto (SuperSteel InfinityFinish), the Minta in Super Steel, and the Zedra as model 32298DC3 beside the chrome 32298003.

Finish choice interacts with the rest of the specification. The SuperSteel models here are the pull-out and pull-down designs, while the chrome Bridgeford pair are the traditional bodies. A buyer set on SuperSteel is therefore also choosing a modern spray system, whether or not that was the original plan.

The Zedra shows the overlap most clearly, because one model number carries both finishes: 32298003 in chrome and 32298DC3 in SuperSteel, with identical spray, reach and flow figures on the sheet. Where a range offers that pattern, finish can be chosen on appearance alone, since the hardware underneath does not change between the two variants.

What changes prices for grohe kitchen faucets between models

By specification, four factors separate the models. Spray count rises from single to dual to triple. Body material rises from standard lever-model construction to brass bodies on both Bridgeford sheets. Dimensions rise from the compact Bridgeford to the tall Zedra. Hardware falls on the Bridgeford pair, whose handles are separate orders.

None of those factors is visible from a product name alone, which is why this guide sorts by sheet rather than by series. A buyer who lists the four factors in order of personal importance can place any GROHE model on the same scale, including models outside this six, as long as the maker sheet prints the figures.

FAQ

The questions below are the ones a specification comparison raises most often for this brand: flow ceilings, handle supply, spray formats and hole counts. Each answer uses only figures and statements printed on the six specification sheets behind this guide, so the answers hold for these models as published.

Are all six GROHE models rated at 1.75 gpm?

Five of the six are. The Essence, Concetto, Minta, Zedra and the single-hole Bridgeford each publish a maximum flow rate of 1.75 gpm. The exception is the Bridgeford with side spray, model 20158000, whose sheet publishes a maximum flow rate of 2.2 gpm, the highest figure in this group.

Two models add control on top of the ceiling figure. The Essence and the Minta both list an adjustable flow rate limiter, and the Zedra lists one as well, so the installed maximum can be set below the published ceiling during fitting. The Concetto and Bridgeford sheets print no limiter on the opened pages.

Flow figures also explain the Bridgeford side spray model standing apart. Its 2.2 gpm ceiling matches an older generation of kitchen specification, while the rest of the range has settled at 1.75 gpm. A household replacing a high-flow faucet from that older generation will find the Bridgeford sheet closest to the outgoing fixture on this one figure.

Do these GROHE faucets include their handles?

The four modern models are single-lever designs with the handle as part of the faucet: the Essence sheet lists a single lever handle, and the Concetto, Minta and Zedra are published as single-handle models. Their specification is complete as printed, with no separate handle order named.

The two Bridgeford models are different. Both sheets state that handles are sold separately and name the handle sets to order, 18 244 / 18 733. Any comparison that reads a Bridgeford as a finished specification without its handle set is missing a required part of the installation.

Pull-out or pull-down: which GROHE spray format suits a deep sink?

The pull-down model here, the Zedra, publishes the longest reach at 9-5/16 inches and the tallest body, which suits a deep sink with headroom above it. The pull-out models (Essence, Concetto, Minta) draw the spray head forward from the spout and publish reaches of 8-9/16 inches where printed, with lower bodies.

The Bridgeford side spray model reaches 9-1/4 inches with its fixed spout and covers the sink with a separate spray instead. For a deep sink under a shelf, that fixed spout plus side spray pattern can fit where the tall Zedra body cannot, which is why format should follow the measured space, not habit.

Which of these models fit a single-hole deck?

Five of the six publish single hole installation: the Essence, the Concetto, the Minta, the Zedra and the single-hole Bridgeford 31055000. The Zedra technical data states the number of holes required as one. Only the Bridgeford 20158000 is fixed to a four-hole installation, because its deck layout includes the separate side spray.

Single hole fit does not settle the whole deck question. A three-hole deck under a single-hole faucet leaves two holes to cover with an escutcheon or other fittings, and the opened sheets for these models do not all name an escutcheon. Confirm the covering hardware for the specific deck before ordering.

Conclusion

On specification alone: the Zedra leads on spray count and reach, the Essence and Minta lead on flow control, the Concetto on docking, and the Bridgeford pair on brass construction, with handles as separate orders. Sort the GROHE range by cartridge, spray system and printed dimensions, and the right model identifies itself.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.