Updated Nov 16, 2026· 15 min read

Key takeaways

  • Six personal mixers for monitoring compared on channels, EQ, headphone power and network limits, from a 10-channel analog-style unit to a 40-channel system.

A personal monitor mix is the one mix a performer cannot hand to anyone else, yet it is often the last one the engineer has time to fix. These personal mixers for monitoring put level, pan and tone for every source in the performer’s own hands, so each musician builds the blend they need and the main mix stays untouched.

Quick verdict

The six units split by network and by how much control each performer gets. The Allen & Heath ME-1 handles the most sources at 40, the Livemix CS-DUO gives two complete mixes in one box, and the Hear Back OCTO strips the control set down to plain level knobs for fast, volunteer-run stages and rehearsal rooms.

Choose by the console or hub the system must join first, because none of these mixers takes analog inputs on its own. Allen & Heath and PreSonus tie their personal mixers to their own digital console families, Aviom and Hear Technologies run their own networks from an input module or hub, and Behringer feeds its mixer from an input module or a compatible digital console. Processing is the second split: the EarMix 16M and the CS-DUO put EQ and dynamics on every channel, while the OCTO offers level control only.

Model Sources Control at the mixer Headphone power Network
Allen & Heath ME-1 40 sources Level, pan and groups; master 3-band EQ and limiter 300 mW + 300 mW into 100 ohms Allen & Heath ME over Cat5
Aviom A320 16 mono or stereo sources Volume, Stereo Placement, solo and mute 275 mW per side into 50 ohms Aviom A-Net
PreSonus EarMix 16M 16 mono inputs Level, pan, 3-band EQ and limiter per channel 150 mW per channel at 60 ohms AVB, Milan-certified
Behringer Powerplay P16-M 16 channels Level, pan/spread and 3-band EQ per channel Not stated on the maker page Behringer Ultranet
Digital Audio Labs Livemix CS-DUO 24 channels plus 4 accessory channels EQ and compression per channel; master EQ, compression and reverb 250 mW at 32 ohms Livemix over Cat5e
Hear Technologies Hear Back OCTO Mixer 10 channels (8 mix inputs plus stereo aux) Level per channel and master volume 1.37 W per channel at 32 ohms HearBus over Cat5e

How we selected

Selection rests on published specifications and maker documentation for personal mixing systems that are sold as complete, current products. A unit had to be a true personal mixer: one box per performer, fed from a central console, input module or hub, with the mix built at the performer’s own position rather than at the main desk.

The comparison weighs five things that decide daily use. First, how many sources reach the performer, since subgrouped feeds limit what can be fixed at the mixer. Second, the control set on each channel: level alone, level with pan, or level with EQ and dynamics. Third, headphone output power, because in-ear monitors and headphones present very different loads. Fourth, the network the mixer joins and the hardware that must feed it. Fifth, presets and grouping, which decide how fast a performer can rebuild a mix between songs or between services.

Six personal mixers for monitoring, compared in detail

The six systems below cover the main networks in current use. Each entry states what the maker publishes about sources, processing, outputs and power, and names the limit that matters most, so the choice turns on the rig the mixer has to join and the control a performer actually needs at the stand.

Allen & Heath ME-1

The ME-1 is the high-count option in this group: it receives up to 40 sources over a single Cat5 cable from an Allen & Heath console or an ME-U hub. Sixteen assignable keys each call up a single channel or a group, and the OLED display shows channel names picked up from the console, so a performer works with names rather than numbers.

Control covers level, pan, solo and grouping for the sources, with up to 16 groups available, and a 3-band EQ plus a limiter on the master output rather than per channel. Sixteen user presets store levels, mutes, pans and key assignments and can move between units on USB. A built-in ambient microphone with its own level control lets room sound back into the ears, and a stereo aux input takes a local source such as a click track. Headphone sockets are fitted in both 3.5mm and 1/4 inch sizes, rated at 300 mW + 300 mW into a 100 ohm load, and a mono line output can feed a wedge. Conversion is 24-bit at 48 kHz, and the unit runs on PoE at 10 W or on the supplied 12V DC adapter. It measures 230 x 160 x 70 mm and weighs 1.1 kg.

The fit is direct with dLive, GLD, Qu and SQ consoles. Through the ME-U hub it also joins Dante, MADI and EtherSound systems and third-party consoles, and an Aviom compatibility mode lets it sit in Pro16 systems. The limit is the flip side of that design: there is no per-channel EQ, and the mixer does nothing until it is plugged into a compatible console or hub.

  • Pros: 40 sources, named channels on an OLED display, 16 presets, ambient mic built in
  • Cons: EQ and limiter are master-only; needs an Allen & Heath console or ME-U hub
  • Buy if: your console is Allen & Heath, or Dante/MADI via ME-U, and source count runs high
  • Skip if: you want EQ on every channel at the performer’s position

Aviom A320

The A320 takes the opposite approach to the ME-1: fewer sources, handled in stereo. Each of its 16 channels can host a mono or a stereo source, because a 32-channel mix engine sits behind the panel. A stereo keyboard or a stereo effects return takes one channel button instead of two, which keeps the surface readable while a performer is playing.

Every channel gets volume and a Stereo Placement control that handles pan for mono sources and pan plus spread for stereo ones, along with solo and mute. Tone shaping is a three-band master control set tuned for in-ear monitors; there is no per-channel EQ. Eight mix presets store the settings. The single output is a 1/4 inch TRS stereo jack that serves headphones or a line feed to a wireless in-ear transmitter, rated at 275 mW per side into 50 ohms. D/A conversion is 24-bit at 44.1 or 48 kHz, latency is listed at 0.880 ms, and the signal to noise figure is -106 dB. The unit measures 10.26 x 6.14 x 1.91 inches and weighs 1.3 lb.

One condition shapes any A320 purchase: it has no DC power input at all. Power arrives over the Cat-5 cable from an A-Net Distributor, which is required, with runs up to 400 ft between devices. The mixer runs in Pro16 mode for 16-channel systems or Pro16e mode for the full stereo-source layout, and it can share a system with the A640, A360 and A-16II.

  • Pros: stereo sources keep their image on single channel buttons; very low listed latency
  • Cons: no per-channel EQ; an A-Net Distributor is required for power and signal
  • Buy if: your rig is Aviom-based and stereo sources matter more than channel count
  • Skip if: you need tone control on individual channels

PreSonus EarMix 16M

The EarMix 16M is built for StudioLive Series III rigs and gives each performer 16 mono inputs over a Milan-certified AVB network. It stands out for processing depth at the channel level: every channel carries level, pan, solo, mute and stereo link controls, plus a 3-band EQ and limiter, and the main mix gets the same EQ and limiter treatment.

Channels can be grouped from the surface, and up to 16 mix scenes store a full setup locally. The headphone amplifier is rated at 150 mW per channel at 60 ohms, aimed at low-impedance in-ear monitors, and a pair of balanced 1/4 inch TRS line outputs with a maximum level of +18 dBu can drive powered floor wedges instead. An analog aux input takes a metronome or a reference track. Conversion runs at 44.1 or 48 kHz with a listed dynamic range of 115 dB, and the box measures 9.4 x 7.6 x 1.8 inches.

Up to 24 EarMix 16M units can share one network with a Series III mixer. Power comes from the included supply or over the Ethernet cable from a PoE switch such as the maker’s SW5e. The limit is ecosystem lock-in: the AVB feed expects a StudioLive Series III console or another Milan-certified device, so this is a mixer for PreSonus rigs first and everything else second.

  • Pros: EQ and limiter on every channel; 16 stored scenes; wedge outputs as well as headphones
  • Cons: built around the StudioLive Series III ecosystem; mono inputs only
  • Buy if: your console is a StudioLive Series III and performers want real channel processing
  • Skip if: your sources are mostly stereo and must stay stereo

Behringer Powerplay P16-M

The P16-M is the long-running Ultranet option: a 16-channel digital stereo mixer that receives its 16 signals and its power over one CAT5e cable from a P16-I input module or a P16-D distribution hub. The panel follows an analog layout of channel select buttons and knobs, with total recall and 16 presets for stored mixes.

Each channel has level and pan/spread control with an LED meter, a 3-band EQ with a sweepable mid band, and solo and mute. Global level and EQ controls sit above the channels, a panic mute kills the output at once, and a fully adjustable limiter guards the headphone output. A mono or stereo line output can feed a powered monitor, and a MIDI IN port allows remote control of all channels from an external MIDI controller. The maker lists 24-bit D/A conversion and system latency of less than 1 millisecond, and up to 48 P16-M mixers can be daisy-chained in large systems with the P16-D. Power comes from the included external supply or through the network hardware, and the unit mounts on a mic stand with the optional P16-MB bracket.

The trade-off is system assembly: the mixer needs its input module or a compatible digital console feed before it makes a sound, and the maker page does not state a headphone wattage figure, so output power cannot be compared on paper against the rated figures elsewhere in this guide.

  • Pros: per-channel EQ with sweepable mid; panic mute; scales to 48 mixers with distribution hubs
  • Cons: needs a P16-I or console feed to work; headphone power not stated by the maker
  • Buy if: you run Behringer or Midas digital consoles, or want an analog-style panel
  • Skip if: you want a mixer that pairs with a non-Behringer network

Digital Audio Labs Livemix CS-DUO

The CS-DUO puts two complete personal mixers in one enclosure. Sides A and B each form a discrete mix with their own headphone amplifier and outputs, so two performers standing side by side share one unit, one cable and one network port. That arrangement suits fixed positions such as a rhythm section, a choir riser or a studio live room.

Capacity is the highest here after the ME-1: 24 input channels plus 4 accessory channels. Every channel carries EQ and compression, with sweepable EQ, high-pass filtering and presets per channel, and the master output adds EQ, compression and reverb. A color LCD touchscreen shows a 12-channel overview with custom channel names. Built-in stereo ambient microphones, an intercom, a metronome and an aux input for a media device are all on board, and MirrorMix lets an engineer or a bandmate open any mix in the system from another unit and adjust it. Headphone power is listed at 250 mW at 32 ohms, frequency response at 20 Hz to 22 kHz within 3 dB, and the unit measures 8.2 x 6 x 1.594 inches at 1.9 lb. Audio and power arrive over one Cat5e cable from a MIX-16 or MIX-32 central mixer, with runs up to 100 m.

The limits follow from the shared box: two performers must be within one cable reach of the same spot, and the system starts with a central mixer purchase, so the first two mixes carry more hardware than the per-seat systems here.

  • Pros: two mixes per unit; per-channel EQ and compression; touchscreen with custom names
  • Cons: both performers share one location; requires a Livemix central mixer
  • Buy if: pairs of performers sit together and want deep control with remote help via MirrorMix
  • Skip if: every performer is spread across a wide stage

Hear Technologies Hear Back OCTO Mixer

The OCTO Mixer is the simplest control surface here. It offers local control of up to 10 channels: eight mix inputs from the OCTO Hub plus a stereo aux input on the mixer itself, which the maker suggests for a drum module or a metronome. Each channel is a level knob, and a master volume sets the level for the headphone and line outputs together.

What it gives up in processing it returns in output power. The headphone amplifier is rated at 1.37 W per channel into 32 ohms with distortion under 0.01 percent, the highest figure in this guide, and the balanced line outputs on two 1/4 inch TRS jacks reach a maximum of +28 dBu for powered wedges. Headphone jacks are fitted in both 1/8 inch and 1/4 inch sizes. Conversion is 24-bit D/A, latency is listed at under 1.5 ms, line output frequency response at 20 Hz to 20 kHz within 0.16 dB, and dynamic range at 122 dB typical. The mixer measures 5.1 x 9.3 x 2.519 inches, weighs 15.8 oz, and has a built-in 5/8 inch mic stand mount.

The hub is the system core: one hub supplies signal and power over Cat5e to as many as eight mixers, takes analog inputs on DB-25, ADAT optical or HearBus sources at 44.1 or 48 kHz, and hubs can be daisy-chained for larger counts. There is no channel EQ, pan or preset memory on the mixer, so tone decisions stay at the main console.

  • Pros: strongest headphone output here; dead-simple controls; hub takes analog or ADAT feeds
  • Cons: level-only control, no EQ or presets; eight mix inputs is the lowest count here
  • Buy if: volunteers or rotating players need a mixer nobody can misconfigure
  • Skip if: performers expect to shape tone at their own position

Buying guide

A personal monitoring system is bought as a chain: console or input hardware, network, cables and then the mixers. The mixer itself is the last link, so the buying questions start with the feed it will receive and end with the ears it will drive. The points below follow that chain in order.

Match the network before anything else

Every mixer in this guide belongs to one network family, and the families do not mix. Allen & Heath ME units talk to Allen & Heath consoles or the ME-U hub, EarMix speaks AVB to StudioLive Series III, Aviom runs A-Net from its own distributors, Behringer runs Ultranet, and Livemix and Hear Back each use their own hub-based systems.

A mixer bought for the wrong family is not a bargain at any specification, so confirm the console, input module or hub you already own, or count the matching feed hardware into the same purchase.

What personal mixers for monitoring must connect to

None of these units accepts a set of analog inputs on its own back panel. Each one waits for a digital feed: direct console outputs converted by an input module, a network port on a digital console, or a hub that takes analog aux sends, direct outputs or an ADAT feed and converts them.

Count the sources at that feed point, because the mixer can only offer what the feed carries. A 40-source mixer fed by a 16-channel input module is a 16-source system in practice.

Decide how much processing each performer needs

Processing at the mixer ranges from none to full channel strips. Level-only control, as on the OCTO, keeps the surface foolproof and leaves tone at the main desk. Pan and stereo placement help performers separate sources in their ears without more level.

Per-channel EQ and compression, as on the EarMix 16M and the CS-DUO, let a singer tame a harsh guitar or steady a dynamic bass at their own stand, at the cost of a deeper surface to learn. Match the depth to the player: rotating volunteers usually do better with less.

Headphone power and the load it must drive

Headphone figures are only comparable at the same load. The ratings in this guide run from 150 mW per channel at 60 ohms on the EarMix 16M to 1.37 W per channel at 32 ohms on the OCTO, with the ME-1 and A320 in between at their 100 and 50 ohm ratings.

Low-impedance in-ear monitors need little power but expose noise; high-impedance studio headphones need more drive. A limiter on the output, fitted to the ME-1, EarMix 16M and P16-M, caps the level a sudden transient can reach, which matters for hearing over a long service or tour.

Presets, groups and remote help

Presets decide how repeatable a mix is from night to night. The ME-1 and P16-M store 16, the EarMix 16M stores 16 scenes, and the A320 stores 8, while the OCTO stores none and simply returns to its knob positions. Grouping, offered by the ME-1, EarMix 16M and CS-DUO, lets one control ride the drums or the backing vocals as a unit.

Remote help is rarer: Livemix MirrorMix lets another user open and adjust a mix, and the P16-M accepts MIDI control, both useful when a performer cannot describe what they hear.

FAQ

Most questions about personal monitoring come down to fit: what the mixer joins, how many sources it needs, and who ends up running it. These answers use the published figures for the six systems in this guide and general practice for the rest, including cabling, grouping and power.

How many channels do personal mixers for monitoring need?

Enough to give each performer separate control of the sources they react to: their own voice or instrument, the lead vocal, the rhythm anchors and the talkback or click. Systems here span 10 channels on the OCTO to 40 on the ME-1, and sixteen sources cover most bands when stereo feeds are grouped at the console.

Large ensembles, click and cue tracks, and separate drum channels push counts higher. A mixer that runs short forces subgrouping at the console, which hands control back to the engineer.

Can a personal mixer work with any main console?

Only within its own feed system. A digital console from the same family is the direct route for Allen & Heath, PreSonus and Behringer mixers. Hub-based systems are more open: the Hear Back OCTO Hub accepts analog aux or direct outputs and ADAT, and the Livemix central mixers accept analog or Dante feeds.

The Allen & Heath ME-U hub bridges ME-1 mixers to Dante, MADI and EtherSound consoles from other makers. An analog console can feed most hub systems from its aux sends.

Do personal mixers replace the monitor engineer?

They move the routine work, not the responsibility. Performers handle their own balance changes during a show, which removes the stream of requests that fills a monitor engineer’s attention. Gain structure, feed assignment, RF coordination for wireless in-ears and fault finding still sit with the engineer or the person running the system.

On small rigs the same person often sets the feeds at soundcheck and then plays, which is where presets earn their keep.

What cable do personal monitor systems use?

Standard network cable in every case here: Cat5 or Cat5e carries both the digital audio and, in most of these systems, the power for the mixer. Listed maximum runs reach 400 ft between Aviom devices and 100 m from a Livemix central mixer, and one cable does both jobs.

Because of that, a spare cable and a spare mixer cover most field failures. None of these systems uses analog multicore between the feed point and the performer.

Can one personal mixer serve two performers?

One model here is built for exactly that: the Livemix CS-DUO holds two discrete mixes with separate headphone amplifiers and outputs in a single unit, aimed at performers who stand or sit together. The other five are one mix per unit, so each additional performer adds a mixer and a cable run.

Sharing a single mix between two people on a one-mix unit means both hear the same balance, which rarely suits two different instruments.

Conclusion

Start with the network your console already speaks, then choose control depth. The ME-1 suits source-heavy Allen & Heath rigs, the EarMix 16M gives StudioLive users EQ on every channel, the CS-DUO doubles up for paired performers, and the OCTO keeps things foolproof. The A320 and P16-M remain strong fits for Aviom and Ultranet systems.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.