Updated Nov 15, 2026· 15 min read

Key takeaways

  • Five meat hand grinders for wild game, picked from the opened maker and listing pages: stated coarse plates, #10 heads, cast iron and stainless steel cranks.

A hand grinder earns its keep during the hunting season only if its plates, head size and build match the work, so this guide compares five meat hand grinders for wild game on the facts makers print: coarse plate sizes, stated head sizes, body materials and the stuffing gear included for game sausage.

Quick verdict

For most home game processors, the Weston #10 is the closest match in this set, because its maker lists two face plates for medium and coarse grinding, 4.5 mm and 10 mm, in a tin plated cast iron body that clamps to a table or countertop and arrives ready to stuff sausage.

The LEM #10 Stainless Steel Clamp-On is the pick for readers who want stainless steel throughout: the maker lists a coarse 3/8 inch plate and a fine 3/16 inch plate, a stainless knife, and three stuffing tubes. The VEVOR cast iron #8 is the heavy iron option, with 5 mm and 8 mm plates and three stuffing tubes. The Huanyu WJJ-191b is the compact stainless pick with a clamp plus a suction cup. The Gefu Transforma is the light-duty end of the set, a mincer with coarse and fine plates that suits small batches and trim work rather than a whole animal.

One limit applies to the whole set and shapes every pick below. None of the five makers prints the words wild game or deer on the product pages behind this guide. The fit for game work therefore rests on facts the pages do state: a coarse plate for a first grind, a #10 or #8 head size as printed, heavy-duty cast iron or stainless construction, and stuffing tubes for turning trim into sausage.

Product Type Best for Key spec Main limit
Weston #10 Manual Tinned Meat Grinder and Sausage Stuffer (36-1001-W) Tin plated cast iron clamp-on Coarse first grinds and sausage stuffing Two face plates, 4.5 mm and 10 mm, listed for medium and coarse grinding Cast iron body needs drying and care between seasons
LEM #10 Stainless Steel Clamp-On Hand Grinder All stainless steel clamp-on Stainless build with a true coarse plate Coarse 3/8 inch and fine 3/16 inch stainless plates Only its own special plates and knife fit this grinder
VEVOR Manual Meat Grinder, Heavy Duty Cast Iron Hand Meat Grinder with Steel Table Clamp Cast iron #8 clamp-on Heavy iron body on a stainless clamp 5 mm and 8 mm cutting plates, 3 stuffing tubes Smallest head size in this set
Huanyu Manual Meat Grinder (WJJ-191b) Stainless steel clamp and suction Compact grinding on thin tabletops Clamp fits tabletops 0.39 to 1.97 inches, plus a suction cup Maker does not state plate hole sizes
Gefu Transforma Meat Mincer Manual mincer, clamp and suction foot Small batches, trim and sausage links Coarse and fine plates, stuffer attachment included Light-duty build; plate sizes not stated

How we selected

Each grinder in this guide had to clear the same bar: a maker or listing page that states a coarse grinding plate, a head size, or a heavy-duty body build, plus the mounting and stuffing details a game processor needs. Pages that printed none of those facts were left out, however familiar the brand name.

Game fit was judged only on what the pages state. A coarse plate matters because a first grind on venison or other game trim usually starts coarse before any finer pass, and the makers here print their coarse sizes plainly: 10 mm on the Weston, 3/8 inch on the LEM, and 8 mm on the VEVOR cast iron model. Head size matters for the same reason: a #10 head moves meat through a wider throat than a #8, and both Weston and LEM print the #10 size in the product name itself.

Mounting was the third filter. Hand grinding a full batch of game meat puts real torque through the handle, so every pick here clamps to a table or countertop, and two of them add a suction foot or cup as a second hold. Stuffing gear was the fourth filter, because much of a deer ends up as sausage: four of the five include stuffing tubes, a funnel, or a stuffer attachment in the box as the maker lists it.

What this guide does not do is repeat claims the pages never made. No maker in this set prints a pounds-per-hour figure for these hand models, none prints a game or deer claim, and none lists bone grinding. Where a page is silent, the product notes below say so instead of filling the gap.

Meat hand grinders for wild game, one by one

Five hand grinders follow, each with the plate sizes, head size, mounting and stuffing gear its maker or listing page states, and the limits a game processor should weigh before choosing. The order runs from the strongest game fit on stated facts to the light-duty option at the end.

Weston #10 Manual Tinned Meat Grinder and Sausage Stuffer (36-1001-W)

The Weston #10 leads this set because its listing states the two facts a game grind leans on most: a #10 head in the product name and two face plates listed for medium and coarse grinding, 4.5 mm and 10 mm. The 10 mm plate is the coarsest first-grind plate in this guide.

The body is tin plated cast iron, and the listing describes a hand-cranked grinder that clamps to a table or countertop, with a heavy-duty nylon auger bearing. Cast iron gives the unit its working weight, and the tin coating is the finish the maker prints for the body. The listing also notes the grinder arrives with a protective coat that needs a thorough cleaning before first use, a normal first step for coated cast iron.

For sausage work, the box contents matter as much as the grind, and this model lists a stuffing funnel, star and flange alongside the plates. That covers the common game-day pattern: coarse grind the trim, season it, then stuff it with the same machine. Buy it if your game work centers on one deer at a time and you want the coarsest stated plate in the set. Skip it if you do not want to maintain a cast iron body between seasons, because coated iron asks for drying and oiled storage habits that stainless steel does not.

LEM #10 Stainless Steel Clamp-On Hand Grinder

The LEM #10 is the stainless steel answer in this set: the maker describes a heavy-duty, all stainless steel construction, clamp-on style hand grinder, and lists two stainless steel plates, a coarse 3/8 inch and a fine 3/16 inch, with a stainless steel knife.

The coarse 3/8 inch plate sits close to the Weston 10 mm plate in working terms, so the first grind on game trim is covered, and the fine 3/16 inch plate handles the second pass for burger-style grinds. The maker lists three stuffing tubes, 1/2 inch, 3/4 inch and 7/8 inch, plus a stuffing star, which is the widest tube range in this guide and suits everything from snack sticks to larger sausage casings.

The clamp accommodates counters up to 1 1/4 inches thick, and the maker describes the polished stainless as easy to clean and rust resistant, a real advantage when a grinder goes back into storage after the season. One limit is printed plainly by the maker: standard LEM grinder knives and plates will not work with this hand grinder, which uses its own special plates and knife, listed by the maker as 10 mm and 4.5 mm replacement plates. Buy it if stainless cleanup and storage matter most. Skip it if you already own standard plates you hoped to share across grinders.

VEVOR Manual Meat Grinder, Heavy Duty Cast Iron Hand Meat Grinder with Steel Table Clamp

This VEVOR is the cast iron traditionalist of the group: a heavy-duty cast iron body in a #8 caliber, fixed by a 304 stainless steel table clamp whose opening range the maker lists as 0.39 to 1.38 inches, narrower than the clamps on the stainless models here.

The maker lists 5 mm and 8 mm cutting plates and one cutting blade, so the 8 mm plate covers a coarse first grind and the 5 mm plate the finer pass. Three plastic sausage tubes and a meat pusher come in the box. The maker lists grinding beef, pork, fish and chicken racks, plus low-moisture vegetables such as mushrooms and peppers, which tells you the stated workload: steady home batches rather than commercial volume.

The specification block lists a weight of 5.6 pounds and overall dimensions of 4.2 inches high by 6.3 inches wide, so this is a compact iron unit that stores easily. The maker recommends drying the cast iron grinder thoroughly before storing it, which is the standing care rule for this pick. Buy it if you want cast iron weight and a simple two-plate setup. Skip it if your benchtop is thicker than 1.38 inches, because the clamp range is the tightest in this set, or if a #8 head feels small for the volume you grind.

Huanyu Manual Meat Grinder (WJJ-191b)

The Huanyu is the compact stainless option: the listing describes a heavy-duty stainless steel body built with precision one-piece casting and mirror polishing, held down by two methods at once, an adjustable stainless steel table clamp and a strong suction cup.

That double fixation is its distinguishing fact. The clamp fits tabletops from 0.39 to 1.97 inches thick, the widest clamp range in this guide, and the suction cup adds a second hold on smooth surfaces, which helps when bench space at a camp table or a small kitchen counter is thin and light. The listing gives an item weight of 5.72 pounds and package dimensions of 9.06 by 8.23 by 7.01 inches, so it packs and stores like a kitchen tool rather than a bench fixture.

The maker lists grinding beef, pork and chicken racks, and low-moisture vegetables like mushrooms and peppers, and includes two stainless steel sausage stuffer tubes. The maker also lists dishwasher cleaning for the parts. Its honest limit is printed by omission: the listing does not state the grinding plate hole sizes, so a buyer who needs a stated coarse plate for game work cannot confirm one from this page. Buy it for compact stainless grinding and stuffing on varied tabletops. Skip it if a printed coarse plate size is a requirement for your game processing.

Gefu Transforma Meat Mincer

The Gefu Transforma closes the set as the light-duty mincer: its listing describes a manually operated mincer with coarse and fine grinding plates for meat, fish and vegetables, a stuffer attachment for making homemade sausages, and a spritz biscuit attachment with five designs.

Its mounting is the flexible part of the design. The base has a suction foot for stability and an extra-high table clamp of up to 8 cm, and the listing notes high base clearance that lets you place high-rimmed bowls underneath to catch the ground food. The food pusher doubles as a spanner for tightening or loosening the lock nut, a small detail that matters when hands are slick during processing.

Set against the game brief, this is a trim-and-small-batch tool: the listing states no plate hole sizes, no head size and no weight, so none can be claimed here. It suits grinding a small pile of venison trim for a single meal, or stuffing a few links, rather than working through a whole animal. Buy it if your game grinding is occasional and small, and the biscuit attachment earns its shelf space the rest of the year. Skip it as your only grinder if a full deer is the plan.

Buying guide

Choosing among hand grinders for game work comes down to four stated facts: the coarse plate size, the head size, the body material and the clamp range. The sections below walk through each one using only the figures the makers in this guide print, plus general points that carry no numbers at all.

Head size and coarse plates in meat hand grinders for wild game

Start with the plate, because the plate decides the texture of the first grind. A coarse plate in the 8 to 10 mm range, or 3/8 inch as LEM prints it, passes game trim in larger pieces and keeps the auger from working against a fine screen on the first pass; a finer plate then sets the final texture.

Head size is the second figure. The number in a grinder name, #8, #10 or larger, describes the size of the grinding head, and a larger head generally pairs with a wider throat and plates. In this set the #10 models from Weston and LEM sit above the #8 VEVOR cast iron model on that scale, which is why the #10 pair leads the guide for whole-animal work.

Check that both a coarse and a fine plate are in the box before you count on a two-pass grind. Four of the five picks here list two plates; the Huanyu lists two stuffing tubes but does not print its plate sizes, so treat its grind range as unconfirmed and weigh that against its mounting advantages.

Cast iron or stainless steel for a hunting-season grinder

Body material decides how the grinder lives between seasons. Cast iron, as in the Weston and the VEVOR iron model, brings working weight that steadies the unit under cranking, and both makers pair it with a finish, a tin coating on the Weston and a dry-before-storing instruction on the VEVOR.

Stainless steel, as in the LEM, the Huanyu and the stainless VEVOR models in the wider market, trades some of that heft for easier washing and storage; LEM describes its polished stainless as rust resistant, and Huanyu lists dishwasher cleaning. Neither material grinds better by itself; the difference shows up in the wash-up and in how the unit looks after a year in a cupboard.

Match the material to your habits. A grinder that gets washed, dried and put away the same day suits cast iron well. A grinder that may sit damp after a long processing day, or that travels to a camp kitchen, suits stainless steel better.

Clamp fit and bench space at camp or at home

A hand grinder is only as steady as its mount, so measure your bench edge before choosing. The clamps in this set span stated ranges from 0.39 to 1.38 inches on the VEVOR cast iron model up to 0.39 to 1.97 inches on the Huanyu, with the LEM accommodating counters up to 1 1/4 inches thick and the Gefu clamp reaching up to 8 cm.

Suction is the second hold to consider. The Huanyu pairs its clamp with a suction cup and the Gefu pairs its clamp with a suction foot; both help on smooth, thin surfaces where a clamp alone has little to bite. On thick, rough timber benches, a wide clamp range matters more than suction.

Leave room for the handle swing and for a bowl at the outlet. The Gefu listing makes the point directly with its high base clearance for high-rimmed bowls; on the other models, check that your bench lets a bowl sit under the plate before the first grind of the season.

Stuffing tubes and sausage work after the grind

Much of a game animal becomes sausage, so read the stuffing list. The LEM lists three stuffing tubes, 1/2 inch, 3/4 inch and 7/8 inch, plus a stuffing star; the Weston lists a stuffing funnel, star and flange; the VEVOR cast iron model lists three plastic sausage tubes; the Huanyu lists two stainless tubes; the Gefu lists a stuffer attachment.

Tube sizes map to casing sizes in general terms: narrow tubes suit slim sticks and small casings, wider tubes suit larger sausage. Because the makers print their tube sizes, compare the printed range with the casings you actually buy rather than assuming a tube set covers everything.

If sausage is a side task and burgers are the main event, any of these sets covers you. If linked sausage in several sizes is the goal of the season, the LEM tube range is the widest stated set in this guide.

Cleaning and storage between seasons

Game processing ends with a wash-up, and the makers state the rules that matter. The VEVOR cast iron listing recommends drying the grinder thoroughly before storing it; the Weston listing notes a protective coat on the new unit that needs a thorough cleaning before first use; the Huanyu lists dishwasher cleaning for its stainless parts.

Dry storage is the general rule that needs no number: ground meat residue and moisture are what age a grinder, so a full wash, a full dry and a dry cupboard do more for a hand grinder than any accessory. Stainless models forgive a slower routine; cast iron models repay a careful one.

Keep the plates and knife with the grinder, not loose in a drawer. Plates are model-specific more often than shoppers expect; LEM prints the warning for its own hand grinder, whose special plates and knife are the only ones that fit it.

FAQ

These answers stay inside what the five product pages state, plus general grinding practice that needs no product claim. Where a maker is silent on a point, the answer says so rather than guessing on the maker’s behalf. The questions cover whole-animal workload, plate order, bone, rust care and spare plates.

Can meat hand grinders for wild game handle a whole deer?

A whole deer is a workload question, not a power question, and none of the makers in this set prints a capacity or a pounds-per-hour figure for these hand models. On stated facts, the #10 Weston and LEM, with their coarse plates, are the pair built closest to that job in this guide.

In practice, whole-animal hand grinding is done in batches with rests, and the grind goes faster when the meat is cut small and kept cold. The Gefu sits at the other end of the set: its listing frames it as a general mincer for meat, fish and vegetables, and this guide places it as a trim and small-batch tool.

Which plate should I use first on venison?

Start with the coarse plate the maker lists, then decide whether a second, finer pass is needed. In this set that means the 10 mm Weston plate, the 3/8 inch LEM plate, or the 8 mm plate on the VEVOR cast iron model for the first grind, with the finer plates, 4.5 mm, 3/16 inch and 5 mm, held for the second pass.

A single coarse grind suits chili and stew meat; a coarse-then-fine sequence suits burgers and sausage filling. The Huanyu is the exception in this set: its listing does not state plate sizes, so its first-grind plate cannot be named from the page.

Do any of these grinders grind bone?

None of the five product pages in this guide lists bone grinding, so this guide claims it for none of them. The closest stated items are chicken racks, which the Huanyu and VEVOR listings name among the foods their grinders handle; a chicken rack is not a bone-grinding rating.

Game bones, including venison bones, are outside every stated use in this set. If bone work is part of your processing, it needs a machine whose maker prints that use, which none of these five pages does.

How do I keep a cast iron grinder from rusting?

Follow the maker’s own printed rule first: the VEVOR cast iron listing recommends drying the grinder thoroughly before storing it. The Weston listing adds that its new unit carries a protective coat to be cleaned off before first use, which is part of setting the surface up correctly.

Beyond the printed rules, the general practice is simple: wash after use, dry fully rather than air-drying in a heap, and store in a dry place. Stainless models like the LEM and Huanyu ask less here, which is their main ownership advantage.

Are replacement plates easy to find?

It depends on the model, and one maker in this set prints the key warning: LEM states that standard LEM grinder knives and plates will not work with its #10 stainless hand grinder, which takes its own special plates, listed as 10 mm and 4.5 mm, and its own knife.

For the other models, the pages do not print a replacement-parts promise, so the practical step is to buy any spare plate or knife at the same time as the grinder, matched to the model name and head size, rather than assuming plates swap between brands or sizes.

Conclusion

For wild game at home, pick on stated plates and head size: the Weston #10 for its 10 mm coarse plate and stuffing funnel, the LEM #10 for stainless steel and three stuffing tubes, the VEVOR cast iron #8 for iron weight, the Huanyu for compact double mounting, and the Gefu Transforma for small trim batches and links.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.