Updated Nov 15, 2026· 15 min read

Key takeaways

  • Five meat manual grinders for wild game compared on stated caliber, plates, clamp ranges and steel builds, from a #12 caliber head down to compact #8 models.

Manual grinding suits game processing because the crank answers to the meat in front of you, batch by batch, so this guide compares meat manual grinders for wild game on the facts makers print: stated caliber, plate sizes, clamp ranges, body materials and the parts included in the box for grinding and stuffing.

Quick verdict

For most home game processors, the VEVOR #12 caliber stainless model is the strongest starting point in this set, because its listing states the largest head size here, a #12 caliber, with 5 mm and 8 mm cutting plates, a cross blade and a stainless steel sausage tube in the box.

The Weston #10 is the cast iron pick: tin plated cast iron, a clamp-on body, and two face plates listed for medium and coarse grinding at 4.5 mm and 10 mm. The LEM #10 Stainless is the all-stainless pick, with a coarse 3/8 inch plate, a fine 3/16 inch plate and three stuffing tubes. The second VEVOR clamp model is the measured middle option, the only one here with a printed weight and dimensions, 6 lbs and 3.1 by 7.5 by 11.2 inches. The VEVOR #8 caliber model with suction cup plus clamp is the pick for thin or smooth benches, with dual fixation and the same 5 mm and 8 mm plate pair.

One limit shapes the whole set. None of the five makers prints the words wild game or deer on these product pages, and none prints a throughput rate for a hand crank model. The game fit below rests on stated facts only: caliber, coarse plate sizes, heavy-duty body builds and stuffing gear for game sausage.

Product Type Best for Key spec Main limit
VEVOR Manual Meat Grinder, 304 Stainless Steel Hand Meat Grinder with Steel Table Clamp, Meat Mincer Sausage Maker & 2 Cutting Plates Stainless steel #12 clamp-on Largest stated head size in this set #12 caliber, 5 mm and 8 mm plates, stainless sausage tube Weight and dimensions not stated on its page
Weston #10 Manual Tinned Meat Grinder and Sausage Stuffer (36-1001-W) Tin plated cast iron clamp-on Coarse first grinds in cast iron Two face plates, 4.5 mm and 10 mm, for medium and coarse grinding Cast iron needs drying and care between seasons
LEM #10 Stainless Steel Clamp-On Hand Grinder All stainless steel clamp-on Stainless build with three stuffing tubes Coarse 3/8 inch and fine 3/16 inch plates Only its own special plates and knife fit
VEVOR Manual Meat Grinder, 304 Stainless Steel Hand Meat Grinder with Steel Table Clamp, Meat Sausage Maker with 1 Cutting Blade, 2 Cutting Plates, Sausage Tube for Beef Pork Stainless steel clamp-on Readers who want printed dimensions and weight 6 lbs, feed inlet 3.3 inches, plates 5 mm and 8 mm Its page does not print a caliber size
VEVOR Manual Meat Grinder, 304 Stainless Steel Hand Meat Grinder with Suction Cup + Steel Table Clamp, Meat Mincer Sausage Maker & 2 Cutting Plates Stainless steel #8, suction plus clamp Thin or smooth benches needing two holds #8 caliber, clamp 0.79 to 1.97 inches plus suction cup Smallest caliber in this set

How we selected

Each grinder in this guide had to show, on its maker or listing page, the facts a game processor actually compares: a stated caliber or head size, stated plate sizes, a stated clamp range, and a body build the maker describes as heavy-duty. Models whose pages printed none of that were left out of the set.

Caliber led the selection because it is the one size figure manual grinders print consistently. The set runs from a stated #12 caliber down to a stated #8, with two #10 models between them, and the order below follows that ladder. A larger caliber pairs with a wider head and plates, which is the direction game work pushes, since trim arrives in volume and the first grind runs coarse.

Plates were the second filter. Every pick here lists an 8 mm plate, a 10 mm plate, or a 3/8 inch plate for the coarse pass, and a 5 mm, 4.5 mm or 3/16 inch plate for the finer pass, so a two-stage grind is possible with parts in the box. Fixation was the third filter: all five clamp to a table, with stated ranges, and one adds a suction cup as a second hold.

Honesty limits were applied as firmly as the spec filters. No page in this set states a game claim, a deer claim, a bone claim or a grinding rate, so the guide claims none of them. Where a figure is missing, such as the weight of the #12 model, the product notes say the page does not state it.

Meat manual grinders for wild game, one by one

Five manual grinders follow, ordered by stated caliber from the largest head to the smallest. Each entry gives the plate sizes, clamp range, body material and box contents its page states, and the limit that matters most for game work, so the comparison rests on print rather than promise.

VEVOR Manual Meat Grinder, 304 Stainless Steel Hand Meat Grinder with Steel Table Clamp, Meat Mincer Sausage Maker & 2 Cutting Plates

This VEVOR leads the set on the figure game processors ask about first: its listing states a #12 caliber, the largest head size among the five, and describes all parts made of food-grade stainless steel in one piece casting with a fine mirror polishing.

The plate pair is 5 mm and 8 mm, with one cutting cross blade, so the 8 mm plate takes the coarse first pass on game trim and the 5 mm plate the finer second pass. The box adds a stainless steel sausage tube, a cookie attachment, a push rod and a cleaning brush, per the maker’s package list. The cookie attachment is a general kitchen extra; the sausage tube is the piece that earns its place on a game day.

Fixation is a 304 stainless steel table clamp with a stated opening range of 0.39 to 1.97 inches, the joint widest range in this set, which covers thin camp tables and thick kitchen counters alike. The maker lists grinding beef, pork, fish and chicken racks, plus low-moisture vegetables like mushrooms and peppers. The page does not state the unit’s weight or dimensions, so neither is claimed here. Buy it if the largest stated caliber in a stainless body is your priority. Skip it if you need a printed weight before buying, because this page does not give one.

Weston #10 Manual Tinned Meat Grinder and Sausage Stuffer (36-1001-W)

The Weston #10 is the cast iron entry, and its listing leads with grind texture: two face plates for medium and coarse grinding, 4.5 mm and 10 mm, in a hand-cranked, tin plated cast iron body that clamps to a table or countertop in the kitchen or at camp.

The 10 mm plate is the coarsest single plate stated in this guide, which suits a first pass on venison trim before any finer grind. A heavy-duty nylon auger bearing is the internal part the maker names. The listing notes the unit arrives with a protective coat that needs a thorough cleaning before use, standard preparation for coated cast iron.

Sausage gear is part of the stated package: a stuffing funnel, star and flange come with the grinder, so the same machine that grinds the trim can stuff it. Buy the Weston if you want cast iron weight, the coarsest stated plate and a stuffing funnel in the box. Skip it if your routine will not include drying and careful storage, because a tin plated iron body asks for both in a way stainless steel does not.

LEM #10 Stainless Steel Clamp-On Hand Grinder

The LEM #10 is the all-stainless #10 in the set: the maker describes a heavy-duty, all stainless steel construction, clamp-on style hand grinder, highly polished, and lists two stainless steel plates, coarse 3/8 inch and fine 3/16 inch, with a stainless steel knife.

That plate pair maps cleanly onto game work: the 3/8 inch coarse plate for the first pass, close in size to a 10 mm plate, and the 3/16 inch fine plate for a burger-style second pass. The stuffing list is the widest in this guide: three stuffing tubes at 1/2 inch, 3/4 inch and 7/8 inch, plus a stuffing star, covering slim sticks through larger sausage casings.

The clamp accommodates counters up to 1 1/4 inches thick, a narrower stated range than the VEVOR clamps here, so measure a thick bench before choosing it. The maker describes the polished stainless as easy to clean and rust resistant. One printed limit matters for owners: standard LEM grinder knives and plates will not work with this hand grinder, which takes its own special plates, listed as 10 mm and 4.5 mm, and its own knife. Buy it for stainless storage and the widest tube set. Skip it if you planned to share plates with another grinder.

VEVOR Manual Meat Grinder, 304 Stainless Steel Hand Meat Grinder with Steel Table Clamp, Meat Sausage Maker with 1 Cutting Blade, 2 Cutting Plates, Sausage Tube for Beef Pork

This VEVOR clamp model is the specification sheet of the set: its listing prints the fullest figure list here, including a product weight of 6 lbs, dimensions of 3.1 by 7.5 by 11.2 inches, a feed inlet diameter of 3.3 inches and a handle length of 6.9 inches.

The working parts match the other stainless models: all parts of 304 food-grade stainless steel, plates of 5 mm and 8 mm with the 8 mm plate pre-installed, one cutting blade, and a sausage stuffing tube of 0.9 inch. The package adds a cleaning brush, a meat pusher and a PA shaft sleeve as a spare. The maker lists grinding pork, beef, chicken, fish and vegetables including onion, pepper, potato and mushroom, plus peanut.

Its clamp opens from 0 to 1.8 inches and carries nonslip rubber pads, and the listing notes the pads help stability during cranking. One honest gap: this page does not print a caliber size for the grinder, so it sits mid-set on stated facts rather than on a claimed head size. Buy it if printed dimensions and weight matter to your bench planning. Skip it if a stated caliber is the figure you compare by, because the #12 and #8 models here print theirs and this one does not.

VEVOR Manual Meat Grinder, 304 Stainless Steel Hand Meat Grinder with Suction Cup + Steel Table Clamp, Meat Mincer Sausage Maker & 2 Cutting Plates

The second VEVOR in this set is the dual-fixation model: its listing states a #8 caliber, the smallest head in this set, held by two methods at once, a bottom suction cup and a 304 stainless steel table clamp with an opening range of 0.79 to 1.97 inches.

The grind set matches its larger sibling: 5 mm and 8 mm cutting plates, one cutting cross blade, a stainless steel sausage tube, a cookie attachment, a grinding head, a meat pusher rod and a cleaning brush, all in food-grade 304 stainless steel built with one piece casting, as the maker describes it. The maker lists beef, pork, fish and chicken racks, and low-moisture vegetables such as mushrooms and peppers.

For game work this is the small-batch end of the caliber ladder: a #8 head suits trim, small batches and a second grinder role rather than a whole animal in one session. Its advantage is the mount, since the suction cup grips smooth surfaces where a clamp alone has little edge to hold. Buy it for flexible mounting and stainless construction at the compact end. Skip it as your only grinder if whole-deer volume is the plan, and choose the #12 model instead.

Buying guide

Comparing manual grinders for game work is mostly a matter of reading four printed figures in order: caliber, plate sizes, clamp range and the box contents. The sections below use only the figures stated for the five models in this guide, plus general practice that carries no product claim.

Reading caliber in meat manual grinders for wild game

Caliber, printed as #8, #10 or #12 in these listings, is the maker’s size grade for the grinding head. In this set the ladder runs #12, #10, #10, then #8, and the product order above follows it, because a larger head is the direction to lean when the season’s work is measured in whole animals.

A larger caliber does not come with a printed speed. None of these five pages states a pounds-per-hour or pounds-per-minute rate, so any claim that a #12 grinds a set amount faster than a #10 would be a guess; the honest statement is that the head and plates are larger, and the rest depends on the meat, its temperature and the person cranking.

Match caliber to your real batch size. A hunter grinding trim and a few pounds at a time is served by a #8 or #10; a household that processes several deer each season should start the comparison at the #12 end of this set.

Plates and the two-pass grind

Every model here ships with two plates, and the pair is the working system: a coarse plate for the first pass and a finer plate for the second. The stated coarse options are 10 mm on the Weston, 3/8 inch on the LEM and 8 mm on the three VEVOR models; the stated fine options are 4.5 mm, 3/16 inch and 5 mm.

Run game trim through the coarse plate first. A fine plate asked to do the first pass on cold, sinewy trim makes the crank work harder and smears fat; a coarse first grind keeps the pieces defined, and the fine pass then sets the texture for burgers or sausage filling.

Check the box list before assuming a stuffing tube is included. All five models here list one, but the Weston calls its piece a stuffing funnel with a star and flange, while the LEM lists three separate tubes; the wording differs because the parts differ.

Clamp ranges and steady cranking

A manual grinder under load tries to walk, so the clamp figures deserve the same attention as the plates. The stated ranges here run from 0.39 to 1.97 inches on the #12 VEVOR, 0.39 to 1.97 inches on the #8 dual-fixation VEVOR, 0 to 1.8 inches on the measured VEVOR, and up to 1 1/4 inches on the LEM.

Measure the edge you will actually use, at the hunting camp table as well as the home counter, because a clamp that fits one may not fit the other. The dual-fixation #8 model adds a suction cup, which helps on smooth, thin surfaces; on thick timber, clamp range is the figure that decides.

Rubber pads appear in this set on the measured VEVOR’s clamp, where the maker ties them to stability and lower noise. Pads or not, a steady mount is what lets the crank turn at an even pace, and an even pace is what keeps a coarse grind even.

Stainless steel or tin plated cast iron

Four of the five models here are stainless steel, three of them described by their maker as one piece casting in 304 food-grade stainless, and the LEM described as all stainless steel construction. Stainless is the low-maintenance route: wash it, dry it, store it, and the polished finish the makers describe resists rust between seasons.

The Weston is the exception, a tin plated cast iron body. Cast iron brings bench weight that steadies the unit, and the tin coating is its printed finish. The trade is care: the listing’s own note about cleaning off a protective coat before first use signals the routine iron asks for, including full drying before storage.

Neither material changes the grind itself, since plates and knives do that work. Choose stainless for travel and easy storage, and cast iron if you value the weight and accept the drying routine that comes with it.

What the box contents change on processing day

The package lists in this set differ in ways that matter once meat is on the table. Two of the VEVOR models here include a cookie attachment, which is a general kitchen extra, and a cleaning brush, which is not: a brush sized for the head and plates speeds the wash-up that game work makes long.

Pushers and spare parts count too. The measured VEVOR lists a meat pusher and a spare PA shaft sleeve; the #8 model lists a meat pusher rod; the LEM and Weston cover the pusher role through their stuffing stars and funnels. A pusher keeps hands back from the throat while the auger is turning, which is basic grinding practice on any model.

Read the box list against your own kit. If you already own tubes and brushes in the right sizes, the simpler packages lose nothing; if you are starting from an empty drawer, the fuller VEVOR and LEM lists close more gaps on day one.

FAQ

These answers stay inside what the five product pages state, plus general grinding practice that needs no product claim. Where a maker prints no figure, the answer says so plainly instead of estimating one on the maker’s behalf, which matters most on the speed question below.

What is the largest head size among meat manual grinders for wild game in this guide?

The largest stated head size here is the #12 caliber of the VEVOR stainless clamp model, followed by the two #10 models, the Weston and the LEM, and then the #8 caliber of the dual-fixation VEVOR. Caliber is the maker’s printed size grade for the grinding head.

Larger is a direction, not a promise. The #12 pairs its head with 5 mm and 8 mm plates, the same plate pair as the #8 model, so the difference between the ends of this set is the head and throat size, not the grind textures on offer.

How fast can a manual grinder process a deer?

No maker in this set prints a rate, so this guide gives none. There is no pounds-per-hour or pounds-per-minute figure on any of the five pages, for any caliber, and a number borrowed from an electric grinder would not describe a hand crank tool in any case.

What the pages do support is the workload order: the #12 and #10 models, with coarse plates of 8 mm, 10 mm and 3/8 inch, are the picks aimed at larger batches, while the #8 model is framed by its own listing as a general meat grinder for home-scale foods.

Can I bolt one of these grinders to a bench?

On the pages behind this guide, all five models state clamp fixation, and none of the five product pages states a bolt-down mounting option. The Weston clamps to a table or countertop per its listing; the VEVOR and LEM models clamp per theirs as well.

If a permanent bench mount is a requirement, treat it as a separate search rather than an assumption, because a clamp body and a bolt-down body are built differently at the base. Within this set, the widest clamp ranges, up to 1.97 inches, are the closest answer to a fixed station.

Do any of these manual grinders grind bone?

None of the five pages lists bone grinding, so this guide claims it for none of them. The nearest stated foods are chicken racks, named by the VEVOR listings among the meats their grinders handle; chicken racks are a stated food, not a bone rating of any kind.

Venison bones and other game bones sit outside every stated use in this set. Bone work needs a machine whose maker prints that use on the product page, and no page here does.

Which of these is easiest to store between seasons?

On stated facts, the stainless models ask the least: their makers describe polished, rust resistant stainless steel, and the measured VEVOR gives the storage footprint directly at 3.1 by 7.5 by 11.2 inches and 6 lbs, the only printed dimensions and weight in the set.

The cast iron Weston asks for the most care, since iron needs full drying before it goes away. The #12 and #8 VEVOR pages do not state weight or dimensions, so their storage size cannot be compared from print; that gap is worth knowing before you buy around a small cupboard.

Conclusion

Choose by caliber first: the VEVOR #12 for the largest stated head in stainless steel, the Weston #10 for cast iron and a 10 mm coarse plate, the LEM #10 for three stuffing tubes, the measured VEVOR clamp model for printed dimensions and weight, and the dual-fixation #8 for thin benches and small batches.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.