Key takeaways
- Five meat grinders for venison compared on maker-stated rates and plate sets, from a home #12 at 180 to 240 pounds per hour to a one-pass dual grind #22 head.
Venison arrives in batches that mix burger meat, sausage blends and stew cuts, and each texture asks something different of a grinder and its plates. These meat grinders for venison were picked on stated rates, head size and plate sets, with venison named outright on three of the five maker pages read for this list.
Quick verdict
The LEM BigBite #22 leads on the maker’s own words and numbers together: its copy names venison, and its stated average of 13 pounds per minute is the fastest per-minute figure here. The MEAT! Dual Grind answers a different need, folding a coarse and fine grind into a single pass.
- For venison named with the fastest stated pace: LEM BigBite #22 Meat Grinder, at an average of 13 lbs per minute.
- For venison named with plates stated in millimeters: VEVOR #12 Commercial Electric Meat Grinder, 750W, at 9.2 lbs per minute.
- For two grinds in one pass: MEAT! 1 HP Dual Grind Grinder (#22), with coarse or fine finished in the same throat.
- For the fullest home accessory kit: STX Turboforce Classic 3000 Series, at 180 to 240 lbs of meat per hour.
- For two speeds and a slow stuffing gear: Weston Pro Series #12 Electric Meat Grinder, at 4 to 5 pounds per minute.
Three pages name the meat itself: the LEM and VEVOR copies list venison, and the Weston copy lists venison among its meats. The other two picks rest on stated rates, head size and plate sets.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| LEM BigBite #22 Meat Grinder | #22 electric grinder | Venison named, fastest pace | Average 13 lbs per minute; plates at 3/16 and 3/8 inch | At 65 lbs it wants a settled bench |
| VEVOR #12 Commercial Electric Meat Grinder, 750W | #12 electric grinder | Venison named, exact plates | 9.2 lbs per minute; plates at 6mm and 8mm | Commercial build, plainer accessory set |
| MEAT! 1 HP Dual Grind Grinder (#22) | #22 electric grinder | Two grinds in one pass | Coarse or fine secondary plate in the same throat | No throughput figure stated by the maker |
| STX Turboforce Classic 3000 Series | #12 electric grinder | Fullest home accessory kit | 180 to 240 lbs per hour; four plates plus stuffing plate | Maker states it will not grind bones |
| Weston Pro Series #12 Electric Meat Grinder | #12 electric grinder | Two speeds, venison named | 4 to 5 lbs per minute; plates at 5mm and 8mm | Slowest stated rate here |
How we selected
Selection rested on printed statements, not brand reputation: a maker’s own venison wording where a page carries it, and stated throughput, head size and plate sets everywhere else. Three models carry the meat wording outright; the other two post a one-pass grind design and an hourly rate in the #12 class.
Rates arrive in two dialects on these pages, pounds per minute and pounds per hour, and the entries quote each figure as printed rather than converting it. The per-minute band runs from 4 to 5 pounds on the Weston to an average of 13 on the LEM, and one maker states no rate at all.
Plate sets carried weight beside output: a stated coarse and fine pair, in inches or millimeters, counted for more than a plate count alone. Stuffing gear counted too, because venison season usually ends with sausage, snack sticks and summer sausage on the plan.
Build rounded out the criteria: stainless heads and plates, stated weights, and the limits makers print about their own machines. One pick states plainly that it will not grind bones, and that honesty is recorded in its entry rather than smoothed over.
The meat grinders for venison, model by model
The five models below run from a two-speed home #12 to a #22 that finishes two grinds in one pass. Each entry sticks to what the maker states: venison wording where it exists, output figures, plate sets, included parts, and the limits printed beside them.
LEM BigBite #22 Meat Grinder
LEM names the meat in its own copy: the listing describes grinding game meat like venison or elk. The stated pace matches the wording, an average of 13 lbs per minute from a 1 HP, 750 watt motor on 120V at 10 amps, the fastest per-minute figure on this list and the natural lead pick for venison.
The plate set is stated in inches: stainless plates at 3/16 inch and 3/8 inch, a coarse and fine pairing that covers the standard venison run from chili meat to burger blends. A 3 inch throat takes the pieces a deer breaks down into without fine cubing first, which shortens the knife work before the grind.
The supporting figures are a 65 lb weight, dimensions of 12 x 22.5 x 19 inches, ETL certification and a five-year warranty, the longest term stated here. The limit is the bench: at 65 lbs this #22 lives where it lands, and the page lists plates without a stated tube set, so stuffing gear is thinner on paper than its rivals.
- Pro: Maker names venison in its own copy
- Pro: Fastest stated pace here, an average of 13 lbs per minute
- Pro: Five-year warranty and a 3 inch throat
- Con: At 65 lbs it is a settled bench machine
- Con: No stuffing tube set stated on the page
Buy if you want the maker’s venison wording with the fastest stated pace and a long warranty. Skip if the machine must travel between storage and counter, or if a stated tube set matters for your sausage plans.
VEVOR #12 Commercial Electric Meat Grinder, 750W
VEVOR names the meat on its own page: the compatible meat list runs chicken, pork, beef, fish and venison. The stated rate is 4.2 kg per minute, printed on the page as 9.2 lbs per minute, from a 750W, 1 HP motor wound with pure copper, driving a 3-stage auger through a #12 head.
The plate pair is stated in millimeters, a 6mm plate for finer grinds and an 8mm plate, pre-installed, for coarser work, and the kit adds a kibbe attachment and three sausage stuffing tubes at 8mm, 10mm and 20mm. That spread covers burger blends, coarse sausage mixes and the small tubes snack sticks ask for.
Two working details stand out on the page: a rapid cold-air cooling system that moves air through the motor during long sessions, and anti-vibration foot pads at the base. The unit measures 15.75 x 7.68 x 15 inches at 36.6 pounds, carries an ETL listing, and the maker lists parts for dishwasher cleaning. The limit is positioning: a commercial build with a plainer finish than the home brands.
- Pro: Maker lists venison among its compatible meats
- Pro: Plates stated at 6mm and 8mm, tubes at 8mm, 10mm and 20mm
- Pro: Cold-air cooling for long grinding sessions
- Con: Slower stated rate than the #22 picks
- Con: Commercial styling suits a work bench more than a home counter
Buy if you want venison named with every plate and tube size printed, in a compact commercial #12. Skip if your batches have grown into #22 territory, or if home styling and a long stated warranty matter more.
MEAT! 1 HP Dual Grind Grinder (#22)
The Dual Grind answers the two-pass problem directly: a stainless steel first grinding plate pairs with a choice of coarse or fine secondary plate in the same throat, so one pass produces the finished texture. For venison burger meat, that design removes the reload, regrind and second handling that a standard head asks for.
The rest of the stated kit suits the same workflow: stuffing horns for sausage work, an accessory tray that keeps plates and parts organized at the bench, and a durable carrying handle on a 1 HP, #22 machine. The maker also offers a foot pedal switch as a companion accessory for hands-free running.
The honest gap is output: the maker’s page states no throughput figure and no plate sizes in millimeters, and this entry borrows neither from review pages. A buyer who plans the day around a stated rate cannot do it from this page, and the pick rests on the one-pass design and the #22 class instead.
- Pro: Coarse or fine grind finished in a single pass
- Pro: Stuffing horns and an accessory tray included
- Pro: A #22 head from a game-processing brand
- Con: No throughput figure stated by the maker
- Con: Plate sizes not stated in millimeters
Buy if your venison routine is two-pass grinding and you want that handling gone in a #22 body. Skip if a stated pounds-per-minute figure guides your planning, because this page offers none to plan with.
STX Turboforce Classic 3000 Series
The STX Classic is the home-kit pick: a #12 grinding head, a stated rate of 180 to 240 lbs of meat per hour on high, and the deepest accessory box on this list. The motor carries a locked wattage of 3000 watts and normally uses between 800 watts and 1200 watts under load, per the maker’s own wording.
Texture control is the strength. Four grinding plates plus a sausage stuffing plate, three stainless steel cutting blades, and an AVI auger that pulls meat through a feeder opening of over 2 inches cover the venison range from coarse chili grind to fine burger blends. The meat tray measures 9.75 x 7.25 x 2 inches and holds over 3 lbs at a time.
Controls run to three speeds, low for stuffing, high for grinding and reverse, with a stop and reset switch and a circuit breaker. Tubes at 3/4 inch, 5/8 inch and 1/2 inch, a kubbe attachment, meat claws and a burger-slider press fill the box. The maker states the limits plainly: this grinder will not grind bones, and it is built for home use, not commercial work.
- Pro: 180 to 240 lbs per hour with four plates plus a stuffing plate
- Pro: Three speeds, with a low speed assigned to stuffing
- Pro: Deepest accessory kit here, from kubbe to burger press
- Con: Maker states it will not grind bones
- Con: Home use only, per the maker, not a commercial unit
Buy if your venison work is home-scale and you want one box that grinds, stuffs and presses burgers. Skip if you need commercial duty or any bone work, because the maker rules both out in its own text.
Weston Pro Series #12 Electric Meat Grinder
Weston names the meat outright: its copy lists venison among the meats this #12 handles, beside beef, chicken, turkey and bison. The stated pace is 4 to 5 pounds per minute from a 750-watt, 1 hp motor, the slowest figure on this list and the one aimed at steady home sessions rather than long lines of trays.
The venison fit is control rather than speed. Two speeds plus reverse give a fast grind gear and a slower first speed the maker assigns to stuffing, so the machine that grinds the deer also fills casings at a pace casings can take. The plate pair is stated in millimeters: medium and coarse plates at 5 mm and 8 mm in stainless steel.
The build is die-cast aluminum with metal gears and a cam action headlock, and the box carries two grinding plates, a cutting blade, a sausage stuffing funnel, a stuffing spacer and a stomper. The honest limit is throughput: across a full animal plus a sausage batch in one day, the crew waits on this grinder more than on any other pick here.
- Pro: Maker lists venison among the stated meats
- Pro: Two speeds plus reverse, with a slow speed assigned to stuffing
- Pro: Plates stated at 5 mm and 8 mm in stainless steel
- Con: Slowest stated rate here, at 4 to 5 pounds per minute
- Con: A #12 head, so big days take more loads than a #22
Buy if your venison work is one animal at a time and you want stuffing control in the same unit. Skip if several animals land on the same day and stated pace matters more than the second speed.
Buying guide
A venison grinder purchase turns on three stated facts: the output figure, the plate set and the head size. Read those three lines on any maker’s page first, and let the way you actually cook venison, burgers first or sausage first, set which of the three matters most for the machine that comes home.
Throughput in two dialects: per minute and per hour
Makers state venison pace two ways on these pages. LEM and VEVOR quote pounds per minute, an average of 13 and 9.2 respectively, while STX quotes 180 to 240 lbs per hour and Weston 4 to 5 pounds per minute. Compare figures inside one dialect, and treat any conversion of your own as a rough guide only.
The MEAT! Dual Grind page states no rate at all, which is itself a buying fact: its case rests on saving a pass rather than posting a pace. A buyer with a fixed processing crew and a fixed day should weigh a stated figure more heavily than a design claim.
Head size: the #12 home class and the #22 step up
Three of the five picks wear #12 heads, the home and light commercial class, and two wear #22 heads. The #12 case is counter fit and lighter bodies, 36.6 pounds on the VEVOR and a tray that holds over 3 lbs on the STX. The #22 case is load size: fewer, larger loads across a whole animal.
Throat figures sharpen the split. The LEM states a 3 inch throat and the STX a feeder opening of over 2 inches, and larger openings take larger pieces, which shortens cubing. Where a maker states no opening figure, plan on smaller pieces and a slower feed.
Plate sizes and textures for meat grinders for venison
Venison cooking splits by texture: coarse grinds for chili and stew meat, fine grinds for burgers, and seasoned mixes for sausage. The stated pairs here cover that range two ways, in inches on the LEM at 3/16 and 3/8, and in millimeters on the VEVOR at 6mm and 8mm and the Weston at 5 mm and 8 mm.
The STX widens the field with four grinding plates plus a stuffing plate, the most stated texture steps here. The Dual Grind takes the other route, finishing coarse or fine in one pass. A cook who grinds to written recipes should favor the pages that print their plate sizes.
One pass or two: the dual grind question
Standard heads take texture in runs: a coarse pass, then a fine pass for burger meat, with the meat handled twice. The Dual Grind #22 folds both runs into one pass through two plates in the same throat, which cuts the handling on exactly the batches venison cooks repeat most.
Separate runs keep one advantage: the cook can season, mix or split the batch between passes, holding part at coarse for chili and finishing the rest fine. The workflow choice shapes processing day as much as the headline figure does.
Stuffing gear, tubes and the end of the season
Venison season usually ends at the stuffer, and the stated kits differ more than the grinders do. STX lists tubes at 3/4 inch, 5/8 inch and 1/2 inch with a kubbe attachment, VEVOR lists tubes at 8mm, 10mm and 20mm with a kibbe kit, and Weston includes a funnel and spacer with its slow speed.
The MEAT! page lists stuffing horns, and the LEM page lists plates without a stated tube set. A buyer whose season ends in snack sticks should compare tube sizes first, because the smallest stated tubes, not the motors, decide that job.
Trays and storage close the day out. The STX meat tray holds over 3 lbs of meat at a time, which sets the loading rhythm on a home counter, and the MEAT! accessory tray keeps plates and horns together at the bench. Parts that live with the machine start the next batch faster, because nothing waits on a drawer search.
FAQ
Most questions about venison grinders come back to stated rates, stated plates and which makers print the word venison at all. The answers below stay inside those printed lines, model by model, so the figures quoted here match the figures in the entries above them.
How fast do meat grinders for venison need to be?
Match the stated figure to the largest day you face. The 4 to 5 pounds per minute on the Weston covers one animal at a steady pace, 9.2 on the VEVOR and an average of 13 on the LEM suit longer days, and the STX states its pace per hour at 180 to 240 lbs for home batches.
Every figure assumes steady feeding of trimmed, cubed meat. Once the grinder outruns the knives, extra stated pace stops shortening the day, which is why the mid-range figures satisfy most home seasons.
Which models name venison on their pages?
Three do. The LEM copy describes grinding game meat like venison or elk, the VEVOR page lists venison among its compatible meats, and the Weston copy lists venison beside beef, chicken, turkey and bison. Those three pages carry the meat in the maker’s own words.
The MEAT! Dual Grind and the STX Classic print no venison wording on the pages read for this list. Their places rest on the one-pass grind design, stated rates, head class and plate sets.
Can these grinders grind bones?
Only one page addresses the question, and its answer is no: the STX maker states in capital letters that this grinder will not grind bones, and positions the unit for home use. That limit is printed in the product description, not buried in a manual.
The other four pages state no bone capability at all. Treat bone work as unlisted for them rather than assumed, and keep venison grinding to the boneless cuts these machines are described for.
Do the picks stuff sausage as well?
Four of the five list stuffing gear on their pages. Weston includes a stuffing funnel and spacer, STX includes three tubes and a stuffing plate, VEVOR includes three tubes and a kibbe kit, and MEAT! includes stuffing horns with its dual grind head. Each set is stated on its page, not assumed.
The LEM page lists its plate pair without a stated tube set, the one gap in an otherwise full spec list. Buyers who stuff every season should weigh that gap against the LEM’s pace and warranty.
Conclusion
Venison rewards the makers who state the most: the LEM #22 names venison at an average of 13 lbs per minute, the VEVOR prints every plate and tube size, and the STX fills the home accessory box. Match the stated rate and plate set to the way you cook, and the season runs smoothly from the first batch to the last sausage run.