Updated Nov 16, 2026· 14 min read

Key takeaways

  • Compare one handle kitchen faucets with a side soap dispenser included in the box, matched finishes, and the deck-hole counts each bundle needs to install well.

A soap dispenser beside the faucet keeps bottles off the counter and soap within reach of the sink, but only if the deck has a hole for it and the finish matches. These one handle kitchen faucets with a side soap dispenser picks all include the dispenser in the box, with the mounting counts and finishes their makers state.

Quick verdict

The Kraus Sellette is the most flexible pick here: the dispenser is included in a matching Spot Free Stainless Steel finish, and the faucet installs in one, two, or three holes. The Kohler Setra counters with a top-fill dispenser, which refills from above the deck instead of under the sink.

The other three picks split by style. The Delta Essa bundle pairs a mainstream pull-down with a separate dispenser on its own single hole. The Kraus Bolden bundle brings the joint-tallest body and a brass construction note. The Kraus Britt is the commercial-style option, with an open coil spring spout and the tallest stated height range in the group.

One pattern runs through all five: the dispenser is never an afterthought bolted onto a random faucet. Each maker sells the pair as a single model or bundle, which means one box, one finish decision, and one mounting plan. That is the practical difference between this shortlist and a faucet bought first with a dispenser hunted down later, where finish codes and hole spacing have to be matched by the buyer instead of by the maker.

Product Type Best for Key spec Main limit
Kraus Sellette KPF-1680SFS-KSD-80SFS Pull-down with dispenser Most deck patterns 1, 2, or 3 hole install, 1.8 gpm Dispenser needs its own hole
Kohler Setra K-R22897-SD Pull-down with dispenser Refilling from above the deck Top-fill dispenser, 9-9/16 in reach 1.5 gpm maximum flow rate
Delta Essa bundle FVS9113-SD-DST Pull-down with dispenser Separate single-hole dispenser 1.8 gpm at 60 psi, DIAMOND valve Bundle shown in chrome on the maker page
Kraus Bolden KPF-1610SFS-KSD-43SFS Pull-down with dispenser Brass body, low outlet 1.75 gpm, 6 3/8 in spout height 180 degree swivel only
Kraus Britt KPF-1690SFS-KSD-31SFS Commercial style with dispenser Spring spout fans 1.8 gpm, 360 degree swivel Tallest design in the group

How we selected

The entry rule was the bundle itself: the maker page had to state that a soap dispenser is included with the faucet, as a combo model or a named bundle, not merely that a dispenser exists in the same product line. Each model also had to be a single-handle faucet, as the keyword asks.

Ranking then weighed the practicalities of living with a dispenser. Finish matching between faucet and dispenser came first, since a mismatched pair is the most visible failure of a bundle. Mounting range came second, because the dispenser consumes a deck hole and older decks vary. Refill style came third: a top-fill dispenser, stated on the Kohler sheet, removes the under-sink refill step entirely. Flow rate, swivel, and valve type were compared last, from the figures each page prints.

One exclusion is worth stating plainly. Faucets whose pages show a dispenser only in photographs, or whose dispenser is a separate accessory with its own model page and no bundle statement, were not counted, even when the pairing looked obvious. The keyword promises a faucet with a dispenser, and the only honest evidence for that promise is the maker’s own inclusion statement, in the box contents, the model code, or the bundle listing.

One handle kitchen faucets with a side soap dispenser: the shortlist

Five single-handle faucets with a maker-stated included dispenser made the cut. Three are Kraus combo models with the dispenser coded into the model number, one is a Kohler model whose specification sheet lists the dispenser in the box contents, and one is a Delta bundle that names both components on the bundle page.

Kraus Sellette KPF-1680SFS-KSD-80SFS

The Sellette is a single-handle pull-down sold as a combo with its soap dispenser, both in Spot Free Stainless Steel, so the finish match is settled by the maker. Kraus lists a faucet height of 17 5/8 in, a flow rate of 1.8 gpm, and a 360 degree swivel, so the spout serves a double basin while the dispenser stays parked.

The mounting range is the widest in this group: one, two, or three holes for the faucet, with the dispenser taking an additional hole. The maker lists a ceramic cartridge, metal construction, and easy-clean silicone nozzles on the spray face, described as clearing mineral deposits with a swipe. For a buyer replacing an older three-hole faucet and adding a dispenser for the first time, this combo covers the deck arithmetic in one box.

The limits are height and the extra hole itself: at 17 5/8 in the body is tall, and a deck with no spare hole cannot take the dispenser without drilling. Buy the Sellette if your deck has the holes and you want the finish match guaranteed. Skip it if the deck is already full with a sprayer and a filtration tap.

  • Pros: dispenser included in a matching finish; widest mounting range here; full swivel
  • Cons: tall body; dispenser still needs its own deck hole

Kohler Setra K-R22897-SD

The Setra’s dispenser is the thoughtful one in this group: Kohler’s specification sheet lists a top-fill soap and lotion dispenser in the box, so refills pour in from above the deck. Anyone who has refilled a bottle by feel under a sink will recognize why that single stated detail leads this model’s section.

The sheet lists a two-function pull-down sprayhead with aerated stream and Sweep spray, a spout reach of 9-9/16 in, an overall height of 15-15/16 in, and a maximum flow rate of 1.5 gpm at 60 psi. The valves are ceramic disc, the construction is premium metal, and the spray face is the maker’s MasterClean surface, described as withstanding mineral buildup. Installation covers one to four holes with the escutcheon plate included, and the finishes listed include a stainless option alongside chrome.

Two more stated details round out the Setra’s case. The sprayhead docks with the maker’s DockNetik system, which locks it into place when not in use, and the hose uses the maker’s ProMotion arrangement with a swiveling ball joint, described as making the sprayhead easier to move. On a deck where the dispenser sits beside the faucet, a wand that docks positively instead of hanging loose keeps the whole rear strip tidier.

The limit is flow: 1.5 gpm is the lowest stated rate in this group, so filling is slower than the 1.8 gpm Kraus models. Buy the Setra if refill convenience and the longest stated reach here matter most. Skip it if fill speed is your first priority.

  • Pros: top-fill dispenser; longest stated reach in the group; one to four hole installation
  • Cons: 1.5 gpm maximum flow; escutcheon look will not suit every deck

Delta Essa bundle FVS9113-SD-DST

Delta sells the Essa pull-down together with its soap and lotion dispenser as a named bundle, model FVS9113-SD-DST, and the bundle page lists both components. The dispenser mounts through a single hole of its own and stands 2-3/4 in tall above the deck, a low profile beside the faucet.

For the faucet, the bundle page lists an overall height of 15-1/4 in, a flow rate of 1.8 gpm at 60 psi, the Euromotion DIAMOND valve, and one or three hole installation on an 8 in pattern. The Essa’s own maker page adds the details a bundle summary omits: a 360 degree swivel, a 20-inch retractable hose, MagnaTite docking, and Touch-Clean spray holes that wipe clear of calcium and lime build-up with a finger.

The limit is finish scope on the bundle page opened: it presents the bundle in chrome, so a buyer set on a stainless pairing should confirm the bundle finish options on the maker page before ordering. Buy the bundle if you want a mainstream faucet and dispenser sourced as one purchase. Skip it if a coordinated stainless finish must be guaranteed in the same box.

  • Pros: named two-piece bundle from the maker; low-profile dispenser; full stated flow rate
  • Cons: bundle page shows chrome; dispenser hole is separate from the faucet pattern

Kraus Bolden KPF-1610SFS-KSD-43SFS

This Bolden combo pairs the Bolden pull-down with a coordinating soap dispenser, both in Spot Free Stainless Steel. Kraus lists solid brass construction with a stainless steel spout, a flow rate of 1.75 gpm on this combo page, an overall height of 18 in, a spout height of 6 3/8 in, and a reach of 8 3/4 in, the second-longest reach in this group.

The valve is a ceramic cartridge, the spray face carries easy-clean nozzles, and the single handle rotates 90 degrees forward, which helps on a crowded deck where the dispenser and the handle both sit near the backsplash. The swivel is 180 degrees, enough to sweep a double basin from a center mount while the dispenser waits at the side hole the keyword describes.

The limits are the swivel range and the height: 180 degrees is the narrowest swing here, and at 18 in the body is the joint-tallest in the group. Buy this combo if brass construction and a low spout outlet matter and the space above the deck is open. Skip it if you need a full 360 degree swing.

  • Pros: brass construction stated; coordinating dispenser; forward-rotating handle
  • Cons: 180 degree swivel; joint-tallest body in the group

Kraus Britt KPF-1690SFS-KSD-31SFS

The Britt is the commercial-style entry: an open coil spring spout with a stainless steel hose and a docking arm, sold with a complementing soap dispenser and an optional deck plate. Kraus lists a flow rate of 1.8 gpm, a 360 degree swivel, and a dual-function sprayhead with a large rubber button.

The spray face uses easy-clean silicone nozzles, which the maker describes as clearing limescale and hard water build-up with a swipe of a finger. The deck plate allows installation on a one, two, or three hole sink, with the dispenser taking its own hole as usual. The stated faucet height range is 20 to 30 in, which reflects the tall spring design and makes this the most vertical faucet in the group by a wide margin.

The spring spout changes how the faucet is used, not just how it looks. The sprayhead travels on its stainless steel hose within the coil’s arc and docks to an arm rather than into a fixed spout, so rinsing a wide sink feels closer to a professional station than to a domestic pull-down. For a large farmhouse-style sink with a dispenser at the side, that working style is the Britt’s real argument.

That height is also the limit: a spring spout this tall needs open space above the deck and will dominate a small sink run. Buy the Britt if the commercial look is the point and your deck can spare the holes. Skip it for low cabinets, low windows, or a restrained traditional kitchen.

  • Pros: dispenser and deck plate included; full swivel; easy-clean silicone nozzles
  • Cons: tallest design here by far; spring style will not suit every kitchen

Buying guide

Buying a faucet and dispenser as a pair is mostly deck arithmetic plus refill logistics. The sections below cover the hole count, the finish match, how each dispenser refills, where the dispenser should sit relative to the handle, and the faucet-side specs that still deserve a look once the bundle question is settled.

Count holes for the faucet and the dispenser

The dispenser always takes its own hole. Add it to the faucet’s pattern before ordering: a one-hole faucet plus a dispenser needs two usable holes, and a three-hole deck covered by a deck plate may leave no hole free. The Sellette and Britt state one, two, or three hole faucet mounting.

If your deck falls one hole short, the choices are drilling, choosing a faucet whose plate covers fewer holes, or dropping the dispenser. Decide before the boxes arrive, because the dispenser hole position also decides whether the dispenser lands within easy reach of the basin.

Finish matching is the bundle’s whole point

A bundle earns its keep by guaranteeing that the dispenser and faucet share a finish from the same maker. The Kraus combos state the pairing directly, with both pieces in Spot Free Stainless Steel. The Delta bundle names its two components on one page, the same guarantee in another form.

Buying the pieces separately risks two near-matching stainless finishes that differ under kitchen light. If you do buy separately, match by the maker’s finish name, not by a photograph, and keep the faucet’s exact finish code from its maker page when ordering the dispenser.

Top-fill versus under-deck refill

Most deck dispensers refill by unscrewing the pump head and pouring, or by removing the bottle from under the sink. The Setra’s sheet states a top-fill dispenser, which is the cleanest arrangement: the bottle stays mounted and soap pours in from above the deck.

For the other models, the maker pages do not state a top-fill feature, so plan on the standard routine. Under a deep sink with crowded plumbing, that routine is awkward enough that refill style can honestly decide between two otherwise similar bundles.

Dispenser placement and handle swing

The keyword says side dispenser, and the side matters. Place the dispenser on the side you reach with your free hand, or beside the handle if the deck is drilled symmetrically. Clearance matters more: a single-handle lever sweeps an arc, and on the Bolden combo that arc rotates forward.

Check that the lever’s arc does not strike the dispenser pump head on your deck layout. Forward-rotating handles reduce the risk because the arc stays over the sink side of the deck, away from the rear strip where dispensers usually sit.

Faucet specs still count

A good bundle can still be the wrong faucet. The flow rates here run from 1.5 gpm on the Setra to 1.8 gpm on the Sellette, Essa bundle, and Britt, with the Bolden combo at 1.75 gpm as its page states. Swivel runs from 180 degrees to a full 360. Heights run from 15-1/4 in to the Britt’s spring-spout range of 20 to 30 in.

Run the same checks you would for any faucet: overhead clearance, basin size against spout height, and valve type. All five models here use ceramic disc or ceramic cartridge valves as their makers state, so the differentiators are geometry and refill style rather than valve class. Weight those two factors first, because they are the ones you will notice every single day at the sink.

FAQ

Bundle questions tend to be practical: whether the dispenser is really in the box, which hole it takes, how it refills, and whether the pair can be split later. The answers below rest on what the maker pages and the Kohler specification sheet state for these five models.

Do one handle kitchen faucets with a side soap dispenser include the dispenser?

For these five, yes, and each maker says so on the page or sheet opened. The Kraus combos carry the dispenser in the model code itself, the Kohler sheet lists the top-fill dispenser in the box contents, and the Delta bundle page names the faucet and the RP1001 dispenser as the two included components.

That stated inclusion is the reliable way to shop this keyword. A faucet page that merely shows a dispenser in a lifestyle photograph, without listing it in the box or the model name, is not making the same promise, and several faucets elsewhere in this batch are sold with no dispenser at all.

Which deck hole does the dispenser use?

Its own. None of the five dispensers here shares the faucet’s mounting hole; each needs a separate hole in the deck or sink rim. The Delta bundle page makes the arithmetic explicit by listing a single-hole installation for the dispenser alongside the faucet’s one or three hole pattern.

On a four-hole deck, the common layout is faucet at center with plate, dispenser at one end hole. On a two-hole deck, a single-hole faucet plus dispenser fits exactly. Count first, then choose the bundle whose faucet pattern leaves the right hole free.

Can the dispenser be refilled without going under the sink?

On the Setra, yes: Kohler states a top-fill dispenser, so soap pours in from above the deck. On the other four models, the maker pages do not state a top-fill feature, so refilling follows the standard route of removing the pump head or the bottle, which can mean working under the sink.

If under-sink access is tight in your kitchen, that one stated feature may outweigh flow rate or styling differences between bundles. It is the kind of detail that decides daily satisfaction long after the installation is forgotten.

Can I install the faucet now and the dispenser later?

Generally yes, since the dispenser mounts independently through its own hole, and an unused deck hole can be covered in the meantime. The caution is finish drift: a dispenser bought later from the same maker should carry the same finish name, and keeping the bundle’s model code from the original purchase makes matching simple.

The reverse also holds. If a bundled dispenser is never installed, nothing about the faucet’s operation changes; the five faucets here are complete faucets with or without their dispensers mounted.

Does the dispenser hold lotion as well as soap?

Kohler and Delta both describe their included pieces as soap and lotion dispensers on the pages opened, so either liquid is within the stated use. The Kraus combos are described as soap dispensers. In practice the pumps are similar, but the article sticks to each maker’s own wording.

Thick liquids pump more slowly through any of these dispensers, and the stated descriptions do not promise a particular viscosity range. If lotion is the main use, the models whose makers name lotion explicitly are the better-evidenced picks.

Conclusion

Choose the Kraus Sellette for the widest mounting range with a guaranteed finish match, the Kohler Setra for top-fill refills and the longest reach, and the Delta Essa bundle for a mainstream pair with a low-profile dispenser. The Bolden combo suits brass fans; the Britt suits spring-spout fans. Count your deck holes first.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.