Key takeaways
- Meat grinders for hunters whose makers state game use in print: deer, elk, caribou, hog and venison, compared by motor, throughput, plates and duty wording.
A good set of meat grinders for hunters starts with the maker’s own words, and this list only includes electric models whose pages name the job: deer, elk, caribou, hog or venison in the copy, a throughput in pounds per minute, and duty wording for long runs. Six grinders qualify, from a 0.75 HP unit to a 1.5 HP number 32 machine.
Quick verdict
The strongest hunting statement belongs to LEM: its number 32 grinder is called perfect for serious hunters processing six or more deer, elk, or game animals per season, at 17 pounds per minute. MEAT! names deer, elk, caribou and hog for its 0.75 HP model; Weston calls its Pro number 22 ideal for hunters.
The VEVOR pair earns its places differently: both listings print hunting meat processing in their use lists and name venison among the meats, at 13 and 11 pounds per minute. Every claim in this article is a maker’s printed claim, quoted or paraphrased from the product page, so the shortlist can be checked line by line against the pages themselves before a season starts.
| Model | Head size | Motor as printed | Throughput as printed | Game wording on the page |
|---|---|---|---|---|
| MEAT! .75 HP Grinder | #12 | 0.75 HP | 7 to 10 lb per minute | Deer, elk, caribou, hog named |
| Weston Pro Series #22 | #22 | 1.5 HP, 1120 watts | 14 lb per minute | Ideal for hunters; venison, bison named |
| VEVOR Commercial #22 | #22 | 750W, 1 HP | 13 lb per minute | Hunting meat processing; venison named |
| VEVOR Commercial #12 | #12 | 550W, 0.7 HP | 11 lb per minute | Hunting meat processing; venison named |
| LEM BigBite #12 | #12 | 0.75 HP | 11 lb per minute | Processing game; hunter named |
| LEM BigBite #32 | #32 | 1.5 HP | About 17 lb per minute | Serious hunters, 6 or more deer or elk |
How we selected these grinders
The rule is printed evidence. A model qualifies when its page states hunting or game use in words, prints a throughput figure, or states duty wording for long runs, and the strongest entries do all three. Generic power claims without a game reference were not enough, and two machines were left out because their pages never mention hunting.
Species coverage was checked the same way: a model whose page names venison but never mentions hunting still had to show duty or throughput evidence, and the reverse also held. The result is a list where every entry can be traced to a sentence on its own page, which is the standard a hunter needs when the purchase has to be right before the season opens rather than after it.
Head size matters to hunters because it sets the throat and plate diameter: number 12 machines suit one or two animals at a time, number 22 machines move whole seasons faster, and the number 32 is built for the heaviest home workloads in this set. Every throughput figure below is the maker’s own rating, printed on the page, and the comparison table uses those ratings exactly as published rather than any outside estimate.
Meat grinders for hunters, product by product
Six grinders follow, ordered by how directly the pages speak to hunters: the MEAT! and LEM models name the animals, Weston names the hunter, and the two VEVOR listings print hunting meat processing in their use lists. Each entry keeps to what its page states, including plate sizes, tubes and duty wording a buyer can verify before ordering.
MEAT! .75 HP Grinder (#12)
MEAT! opens its own page with the plainest game statement in this article: the grinder is built to easily handle all the deer, elk, caribou, hog, and whatever you care to feed it. That sentence, from the maker’s store page, is the printed fit this list requires, and it is backed by an industrial-strength 0.75 HP motor rating on the same page.
The stated throughput is 7 to 10 pounds of ground meat per minute, which puts a single deer through the coarse plate in a short session by the maker’s own arithmetic. The box contents, as printed, are coarse and fine stainless steel grinding plates and a stainless steel stuffing plate with three tubes for stuffing sausage, plus an accessory tray for easy organization during the work.
For a hunter who processes a deer or two and a hog in a season, this is the most direct match between claim and task in the set: the animals are named, the rate is printed, and the plates cover both a coarse chili grind and a fine sausage grind. The maker’s page does not print a weight or dimensions for the unit, so bench space planning rests on the number 12 head class rather than a stated footprint.
Weston Pro Series #22 Meat Grinder (10-2201-W)
Weston’s manufacturer copy calls this grinder ideal for hunters, farmers, small retail butchers, and anyone who takes pride in a self-sustaining approach to food, and the brand line adds that its products are designed for hunters with a passion for field-to-table foods. Venison and bison are named among the meats.
The meats named on the page are beef, pork, venison and bison. The motor is rated at 1.5 HP and 1120 watts, air-cooled and permanently lubricated, and the copy states it can continuously grind large volumes of meat without stopping, which is the duty wording that matters when several animals are waiting. Throughput is up to 14 pounds per minute through a rifled head and tapered throat, and a forward-reverse mode is described as useful for tougher meats and connective tissue.
The kit is the most complete in this set: stainless plates for coarse 7 mm and fine 4.5 mm grinds, a grinder knife, a sausage stuffer kit with four funnel sizes, an auger-grabbing stomper, a storage tray with cover, and a built-in knife sharpener for prep work. The page lists 58 pounds and a limited five year manufacturer warranty, so it is a committed bench machine rather than a cupboard one.
VEVOR Commercial Meat Grinder, #22, 750W/1HP
The VEVOR number 22 listing prints its hunting fit in the use list: ideal for home kitchens, hamburger restaurants, butcher shops, steakhouse, pet food preparation, hunting meat processing and more commercial use. Venison appears in the meat list on the same page, so both the animal and the activity are stated, which qualifies the model.
Its motor is rated 750 watts and 1 HP, with a stated output of up to 13 pounds of meat per minute through a 3-stage auger that presses and grinds in sequence. The cooling copy is duty wording a hunter can use: a rapid cold-air cooling system that supports long-term continuous working, plus a reset button that protects the motor from overload when a batch runs long.
The plate set is a 10 mm coarse plate, a 4.5 mm fine plate and a stuffing plate, with three stuffing tubes at 12, 22 and 30 mm, two cross blades, a cleaning brush, meat claws and a pusher. After a session, the listing names the blades, plates, tubes, head, auger and meat pan as parts that can go in the dishwasher, with the main body wiped and dried, which shortens the least pleasant part of processing day.
VEVOR Commercial Meat Grinder, #12, 550W/0.7HP
The smaller VEVOR carries the same printed hunting line as its number 22 sibling: the use list includes hunting meat processing, and venison is among the meats the listing names. For a hunter whose season is one or two deer, that stated fit at a number 12 head size is the draw, since the machine is lighter to move and store between seasons.
The motor is rated 550 watts and 0.7 HP, and the stated output is up to 11 pounds of meat per minute, only two pounds per minute behind the bigger model on paper. The same 3-stage auger design, reset button and cold-air cooling wording appear on this page, so the continuous-working claim carries down the range rather than stopping at the commercial end of it.
Plates are 10 mm coarse, 4.5 mm fine and a stuffing plate, with three stuffing tubes at 12, 22 and 30 mm and two cross blades in the box. The cleaning wording matches the larger model as well, with the working parts listed for the dishwasher and the body wiped dry. Hunters choosing between the two VEVORs are really choosing head size and batch pace, since the stated hunting evidence is identical.
LEM Products BigBite #12 Meat Grinder
LEM’s copy for the BigBite number 12 speaks to this keyword: the grinder is described as ideal for processing game if you are a hunter, chef, or buying bulk meat, and the description’s meat list includes venison and deer by name. That makes three of the four fit signals on one page, game, hunter and animal, before the specifications are even read.
The motor is rated 0.75 HP and the stated grind rate is up to 11 pounds of meat per minute, matching the VEVOR number 12’s printed pace in a stainless build that weighs 33.1 pounds as listed. A permanently lubricated motor, a noise-dampening design and a storage drawer under the head for plates and tubes round out the practical details the page offers a home processor.
The box, as listed, holds three plates, a knife, a stomper and stuffing tubes, so both grind textures and sausage work are covered without extra purchases. For a hunter who wants the game claim from a specialist processing brand rather than a general commercial line, this is the number 12 to look at first, with the number 32 below it as the step up.
LEM Products BigBite #32 Meat Grinder (17821)
The BigBite number 32 carries the boldest sentence here: LEM calls it perfect for serious hunters processing six or more deer, elk, or game and animals per season, and adds that it boasts remarkable endurance for long processing sessions. No other page in the set ties a number of animals to a season, the benchmark claim for the set.
The hardware behind the claim is a 1.5 HP high-torque 110-volt motor with a built-in circuit breaker, an output of approximately 17 pounds of meat per minute, and a 3 inch throat that takes large chunks. The BigBite auger design pulls meat through the rifled head, and the listed weight is 64.8 pounds, so this is a fixed-station machine for a garage or processing bench. The rifled head and BigBite auger are the maker’s stated mechanism for that pace.
Three stainless plates come in the box, 4.5 mm, 10 mm and a stuffing plate, with three stuffing tubes at 1/2 inch, 1 inch and 1 1/8 inch outside diameter. A storage drawer, a noise-dampening design and a five-year factory warranty, as the maker words it, complete the listing. Hunters below the six-animal mark will not use its headroom, but the page’s own threshold makes the intended buyer unmistakable.
Buying guide
Buying a grinder for hunting season is mostly a matching exercise: match the head size and stated throughput to the number of animals you realistically process, then check that the page’s own game wording covers the species you actually bring home. The headings below work through that matching in the order it usually decides the purchase.
Match the head size to your season
Head size is the simplest sizing language here: number 12 grinders like the MEAT!, the smaller VEVOR and the LEM number 12 suit a deer or two at a time, while number 22 machines add pace for mixed seasons, and the number 32 is aimed by its maker’s words at six or more deer or elk a season. One class up from your current season is the usual hedge.
Weight follows size closely in this set, from 33.1 pounds for the LEM number 12 to 64.8 pounds for the number 32, and that decides whether the grinder travels to a camp or lives on one bench. A machine that stays set up gets used for small batches too, while a heavy unit that must be dragged out tends to wait for the biggest processing days of the year.
Read meat grinders for hunters by their duty wording
Duty wording is the maker’s promise about long runs, in different forms here: Weston states its motor can continuously grind large volumes without stopping, VEVOR prints that its cooling supports long-term continuous working, and LEM claims remarkable endurance for long sessions. Each phrase is a printed claim to weigh, not a measured result.
Cooling design is the hardware behind those phrases, so look for air-cooled motors, cold-air cooling systems and overload protection like the VEVOR reset button or the LEM circuit breaker. A grinder that protects itself mid-batch saves a hunt’s worth of meat from sitting warm while a motor cools, which is the practical failure mode duty wording is really about.
Plates and tubes decide the finished products
Most grinders here ship with a coarse plate near 10 or 7 mm and a fine plate at 4.5 mm, covering burger and chili grinds plus sausage meat, and a stuffing plate with tubes adds the sausage step. Hunters making snack sticks should check the smallest tube listed, since the Weston four funnel sizes and the VEVOR 12 mm tube serve different casings.
Dual-texture plans matter too: a coarse grind followed by a fine regrind is standard for sausage, so plate changes mid-session are routine, and features like the Weston’s auger-grabbing stomper exist to make head removal faster. Storage drawers, listed on both LEM models, keep plates and tubes with the machine instead of in a kitchen drawer across the house.
Throughput is a rating, not a promise
Every rate here is a maker’s printed maximum: 7 to 10 pounds per minute for the MEAT!, 11 for the number 12 VEVOR and LEM, 13 and 14 for the number 22 pair, and 17 for the LEM number 32. Pace depends on meat temperature, chunk size and feeding pace, so the figures rank the machines against each other better than they predict finishing time.
The useful way to read the numbers is against your own batch: a hunter with three deer to break down cares about the gap between 10 and 17 pounds per minute across a long afternoon, while a single-deer household will finish quickly on any machine here. Chilled, well-trimmed meat feeds faster on every model, which is preparation, not machinery, and no rating on these pages assumes otherwise.
Frequently asked questions
The questions below are the ones hunters ask before a season purchase, and each answer stays inside what the product pages state: the animals named in maker copy, the printed throughput figures, the plate sizes in the box, and the duty wording each brand chose to publish for its machine.
Which of these grinders names the most game animals?
MEAT! names the widest list: deer, elk, caribou and hog for its 0.75 HP grinder. LEM’s number 32 names deer and elk with a count of six or more animals a season, Weston names venison and bison among its meats, and the LEM number 12 lists venison and deer. The VEVOR listings name venison and print hunting meat processing as a use, not species.
That difference in style is worth noticing when comparing brands: some makers write for the hunter directly, others write a commercial use list that includes hunting. Either way, the evidence standard here is the same, the words are on the product page where a buyer can read them before ordering, and none of the six articles’ claims rests on a review site or a roundup’s summary of the machine.
How much throughput do meat grinders for hunters need?
The pages give a practical ladder, not a single answer: 7 to 10 pounds per minute at the compact end, 11 to 14 in the middle, and 17 at the top. One deer is served by any rung, while the strongest duty wording sits with the faster machines, suggesting the rate should match the number of animals rather than the largest head by default.
LEM’s own threshold is the clearest guide printed anywhere in this set: its number 32 is positioned for hunters processing six or more deer or elk per season. Below that mark, the number 12 and number 22 models carry their own hunting statements, so the honest reading is that throughput buys time on big days, not permission to process game at all.
Can these grinders make sausage as well as burger?
Yes, on the printed evidence: every model in this article lists a stuffing plate or sausage kit among its contents. The Weston includes a stuffer kit with four funnel sizes, the VEVOR pair includes three tubes each at 12, 22 and 30 mm, the MEAT! includes three tubes on a stainless stuffing plate, and both LEM models list stuffing tubes in the box.
Plate choice supports the sausage plan as well, since the fine 4.5 mm plates listed across the set are the standard second grind for sausage meat, and the coarse plates handle the first pass. What varies is tube range, so hunters set on small snack sticks should compare the smallest tube in each kit against their casing size before choosing.
What does continuous duty wording actually cover?
It covers the motor and cooling design as the maker describes them: air-cooled, permanently lubricated motors on the Weston, a cold-air cooling system on the VEVORs, and endurance wording from LEM. No page prints a minute limit for a session, so the claims are qualitative: stated design intent for long runs, not a timed guarantee.
The supporting hardware is the concrete part: overload reset buttons, a built-in circuit breaker on the LEM number 32, and steel gearing on the Weston are physical features a buyer can confirm in the box. Reading duty claims together with those features gives a fairer picture than either alone, and it is the reading this article’s shortlist was built on from the start.
Conclusion
For most hunters, the number 22 class is the season-proof middle: Weston and VEVOR both print the hunting claim and the pace to back it. LEM’s number 32 owns the heavy end with its six-animal threshold, MEAT! names the most species, and the two number 12s keep smaller seasons simple. Pick by the animals on the page and the count in your season.