Key takeaways
- Meat grinders for bones with the rating stated in print: chicken bones, soft bones and small fish bones, compared by head size, motor, plates and output rates.
Most grinder makers stay silent about bones, and a few warn against them outright. This shortlist covers meat grinders for bones whose makers state the capability in print: chicken bones on the two LEM BigBite models and both VEVOR machines, and soft bones, named as chicken, rabbit, squirrel and quail, on the STX and the Newhai.
Quick verdict
The LEM BigBite #32 is the strongest stated rating in this set: a 1.5 HP machine whose maker writes that it can also process chicken bones, at about 17 pounds of meat per minute. The STX Turboforce II Platinum carries the widest stated list, soft bones such as chicken, rabbit, squirrel and quail, on a lighter #12 machine.
Every rating here stops at chicken bones or small soft bones. No maker in this set claims beef bones, pork bones or any other large bone, and that boundary is the single most important line in the article: a grinder bought for chicken bones is being used exactly as its maker describes only while the bones stay small and soft.
The two VEVOR models split by format. The #12 on the stainless housing is a steady 11 pounds per minute with a three-stage auger, while the 550 pound per hour machine is a simpler single-button unit whose maker adds fish bones to the stated list. The Newhai #22 states chicken soft bone in its product title and brings the largest plate set of the group.
| Product | Stated bone rating | Head size | Motor | Stated output | Plates included |
|---|---|---|---|---|---|
| LEM BigBite #32 | Chicken bones | #32 | 1.5 HP | About 17 lb per minute | 4.5mm, 10mm, stuffing |
| LEM BigBite #12 | Raw chicken bones | #12 | 0.75 HP | Up to 11 lb per minute | Three plates |
| VEVOR Commercial #12 | Chicken cartilage, chicken bones | #12 | 550W, 0.7HP | Up to 11 lb per minute | 10mm, 4.5mm, stuffing |
| STX Turboforce II Platinum | Soft bones: chicken, rabbit, squirrel, quail | #12 | 2000W peak, 600W running | 175 to 225 lb per hour | Five sizes plus stuffing plate |
| Newhai 1.5HP #22 | Chicken soft bone | #22 | 1.5 HP, 1100W | Not stated per hour | 3mm, 6mm, 8mm |
| VEVOR 550LB/h | Small chicken bones, fish bones | Not stated | 1100W | Up to 550 lb per hour | 6mm, 8mm |
How we selected these grinders
One rule decided this list: the maker’s own product page had to state bone grinding in words. A model qualified only when its page says it grinds or processes bones, and the article repeats that wording as printed, chicken bones where the maker writes chicken bones and soft bones where the maker writes soft bones.
The rule cut in both directions. One widely sold #8 grinder from a maker with two models on this list was left out because its feature list states, in the maker’s words, not for bones. Strong motors and heavy housings were not enough on their own: several powerful commercial machines were passed over because their pages never mention bones at all.
Each pick also had to be a distinct model on sale as a new machine, and the facts below come from the maker’s description and specification blocks: head size, motor rating, stated output, plate sizes and the exact bone wording. Where a maker prints its output per minute and another prints it per hour, the table keeps each maker’s own unit rather than converting.
Meat grinders for bones, product by product
The six machines fall into two families. The LEM and VEVOR #32-class and #12-class units are heavy stainless grinders built around a stated chicken-bone rating, while the STX and Newhai take the soft-bone wording further, the STX by naming four animals and the Newhai by printing chicken soft bone in its title.
LEM BigBite #32
The BigBite #32 is LEM’s largest grinder in this set, a 1.5 HP stainless machine with a 3 inch throat that processes approximately 17 pounds of meat per minute. Its maker’s description ends the meat list with the line this article is built on: the #32 BigBite grinder can also process chicken bones.
LEM builds the rating into a heavy frame. The grinder weighs 64.8 pounds, uses a high-torque 110 volt motor with a built-in circuit breaker, and feeds meat with the BigBite auger and a rifled head that the maker says pulls hefty bites of meat through the large-diameter throat. A storage drawer under the head holds the plates and accessories.
The box carries three stainless steel plates, 4.5mm, 10mm and a stuffing plate, a stainless knife, and three stuffing tubes at 1/2 inch, 1 inch and 1 1/8 inch. LEM aims the machine at volume: its copy describes it as the pick for serious hunters processing six or more deer, elk or other game per season, and the maker lists a five-year factory warranty with lifetime customer support.
The stated meat list around the bone line is wide: beef, pork, lamb, mutton, venison and deer, plus a raw diet for pets made without fillers, which is the use that brings most buyers to a chicken-bone rating in the first place. The full kit also includes the large meat pan and a bushing removal tool, and LEM describes the machine as easy to use and easy to clean, with a quieter running design than other electric grinders in its copy.
LEM BigBite #12
The BigBite #12 states the clearest raw wording in the set: its maker writes that the 12 BigBite grinder can also process raw chicken bones, and its feature list repeats that the machine handles beef, pork, poultry, lamb, venison and raw chicken bones. The motor is 0.75 HP and the stated rate is up to 11 pounds per minute.
At 33.1 pounds the #12 is roughly half the weight of its #32 sibling, with the same family design: a permanently lubricated motor, stainless steel parts, a noise-dampening build and a storage drawer beneath the grinder head. For a household grinding whole chickens for pet food or stock, it is the smaller machine that still carries the printed rating.
Three plates, a knife, a stomper and stuffing tubes come in the box. The maker’s copy positions the #12 for medium to large batches and for repeated use, and its dimensions, about 20 by 9 by 16 inches, suit a counter or a sturdy shelf rather than a permanent bench mount.
VEVOR Commercial #12
VEVOR’s stainless #12 pairs a 550W, 0.7HP motor with a three-stage auger and a stated rate of up to 11 pounds of meat per minute. Its maker writes that the auger and cross-sharp steel blade easily grind chicken cartilage, chicken bones, frozen and fresh meat, and a second line repeats chicken bones and chicken wings in the full ingredient list.
The accessory set is the most complete in this article: two cross blades, a 10mm coarse plate and a 4.5mm fine plate, a stuffing plate, three sausage tubes at 12, 22 and 30 millimeters, a cleaning brush, two meat claws, a pusher and a stuffing tube connector. A reset button covers overload, and a cold-air cooling system is listed for long continuous runs.
Cleaning is spelled out part by part: the blades, grinding plates, sausage tubes, grinding head, auger and meat pan can go in the dishwasher, while the main body is wiped with a dry cloth and never immersed. The listing also carries an ETL approval line in its feature set, next to the anti-vibration foot pads and the locking knob for the head.
The maker’s setting list runs from home kitchens to hamburger restaurants, butcher shops and steakhouses, with pet food preparation and hunting meat processing named at the end. That spread matches the rating: a machine asked to grind chicken bones at a counter all week needs the cooling system, the reset button and the locking head that the feature list describes.
STX Turboforce II Platinum
The STX carries the widest stated bone list of the six: its maker writes that the grinder is capable of grinding soft bones such as chicken, rabbit, squirrel and quail, and adds that it can be used in the B.A.R.F., bones and raw food, diet for pets. The head is a size #12 in polished cast aluminum, not coated.
Power is printed two ways: 2000 watts of peak output power and 600 watts of running power, with a stated grind rate of 175 to 225 pounds of meat per hour on high speed. A three-speed system gives high, low and reverse, and four air intakes form the maker’s quad air cooling design. Set up, the unit measures 19 by 8 by 14 inches and weighs 13 pounds.
The package is accessory-heavy: five sizes of tempered steel grinding plates plus a stuffing plate, three stainless steel cutting blades, three sausage tubes at 3/4, 5/8 and 1/2 inch with an adapter, a kubbe attachment, a burger and slider press, meat claws and a meat tray that holds more than 3 pounds. The aluminum head parts are hand-wash only in the maker’s instructions.
Two design details stand out in the maker’s description. The meat pusher is shaped to be pressed with the palm rather than gripped, and its top opens so the sausage tube set stores inside it. The grinder itself comes in black or white with chrome accents, a styling choice the maker says is meant to sit comfortably on a kitchen counter between sessions.
Newhai 1.5HP #22
Newhai prints its rating in the product title itself: a 1.5HP commercial meat grinder, #22, for beef, pork and chicken soft bone. That title wording is the maker’s own statement of the job, and it pairs the bone claim with a #22 head, the second-largest format in this set after the LEM #32.
The listing’s specification fields give 1100 watts, 110 volts and an item weight of 50 pounds, with a capacity field that reads 600 pounds. The plate set is 3, 6 and 8 millimeters, a finer spread than most of this group, which suits a maker aiming the machine at commercial counters as much as home processing.
Because the rating sits in the title rather than a paragraph, the honest summary is narrow: Newhai states chicken soft bone for this machine and prints a heavy specification under it. Buyers who want the bone wording spelled out in a full description have the LEM and STX entries above; buyers who want a #22 head at this power have this one.
VEVOR 550LB/h
VEVOR’s second entry is the simpler machine: a single-button 1100W grinder whose maker writes that it can be applied to versatile ingredients, including small chicken bones and fish bones. Fish bones appear in no other rating in this set, which makes this the stated pick for whole-fish grinding.
The stated output is approximately up to 250 kilograms, 550 pounds, of meat per hour, from a motor turning at 193 revolutions per minute. Two grinding plates come in the box, 6mm and 8mm, with two blades and a plastic pusher. The feeder tube is 54 millimeters, about 2.1 inches, wide, which the maker notes means meat needs less fine chopping before grinding.
The unit measures 17.6 by 8.3 by 15.2 inches and weighs 41.6 pounds. One construction note is printed on the page and worth knowing before purchase: the throat of this grinder is undetachable, so cleaning reaches the head in place rather than at the sink.
The maker’s application list reaches past meat: fish, chili and vegetables are named alongside the bone line, and the stated settings run from home kitchens to hotel restaurants and company use. Four anti-slip feet and a ventilation design for heat dissipation round out the printed feature set, and the two detachable parts, the grinding plate and the plate tray, are the pieces the maker says come off for cleaning.
Buying guide
Buying a grinder for bone work starts with one printed line and then becomes a sizing exercise. Read the rating exactly as the maker wrote it, match the head and motor to the batch you actually grind, and check the plate set and the cleaning routine before the machine arrives.
Read the meat grinders for bones rating word for word
The makers in this set write three ratings: chicken bones, raw chicken bones, and soft bones with a named list. Those phrases are not interchangeable. A chicken-bone rating covers chicken bones; the STX soft-bone list adds rabbit, squirrel and quail; and no phrase in this article extends to beef or pork bones, however heavy the machine looks.
Silence matters as much as wording. Most grinder pages never mention bones, and at least one maker in this article’s research states not for bones on a smaller model while printing a chicken-bone rating on its larger ones. The model-by-model wording is the specification; the brand name alone guarantees nothing about the next size down.
Match head size and motor to the batch
Head size sets the bite the machine can take. The #32 LEM pairs its rating with a 3 inch throat and about 17 pounds per minute; the #12 machines from LEM and VEVOR state 11 pounds per minute; and the STX prints its output per hour instead. Whole chickens for a week of pet food fit the #12 class; a season of birds plus game points at the #32.
Weight follows size. The STX sets up at 13 pounds and stores in a cupboard, the #12 machines sit between 33 and the mid-40s, the Newhai lists 50 pounds and the LEM #32 lists 64.8 pounds. A grinder that lives on the bench gets used for every small batch; one that must be lifted out gets used only when the batch justifies it.
Count plates before counting watts
Bone-in grinds end at the plate, and the sets differ more than the motors do. The STX includes five plate sizes plus a stuffing plate, the Newhai prints 3, 6 and 8 millimeters, the LEM #32 and VEVOR #12 pair a 4.5mm fine plate with a 10mm coarse plate, and the VEVOR 550LB/h ships two plates, 6 and 8 millimeters.
More plates mean the texture can be set in one pass instead of regrinding through the same holes, and regrinding bone-in meat is the slow, warming work these ratings are meant to shorten. Check also what the plates are made of where the maker states it: stainless on the LEM machines, tempered steel on the STX.
Plan the cleaning around the head design
Bone grinding leaves the head coated, and the makers’ cleaning instructions differ by model. VEVOR’s #12 sends its blades, plates, tubes, head, auger and pan to the dishwasher and keeps the body at the counter. The STX head is polished cast aluminum that the maker says to wash by hand with mild detergent and towel dry.
The VEVOR 550LB/h prints the strongest constraint: its throat is undetachable. That single line changes the routine from sink washing to in-place wiping and brushing, and it is printed on the product page rather than discovered after the first batch. Storage drawers, like the one under the LEM heads, keep the small plates and tubes with the machine between sessions.
FAQ
The questions below stick to what the six makers state in print. Where a page does not answer a question, the answer says so, because the gap between a stated rating and an assumed one is exactly where grinder heads get damaged. Each answer names the maker and the model it comes from, so the wording can be weighed on its own terms.
Do meat grinders for bones handle beef bones?
Not on any page in this set. The widest rating printed here is the STX list of soft bones, chicken, rabbit, squirrel and quail, and the other five makers stop at chicken bones or small chicken bones and fish bones. Beef bones and pork bones appear in no maker’s wording for these six machines, so they sit outside every rating in this article.
That boundary holds even for the largest machine here. The LEM #32 is a 1.5 HP grinder that processes about 17 pounds of meat per minute, and its maker’s bone line still reads chicken bones. Power raises the volume of rated work a grinder can do; it does not widen the rating the maker printed.
What does soft bones mean in these listings?
It means exactly the list the maker prints next to it. STX defines its rating by naming chicken, rabbit, squirrel and quail. Newhai’s title prints chicken soft bone. In both cases the phrase is a defined list, not a general category: a bone type that is not named in the maker’s wording is not covered by the maker’s wording.
The same reading applies to the chicken-bone machines. LEM writes chicken bones for the #32 and raw chicken bones for the #12, and VEVOR writes chicken bones and, on the 550LB/h model, small chicken bones and fish bones. Raw in the #12 wording is part of the rating: the maker describes the bones going in raw, as they come off the bird.
Can these grinders grind frozen meat along with the bones?
Two of the six say so in print. VEVOR’s #12 lists frozen and fresh meat in the same line as its chicken cartilage and chicken bones, and its ingredient list repeats frozen meat. The other makers’ bone lines do not mention frozen meat, so for the LEM pair, the STX and the Newhai, frozen grinding sits outside the printed bone wording.
Frozen meat on its own is a separate claim from frozen bone-in meat, and the pages keep them separate too. The careful reading is the one used throughout this article: the rating covers what the sentence covers, in the state the sentence names, and nothing beyond it.
Do the makers assign a plate to bone grinding?
No maker in this set assigns a specific plate to its bone rating on the product page. The plates are listed as general sets: five sizes plus a stuffing plate on the STX, 3, 6 and 8 millimeters on the Newhai, 4.5 and 10 millimeters plus a stuffing plate on the LEM #32 and the VEVOR #12, and 6 and 8 millimeters on the VEVOR 550LB/h.
What the pages do give is the full plate inventory, which is the useful comparison: a set with a coarse and a fine plate lets the grind be staged, coarse first and fine second, while a five-plate set adds steps between. The choice among the included plates is left to the operator by every maker here.
Conclusion
For stated bone ratings, the LEM BigBite #32 leads on power and the STX Turboforce II Platinum leads on the width of its soft-bone list, while the VEVOR 550LB/h is the only entry whose maker adds fish bones. Buy the wording first and the machine second: the printed rating, not the horsepower, is what covers the bones.