Updated Nov 15, 2026· 16 min read

Key takeaways

  • Five meat grinders for dog food whose makers state pet food use, compared on stated bone capability, throughput, head size, plates and listed cleaning notes.

Grinding dog food at home starts with a machine whose maker rates it for that work in print. This guide covers the best meat grinders for dog food across five models with maker-stated pet food wording, printed bone limits, stated throughput and listed plate sets, so every pick rests on published specs, not guesswork.

Quick verdict

Two of the five models carry maker wording for grinding raw chicken bones: the LEM Products BigBite #12 and the VEVOR Commercial Meat Grinder #22. The other three are boneless models whose makers state pet food preparation in plain terms, and each one is labeled boneless wherever it appears in this guide.

The BigBite #12 is the most complete package for this keyword: its maker states pet food preparation, a raw diet use, and raw chicken bone grinding, at up to 11 lbs per minute. The VEVOR #22 posts the highest stated throughput at up to 13 lbs per minute and lists its plates by size. The BigBite #8 and BigBite #5 suit boneless batches at about 7 and about 4 lbs per minute, and the LEM #8 Countertop is the smallest machine here, with a 575 watt motor and a stated rate of up to 3 lbs per minute.

Product Head size Motor Stated throughput Bone capability as stated Plates listed
LEM Products BigBite #12 Meat Grinder #12 0.75 HP Up to 11 lbs per minute Raw chicken bones stated Coarse, fine and stuffing plates; sizes not stated
VEVOR Commercial Meat Grinder, #22 #22 750W (1 HP) Up to 13 lbs per minute Chicken bones and chicken cartilage stated 10 mm coarse, 4.5 mm fine, stuffing plate
LEM Products BigBite #8 Meat Grinder #8 0.5 HP About 7 lbs per minute Not for bones, per the maker Three plates listed; sizes not stated
LEM Products BigBite #5 Meat Grinder #5 0.35 HP About 4 lbs per minute Cannot process chicken bones, per the maker Coarse, fine and stuffing plates; sizes not stated
LEM #8 Countertop Meat Grinder, 575 Watt #8 575 watts Up to 3 lbs per minute No bone capability stated 8 mm and 4.8 mm plates, stuffing plate

How we selected

A model earns a place in this guide only when its maker states the fit in its own wording: pet food preparation, making pet food from scraps, or a raw diet use for a pet. Throughput figures, plate lists and bone wording are taken from the same published product information, quoted as printed and never widened.

Bone capability follows the maker wording exactly. Where a maker names raw chicken bones, the model is described with that wording and nothing broader; where a maker writes that a grinder is not for bones, or states that it cannot process chicken bones, the model is presented as boneless only. One model here carries no bone statement at all and is shown that way. No model is credited with a plate size, a capacity figure or a cleaning method that its maker does not print, and no health or nutrition claim is made for any feeding style.

Meat grinders for dog food: the five models

The five models below divide by one question first: does the maker state bone grinding, or does the maker limit the machine to boneless meat? Two models state raw chicken bone grinding in their wording. Three are boneless machines with stated pet food wording, sized for smaller and slower batches.

LEM Products BigBite #12 Meat Grinder

The BigBite #12 is the fullest match for this keyword. Its maker states that it handles beef, pork, poultry, lamb, venison, and raw chicken bones, and the same wording covers making pet food from scraps and creating a raw diet for a pet, so the fit rests on printed claims rather than inference.

The motor is rated at 0.75 HP, and the maker gives a processing rate of up to 11 lbs of meat per minute. A separate line in the same wording repeats the bone point in direct terms: the 12 BigBite Grinder can also process raw chicken bones. The maker, not this guide, draws the line at chicken bones; no other bone type is named. The listed capacity figure is 7 lb, and the specs block gives an item weight of 33.1 pounds, a stay-on-the-counter machine for most kitchens.

The included set runs to a stainless steel knife, head, auger and large meat pan, with coarse and fine plates, a stuffing plate, 3 stuffing tubes and a plastic meat stomper. The maker does not print plate sizes in millimeters for this model, so the steps are described only as coarse and fine. A storage drawer is built in, the design is described as noise-dampening, and the motor is permanently lubricated. Pros: the strongest combined wording in this guide, covering pet food, a raw diet use and raw chicken bones; a high stated throughput; a complete accessory set. Cons: plate sizes are not stated, so one exact grind size cannot be confirmed from the maker wording; at 33.1 pounds it is a heavy lift on and off a shelf. Buy it if your batches include raw chicken bones. Skip it if every batch is boneless and a smaller grinder would do the same work.

VEVOR Commercial Meat Grinder, #22, 750W

The VEVOR #22 is the high-throughput entry in this group. Its maker names pet food preparation directly among the listed uses for the machine, alongside home kitchens and butcher shops, and states a grinding rate of up to 13 lbs per minute from a 750W motor rated at 1 HP, the highest figure in this guide.

Bone wording is explicit: the maker states that the 3-stage auger and cross-sharp steel blade easily grind chicken cartilage, chicken bones, frozen and fresh meat, and the listed meat range repeats chicken cartilage, chicken bones and chicken wings next to beef, pork, fish and venison. As with the BigBite #12, the claim stops where the maker stops; beef bones, pork bones and other hard bones are not named, and this guide does not extend the rating to them.

This is also the one model whose maker prints plate sizes: a 10 mm coarse plate, a 4.5 mm fine plate and a stuffing plate, with 2 cross blades and 3 sausage stuffing tubes in 12 mm, 22 mm and 30 mm sizes. The housing is stainless steel, and the maker lists the blades, plates, tubes, grinding head, auger and meat pan for dishwasher cleaning, with the main body wiped with a dry cloth and never immersed. The listing also names ETL approval, a rapid cold-air cooling system, a reset button for overload protection, anti-vibration foot pads and a fixed knob that locks the head. Pros: the fastest stated rate here; named plate sizes; dishwasher cleaning listed for the grinding parts. Cons: no weight or pan capacity is stated, so those figures cannot be compared from published specs; a #22 head is a large footprint. Buy it if batch volume is the priority. Skip it if counter space is tight or your batches suit a #8 head.

LEM Products BigBite #8 Meat Grinder

The BigBite #8 is the mid-size boneless option. Its maker builds the pet food use straight into the throughput sentence, rating the 0.5 HP motor at about 7 lbs of meat per minute for burgers, sausage, pet food, and bulk meal prep, and adds that the machine suits making pet food out of scraps that would otherwise be wasted.

The same sentence carries the limit in plain words: not for bones. This is a boneless dog food grinder, full stop; chicken frames, wings and other bone-in cuts sit outside the maker rating, and readers who grind bones need one of the two bone-stated models above. Within boneless work, the stated rate covers grinding boneless chicken, turkey or beef trim into dog food batches. The listed capacity figure is 7 lb, matching the #12, and the specs block gives an item weight of 32.6 pounds.

The build is stainless steel, with a permanently lubricated motor and a noise-dampening design. The included set lists three plates, a knife, a stomper and stuffing tubes; the maker does not print plate sizes for this model, so no grind steps are named here. Pros: a clear pet food statement from the maker; a mid-range stated rate; a listed capacity matching the larger #12. Cons: boneless only, with the limit stated by the maker; plate sizes not printed; at 32.6 pounds it is nearly as heavy as the #12 without the bone rating. Buy it if your dog food is always boneless and you want the pet food use stated outright. Skip it if any batch includes bones, or if exact plate sizes matter to your recipes.

LEM Products BigBite #5 Meat Grinder

The BigBite #5 is the smallest of the stainless BigBite line and the gentlest pace in this guide. Its maker rates the 0.35 HP motor at about 4 lbs of meat per minute for burgers, sausage, pet food, and meal prep, and the wording adds both the pet food from scraps line and the raw diet line found on the larger models.

The bone limit is stated twice in the maker wording: the throughput sentence ends with not for bones, and a separate note reads that the 5 BigBite Grinder cannot process chicken bones. Take both lines at face value: this is a boneless-only machine for batches mixed without bone content. The listed capacity is 4 lb, the smallest figure in this guide, and the specs block gives an item weight of 29.6 pounds, still a substantial machine despite the compact head size.

The included set mirrors the #12 in structure: a stainless steel knife, head, auger and large meat pan, coarse and fine plates, a stuffing plate, 3 stuffing tubes and a plastic meat stomper, plus a storage drawer. The maker describes a noise-dampening design and a permanently lubricated motor. Plate sizes are not printed for this model either, so the steps are named only as coarse and fine. Pros: the full pet food and raw diet wording in the most compact BigBite; a complete listed accessory set with storage drawer. Cons: the slowest stated rate among the three BigBite models; boneless only; a 4 lb capacity means more pan refills on big batch days. Buy it if you prepare modest boneless batches and want the maker pet wording without moving up to the #8 or #12. Skip it if you grind for several large dogs at once.

LEM #8 Countertop Meat Grinder, 575 Watt

The LEM #8 Countertop is the compact home machine in this guide. Its maker includes the raw diet wording in its description of the model, saying the grinder can be used to create a raw diet for a pet without unnecessary fillers, and lists beef, pork, lamb, mutton, venison and deer among the meats it processes.

The motor is rated at 575 watts, and the listing gives a grinding rate of up to 3 lbs per minute, the lowest figure here and a fair match for occasional small batches. Controls are push-button, with forward and pulse reverse functions for clearing a stubborn piece of meat. Neither product page for this model states any bone capability, so it is presented as a boneless grinder; readers who need bone grinding in print should choose between the BigBite #12 and the VEVOR #22. At 13 lb in the spec block, it is by far the lightest machine here and the easiest to store in a cabinet.

The head and body use heavy-duty aluminum, and the included set runs to a stainless steel knife, two stainless steel plates in 8 mm and 4.8 mm sizes, a meat stomper, a plastic stuffing tube with a 7/8 inch outside diameter, and a plastic stuffing plate. A cord-keeper compartment sits on the bottom of the unit. Pros: the only compact, light model here; named plate sizes; pulse reverse; raw diet wording from the maker. Cons: the slowest stated throughput in the group; no bone capability stated; aluminum construction where the BigBite models use stainless steel. Buy it if you grind small boneless batches now and then and storage space is limited. Skip it if dog food prep is a weekly high-volume routine.

Buying guide

Choosing among these five models comes down to four printed facts: the bone wording, the stated throughput, the head size and the plate list. Start with the bone wording, because it splits the group into two bone-stated models and three boneless ones, and no other spec can make up for the wrong side of that line.

Bone capability, exactly as the maker states it

Bone wording is the sharpest dividing line in this guide. Two makers state chicken bone grinding in so many words; two state the opposite just as plainly; one states nothing about bones at all. Read the exact sentence for the model you are considering, and let that sentence, not the motor size, decide.

A powerful motor does not create a bone rating. The BigBite #5 pairs a stainless build and a full accessory set with an explicit note that it cannot process chicken bones, while the BigBite #12 carries the chicken bone wording in print. Maker limits in this category are written as direct instructions, and grinding beyond them risks the knife, the plates and the gear train. Match the machine to the bone content you prepare: raw chicken bones call for one of the two bone-stated models, and boneless batches can go to any of the five.

Matching meat grinders for dog food to batch size

Batch size is where the stated throughput figures earn their place. A reader grinding a few pounds of boneless meat for one small dog works in a different range from a reader preparing a month of food for several large dogs, and the five models here spread across that range on purpose.

Work backward from a typical session. Total the pounds of meat in a normal batch, then compare that figure with the stated rate and the listed pan capacity. The LEM #8 Countertop pairs a rate of up to 3 lbs per minute with a 13 lb body, a sensible match for small batches and limited storage. The BigBite #5 lists a 4 lb capacity, and the BigBite #8 and #12 list 7 lb, so bigger batches need fewer pan refills. At the top end, the VEVOR #22 states up to 13 lbs per minute through a #22 head, which suits long sessions.

Head size, motor rating and throughput

Head size, motor rating and throughput describe three different things, and the listings here show why they should not be merged into one number. The head size, written as #5, #8, #12 or #22, describes the plate and knife diameter class; the motor figure describes power; the pounds-per-minute line describes stated output.

Within this guide the pattern is consistent: the #22 VEVOR states the highest rate, the #12 BigBite follows, and the two #8 models and the #5 state lower figures. Motor figures arrive in mixed units, horsepower for the LEM BigBite line and watts for the VEVOR and the countertop LEM, so stated throughput is the cleaner comparison. Treat every throughput figure as the maker’s own rating under its own conditions, useful for ranking these five models.

Plates and tubes for texture

Plate choice sets the texture of the finished grind, and the listings differ sharply in how much they tell you. The VEVOR #22 and the LEM #8 Countertop print their plate sizes in millimeters; the three BigBite models list plate types without sizes, which limits how precisely a reader can plan a grind from published specs alone.

Where sizes are printed, the pattern is a coarse plate for a chunky grind and a fine plate for a tighter one: 10 mm and 4.5 mm on the VEVOR, 8 mm and 4.8 mm on the countertop LEM. Every model here also lists a stuffing plate and sausage tubes. If your recipes call for one exact plate size, choose one of the two models with printed sizes; the BigBite coarse and fine steps are named but not measured.

Cleaning and storage, as listed

Grinding raw meat makes cleaning part of the buying decision, and the listings vary in what they promise. Only the VEVOR #22 lists dishwasher cleaning, and only for its removable grinding parts; its main body is wiped with a dry cloth and never immersed. The LEM listings do not state a cleaning method in the wording used here.

Where a maker does not print a cleaning method, the careful reading is that none is promised, and the grinding parts should be washed by hand and dried fully before storage. Storage differs across the five as well: the BigBite #12 and #5 build in a storage drawer for plates and tubes, the countertop LEM adds a cord-keeper compartment on its base, and the group spans 13 lb to 33.1 pounds in stated item weight, which decides whether the machine lives on the counter or in a cabinet.

FAQ

Most questions about this category return to the same three printed facts: which models state bone grinding, which plate sizes are actually published, and what the throughput figures mean. The answers below stay inside the maker wording for the five models in this guide and flag the points where makers stay silent.

Which meat grinders for dog food can grind chicken bones?

Two of the five models carry that wording. The LEM Products BigBite #12 states that it can process raw chicken bones, and the VEVOR Commercial Meat Grinder #22 states that it grinds chicken cartilage and chicken bones; the other three models are boneless, as their own wording sets out.

The wording matters as much as the answer. Both bone-stated models name chicken bones specifically, and neither maker extends the claim to beef, pork or other hard bones in the wording used here, so those bones sit outside the stated rating. The BigBite #8 is described by its maker as not for bones, the BigBite #5 carries a note that it cannot process chicken bones, and the LEM #8 Countertop has no bone statement at all.

Can a boneless-only model still prepare dog food?

Yes, within the maker wording. The BigBite #8, the BigBite #5 and the LEM #8 Countertop all carry pet food or raw diet wording from their makers while stating boneless limits or no bone claim, so boneless dog food batches are exactly the work their descriptions cover.

The distinction is about ingredients, not about permission. A boneless model grinds the meat portion of a batch: boneless chicken, turkey, beef, pork and the other meats its maker lists. What it cannot do, by its own wording, is take over the bone portion of a recipe that calls for ground bone. Readers who prepare boneless recipes lose nothing by choosing the smaller machines; readers whose recipes include bone need the bone-stated models, full stop.

Which plate sizes come with these models?

Two models print sizes: the VEVOR #22 lists a 10 mm coarse plate and a 4.5 mm fine plate, and the LEM #8 Countertop lists 8 mm and 4.8 mm plates. The three BigBite models list coarse, fine and stuffing plates by type, and their makers do not print the sizes in the wording used here.

Every model in this guide includes a stuffing plate alongside its grinding plates, and every model lists sausage tubes: three tubes with each BigBite and with the VEVOR, the VEVOR printing its tube sizes as 12 mm, 22 mm and 30 mm, and one plastic stuffing tube with a 7/8 inch outside diameter for the countertop LEM.

What the throughput rating does and does not cover

The pounds-per-minute figure is the maker’s stated grinding rate for the machine: up to 13 lbs per minute for the VEVOR #22, up to 11 for the BigBite #12, about 7 for the BigBite #8, about 4 for the BigBite #5 and up to 3 for the LEM #8 Countertop, each as printed by its maker.

The rating covers the grinding step only. It does not include trimming and cutting meat to size, chilling it, weighing portions, or washing the parts afterward. A session with a small grinder and a large batch is therefore measured in more than the division of pounds by the rated figure. Use the ratings to rank the five models against each other, and expect real sessions to run longer than the arithmetic suggests.

Which models list dishwasher cleaning for the grinding parts?

Only one. The VEVOR #22 lists its blades, grinding plates, sausage stuffing tubes, grinding head, auger and meat pan for dishwasher cleaning, with the main body kept out of water and wiped with a dry cloth. The four LEM listings do not state dishwasher cleaning in their wording.

Silence in a listing should be read as no promise. For the LEM models, plan on hand washing the knife, plates, head and pan after each session and drying them fully before storage. For the VEVOR, follow the split as listed: grinding parts may go in the dishwasher per the maker; the motor body never goes near water.

Conclusion

For dog food with raw chicken bones, the choice narrows to the BigBite #12 and the VEVOR #22, the two models whose makers state that work in print. For boneless batches, the BigBite #8, BigBite #5 and LEM #8 Countertop cover the same pet food ground at smaller sizes, each with its limit stated as plainly as its strengths.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.