Key takeaways
- Five meat grinders for deer compared on maker-stated throughput, head size and plate sets, from a countertop #12 at 4 to 5 pounds per minute to a #22 build.
Deer season compresses a year of grinding into a few long days, and a small grinder turns each animal into an afternoon of repeated small loads. These meat grinders for deer were picked on stated throughput, head size and plate sets, with deer or venison named outright on two of the five maker pages read for this list.
Quick verdict
The five picks split into home countertop machines and commercial counter machines. The Valley Sportsman #12 posts the fastest stated rate here and names deer processing on its page, while the LEM BigBite #12 pairs a near-equal pace with a five-year warranty and a storage drawer.
- For the fastest stated pace with deer named by the maker: Valley Sportsman Electric Commercial Meat Grinder #12, at up to 14 lbs of meat per minute.
- For a home countertop build with a long warranty: LEM BigBite #12 Meat Grinder, at approximately 11 pounds per minute.
- For two speeds and a slower stuffing gear: Weston Pro Series #12 Electric Meat Grinder, at 4 to 5 pounds per minute, with venison in the maker’s meat list.
- For a #22 head on a commercial counter: Eurodib #22 Meat Grinder HM22A, stated at 200 to 300 lbs of meat per hour.
- For a compact commercial #12 with an emergency stop switch: Eurodib #12 Electric Stainless Steel Meat Grinder HLS-HM12N, stated at up to 264 lbs of meat per hour.
Two of the five pages name the animal itself: the Valley Sportsman summary names deer processing, and the Weston copy lists venison among its meats. The other three earn their places on stated output, head class and plate sets.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Valley Sportsman Electric Commercial Meat Grinder #12 | #12 electric grinder | Fast stated pace, deer named | Up to 14 lbs per minute; plates at 4.5mm and 10mm | Heaviest pick at 57.2 lb |
| LEM BigBite #12 Meat Grinder | #12 electric grinder | Home countertop, long warranty | Approximately 11 lbs per minute; plates at 4.5mm and 10mm | No deer wording on the page |
| Weston Pro Series #12 Electric Meat Grinder | #12 electric grinder | Two speeds, venison named | 4 to 5 lbs per minute; plates at 5mm and 8mm | Slowest stated rate here |
| Eurodib #22 Meat Grinder HM22A | #22 electric grinder | Commercial counter volume | 200 to 300 lbs per hour; 1.5 HP gear drive | Output stated as a wide hourly range |
| Eurodib #12 Electric Stainless Steel Meat Grinder HLS-HM12N | #12 electric grinder | Compact commercial counter | Up to 264 lbs per hour; 750 W, 1.1 HP | Plate sizes not stated on the page |
How we selected
Selection rested on printed statements, not brand reputation: a maker’s own deer or venison wording where a page carries it, and stated throughput, head size and plate sets everywhere else. Two models carry the animal wording outright; the other three post output figures in the #12 and #22 classes.
Every pick is an electric countertop or counter grinder with a stated output figure, quoted per minute on three pages and per hour on two. The per-minute floor sits at 4 to 5 pounds on the Weston, and the fastest stated rate reaches 14 pounds per minute on the Valley Sportsman.
Plate sets carried weight beside output: a stated coarse and fine pair counted for more than a plate count alone, and the entries below say where a maker lists no plate sizes at all. Stuffing gear counted too, because deer season usually ends with sausage.
Build rounded out the criteria: metal gearing, stated weights and footprints, and warranty terms as printed. A model whose page stated neither a plate size nor a deer figure had to earn its place on build and output alone, and one of the five does exactly that.
The meat grinders for deer, model by model
The five models below run from a two-speed home #12 at 4 to 5 pounds per minute to a commercial #22 stated in hundreds of pounds per hour. Each entry sticks to what the maker states: animal wording where it exists, output figures, plate sets, included parts, and the limits printed beside them.
Weston Pro Series #12 Electric Meat Grinder
Weston names the meat outright: its copy lists venison among the meats this #12 handles, beside beef, chicken, turkey and bison. The stated pace is 4 to 5 pounds per minute from a 750-watt, 1 hp motor, the slowest figure on this list and the one aimed at steady home sessions.
The deer fit is control rather than speed. Two speeds plus reverse give a fast grind gear and a slower first speed the maker assigns to stuffing, so the same machine that grinds a deer also fills casings without a second unit. The plate pair is stated in millimeters: medium and coarse plates at 5 mm and 8 mm in stainless steel.
The build is die-cast aluminum with metal gears and a cam action headlock, and the box carries two grinding plates, a cutting blade, a sausage stuffing funnel, a stuffing spacer and a stomper. The honest limit is throughput: across several animals in one day, 4 to 5 pounds per minute keeps the crew waiting on the grinder.
- Pro: Maker lists venison among the stated meats
- Pro: Two speeds plus reverse, with a slow speed assigned to stuffing
- Pro: Plates stated at 5 mm and 8 mm in stainless steel
- Con: Slowest stated rate here, at 4 to 5 pounds per minute
- Con: A #12 head, so big days take more loads than a #22
Buy if your deer work is one or two animals at a time and you want stuffing control in the same unit. Skip if several animals land on the same day and stated pace matters more than the second speed.
LEM BigBite #12 Meat Grinder
LEM builds this #12 around a 0.75 HP motor and a stainless steel head, with an approximate grind rate of 11 pounds per minute. That figure sits near the top of the home #12 class, and it arrives with the fullest home accessory set on this list, down to a storage drawer in the body.
The plate set is stated in numbers: three stainless steel plates at 4.5mm and 10mm plus a stuffing plate, a stainless steel knife, and three plastic stuffing tubes at 5/8 inch, 1 inch and 1 3/8 inch outside diameter. A 2 inch head opening takes the pieces a deer breaks down into without fine cubing first.
The supporting figures suit a machine that lives on a home counter: 33.07 pounds, dimensions of 20.24 x 9.13 x 15.98 inches, a 6 foot cord, and a meat pan at 310 x 232 x 108 millimeters. LEM states a five-year warranty, ETL and ETL sanitary certification, and an on/off switch with a sanitary cover. The page carries no deer wording, so the fit rests on output and plates.
- Pro: Approximately 11 pounds per minute in a home #12 body
- Pro: Plates stated at 4.5mm and 10mm plus a stuffing plate
- Pro: Five-year warranty and a built-in storage drawer
- Con: No deer or venison wording on the page
- Con: Stuffing tubes are plastic where rivals use steel
Buy if you process a few deer a season at home and want stated plates, a stated warranty and pace in one unit. Skip if you want the maker’s own deer wording behind the pick, or if your days run to several animals back to back.
Valley Sportsman Electric Commercial Meat Grinder #12
The listing names the job directly: its summary calls this #12 ideal for deer processing, beside commercial use and pet food preparation. The stated rate leads this list at up to 14 lbs of meat per minute, driven by a 750 watt, 1 HP pure copper motor with air-cooled electric fans.
Deer fit rests on that pairing of wording and pace. The plate pair is stated in millimeters, a coarse 10 mm and a fine 4.5 mm in 304 stainless steel, and the box adds three sausage stuffers, a grinder knife and a stomper. An on/off button and a pulse reverse function cover control, and the wider copy names game among its meats.
The build runs commercial: a permanently lubricated induction motor, a built-in circuit breaker, overheating protection and non-slip feet, all under ETL certification. The trade-offs are size and coverage: 57.2 lb and 23.25 x 18.32 x 14.18 inches make it the largest footprint here, and the stated warranty is a 1 year limited term where the LEM states five years.
- Pro: Page names deer processing outright
- Pro: Fastest stated rate here, up to 14 lbs per minute
- Pro: Plates stated at 10 mm and 4.5 mm in 304 stainless steel
- Con: Heaviest and largest pick at 57.2 lb
- Con: Warranty stated at 1 year, the shortest term here
Buy if you want the maker’s deer wording with the fastest stated pace in a #12 head. Skip if the machine must move between storage and counter each session, or if a longer stated warranty matters more than pace.
Eurodib #22 Meat Grinder HM22A
Eurodib’s #22 is the commercial counter option, built around a 1.5 HP, 1100W gear-driven motor in stainless steel. The description states a processing range of 200 to 300 lbs of meat per hour, and the #22 head class is the step up hunters take when a #12 becomes the bottleneck on multi-animal days.
The deer argument is class and construction rather than wording: the page prints no deer or game line, so the fit rests on the #22 head, the stated hourly range and a gear drive built for counter work in professional kitchens. A switch on the unit stops it from running while the hopper is open, and a tray catches the ground meat.
Electrical figures are fully stated: 110V, 10A, with a NEMA 5-15P plug, so the unit runs on a standard circuit where the largest commercial grinders ask for more. ETL and UL certifications for the US and Canada appear on the page. The limits are the wide output range, which makes pace planning looser than a single stated figure, and plate sizes the page does not state at all.
- Pro: A #22 head with a 1.5 HP gear-driven motor
- Pro: Runs on 110V with a standard NEMA 5-15P plug
- Pro: Stainless steel construction with a ground-meat tray included
- Con: Output stated as a wide range, 200 to 300 lbs per hour
- Con: No plate sizes and no deer wording on the page
Buy if your deer days have outgrown a #12 and you want commercial construction on a standard circuit. Skip if you plan grinds by stated plate sizes, or if a single precise throughput figure matters for planning the day.
Eurodib #12 Electric Stainless Steel Meat Grinder HLS-HM12N
The smaller Eurodib keeps the commercial build in a #12 head: the maker states up to 264 lbs of meat per hour from a 750 W, 1.1 HP motor drawing 6.8 Amps at 110 V. The body mixes anodized aluminum alloy with stainless steel, a lighter recipe than the all-stainless #22 above it.
For deer work the case is steady commercial output in a counter footprint, with a waterproof emergency stop switch as the control highlight and a tray included for ground meat. The maker describes the alloy as resistant to acid, salt and rust, and the components as built to strip down easily for cleaning after a long session.
The page states no plate sizes and no deer wording, so texture planning leans on the plates in the box rather than printed figures, and the fit rests on the hourly rate and the #12 class. Buyers who grind to a recipe measured in millimeters will find the LEM and Valley Sportsman pages fuller on that point.
- Pro: Up to 264 lbs per hour in a #12 commercial build
- Pro: Waterproof emergency stop switch
- Pro: Anodized aluminum alloy and stainless steel construction
- Con: Plate sizes not stated on the page
- Con: No deer or venison wording on the page
Buy if you want commercial construction and a stated hourly rate without stepping up to a #22 head. Skip if stated plate sizes guide your grind planning, or if the maker’s own deer wording matters to the purchase.
Buying guide
A deer grinder purchase turns on three stated facts: the output figure, the head size and the plate set. Read those three lines on any maker’s page first, and let the season you actually hunt, not the largest season you can picture, set the size of the machine that comes home.
Throughput sets the pace of processing day
Stated output on this list runs from 4 to 5 pounds per minute on the Weston to up to 14 on the Valley Sportsman, with the Eurodib pair quoted per hour instead. The gap compounds across a whole animal: at the slow end the grinder sets the day’s rhythm, and at the fast end the cutting board does.
Read each figure as the maker’s claim under steady feeding of prepared pieces. Trimming, cubing and packing all run at hand pace, so a figure far beyond your crew’s knife speed buys less than it promises. Match the rate to the largest day you face in a normal season.
Head size and throat room on meat grinders for deer
Four of the five picks wear #12 heads, the home and light commercial class, and one wears a #22. The #12 case is load count: the head takes smaller pieces and more of them, which suits an animal or two at a time. The #22 case is the opposite, fewer and larger loads across a longer day.
Throat and head openings decide the knife work before the grind. The LEM states a 2 inch head opening, and larger openings take larger pieces, which shortens cubing across a whole deer. Where a maker states no opening figure, plan on smaller pieces and a slower feed.
Plate pairs cover burger, chili and sausage grinds
The stated pattern on the fuller pages is a coarse plate near 10mm and a fine plate near 4.5mm, printed by both LEM and Valley Sportsman. Coarse plates feed chili meat and the first pass of a two-pass batch, while fine plates finish burger blends and sausage mixes with a tighter texture.
Weston varies the pair at 5 mm and 8 mm, a closer spacing that leans toward burger and sausage textures over very coarse chili grinds. The Eurodib pages state no plate sizes, so a buyer who cooks by millimeter should weigh that gap against their commercial build.
Two speeds, reverse and the stuffing half of the job
Deer season rarely ends at grinding: sausage follows, and the controls decide how one machine covers both jobs. Weston’s second, slower speed is assigned by the maker to stuffing, and its reverse clears the head without opening it. Valley Sportsman answers with a pulse reverse on a single-speed unit.
Stuffing gear counts beside controls. Every pick here lists stuffing equipment, from Weston’s funnel and spacer to the three-tube sets on the LEM and Valley Sportsman, so the comparison is tube sizes and plate support rather than presence or absence.
Weight, footprint and storage between seasons
A deer grinder works hard for a few weeks and sits stored for the rest of the year, so weight and footprint belong in the purchase call. The LEM states 33.07 pounds and the Valley Sportsman 57.2 lb, and that gap decides whether the machine travels to the counter or lives on it.
Storage details help across the off-season: the LEM drawer keeps plates and tubes with the machine, and a stated footprint lets you measure the shelf before the season arrives. A grinder stored complete, with its plates and knife together, starts the first day of the season ready.
FAQ
Most questions about deer grinders come back to stated output, head size and which makers print the word deer at all. The answers below stay inside those printed lines, model by model, so the figures quoted here match the figures in the entries above them.
How fast do meat grinders for deer need to be?
Match the stated figure to the largest day you face. The 4 to 5 pounds per minute on the Weston covers one or two animals at a steady pace, approximately 11 on the LEM and up to 14 on the Valley Sportsman suit longer days, and the #22 Eurodib states its pace per hour for commercial counters.
Every figure assumes steady feeding of trimmed, cubed meat. Once the grinder outruns the knives, extra stated pace stops shortening the day, which is why mid-range figures satisfy most home seasons.
Which models name deer or venison on their pages?
Two do. The Valley Sportsman summary names deer processing among its uses, and the Weston copy lists venison in its meat list beside beef, chicken, turkey and bison. Those two pages carry the animal in the maker’s own words, and their entries above claim nothing beyond that wording.
The LEM and both Eurodib models print no deer wording on the pages read for this list. Their places rest on stated throughput, head class and plate sets, and a buyer who wants the animal named by the maker has the two picks above.
Is a #12 grinder enough for deer season?
For one or two animals at a time, the stated figures say yes: the #12 picks run from 4 to 5 pounds per minute up to 14, and the class covers the standard home season of a few deer spread across several weekends. Loads are smaller and more frequent than a #22, and the day runs longer for it.
The #12 case weakens as the day stacks up. Several animals back to back turn the smaller head into the bottleneck, which is the workload the single #22 on this list, the Eurodib HM22A, exists to absorb.
Can these grinders stuff sausage as well?
Yes, every pick lists stuffing gear. Weston includes a stuffing funnel and spacer with a slow speed assigned to the work, LEM includes a stuffing plate and three tubes stated at 5/8 inch, 1 inch and 1 3/8 inch, and Valley Sportsman includes three sausage stuffers with its plate pair.
The Eurodib entries list trays rather than tube sets on their pages, so a buyer whose season ends in large sausage batches should weigh the three home picks’ stated tube sets against the commercial pair’s output.
Conclusion
Deer season rewards stated pace and stated plates: the Valley Sportsman names deer processing at up to 14 lbs per minute, the LEM pairs 11 pounds per minute with a five-year warranty, and the Eurodib #22 covers the longest days. Match the figure to your season and the grinder keeps pace through the last load of the last animal.