Updated Nov 15, 2026· 13 min read

Key takeaways

  • Five meat grinders for elk compared on stated throughput and head size, from a #22 at 30 pounds per minute to a #32 first grind rated at 55 pounds per minute.

Elk is the largest animal in this series, so this list argues fit the plain way throughout: stated throughput and stated head size, with no invented batch claims. These meat grinders for elk run from a #22 at 30 pounds per minute to a #32 first grind of 55, and one maker’s page names elk outright in its own copy.

Quick verdict

The Pro-Cut KG-32 posts the highest stated figure here by a wide margin, a 55 pound per minute first grind, and it asks for three-phase power in return. Below it, the LEM BigBite #32 is the pick that names elk in its own copy, at an average of 17 pounds per minute on a standard circuit.

  • For the highest stated output: Pro-Cut KG-32 Meat Grinder, at 55 lb per minute on the first grind and 29 on the second.
  • For a #22 with a commercial duty cycle: Pro-Cut KG-22-XP-SS Meat Grinder, at 30 lb per minute on the first grind.
  • For the fastest #32 on a full spec sheet: VEVOR #32 Electric Meat Grinder, at 21 lbs per minute with plates stated in millimeters.
  • For an all-stainless #32 build: MEAT! 1.5 HP Commercial Grinder (#32), at up to 18 lbs of ground meat per minute.
  • For elk named by the maker: LEM Big Bite Meat Grinder #32, at an average of 17 lbs per minute with a five-year warranty.

Only one page here names the animal: the LEM copy lists game meat like venison or elk. The other four picks rest on stated throughput and head size alone, which is the honest ground for an animal this large.

Product Type Best for Key spec Main limit
Pro-Cut KG-32 Meat Grinder #32 electric grinder Highest stated output 55 lb per minute first grind; 3 HP, 100% duty cycle Needs 220V three-phase power
Pro-Cut KG-22-XP-SS Meat Grinder #22 electric grinder Commercial #22 pace 30 lb per minute first grind; throat 5.5 x 6.5 inches at top 220V, and the buyer supplies the plug end
VEVOR #32 Electric Meat Grinder #32 electric grinder Full stated spec sheet 21 lbs per minute; plates at 10mm and 4.5mm No elk wording on the page
MEAT! 1.5 HP Commercial Grinder (#32) #32 electric grinder All-stainless build Up to 18 lbs per minute; 1.5 HP motor Plate sizes and weight not stated
LEM Big Bite Meat Grinder #32 #32 electric grinder Elk named by the maker Average 17 lbs per minute; plates at 3/16 and 3/8 inch Slowest stated rate of the #32 group

How we selected

Selection for elk rested on two printed lines per page: the stated throughput and the stated head size. An animal this large turns selection into arithmetic, so every pick posts a first-grind figure of 17 pounds per minute or more, and every head is a #22 or a #32. One page adds the maker’s own elk wording.

Power supply counted as a selection fact, not a footnote. The five picks split across three-phase 220V, single-phase 220V and a standard 120V circuit, and a grinder that cannot run in the building where the elk is processed does not fit, whatever its figure says.

Plate sets and throats carried the next weight. Stated plate sizes in inches or millimeters, a stated throat opening, and a stated duty cycle all counted, because a second grind at a stated pace matters on an animal that fills this many trays.

Build finished the criteria: stainless headstocks and augers, steel gearing, and stated weights from 59.3 lbs to 260 lbs. Where a page stated no plate size or no weight, the entry below says so rather than borrowing the figure from anywhere else.

The meat grinders for elk, model by model

The five models below are ordered by the size of the job they state, from a 3 HP three-phase #32 down to a #32 that runs on a household circuit. Each entry sticks to what the maker states: throughput, head size, plate sets, power requirements, and the limits printed beside them.

Pro-Cut KG-32 Meat Grinder

The KG-32 posts the largest figures in this series: a #32 grinding head with a 4 inch plate diameter, a first grind of 55 lb per minute through a 3/8 inch plate and a second grind of 29 lb per minute through a 1/8 inch plate, with meat at 32 degrees F. A 100% duty cycle backs the numbers for nonstop runs.

Size carries through the rest of the page. The throat measures 7.25 inches at the top, the feed tray measures 4 x 22.5 x 36 inches with an inside of 31.5 x 16.3 x 3 inches, and the box includes a #32 plate with 3/16 inch holes, a stainless knife and a heavy duty stomper. At elk scale, that tray and throat are the point: fewer, larger loads.

The limits are power and footprint. The motor is a high torque 3 HP, 3-phase unit on 220V and 30 amps with a NEMA L15-20P twistlock plug, and the machine weighs 260 lbs across 21.5 x 46.5 x 24 inches. NSF and UL certification and a 1 year warranty are stated, and the unit is made in Mexico.

  • Pro: Highest stated output here, 55 lb per minute on the first grind
  • Pro: 100% duty cycle with a #32 head and a 4 inch plate
  • Pro: Largest stated tray and throat on this list
  • Con: Requires 220V three-phase power at 30 amps
  • Con: At 260 lbs it is a fixed installation, not a countertop unit

Buy if your processing space has three-phase power and elk days run long enough to use a 55 pound per minute first grind. Skip if the building runs standard circuits only, because this machine cannot follow you there.

Pro-Cut KG-22-XP-SS Meat Grinder

The KG-22-XP-SS is the #22 that outruns two of the #32 picks: with meat at 32 degrees F it grinds 30 lb per minute on the first grind through a 3/8 inch plate and 16 lb per minute on the second grind through a 1/8 inch plate, on a 100% duty cycle from a high torque 2 HP motor.

Feeding room is the second argument. The throat measures 5.5 x 6.5 inches at the top and funnels to a 3 x 4 inch auger inlet, the plate is 3.25 inches in diameter, and the feed tray measures 3 x 15 x 28 inches. A 3/16 inch plate, a stainless knife and a heavy duty stomper come in the box, and the headstock, screw, housing and pan are stainless steel.

The build runs through an oil bath gearbox with all steel gears and a washerless head design. The stated figures are 140 lbs, 16.3 x 31.1 x 20.5 inches, 220V single-phase at 9 amps, a 75 inch cord, NSF and UL certification and a 1 year warranty. Two limits print plainly: the unit is not reversible, and the buyer supplies the plug end to match the 220V outlet.

  • Pro: 30 lb per minute first grind from a #22 head
  • Pro: Widest stated throat opening on this list
  • Pro: 100% duty cycle, oil bath gearbox, all steel gears
  • Con: 220V power, with the plug end supplied by the buyer
  • Con: Not reversible, per the maker’s spec table

Buy if you want commercial pace and feeding room on single-phase 220V, one step below the three-phase class. Skip if your space offers only 120V circuits, or if reverse is part of how you clear a loaded head.

VEVOR #32 Electric Meat Grinder

VEVOR’s #32 posts the fullest consumer spec sheet here: a 1100W, 1.5 HP motor, a stated grinding capacity of 21 lbs per minute, and a 3-stage auger system. The listing copy names venison and hunting meat processing among its uses, which puts game wording on the page even though elk itself goes unnamed.

The plate set is stated to the millimeter: a 10mm coarse plate pre-installed, a 4.5mm fine plate, and a stuffing plate, with two cross blades and three sausage tubes at 12mm, 22mm and 30mm. For elk work that pairing covers the standard run, a coarse first pass for chili meat and a fine second pass for burger blends.

The remaining figures are equally plain: 59.3 lbs, dimensions of 25.6 x 12.2 x 19.1 inches, and an ETL listing. That weight makes it the lightest #32 here by a wide margin and the only one a single person moves without planning the lift. The limit is the unnamed animal: the elk case rests on the 21 lbs per minute figure and the #32 head.

  • Pro: 21 lbs per minute with plates stated at 10mm and 4.5mm
  • Pro: Listing names venison and hunting meat processing
  • Pro: Lightest #32 here at 59.3 lbs
  • Con: Elk itself is not named on the page
  • Con: A newer nameplate beside long-running commercial brands

Buy if you want #32 pace with every plate and tube size printed, in a body one person can move. Skip if the maker’s own elk wording matters to the purchase, because only one page in this list carries it.

MEAT! 1.5 HP Commercial Grinder (#32)

MEAT! states the case for its #32 in one line: a 1.5 HP motor that generates up to 18 lbs of ground meat per minute. The build around that figure is all stainless steel, head and body, which suits a machine that lives on a processing bench through a long season of large animals.

For elk, the argument is the pairing of that stated rate with the #32 head class. Eighteen pounds per minute sits above the LEM #32’s stated average and below the VEVOR’s figure, in the band where a two-person crew, one cutting and one feeding, keeps the head working without rushing the knives.

The page runs thinner than its rivals in two places, and the entry records both. Plate sizes arrive without millimeter figures in the fetched text, and no unit weight or voltage is stated there either, so texture planning and bench planning lean on the maker’s other channels. Neither gap touches the output claim, which is the reason the grinder is here.

  • Pro: Up to 18 lbs of ground meat per minute, stated by the maker
  • Pro: All-stainless build across head and body
  • Pro: A #32 head from a game-processing brand
  • Con: Plate sizes not stated in numbers on the page
  • Con: Weight and voltage not stated on the page

Buy if stated pace in an all-stainless #32 matters most and your crew processes in long runs. Skip if you plan textures by millimeter plate sizes, or if a stated weight matters for your bench or cart.

LEM Big Bite Meat Grinder #32

LEM carries the only elk wording in this list: its copy describes grinding game meat like venison or elk. The stated pace is an average of 17 lbs per minute from a 1.5 HP, 1100 watt motor on 120V at 13 amps, which makes this the one #32 here that runs on a standard household circuit.

The plate set is stated in inches: stainless plates at 3/16 inch and 3/8 inch, a stainless knife and a kidney plate, with stuffer tubes at 5/8 inch, 1 inch and 1-3/8 inch. A 3 inch throat takes the pieces an elk breaks down into, and a front storage drawer keeps the plates and tubes with the machine between seasons.

The supporting build is stated in full: all steel gears with roller bearings, a rifled headstock, a built-in circuit breaker, ETL certification and a five-year warranty, the longest term on this list. At 75 lbs and 12 x 24 x 19 inches it is heavy but movable. The limit is pace: 17 lbs per minute is the slowest stated figure of the #32 group.

  • Pro: Maker names elk in its own copy
  • Pro: Runs on 120V at 13 amps, no special circuit
  • Pro: Five-year warranty, the longest stated here
  • Con: Slowest stated rate of the #32 picks
  • Con: At 75 lbs it still wants a settled bench spot

Buy if you want the maker’s elk wording with #32 size on a household circuit, backed by a five-year warranty. Skip if your days run to several elk and the stated pace of the Pro-Cut pair matters more than the plug.

Buying guide

An elk grinder purchase turns on stated throughput, head size and the power supply in the room where the work happens. Read those three lines first on any maker’s page. The largest figure in this list is unusable without three-phase power, and that single fact reorders the ranking for most homes.

Throughput is the whole argument at elk size

Stated first-grind figures here run from an average of 17 lbs per minute to 55, and the spread decides how a processing day feels. At the low end the grinder shares the work with the crew; at the high end the knives become the bottleneck and the head waits on the cutting board between loads.

Read each figure with its plate attached. The Pro-Cut rates are quoted through a 3/8 inch plate with meat at 32 degrees F, and a fine second grind runs slower on every machine here, 29 and 16 lbs per minute on the two Pro-Cut models. Plan the day on the second figure, not the first.

Head size and throat room on meat grinders for elk

Head size sets piece size before it sets pace. A #32 plate measures 4 inches across on the KG-32 and a #22 plate 3.25 inches on the KG-22-XP-SS, and the throats follow: 7.25 inches at the top of the KG-32, 5.5 x 6.5 inches on the KG-22, and 3 inches on the LEM #32.

Larger openings take larger pieces, which shortens the cubing work across an animal the size of an elk. Where a maker states no throat figure, as with the MEAT! and VEVOR pages here, plan on smaller pieces and a steadier hand at the feed.

Power supply: the honest split in this list

Three of the five picks ask for more than a household outlet. The KG-32 needs 220V three-phase at 30 amps with a twistlock plug, and the KG-22-XP-SS needs 220V single-phase at 9 amps with the plug end supplied by the buyer to match the outlet in the room.

The LEM #32 stands alone on a standard circuit at 120V and 13 amps. That single line decides the list for most home processors: the two fastest stated figures belong to machines that need wiring the average garage does not have.

Duty cycle and the second grind

Both Pro-Cut models state a 100% duty cycle, which is the maker’s way of saying the motor runs continuously without rest breaks across a long day. On an animal that fills tray after tray, that line matters as much as the headline figure, because a duty limit turns into standing time mid-animal.

The second grind deserves the same attention. Burger blends take two passes on a single-grind head, and the stated second-grind figures here, 29 lb per minute on the KG-32 and 16 on the KG-22, are the numbers a sausage and burger day actually runs on.

Weight, freight and where the machine lives

Stated weights run from 59.3 lbs on the VEVOR to 260 lbs on the KG-32, and the top of that range ships and sits like equipment, not like an appliance. The KG-22 at 140 lbs and the KG-32 both belong on a settled bench or stand, planned before the season rather than during it.

Storage works the other way for the lighter #32 pair. The LEM drawer keeps plates with the machine, and at 75 lbs and 59.3 lbs the LEM and VEVOR can share a cart or a heavy shelf. Measure the space against the stated dimensions before the animal is hanging.

FAQ

Most questions about elk grinders come back to stated output, power supply and which makers print the word elk at all. The answers below stay inside those printed lines, model by model, so the figures quoted here match the figures in the entries above them.

How much throughput do meat grinders for elk need?

Start from the stated figures that exist: an average of 17 lbs per minute is the floor in this list, and it belongs to a #32 that names elk in its copy. The working band runs through 18 and 21 lbs per minute in the #32 class, up to 30 on the #22 Pro-Cut and 55 on the three-phase KG-32.

The right point in that band is set by crew and wiring, not by the animal alone. A stated figure only shortens the day while the crew can cut and feed at that pace, and only in a room wired for the machine.

Which models name elk on their pages?

One does. The LEM Big Bite #32 copy describes grinding game meat like venison or elk, and that wording is the maker’s own. The VEVOR listing names venison and hunting meat processing, which covers game work without naming elk itself. No other page in this list prints the animal’s name.

The two Pro-Cut models and the MEAT! #32 print no elk wording on the pages read for this list. Their places rest on stated throughput and head size, the ground the brief for this list set from the start.

Is a #22 grinder enough for elk, or is #32 the floor?

The stated figures say a #22 can lead on pace: the KG-22-XP-SS posts 30 lb per minute on the first grind, above two of the three #32 figures here. What the #22 gives back is feeding room, a 3.25 inch plate and a smaller throat than the KG-32’s 4 inch plate and 7.25 inch throat.

So the split is not capacity but workflow. A #22 at this level grinds an elk at commercial pace in smaller pieces; a #32 takes larger pieces per load. Both statements come off the makers’ own spec lines.

What power supply do the largest picks need?

The KG-32 needs the most: 220V, three-phase, 30 amps, through a NEMA L15-20P twistlock plug. The KG-22-XP-SS needs 220V single-phase at 9 amps, and its cord ships without an end, so the buyer supplies the plug that matches the outlet. Both figures come straight off the makers’ spec lines.

At the other end, the LEM #32 runs on 120V at 13 amps, a standard household circuit. The MEAT! and VEVOR pages read for this list state no voltage figure, so a buyer counting circuits should get that line from the maker before ordering.

Conclusion

Elk rewards stated figures over everything else: the KG-32 leads at 55 lb per minute for rooms with three-phase power, the LEM #32 names elk and runs on a household circuit, and the #22 Pro-Cut splits the difference. Match throughput, head size and wiring to your space, and the pace follows on the longest days.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.