Updated Nov 15, 2026· 14 min read

Key takeaways

  • Meat grinders for home use compared on stated grind rate, head size, plate and tube sets, weight and storage, from compact electrics to a manual hand crank.

Home grinding covers more ground than one machine style: a deer each season, a weekly burger batch, a mixer that already sits on the counter, or a cabin with no spare outlet. The meat grinders for home use below span compact electrics stating 4 to 7 pounds a minute, a stand mixer attachment and a hand-cranked classic.

Quick verdict

The LEM Big Bite #8 is the home benchmark in this group: a 0.5 HP motor, a stated rate of about 7 pounds per minute, metal gears with roller bearings and a five year warranty in a 28.66 pound machine. The Big Bite #5 keeps the same design smaller and lighter for one or two deer a season and store-bought primal cuts.

The Weston Pro Series #8 states the strongest figures of the countertop electrics here at 0.75 HP and 6 pounds per minute. The KitchenAid Metal Food Grinder Attachment turns a stand mixer the household already owns into the grinder, and the Weston #10 Manual needs no electricity at all, clamping to a table and cranking by hand.

Model Motor as stated Stated output Head size Weight
LEM Big Bite #8 (LEM-17791) 0.5 HP About 7 lb per minute #8 28.66 lb
Weston Pro Series #8 (10-0801-W) 0.75 HP, 560 watts 6 lb per minute #8 Not stated
LEM Big Bite #5 (LEM-17771) 0.35 HP About 4 lb per minute #5 26.46 lb
KitchenAid Metal Food Grinder Attachment (KSMMGA) Uses the stand mixer motor Not stated Attachment 2.5 lb
Weston #10 Manual Meat Grinder (36-1001-W) Hand crank Not stated #10 Not stated

How we selected

Home use is a wide brief, so the filter favored machines a household can store, lift and feed without a production setup: stated rates between 4 and 7 pounds per minute for the electrics, weights under 30 pounds where stated, and head sizes from #5 to #10 that match the plates and tubes sold everywhere for home machines.

Two non-standard entries earned their places on stated facts. The KitchenAid attachment counts because millions of home kitchens already own its motor, the stand mixer, and its metal build and three-plate set are stated plainly. The Weston manual counts because its listing frames it for household grinding and stuffing with no electricity, a real use case for cabins, camps and small batches. Everything else here is a self-contained countertop electric with a stated rate.

  • A stated grind rate for each self-contained electric model
  • Metal gears and roller bearings where the maker prints them
  • Plates and stuffing tubes included, sized for home batches
  • Storage drawers, cases or clamp-on mounting for small kitchens
  • One attachment and one manual model, each framed for home use

Meat grinders for home use, model by model

The order runs from the most capable all-round electric through its smaller sibling and the strongest stated #8, then to the two machines that borrow their power from something else: a stand mixer the household already owns, and the cook’s own arm at the crank.

LEM Big Bite #8 Stainless Steel Electric Grinder (LEM-17791)

The Big Bite #8 is LEM’s middle home machine: a 0.5 HP high-torque motor on 110 volts, a #8 stainless head, and a stated grind rate of about 7 pounds per minute, which the maker also frames as 420 pounds per hour. The drive uses metal gears with roller bearings, and a built-in circuit breaker protects the motor.

LEM’s own framing sets the audience: a household that processes a deer a season, grinds three to five deer a year, or makes the occasional batch of burgers for the family. The included set supports that range, with a stainless knife, head, auger and large meat pan, three stainless plates at 4.5 mm, 10 mm and a stuffing plate, three stuffing tubes at 1/2 inch, 1 inch and 1 3/8 inch outside diameter, a meat stomper and an auger puller.

The maker lists a stainless steel motor housing, a 2 inch head opening, dimensions of 18.5 by 9.13 by 15.59 inches, a weight of 28.66 pounds, a 6 foot cord, a storage drawer, a covered on/off switch and a noise-dampening design. Certification is listed as ETL and ETL sanitary conforming to UL standards, and the warranty runs five years with lifetime customer support. It is the most completely specified home grinder in this roundup.

LEM Big Bite #5 Stainless Steel Electric Grinder (LEM-17771)

The Big Bite #5 is the most compact grinder in LEM’s Big Bite line by the maker’s own description, built around a 0.35 HP motor and a #5 stainless head with a stated rate of about 4 pounds per minute, or 240 pounds per hour. The motor is permanently lubricated, the gears are metal with roller bearings, and a circuit breaker is built in.

LEM frames this one for one or two deer per season, or for primal cuts bought at the store and ground at home, which is the most common home pattern of all: a pork shoulder for sausage, a chuck roast for burgers, ground fresh the day it is cooked. The plate set matches the #8 model, 4.5 mm, 10 mm and a stuffing plate in stainless steel, with a stainless knife and three stuffing tubes at 1/2 inch, 1 inch and 1 1/8 inch outside diameter.

Stated dimensions are 17.44 by 9.13 by 13.90 inches and the weight is 26.46 pounds, the lightest self-contained electric here, with a storage drawer, a covered switch and the same noise-dampening design as its sibling. The maker lists ETL certification and a five year warranty with lifetime customer support. For small households that grind a few pounds at a time, this is the proportionate choice in the LEM line.

Weston Pro Series #8 Meat Grinder (10-0801-W)

Weston’s Pro Series #8 states the strongest motor figures among the countertop electrics in this group: 0.75 HP and 560 watts, with a stated grind speed of 6 pounds per minute through its #8 head. Those are the maker’s own comparison figures for the model, and they put it ahead of the LEM #8 on power while sitting in the same head size class.

That positioning is the story of this model: it is the entry step into Weston’s Pro Series line, the same family as the larger #22 and #32 machines in this project’s high volume roundups, scaled to a #8 head for home counters. A household that expects its batches to grow, from a few pounds of burger blend toward a full deer plus sausage in a day, gets headroom from the stronger motor without moving to a bench machine.

The trade is paperwork: the pages behind this roundup state the motor, wattage, rate and head size for this model, and leave its plate set, weight and warranty terms unstated, so a buyer comparing small print will find less of it here than in the LEM sections. What is stated is the part that decides grinding days. Six pounds a minute clears a ten pound batch in under two minutes of grinding, and 0.75 HP behind a #8 head is a combination built to hold that pace on the second grind.

KitchenAid Metal Food Grinder Attachment (KSMMGA)

The KitchenAid Metal Food Grinder Attachment takes a different route to the same job: it mounts on the power hub of any KitchenAid stand mixer and lets the mixer do the work, so a household that already owns the mixer adds grinding without adding a second motor to the kitchen. The attachment itself is metal and weighs 2.5 pounds.

Three grinding plates cover the home range, fine at 3 mm, medium at 4.5 mm and coarse at 6 mm, and the maker lists uses from fresh meat and cheese to bread crumbs and vegetables. Two sausage stuffer tubes are included, the larger for kielbasa and bratwurst and the smaller for breakfast sausage, with a sausage stuffer plate. The removable food tray is larger than the one on the maker’s earlier FGA model, and the metal body can be pre-chilled in the refrigerator or freezer to hold a cold grinding temperature.

Everything packs into a storage case that holds the grinder and all its parts, which is the storage answer for small kitchens: no drawer of loose plates. The included list runs to the grinder, tray, three plates, a cleaning brush, a food pusher, both stuffer tubes and the stuffer plate. The maker lists a one year warranty for the attachment, and marks it for hand washing rather than dishwasher cleaning. No grind rate is stated, since pace depends on the mixer that drives it.

Weston #10 Manual Meat Grinder and Sausage Stuffer (36-1001-W)

The Weston #10 is the traditional answer: a hand-cranked grinder in tin-plated cast iron that clamps to a table or countertop and needs no electricity. Its listing frames it for household grinding and stuffing, and the maker highlights it for processing deer and other wild game, which is where a crank grinder earns its keep at camps and cabins.

Two face plates cover medium and coarse grinding at 4.5 mm and 10 mm, and the stuffing side includes a funnel, star and flange for filling casings by crank. The auger runs on a heavy-duty nylon bearing, and the tin coating gives the cast iron its working finish. The grinder ships with a protective coat that comes off before the first use, a standard step for cast iron food tools.

Pace is whatever the arm provides, steady rather than fast, and batch size is realistically a few pounds at a time, ground as needed. In exchange, the machine has no motor to burn out, no cord to route and nothing electrical to wash around, and it works during a power outage or at a hunting camp table. As the one manual model in a home-use roundup, it covers the households the electrics cannot reach.

Buying guide

Choosing among machines this different comes down to four questions: how much meat arrives at once, what already lives in the kitchen, where the machine will be stored, and whether sausage is part of the plan. The sections below take those questions in order, using the stated figures for these five models.

Choosing between meat grinders for home use by batch size

Batch size sorts this group quickly. A few pounds at a time, a pork shoulder or a small roast, suits the Big Bite #5 at 4 pounds per minute, the KitchenAid attachment, or even the manual #10. Weekly batches of ten to twenty pounds suit the #8 machines, where the LEM states about 7 pounds per minute and the Weston states 6 with a stronger motor.

Seasonal volume, several deer across a fall, is the LEM #8 maker’s stated home ground at three to five deer a year. Past that pattern, a household is shopping in the high volume class instead, with #22 heads and stated rates in the teens. Being honest about the biggest regular batch matters more than the biggest imaginable one: a machine sized for the regular batch gets stored closer, set up faster and used more.

Electric, attachment or manual

A self-contained electric is the default for a reason: its motor, head and controls are one unit that clamps nothing and borrows nothing. The attachment earns its place when counter and cabinet space are the binding limits, since it stores in its own case at 2.5 pounds and the motor already lives on the counter as the household’s mixer.

The manual grinder answers a different set of limits: no outlet at the camp table, no wish to run a motor during a quiet morning, or batches small enough that setup of an electric takes longer than the grinding. Its stated plate pair, 4.5 mm and 10 mm, covers the two textures most home cooking uses. The trade of the choice is pace and effort, paid a few pounds at a time.

Plates and tubes for the home menu

The plate sets converge on the same working pair, a medium plate near 4.5 mm and a coarse plate near 10 mm, which between them cover burgers, meatloaf, chili and the first pass of most sausage recipes. The KitchenAid set adds a fine 3 mm plate, and the LEM sets add a stuffing plate that the Weston manual matches with its funnel, star and flange.

Tube counts differ: three sizes on each LEM, two on the KitchenAid, one funnel setup on the manual. A household making snack sticks and breakfast links needs the narrow tubes; a household filling large casings needs the wide one. Check the set against the casings in the pantry before choosing, because tubes are head-size specific and the set in the box is the set that gets used.

Storage, weight and the drawer test

Stated weights for the electrics run from 26.46 to 28.66 pounds, light enough to move between counter and cabinet, heavy enough to sit steady while feeding. The LEM models add a storage drawer in the housing, which passes the drawer test: plates, knife and tubes live inside the machine instead of migrating through the kitchen.

The attachment wins the storage contest outright with its fitted case, and the manual clamps away in a cupboard with no cord to coil. Measure shelf depth against the stated dimensions, 18.5 inches deep for the LEM #8 and 17.44 for the #5, and remember the meat pan adds width at the top. A grinder that fits where it is stored is a grinder that gets used on a weeknight.

Warranty and certification on home machines

Stated coverage in this group runs from one year on the KitchenAid attachment to five years with lifetime customer support on both LEM models, which is unusually long backing for a countertop appliance and reflects the maker’s hunting-season audience. The Weston pages behind this roundup do not state warranty terms for the #8 or the manual model.

Certification follows a similar pattern: LEM lists ETL and ETL sanitary certification conforming to UL standards for the #8, and ETL certification for the #5. For a home buyer, the practical reading is that the LEM pair publish the most complete paperwork in this group, and households that keep machines for a decade tend to value the longer stated coverage.

FAQ

Home buyers ask how these machines handle game meat, whether an attachment can keep up, what a manual grinder is really for, and how the small electrics compare with each other. The answers use the makers’ stated figures and framing for these five models.

Which meat grinders for home use suit a first-time buyer?

A first-time buyer is best served by the machine whose stated framing matches their kitchen: the Big Bite #5 for a few pounds at a time, with the same plates and warranty as its larger sibling, or the KitchenAid attachment if a stand mixer already lives on the counter and storage space is the true limit.

What a first purchase should include, whichever style wins, is a medium and a coarse plate, at least one stuffing option, and parts storage that keeps the set together. All five models here meet that bar. The manual #10 is the exception to recommend carefully: it suits a buyer who specifically wants crank power, not a buyer expecting electric pace.

Can these grinders handle deer and game meat?

Yes, within each maker’s stated framing. LEM rates the Big Bite #8 for three to five deer a year and the #5 for one or two deer per season, and the Weston manual’s listing highlights processing deer and other wild game. Game is lean and full of sinew, so trimming matters more than motor size at this scale.

The working method is the same across the group: chill the meat until it is firm at the edges, cut it to the head opening, and grind in tray-sized lots. Silver skin removed at the table never reaches the plate. A household processing one deer in an afternoon will finish comfortably on any of the electrics here; the manual turns the same job into an afternoon of cranking.

Is a stand mixer attachment strong enough for regular grinding?

The attachment’s pace and strength come from the mixer that drives it, and KitchenAid states no grind rate for the attachment, so the honest answer is that it depends on the mixer model and the batch. For the pattern it is built for, a few pounds of meat for burgers, meatballs or sausage, the metal build and three-plate set are stated and complete.

Where an attachment reaches its limit is session length: a stand mixer is a general-purpose motor, and long continuous grinding is harder on it than the short jobs it was designed around. Households grinding weekly in small batches are its audience. Households processing a deer at a time should choose a self-contained electric with a stated rate, like the #8 models in this roundup.

What is a manual grinder best used for?

The Weston #10 suits small batches in places an electric cannot go: a hunting camp, a cabin, a power outage, or a kitchen that grinds a pound or two at a time for a specific recipe. Its clamp mounting is steady, its two plates cover medium and coarse textures, and its stuffing funnel handles small runs of sausage.

It also suits cooks who grind rarely enough that storing and cleaning an electric feels like overhead. The limits are plain: pace is set by the arm, fine textures take a second cranked pass, and a ten pound batch is a project rather than a task. Within those limits it is a complete tool, which is why the style has stayed in production for home kitchens for so long.

How do the two LEM models differ?

The Big Bite #8 and #5 share their design language, metal gears with roller bearings, a built-in circuit breaker, a storage drawer, a covered switch, noise dampening, three plates and three stuffing tubes, and the same five year warranty with lifetime support. The differences are size and pace, stated plainly by the maker.

The #8 runs a 0.5 HP motor at about 7 pounds per minute and weighs 28.66 pounds; the #5 runs 0.35 HP at about 4 pounds per minute and weighs 26.46 pounds, in a body about an inch shorter in each dimension. The #5’s tubes top out at a narrower 1 1/8 inch against the #8’s 1 3/8 inch. Choose by batch: the #5 for a deer or two and store cuts, the #8 for the heavier seasonal pattern.

Conclusion

For most homes the LEM Big Bite #8 is the complete package, with the #5 as its smaller match. The Weston #8 states the strongest motor, the KitchenAid attachment serves mixer owners, and the Weston #10 manual covers every kitchen without a spare outlet. Each one states the figures a household needs to choose with confidence.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.