Key takeaways
- Compare the best water coolers for an Intel 980X, with 240 mm and 360 mm AIO liquid coolers that list LGA 1366 socket support, fan, pump, and radiator specs.
The Intel Core i7-980X runs hot under load, and its LGA 1366 socket narrows the choice of liquid coolers that ship with the right mounting hardware. This guide compares best water coolers for an Intel 980X from AIO lines that list LGA 1366 support, weighing radiator size, fan airflow, and pump speed so you can pick a cooler that mounts cleanly.
Quick verdict
For most 980X builds, the Thermaltake TH240 V3 ARGB Sync is the most direct pick, because it lists LGA 1366 support, uses a 240 mm radiator that fits most mid tower cases, and pairs fans rated at 85.29 CFM each with a pump that runs from 800 to 2,500 RPM. Builders with room for a larger radiator should look at the TH360 V3 ARGB Sync instead.
The short answer is that socket support comes first, and radiator size comes second. Every cooler here lists LGA 1366, so the choice turns on case fit, fan behavior, and radiator area. A 240 mm radiator fits far more cases than a 360 mm radiator, and it still gives you a full AIO pump, a copper cold plate, and two 120 mm fans.
If your 980X runs long renders or long gaming sessions, a 360 mm model gives more radiator area and three fans to move air through it. If your case is small, a 240 mm model is easier to place and route.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Thermaltake TH240 V3 ARGB Sync | 240 mm AIO with ARGB | Most 980X builds | Fans at 85.29 CFM each, pump 800 to 2,500 RPM | Needs a 5V ARGB header for lighting |
| Thermaltake TH360 V3 ARGB Sync | 360 mm AIO with ARGB | Large cases, heavy loads | 365W TDP, three fans at 85.29 CFM each | 397 mm radiator needs 360 mm case support |
| Thermaltake Water 3.0 240 ARGB Sync | 240 mm AIO with ARGB | Older builds, ARGB sync | Copper block, pump at 3,600 RPM | Fans top out at 1,500 RPM |
| Cooler Master MasterLiquid ML240L V2 RGB | 240 mm AIO with RGB | Simple 240 mm builds | 200W TDP, fans at 62 CFM | RGB is not addressable, one color at a time |
| EVGA CLC 280 | 280 mm AIO with RGB | 140 mm fan builds | Two 140 mm fans, 113.50 CFM max | Older model, check all LGA 1366 hardware is in the box |
| DeepCool Gammaxx L240 V2 | 240 mm AIO with RGB | Quiet 240 mm builds | Pump listed at 17.8 dB(A), fans at 69.34 CFM | RGB runs on 12V, not 5V ARGB |
How we selected
Selection rested on published specifications and product pages from makers, reviews, and listing pages, with each model matched to the keyword by socket support first. Only AIO liquid CPU coolers that list Intel LGA 1366 in their socket list were included, and each spec used below was copied from a page opened for this guide.
The guide favors models that cover the main choices a buyer faces: a 240 mm radiator or a larger 280 mm or 360 mm radiator, ARGB fans or plain RGB fans, and motherboard or wired controller lighting. That is why the list includes two current Thermaltake TH V3 models, an older Thermaltake Water 3.0 model, a Cooler Master 240 mm model, a DeepCool 240 mm model, and one 280 mm EVGA model. Socket support was the core filter: every model lists Intel LGA 1366, the socket of the Core i7-980X.
No hands on use is claimed in this guide. The descriptions below quote what the maker or the listing states, and they note where the maker does not state a fact.
Best water coolers for an Intel 980X
Each cooler below is listed with its exact maker name, the build it suits, the specs the maker lists for it, and the limits to weigh before you buy. Read the radiator size, the fans, and the pump together, because those three items decide how the cooler will fit and feel in daily use.
Thermaltake TH240 V3 ARGB Sync AIO liquid cooler
The TH240 V3 ARGB Sync is the lead pick in this guide for 980X owners who want a current AIO that still lists LGA 1366. It suits a mid tower case with 240 mm radiator support, where its single frame fan module keeps cables tidy and its square pump head stays visible through a side panel.
The maker lists a 240 mm AIO with a square pump head, infinity mirror effects, and a detachable top cover for logo orientation. The single frame fan module combines two 120 mm fans, each providing 85.29 CFM of airflow with 3.86 mm-H2O static pressure at 37.8 dB-A. The radiator is a 27 mm slim aluminum unit with a 20 mm copper chamber, and the rubber tubing measures 460 mm.
The pump runs from 800 to 2,500 RPM and the fans from 500 to 2,500 RPM, both on PWM control. Lighting runs through a 5V motherboard sync header, with support listed for ASUS, GIGABYTE, MSI, and ASRock software, covering 16.8 million colors. Socket support covers Intel LGA 2066, 2011-3, 2011, 1851, 1700, 1366, 1200, 1156, 1155, 1151, and 1150, plus AMD AM5 and AM4. The part number is CL-W465-PL12SW-A.
- Pros: Current model that still lists LGA 1366, with a 240 mm radiator that fits most mid tower cases.
- Pros: Fans listed at 85.29 CFM each with 3.86 mm-H2O static pressure, the strongest fan ratings in this guide.
- Pros: Single frame fan module keeps cables tidy.
- Cons: The maker page does not state a TDP rating for this model.
- Cons: Lighting needs a 5V addressable RGB header on the motherboard.
- Buy if: You want a current 240 mm AIO that lists LGA 1366 and fits a mid tower case.
- Skip if: Your board has no 5V ARGB header, or you want a 360 mm radiator.
Thermaltake TH360 V3 ARGB Sync AIO liquid cooler
The TH360 V3 ARGB Sync is the large radiator pick in this guide, with the same pump head and fan module as the TH240 V3, but on a 360 mm radiator. It suits a large case with 360 mm support, where three fans and more radiator area can carry long heavy loads on a 980X.
The listing page shows a 360 mm AIO with a TDP rating of 365W and a radiator that measures 397 x 120 x 27 mm. The fan module measures 360 x 120 x 25 mm and the listed weight is 2,302 g. The water block is copper and the radiator is aluminum.
Fan speed runs from 500 to 2,500 RPM, with airflow at 85.29 CFM, static pressure at 3.86 mmH2O, and noise at 37.8 dB, and the pump runs from 800 to 2,500 RPM. A 2 year warranty is listed. The part number is CL-W466-PL12SW-A.
- Pros: Highest TDP rating in this guide at 365W, with three fans on a 360 mm radiator.
- Pros: Same strong fan ratings as the TH240 V3, at 85.29 CFM per fan.
- Pros: Copper water block and a 2 year warranty listed.
- Cons: The 397 mm radiator needs a case that lists 360 mm support.
- Cons: Three fans at up to 2,500 RPM can be loud, with noise listed at 37.8 dB.
- Buy if: Your case takes a 360 mm radiator and your 980X runs long heavy loads.
- Skip if: Your case lists only 240 mm support, or you want the smallest cooler that fits.
Thermaltake Water 3.0 240 ARGB Sync Edition
The Water 3.0 240 ARGB Sync is the older Thermaltake pick in this guide, and it earns its place because its socket list still includes LGA 1366 alongside newer sockets. It suits builders who want ARGB lighting synced through the motherboard on a proven 240 mm design.
The review page lists part number CL-W233-PL12SW-A and a weight of 1,230 g. The pump runs at 3,600 RPM, the fastest in this guide, and the radiator measures 270 x 120 x 27 mm. The two fans measure 120 x 120 x 25 mm each, run from 500 to 1,500 RPM on PWM, and are listed at 56.45 CFM, 1.59 mm-H2O, and 25.8 dB-A. The rubber tubing measures 326 mm.
Lighting is controlled by an ARGB controller or a 5V addressable RGB header, with sync listed for ASRock, Asus, Biostar, Gigabyte, and MSI software. Socket support covers Intel LGA 2066, 2011-3, 2011, 1366, 1156, 1155, 1151, and 1150, plus AMD TR4, AM4, FM2, FM1, AM3+, AM3, AM2+, and AM2, the widest AMD list in this guide.
- Pros: Widest AMD socket list in this guide, including TR4, alongside LGA 1366.
- Pros: Pump listed at 3,600 RPM, the fastest pump speed in this guide.
- Pros: ARGB controller included for boards without a 5V header.
- Cons: Fans top out at 1,500 RPM with 56.45 CFM, the lowest airflow in this guide.
- Cons: The 326 mm tubing is the shortest in this guide, which limits radiator placement.
- Buy if: You want motherboard synced ARGB and the widest socket list here.
- Skip if: You want the strongest fans, or your case needs long tubing to reach the radiator mount.
Cooler Master MasterLiquid ML240L V2 RGB
The MasterLiquid ML240L V2 RGB is the simple 240 mm pick in this guide, with two SickleFlow 120 RGB fans, a third generation dual chamber pump, and a wired RGB controller. It suits builders who want a straightforward AIO with RGB lighting that does not need motherboard software.
The review page lists product number MLW-D24M-A18PC-R2 and a TDP rating of 200W. The aluminum radiator measures 277 x 119.6 x 27.2 mm, and the pump measures 79.9 x 76 x 47.1 mm, with a listed MTTF of 70,000 hours and noise below 15 dBA. Socket support covers Intel LGA 2066, 2011-v3, 2011, 1151, 1150, 1155, 1156, and 1366, plus AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, and FM1.
The two SickleFlow 120 RGB fans measure 120 x 120 x 25 mm each, run from 650 to 1,800 RPM, and are listed at 62 CFM, 2.5 mmH2O, 8 to 27 dBA, and a life expectancy of 160,000 hours, on a 4 pin PWM connector. The maker describes a third generation dual chamber pump and reinforced sealing, and the review notes a wired RGB controller is included, with lighting that shows one color at a time because the RGB is not addressable. A 2 year warranty is listed.
- Pros: Pump listed below 15 dBA, the quietest pump rating in this guide.
- Pros: Fans listed at 160,000 hours of life expectancy, the longest in this guide.
- Pros: Wired RGB controller included, so no motherboard software is needed.
- Cons: RGB is not addressable, so only one color shows at a time.
- Cons: The RGB controller runs on a 4 pin Molex power connector rather than SATA power.
- Buy if: You want a quiet pump, a simple 240 mm AIO, and RGB without motherboard software.
- Skip if: You want addressable RGB, or you want the strongest fan airflow in this guide.
EVGA CLC 280 liquid CPU cooler
The EVGA CLC 280 is the only 280 mm cooler in this guide, with two 140 mm fans on a 312 mm radiator. It suits cases that list 280 mm support but not 360 mm, where larger fans can move more air at lower speeds than 120 mm fans, and its copper block and sleeved tubing suit a tidy build.
The listing gives model number 400-HY-CL28-V1 and block compatibility with Intel LGA 2066, 2011-v3, 2011, 1700, 1366, 1156, 1155, 1151, and 1150, plus AMD sTR4, AM4, AM3, AM2, FM2, and FM1. The copper block measures 40.20 mm tall, pump noise is listed at 20 dB(A), and the aluminum radiator measures 312 x 139 x 27 mm. The cooler is a self contained unit that needs no filling.
The two fans measure 140 x 140 x 25 mm each, use Teflon Nano Bearings, run from 600 to 2,200 RPM on a 4 pin PWM connector, and are listed at 113.50 CFM at maximum, with noise from 16.0 dB(A) to 39.5 dB(A). RGB lighting can be synced with other EVGA RGB components, and the fans can be swapped. Check that the listing includes all LGA 1366 hardware, because the listing seen was an open box unit.
- Pros: Only 280 mm radiator in this guide, with two 140 mm fans for high airflow.
- Pros: Airflow listed at 113.50 CFM at maximum, the highest in this guide.
- Pros: Copper block, sleeved tubing, and fans that can be swapped.
- Cons: The listing seen was an open box unit, so included hardware should be checked.
- Cons: Noise is listed up to 39.5 dB(A) at full speed, the highest in this guide.
- Buy if: Your case lists 280 mm support and you want the most airflow in this guide.
- Skip if: You want a new retail unit with full hardware in the box, or the quietest fans at full speed.
DeepCool Gammaxx L240 V2 RGB liquid CPU cooler
The Gammaxx L240 V2 is the quiet 240 mm pick in this guide, with a pump listed at 17.8 dB(A) and fans that top out at 1,800 RPM. It suits builders who want a calm AIO with RGB lighting and anti leak tech, without a large radiator, and its copper block and hydro bearing fans suit long daily use.
The listing page lists model number DP-H12RF-GL240V2 and an application rating of 165W for Intel and 250W for AMD. Socket support covers Intel LGA 2066, 2011-v3, 2011, 1366, 1156, 1155, 1151, and 1150, plus AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, and FM1. Net weight is 1,293 g, the aluminum radiator measures 282 x 120 x 27 mm, and the tube length is 310 mm. A 2 year warranty is listed.
The pump measures 91 x 79 x 47 mm, runs at 2,400 RPM with a 10 percent tolerance, and is listed at 17.8 dB(A). The two fans measure 120 x 120 x 25 mm each, run from 500 to 1,800 RPM with a 10 percent tolerance, and are listed at 69.34 CFM, 2.42 mmAq, and noise below 30 dB(A), on a 4 pin connector with hydro bearings. The maker describes anti leak tech, an E-shaped micro water channel, a pure copper CPU block, and 12V RGB lighting.
- Pros: Pump listed at 17.8 dB(A) and fans below 30 dB(A), a quiet pair of ratings.
- Pros: Fans listed at 69.34 CFM, the second highest airflow among the 240 mm models here.
- Pros: Anti leak tech and a pure copper CPU block are listed.
- Cons: RGB runs on a 12V header, not a 5V addressable header, so lighting control is simpler.
- Cons: The 310 mm tubing is short, which limits radiator placement in large cases.
- Buy if: You want a quiet 240 mm AIO with RGB and a low pump noise rating.
- Skip if: You want 5V addressable RGB, or your case needs long tubing.
Buying guide
Use this guide to match a water cooler to your case, your 980X, and your habits. The right choice is rarely the largest radiator or the strongest fans on their own. It is the model whose radiator fits, whose fans suit your noise tolerance, and whose mounting hardware covers LGA 1366.
Radiator size and case fit in the best water coolers for a intel 980x
Radiator size is the first filter, because a cooler that does not fit cannot be fixed by a better pump or stronger fans. Check the case manual for radiator support at the top, front, and side mounts, and note the maximum radiator length, the fan thickness, and any limits from memory height or the graphics card.
The 360 mm model uses a radiator that measures 397 x 120 x 27 mm, plus 25 mm of fan thickness. The 280 mm model uses a radiator that measures 312 x 139 x 27 mm, with 25 mm thick fans. The 240 mm models use radiators from 270 x 120 x 27 mm to 282 x 120 x 27 mm. Tubing length also matters: the TH V3 models list 460 mm, the Water 3.0 lists 326 mm, and the DeepCool lists 310 mm.
LGA 1366 mounting for an Intel 980X in the best water coolers for a intel 980x
LGA 1366 uses a different mounting pattern from later Intel sockets, so the bracket in the box matters more than the radiator size. Every cooler in this guide lists LGA 1366 in its socket list, but the hardware that makes that list real is the set of standoffs, brackets, and backplate parts for that socket.
Check the socket list on the product page before you buy, and look for the exact string LGA 1366, not just a claim of broad Intel support. The Thermaltake models list LGA 1366 alongside LGA 2066, 2011-3, 2011, 1851, 1700, and 1200. Open the box and lay out the mounting parts before you remove the old cooler. For an open box unit such as the EVGA listing seen here, this check matters even more.
Pump speed and fan specs
Pump speed and fan specs decide how the cooler behaves at idle and under load, and the numbers are only useful when read together. A fast pump moves coolant quickly, but it cannot make up for fans that cannot push air through a dense radiator, and strong fans cannot help if the pump runs too slowly.
Pump speeds run from 800 to 2,500 RPM on the TH V3 models, at a fixed 2,400 RPM on the DeepCool, and at 3,600 RPM on the Water 3.0, while the Cooler Master pump is listed by noise below 15 dBA rather than by speed. Fan speeds run from 500 to 2,500 RPM at 85.29 CFM on the TH V3 models, from 600 to 2,200 RPM at 113.50 CFM on the EVGA, from 500 to 1,800 RPM at 69.34 CFM on the DeepCool, and from 500 to 1,500 RPM at 56.45 CFM on the Water 3.0.
Noise, airflow, and daily use
Noise ratings in this guide come from maker and listing pages, and they should be read as a guide to fan behavior, not as a promise of silence in a real room. A cooler that is quiet at idle can still be loud at full speed, and the difference between the two states is often larger than the difference between two models.
The quietest fan noise ratings here are 25.8 dB-A on the Water 3.0 and below 30 dB(A) on the DeepCool, while the TH V3 fans are listed at 37.8 dB-A and the EVGA fans at up to 39.5 dB(A). Pump noise is listed below 15 dBA on the Cooler Master, at 17.8 dB(A) on the DeepCool, and at 20 dB(A) on the EVGA. Set fan curves in BIOS or motherboard software so the fans stay slow at idle and rise only under load.
Tubing, coolant care, and radiator upkeep
AIO coolers are sealed units, so care means keeping the radiator clean, the tubing free of sharp bends, and the pump fed with coolant. Most upkeep is simple dust control and cable checks, done every few months, rather than any work on the liquid loop itself.
Tubing length sets where the radiator can sit: the TH V3 models list 460 mm of rubber tubing, the Water 3.0 lists 326 mm, and the DeepCool lists 310 mm. Route the tubes with gentle curves and no kinks, and keep them clear of fan blades. Clean the radiator fins with short bursts of compressed air, holding the fans still.
FAQ
These questions cover the points that come up most often when buyers compare water coolers for a 980X. Each answer uses specs from the pages opened for this guide, and notes where the maker does not state a fact, so you can judge the trade offs without guessing.
Do all of these water coolers fit an Intel 980X
Yes, all six models in this guide list Intel LGA 1366 in their socket list, which is the socket of the Core i7-980X. That shared listing is the reason they were picked, and it means the mounting hardware for LGA 1366 should be in the box for each model.
Is a 240 mm radiator enough for this CPU
A 240 mm radiator is the most common fit for a 980X build, and four of the six models in this guide use one. It fits far more cases than a 360 mm radiator, and it still gives you a full AIO pump, a copper cold plate, and two 120 mm fans for steady cooling.
What should I check before mounting an AIO on LGA 1366
Check three things before mounting: the socket list names LGA 1366, the case lists support for the radiator size, and the box holds the right brackets, standoffs, and backplate parts. A missing part is far easier to sort out before the old cooler comes off than after.
Can I reuse an old AIO on this build
An older AIO can work on a 980X if it still lists LGA 1366, if the pump still runs quietly, and if all of its mounting hardware is present. Age alone does not rule a cooler out, but a pump that has run for years may be louder or weaker than a new one.
How loud are these AIO coolers at full fan speed
Full speed noise in this guide ranges from 25.8 dB-A on the Water 3.0 to 39.5 dB(A) on the EVGA, with the Thermaltake TH V3 models at 37.8 dB-A and the DeepCool below 30 dB(A). These are maker listed numbers, so they describe the fans on their own rather than a full PC in a room.
Conclusion
Pick the Thermaltake TH240 V3 ARGB Sync for most 980X builds, the TH360 V3 ARGB Sync for large cases and long heavy loads, and the DeepCool Gammaxx L240 V2 for a quiet 240 mm setup. Check LGA 1366 support and radiator fit first, then match the fans and pump to your noise tolerance, and your 980X will have the cooling it needs.
Write Your Review
No reviews yet. Be the first to share your experience!