Key takeaways
- Find the best mid tower for 240mm water coolers with clear radiator support, GPU and CPU clearance, fan layouts, and fit notes for six mid tower cases here.
A 240mm water cooler needs a case with a real 240mm mount, room for the radiator and fans, and clearance for the parts around it. This guide compares six mid tower cases where the maker lists 240mm support. The best mid tower for 240mm water coolers is the case that fits your cooler, your graphics card, and your build plan.
Quick verdict
If you want the widest choice of mounts, the Corsair FRAME 4000D stands out because the maker lists 240mm support at the front, top, and side. If you want a compact case with a clear top mount, the NZXT H5 Flow and the Fractal Design Meshify 2 Compact are strong options, while the Lian Li LANCOOL 207 suits a top mount only.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Corsair FRAME 4000D | Mid tower | Front, top, or side mount | 240mm at front, top, and side | No fans included |
| NZXT H5 Flow | Mid tower | Compact top mount | 240mm at top, 360mm at front | Top 280mm needs low profile memory |
| Lian Li LANCOOL 216 | Mid tower | Front, top, or bottom mount | 240mm at front, top, and bottom | Lower board position cuts GPU length |
| Cooler Master MasterBox TD500 Mesh V2 | Mid tower | Front or top mount with light | 240mm at front and top | CPU cooler height limit is 165mm |
| Fractal Design Meshify 2 Compact Black TG Light Tint | Mid tower | Compact mesh front build | 240mm at top, 360mm at front | Top radiator width limit is 145mm |
| Lian Li LANCOOL 207 | Mid tower | Top mount in a small case | 240mm at top only | No front radiator support listed |
How we selected
Selection started with published specifications from maker pages and listing pages that were opened and read. A case was kept only when the maker listed 240mm radiator support in a named position, such as the front or the top. Cases with no clear 240mm mount were left out of the list.
Best mid tower cases for 240mm water coolers
The six cases in this section all list 240mm radiator support, but they do not list it in the same place. Some list 240mm at the front, top, and side, while others list it only at the top. Read the mount position first, then check the graphics card length, CPU cooler height, and power supply length for your own parts.
Corsair FRAME 4000D
The Corsair FRAME 4000D is a mid tower case with 240mm radiator support at the front, top, and side, which gives a builder three named positions for a 240mm water cooler. That range of mounts makes it a useful starting point when you have not yet decided between a front mount and a top mount for your build.
This case suits a builder who wants mount choice and room for a long graphics card. The maker lists a maximum graphics card length of 430mm, a maximum CPU cooler height of 170mm, and a maximum power supply length of 220mm. Motherboard support covers Mini-ITX, MicroATX, ATX, and E-ATX at 305mm by 277mm, and the maker lists support for reverse connector motherboards.
The maker lists radiator support at the top as 360mm, 280mm, and 240mm, at the front as 360mm, 280mm, and 240mm, and at the side as 360mm, 280mm, and 240mm. The rear supports 140mm and 120mm radiators, and the bottom supports no radiator. Fan support at the top is 3x 120mm and 2x 140mm, at the front is 3x 120mm, 2x 140mm, and 2x 200mm, at the side is 3x 120mm and 2x 140mm, and at the rear is 1x 120mm and 1x 140mm.
Pros:
- 240mm support at the front, top, and side gives three mount choices.
- Graphics card length up to 430mm suits long graphics cards.
- Reverse connector motherboard support suits newer board layouts.
Cons:
- No fans are included, so fans must be bought as part of the build.
- The large case size needs more desk or floor space than a compact case.
Buy if you want three named 240mm mounts and room for a long graphics card. Skip if you want fans included with the case or you want the smallest mid tower that still fits a 240mm water cooler.
NZXT H5 Flow
The NZXT H5 Flow is a compact mid tower case with a 240mm radiator mount at the top and a 360mm radiator mount at the front. That pairing suits a builder who wants a 240mm water cooler at the top as exhaust, with the front left free for intake fans and a clear view of the graphics card.
This case suits a builder who wants a compact ATX case with mesh panels and a perforated power supply shroud. The maker lists motherboard support for E-ATX up to 277mm wide, ATX, Micro-ATX, and Mini-ITX. Clearances are listed as CPU cooler height up to 170mm, graphics card length up to 410mm, and power supply length up to 200mm. Cable management space is listed as up to 28.7mm, and dimensions are listed as 465mm by 225mm by 430mm, with a weight of 7.28kg.
The maker lists front radiator support up to 360mm and top radiator support up to 240mm, with 280mm at the top only with low profile memory. The rear supports a 120mm radiator. Top mounted radiator and fan combined thickness is listed as up to 55mm for a 140mm and 280mm radiator and fan set, so a thick stack needs a check against the memory and the top of the motherboard.
Two 120mm Quiet Airflow fans are included, with one at the front and one at the rear. Fan support is listed as 3x 120mm or 2x 140mm at the front, 2x 120mm or 2x 140mm at the top, 2x 120mm at the bottom, and 1x 120mm at the rear. The front connections are 1x USB 3.2 Type-A, 1x USB 3.2 Gen 2×2 Type-C, and 1x headset audio jack. The main limit is the top mount condition for a larger radiator, and bottom fans are not included.
Pros:
- Top 240mm mount suits a 240mm water cooler as top exhaust.
- Graphics card length up to 410mm suits long graphics cards.
- Two 120mm fans are included, one front and one rear.
Cons:
- Top 280mm support needs low profile memory, which limits memory choice.
- Bottom fans are not included, so bottom intake needs extra fans.
Buy if you want a compact mid tower with a clear 240mm top mount and a 360mm front option. Skip if you plan to use tall memory with a larger top radiator, or you want a front 240mm mount as your first choice.
Lian Li LANCOOL 216
The Lian Li LANCOOL 216 is a mid tower case with 240mm radiator support at the front, top, and bottom. That spread of mounts suits a builder who wants to compare a front mount, a top mount, and a bottom mount for a 240mm water cooler, and who wants large front fans included with the case.
This case suits a builder who wants strong out of box airflow and a flexible interior. The maker lists support for E-ATX boards up to 280mm wide, ATX, Micro-ATX, and Mini-ITX motherboards. Graphics card length is listed as up to 392mm, CPU cooler height is listed as up to 180.5mm, and power supply length is listed as up to 220mm. Those clearances suit a large graphics card and a tall air cooler, as well as a 240mm water cooler.
Radiator support is listed as 1x 240, 280, and 360mm at the front, 1x 240, 280, and 360mm at the top, and 1x 240mm at the bottom. The maker describes a lower motherboard position for water cooling, where the motherboard leaves a 63mm thick gap at the top to install radiator and fan sets. That lower position is useful for a top radiator, but the maker notes that the maximum graphics card size is lowered in that position.
Two 160mm fans are included at the front and one 140mm fan is included at the rear. The front panel uses dual mesh panels, and the top also uses mesh. Drive bays are listed as 6x 2.5 inch internal and 2x 3.5 inch internal, with 7 standard expansion slots. Dimensions are listed as 235mm by 491.7mm by 480.9mm. The main limit is that the board position changes the clearance, so a top radiator plan and a long graphics card plan need to be checked together.
Pros:
- 240mm support at the front, top, and bottom gives three mount choices.
- Two 160mm front fans and one 140mm rear fan are included.
- CPU cooler height up to 180.5mm suits tall air coolers.
Cons:
- Lower board position for water cooling cuts the graphics card size.
- The case is tall and deep, so it needs more space than a compact case.
Buy if you want three 240mm mounts, large included fans, and a flexible board position. Skip if you want a fixed layout with no board position choice, or you want the smallest case in this guide.
Cooler Master MasterBox TD500 Mesh V2
The Cooler Master MasterBox TD500 Mesh V2 is a mid tower case with 240mm radiator support at the front and the top. That pairing suits a builder who wants a mesh front panel, three included front fans with light, and a choice between a front mount and a top mount for a 240mm water cooler.
This case suits a builder who wants a mesh front and a clear view of the build through a tempered glass side panel. The maker lists motherboard support for Mini-ITX, Micro-ATX, ATX, SSI CEB, and E-ATX up to 12 inch by 10.7 inch. Clearances are listed as CPU cooler height 165mm, power supply length 200mm with a recommended length up to 170mm, and graphics card length 410mm.
Radiator support at the top is listed as 120mm, 140mm, 240mm, 280mm, and 360mm, with a recommended maximum thickness of 55mm. Radiator support at the front is listed as 120mm, 140mm, 240mm, 280mm, and 360mm. The rear supports a 120mm radiator. Fan support at the top is 3x 120mm and 2x 140mm, at the front is 3x 120mm and 2x 140mm, and at the rear is 1x 120mm, for up to seven 120mm fans in total.
Pros:
- 240mm support at the front and top gives two mount choices.
- Three 120mm ARGB front fans and a controller are included.
- Graphics card length up to 410mm suits long graphics cards.
Cons:
- CPU cooler height limit of 165mm is lower than in the other cases.
- Recommended power supply length is up to 170mm, below the maximum.
Buy if you want a mesh front, included ARGB fans, and a front or top 240mm mount. Skip if you plan to use a tall air cooler later, or you want a compact case.
Fractal Design Meshify 2 Compact Black TG Light Tint
The Fractal Design Meshify 2 Compact Black TG Light Tint is a compact mid tower case with a 240mm radiator mount at the top and a 360mm radiator mount at the front. That pairing suits a builder who wants a mesh front, a short case depth, and a 240mm water cooler at the top of the case.
This case suits a builder who wants a compact case with a tempered glass side panel and a mesh front panel. The maker lists motherboard support for ATX, Micro-ATX, and Mini-ITX. Case dimensions are listed as 424mm by 210mm by 475mm, and 412mm by 210mm by 455mm without feet, protrusions, and screws, with a volume of 39.4 liters and a net weight of 7.7kg.
Radiator support is listed as up to 360 and 280mm at the front, up to 240mm at the top, 120mm at the rear, and 120mm at the bottom with removal of the hard drive cage. The maker also lists a maximum radiator width of 145mm and a maximum motherboard component height of 40mm for a top mounted radiator, so a wide radiator or tall board parts near the top need a check before a top mount is chosen.
Clearances are listed as graphics card length up to 341mm with a front fan, and up to 360mm without a front fan, CPU cooler height up to 169mm, and power supply length up to 200mm, or up to 165mm with the hard drive cage and a front fan. Two 140mm Dynamic X2 GP-14 fans are included at the front and one 120mm Dynamic X2 GP-12 fan is included at the rear. Fan mounts are listed as 7x 120mm or 4x 140mm and 2x 120mm in total. The front connections are 1x USB 3.1 Gen 2 Type-C, 2x USB 3.0, audio in and out, a power button, and a reset button. Dust filters are listed at the top, front, and bottom.
Pros:
- Top 240mm mount suits a 240mm water cooler as top exhaust.
- Compact size, at 39.4 liters, suits a smaller desk space.
- Two 140mm front fans and one 120mm rear fan are included.
Cons:
- Top radiator width is limited to 145mm by the maker.
- Graphics card length falls to 341mm with a front fan fitted.
Buy if you want a compact mesh case with a clear 240mm top mount. Skip if your radiator is wider than 145mm, or your graphics card needs more than 341mm with a front fan fitted.
Lian Li LANCOOL 207
The Lian Li LANCOOL 207 is a mid tower case with 240mm radiator support at the top only. That single mount suits a builder who has already decided on a top mount for a 240mm water cooler and wants a compact case with four fans included in the box and a clear top mount.
This case suits a builder who wants a small mid tower with ATX support and a top radiator as the main liquid cooling mount. The maker lists motherboard support for standard ATX with a width up to 244mm, Micro-ATX, and Mini-ITX, so a standard ATX board fits, but a wide E-ATX board is not listed. The case is listed as a mid tower with a steel body and a 4.0mm tempered glass side panel.
Radiator support is listed as top only, at 360, 280, and 240mm. No front radiator support is listed, so a builder who wants a front 240mm mount should choose a different case in this guide. The maker describes a redesigned motherboard tray position to improve top radiator clearance and to place bottom fans directly under the graphics card for cooling.
Clearances are listed as graphics card length up to 375mm, CPU cooler height up to 180mm, and power supply support for ATX under 160mm. Dimensions are listed as 455.6mm by 219mm by 456mm, depth by width by height. Four fans are included: 2x 140mm ARGB fans at the front and 2x 120mm PWM fans above the power supply shroud. Fan support is listed as 140mm by 2 at the front, 120mm by 3 or 140mm by 2 at the top, 120mm by 2 above the power supply shroud, and 120mm by 1 at the rear. A graphics card anti-sag bracket with vertical and horizontal adjustment is listed.
Pros:
- Top 240mm mount is clear and listed with 280mm and 360mm options.
- Four fans are included, with two at the front and two above the shroud.
- CPU cooler height up to 180mm suits tall air coolers.
Cons:
- No front radiator support is listed, so front mounting is not an option.
- Power supply support is limited to ATX under 160mm.
Buy if you want a compact top mount case with four fans included. Skip if you want a front 240mm mount, a long power supply, or an E-ATX motherboard.
Buying guide for a mid tower for 240mm water coolers
A 240mm water cooler is a common size, but a case that lists a 240mm mount in one position may not list it in another. Start with the mount position, then check the radiator and fan thickness, the memory height, the graphics card length, and the power supply length. Those five checks cover most fit problems before parts are bought.
Top mount or front mount for a 240mm radiator in the best mid tower for 240mm water coolers
A top mount places the 240mm radiator above the motherboard as exhaust, which suits a build where the front is used for intake fans. A front mount places the radiator at the front as intake, which suits a build where the top is used for exhaust fans. Both positions work, but the case must list the size in the position you plan to use.
Radiator thickness, fan clearance, and memory height
Radiator size is only one part of the fit. Radiator thickness plus fan thickness sets the total stack height, and that stack must fit in the mount without touching the memory, the motherboard heatsinks, or the top of the case. A thin radiator with standard fans is easier to fit than a thick radiator with the same fan size.
GPU length, CPU cooler height, and PSU length
Graphics card length, CPU cooler height, and power supply length are the three clearances that most often decide whether a case fits a build. A case can list 240mm radiator support and still fail on one of these three, so check all three against the parts you own or plan to buy.
Graphics card length in this guide ranges from 341mm with a front fan in the Fractal Design Meshify 2 Compact to 430mm in the Corsair FRAME 4000D. The NZXT H5 Flow and the Cooler Master MasterBox TD500 Mesh V2 list up to 410mm, the Lian Li LANCOOL 216 lists up to 392mm, and the Lian Li LANCOOL 207 lists up to 375mm. CPU cooler height ranges from 165mm in the Cooler Master case to 180.5mm in the Lian Li LANCOOL 216, and power supply length is shortest in the Lian Li LANCOOL 207, at ATX under 160mm.
Airflow, filters, and dust control
Airflow in a mid tower case comes from the front panel, the fan layout, and the path from intake to exhaust. A mesh front panel lets air through the front, while a solid front panel limits intake to side gaps or slots. The cases in this guide use mesh at the front or top, with tempered glass side panels.
Cable routing, drive mounts, and front connections
Cable routing space behind the motherboard tray decides how tidy a build can be, and how much cable can sit out of the airflow path. The Corsair FRAME 4000D lists cable routing space of 37mm, the NZXT H5 Flow lists up to 28.7mm, the Fractal Design Meshify 2 Compact lists 17mm to 28mm, and the Cooler Master case lists 19mm.
FAQ about mid tower cases for 240mm water coolers
These questions cover the fit checks that come up most often with a 240mm water cooler in a mid tower case. Each answer uses the radiator support and clearances listed on the pages that were opened for the cases in this guide, and general build practice where no single case spec applies.
Will a 240mm water cooler fit in any mid tower case?
No, a 240mm water cooler does not fit in every mid tower case, because a mid tower case can list a larger radiator at the front and still have no 240mm mount at the top, or list a 240mm mount only at the front. Always check the named mount position, not just the case size or the largest radiator size.
Is a top mount better than a front mount for a 240mm radiator?
Neither position is better for every build, because the best position depends on the graphics card, the memory, and the fan layout. A top mount suits a build with a long graphics card, because the radiator does not take depth from the graphics card space. A front mount suits a build with tall memory.
Do I need to remove fans to fit a 240mm radiator?
You may need to move or remove a fan at the mount position, because a 240mm radiator uses the same fan mounts as two 120mm fans. A top mount often replaces two top fans, and a front mount often replaces two or three front fans. The radiator fans then serve as the fans for that position.
What should I measure before I buy a 240mm water cooler?
Measure the radiator length, width, and thickness, the fan thickness, the memory height, the graphics card length, and the power supply length. Then compare each figure with the case list for the mount you plan to use. A single figure that is over the limit can block a mount that looks right on length alone.
Can I add a second radiator later in these cases?
Yes, several cases in this guide list more than one radiator mount, so a second radiator can be added later if the first mount leaves room for it. A case with 240mm support at the front, top, and side, such as the Corsair FRAME 4000D, gives the most room for a second radiator.
Conclusion
Choose the Corsair FRAME 4000D for the widest mount choice, the NZXT H5 Flow or Fractal Design Meshify 2 Compact for a compact top mount, the Lian Li LANCOOL 216 for three mounts and large fans, the Cooler Master MasterBox TD500 Mesh V2 for a mesh front, or the Lian Li LANCOOL 207 for a small top mount case.
Write Your Review
No reviews yet. Be the first to share your experience!