Updated Nov 16, 2026· 16 min read

Key takeaways

  • Six sound mixers for podcasting compared: RODECaster Duo, PodTrak P4, Maonocaster AME2, AmpliGame SC8, DLZ Creator XS and AG03MK2, with preamps and recording.

Panel show or solo cast, the right sound mixers for podcasting choice depends on how many voices sit at the table and how much help you want from the hardware. These six span two to four microphone inputs, each verified on an opened product page with preamp gain, processing and recording quoted as published.

Quick verdict

Count microphones first. The PodTrak P4 seats four local voices and records without a computer. The RODECaster Duo and DLZ Creator XS seat two voices each and add the deepest processing and assistance. The Maonocaster AME2, AmpliGame SC8 and AG03MK2 are one-microphone desks for solo hosts. The table compares the published shapes.

Mixer Mic inputs Preamp gain Records without a PC Signature help
RODE RODECaster Duo 2 combo + headset + wireless 76 dB Yes, microSD or USB, multitrack APHEX processing, SMART pads
Zoom PodTrak P4 4 XLR 70 dB Yes, SD, up to 10 tracks Mix-minus call-ins, sound pads
Maono Maonocaster AME2 1 combo + 3.5 mm 60 dB No, streams to devices Battery, DENOISE, ducking
FIFINE AmpliGame SC8 1 combo + headset 50 dB No, USB to computer or phone Game/chat balance, voice changer
Mackie DLZ Creator XS 2 combo 80 dB Yes, microSD or USB, multitrack Mix Agent, AutoMix, touch display
Yamaha AG03MK2 1 combo + headset Not stated on the page No, USB to computer Loopback, one-touch DSP

For a two-person show that should sound finished on the day, the Duo and the DLZ Creator XS are the strongest desks here. The three solo desks differ in battery power, game features and audio resolution. For a four-person table on location, the P4 stands alone. For a solo show recorded at a desk, any of the three small mixers works, and the choice becomes about streaming features rather than sound.

How we selected these podcast mixers

Each mixer below is a current model whose product page was opened and read in full, and every specification quoted comes from that page. The set was also checked against the earlier podcast articles in this series so that no earlier article’s product list is repeated beyond a small overlap.

Podcast mixers divide by crew size and by how much of the engineer’s job they automate, so the comparison weighs microphone count, preamp gain, call-in handling, onboard processing and whether the unit records on its own. Where a maker’s own pages disagree, such as a pad count or a phantom power line in two dealer tables, the conflict is flagged in the section instead of resolved by guessing.

Six sound mixers for podcasting, compared in detail

The order runs from the fullest production desks to the smallest solo units. Each section states who the mixer suits, the specifications its maker or dealer page publishes, and the limits that decide whether it fits a panel show, a two-host format or a one-person recording routine.

RODE RODECaster Duo

The RODECaster Duo is the compact half of RODE’s production-console line: the same quad-core engine and processing as the larger Pro II, sized for two-person shows. It suits podcasters who record interviews, take remote guests and want the mix to sound produced before any editing starts.

Two Neutrik combo inputs take microphones, instruments or line sources through Revolution preamps with up to 76 dB of gain and a -131.5 dBV noise figure, enough for low-output dynamic microphones without a booster. A TRRS headset input and a built-in wireless receiver for RODE Series IV transmitters add two more ways to seat a voice. Seven channels are assigned across four physical faders and three virtual faders, with six SMART pads triggering sounds, effects or MIDI actions.

Processing is the deep end of this group: APHEX Aural Exciter, Big Bottom and Compellor emulations join equalizers, high-pass filters, noise gates, de-essers, reverb, delay and pitch effects per channel. It records stereo or multitrack files to a microSD card or USB storage in WAV or MP3, connects two computers or mobile devices over dual USB-C, and brings phone guests in over Bluetooth. Two headphone outputs, a color touchscreen and USB-C PD power at 30 W finish the desk, which measures 235 x 225 x 76 mm and weighs about 1.13 kg.

  • Pros: the strongest preamps and processing here; wireless microphone receiver built in; records multitrack with no computer.
  • Cons: two wired microphone inputs is the ceiling; dealer spec tables conflict on its phantom power and pad count, both flagged in the research notes.
  • Buy if: your show has two hosts or one host plus guests, and you want production polish at record time.
  • Skip if: you seat three or four local microphones.

Zoom PodTrak P4

The PodTrak P4 is a portable podcast recorder built for panels: four microphone inputs, four headphone outputs and card recording in a battery-powered box. It suits multi-person shows that record away from a studio desk, in living rooms, offices or on the road.

Each of the four XLR inputs has selectable +48 V phantom power, up to 70 dB of gain, its own gain knob and a mute button, and limiters and low-cut filters work on the way in. Four 3.5 mm headphone outputs give every guest an independent mix with its own level control, the detail panel guests actually judge a recorder by. Four sound pads fire music, jingles or pre-recorded segments, with 11 preset sounds included and room for your own samples.

Remote guests arrive two ways at once: a smartphone on the TRRS phone input and a computer over USB, both protected by automatic mix-minus so callers never hear themselves echoed back. Recording runs to an SD card as up to ten tracks at 16-bit and 44.1 kHz in WAV format, the four inputs, the four pads and the stereo mix each on their own track for editing. Connected to a computer it becomes a 2-in/2-out USB interface instead. Power comes from two AA batteries for up to four hours, an AC adapter sold separately, or a USB battery.

  • Pros: four real microphone inputs with four headphone mixes; two simultaneous call-ins with mix-minus; fully portable recording.
  • Cons: recording resolution stops at 16-bit/44.1 kHz; no onboard EQ or voice processing beyond limiters and low-cut filters.
  • Buy if: your podcast is a conversation among three or four people in the same room.
  • Skip if: you record alone and would rather have processing than seats.

Maono Maonocaster AME2

The Maonocaster AME2, in its original version, is a battery-powered creator console for one main microphone plus a second mic input, built for podcasters who also livestream to phones. It suits solo hosts and two-person interviews recorded anywhere, including outdoors.

An XLR and 6.35 mm combo input with 48 V phantom power and up to 60 dB of gain drives dynamic microphones such as the SM7B class without a booster, and a 3.5 mm input takes a second microphone. One-button DENOISE reduces background sound, three EQ knobs shape treble, mid and bass, and six reverb modes plus 12-step Auto-Tune cover entertainment formats. Custom sound pads fire stingers and cues, a Side-Chain function ducks backing music under speech automatically, and a Music Only mode strips vocals for karaoke-style segments.

Connections aim at phones as much as computers: USB-C for digital output, AUX for analog input and output, and Bluetooth 4.2 as a backing-track input, with two headphone jacks so a guest can monitor beside you. The built-in 2000 mAh battery runs about eight hours and recharges in about three. The trade-offs are resolution and depth: audio runs at 48 kHz and 16-bit, and there is no multitrack recording, so the AME2 is a live console first and a recorder only through the device it feeds. It measures 24.5 x 15.7 x 5.5 cm.

  • Pros: battery power with phone-first connections; strong gain for dynamic microphones; ducking and noise reduction built for live shows.
  • Cons: 16-bit audio and no multitrack; a newer Gen2 model with a different input layout shares the name, so check the version when ordering.
  • Buy if: you podcast and stream solo or as a pair, often from a phone, and not always near a wall outlet.
  • Skip if: you edit multitrack sessions or record panels.

FIFINE AmpliGame SC8

The AmpliGame SC8 is a gaming-first mixer that earns its place here for one specific podcaster: the solo host who also streams games or records with an audience listening live. FIFINE’s own page leads with podcasters among its users, and its one-microphone design matches a one-person show.

An XLR and 6.35 mm combo input provides 50 dB of gain and 48 V phantom power through the XLR connection, with a Dynamic/Condenser switch, a stated microphone signal-to-noise ratio of 75 dB and distortion under 0.2 percent; the maker notes plainly that hungrier dynamic microphones may still want an inline booster. A headset jack covers headset microphones. USB-C connects a computer or, via OTG, a phone or tablet, an optical input takes console or TV audio, and an AUX input layers music or podcast audio from another device.

Its streaming tools are the draw: separate game and chat audio paths with a Game/Chat balance dial, virtual 7.1 surround with Game, Music and Movie modes, a voice changer with robot, demon and megaphone effects named by the maker, three push-to-mute knobs, and RGB lighting that reacts to your audio levels. The free FIFINE Genie software saves EQ profiles and presets. It does not record on its own and outputs the mixed signal over USB, which the maker itself says makes it a poor fit for dual-PC setups.

  • Pros: game and chat separation with a balance dial; voice effects and sound shaping for live audiences; works with phones over OTG.
  • Cons: one microphone input and 50 dB of gain is the whole ceiling; no standalone or multitrack recording.
  • Buy if: your podcast is a solo show wrapped around gaming or live streaming.
  • Skip if: guests sit at your table or you edit separate tracks.

Mackie DLZ Creator XS

The DLZ Creator XS is Mackie’s compact adaptive mixer, built around a 7-inch touch display and software that sets itself up with you. It suits two-person podcasts and streams where the host would rather confirm settings than learn them, without giving up manual control later.

Two XLR/TRS combo inputs carry Onyx80 preamps with up to 80 dB of gain, the highest figure in this group. Around them sit a stereo channel on dual quarter-inch inputs, a stereo eighth-inch channel and a bidirectional Bluetooth channel, for two microphones plus three external devices in total. Customized headphone mixes feed two independent headphone outputs. Three control modes, Easy, Enhanced and Pro, change how much of the mixer the screen shows you.

The assistance is the point: Mix Agent walks through setup and sound check and sets gain levels, AutoMix manages levels when hosts talk over each other, and mix-minus keeps Bluetooth callers echo-free. Processing runs to 3-band parametric EQ, noise gate, de-esser, compressor, Atomizer Reverb and Chronotronic Delay, plus voice-changing effects, and customizable pads trigger samples or commands such as fade and duck. It records full multitrack audio to a microSD card or USB flash drive with no computer, or works as a 14×4 USB-C audio interface when one is connected.

  • Pros: guided setup and automatic level management; 80 dB preamps; multitrack card recording plus a 14×4 interface.
  • Cons: two microphone inputs maximum; Mackie’s own store showed it on backorder at research time, so check availability.
  • Buy if: you host a two-person show and want the mixer to handle gain and levels while you host.
  • Skip if: you need three or four microphone seats, or you dislike touchscreen control.

Yamaha AG03MK2

The AG03MK2 is Yamaha’s small streaming mixer, a 3-channel desk for one microphone that frames a podcast as a broadcast: voice in, computer audio folded in, finished stereo out. It suits solo podcasters and interviewers who bring guests in over calls rather than chairs.

Channel 1 is a combo mic and line input with +48 V phantom power, a headset microphone connection and a 60 mm fader, with a mute button added on this MK2 generation. Channel 2 takes a guitar or line source with a Hi-Z input, and channel 3 is a stereo line input. A 4-pole TRRS mini jack connects a smartphone for calls and apps. Onboard DSP provides 1-TOUCH COMP/EQ, reverb and an amp simulator, all processed on the internal chip with zero latency, and the AG Controller app opens the detailed settings.

Its streaming-out selector is the feature podcasters use daily: DRY sends channels 1 and 2 untouched for later editing, INPUT MIX sends the live blend, and LOOPBACK folds computer audio back into the output for music, clips and call platforms. USB carries two tracks each way at 24-bit and 192 kHz, the highest resolution in this group, and the unit runs on USB bus power at 5 V and 900 mA. Cubase AI and WaveLab Cast are included for recording and editing. There is no card recording and no second XLR input, and the page does not state a preamp gain figure.

  • Pros: loopback and the three-way streaming selector; 24-bit/192 kHz audio; zero-latency one-touch voice processing.
  • Cons: one microphone channel; no standalone recording; guests join by phone or app, not by microphone.
  • Buy if: you record solo or interview remotely and want one polished stereo feed.
  • Skip if: your format seats guests in the room.

Buying guide

A podcast mixer purchase goes wrong in predictable places: too few microphone inputs, call-ins that echo, or processing that lives in software you never open. The five checks below follow the order a show actually grows, from the first solo season to a panel with remote guests.

What sound mixers for podcasting must handle

Start with the guest list. One voice needs one good preamp, which is why the AG03MK2, SC8 and AME2 exist. Two voices in the room need two preamps and two headphone outputs, the Duo and DLZ Creator XS pattern. Four voices need the PodTrak P4; nothing else here seats four microphones.

Then decide where guests come from. Remote guests need mix-minus, which the P4, Duo and DLZ Creator XS all provide for phone or computer call-ins, and which the AG03MK2 approximates through its TRRS phone connection and loopback. A mixer without mix-minus will feed callers their own voices back, and listeners hear it as echo.

Preamp gain: the number that decides your microphone

Low-output dynamic microphones, the broadcast style most podcasters eventually buy, need gain in the 60 to 80 dB range to record at healthy levels without hiss. The DLZ Creator XS publishes 80 dB, the Duo 76 dB, the P4 70 dB and the AME2 60 dB, all workable figures stated by their makers.

The SC8 publishes 50 dB, and FIFINE itself notes that a hungrier dynamic microphone may need an inline booster on top. The AG03MK2’s opened page states no gain figure at all. Neither fact disqualifies a mixer for condenser microphones, which need far less gain, but both belong in the decision before the microphone purchase, not after.

Recording: card, computer, or both

Three of these mixers record without a computer: the P4 to SD as up to ten tracks, the Duo to microSD or USB storage as stereo or multitrack, and the DLZ Creator XS to microSD or a flash drive as full multitrack. Card recording removes the laptop from the room, along with its notifications, updates and fan.

The other three are interfaces: the AG03MK2 sends two tracks at up to 192 kHz, the AME2 and SC8 send a live mix to a computer or phone. A live mix is fine for shows published as recorded. Multitrack matters when voices overlap, rooms differ or a guest arrives louder than the host, because separate tracks can be repaired and separate stems cannot.

Processing at record time versus in editing

Onboard processing fixes sound while you record: the Duo’s APHEX chain and per-channel EQ, gate and de-esser, the DLZ’s parametric EQ, gate, de-esser and compressor, the AG03MK2’s one-touch comp/EQ and reverb, and the AME2’s DENOISE and EQ knobs. Shows that publish fast benefit most, because the episode leaves the desk nearly finished.

The P4 takes the opposite position, offering limiters and low-cut filters only and leaving tone to editing, which suits producers who want clean, unprocessed tracks. Neither approach is more professional. The error is buying heavy processing and then reprocessing everything in editing anyway, or buying none and discovering your publishing schedule has no room for editing.

Assistance features: who is the engineer

The DLZ Creator XS goes furthest toward replacing the engineer, with a setup assistant, automatic gain and AutoMix for crosstalk. The Duo and AG03MK2 assist through presets and one-touch processing. The P4 and AME2 hand you knobs and pads and trust you with them.

Match the assistance to the crew. A solo host performing and engineering at once gains real focus from automation. A show with a dedicated producer gains nothing and may fight it. Assistance also ages differently from hardware: preamps stay good for a decade, while assistants depend on the maker’s software support.

FAQ

These are the questions podcasters ask when a show outgrows a USB microphone: how many inputs the format really needs, what mix-minus does, whether multitrack is worth it, and how much gain a broadcast dynamic microphone requires. Short answers first, with the reasoning after each one.

Do sound mixers for podcasting record without a computer?

Three of these six do. The PodTrak P4 records up to ten tracks to an SD card, the RODECaster Duo records stereo or multitrack to microSD or USB storage, and the DLZ Creator XS records multitrack to microSD or a USB flash drive, all with no computer in the room.

The AG03MK2, Maonocaster AME2 and AmpliGame SC8 are interfaces that need a computer, phone or tablet to capture anything. The AME2’s battery makes it portable, but the recording still happens on the connected device. If recording away from a desk matters, shop the first three and check which card each one takes.

How many microphone inputs does a podcast need?

One per person in the room, plus nothing. Solo shows need one, which the three small mixers here serve well. Two-host shows need two with two headphone outputs, the Duo and DLZ Creator XS layout. Panels of three or four need the PodTrak P4’s four inputs.

Remote guests do not consume microphone inputs; they arrive on phone, USB or Bluetooth channels, which is why two-input desks host four-person conversations when two guests call in. Count chairs, not participants. Buying four inputs for a show whose guests are all remote buys weight and unused preamps.

What is mix-minus, and does my show need it?

Mix-minus sends a caller everything in the mix except their own voice. Without it, a phone or computer guest hears themselves return a fraction of a second later, which makes normal conversation nearly impossible and prints echo into the recording. It is a routing feature, not an effect.

The PodTrak P4 applies it automatically to both its TRRS and USB call paths, the DLZ Creator XS applies it to Bluetooth callers, and the Duo’s phone and Bluetooth channels are built for the same job. Any show with remote guests needs it from somewhere; if the mixer lacks it, the call software has to provide it instead.

Is multitrack recording worth it for a podcast?

For multi-voice shows, usually yes. Separate tracks let you lower a loud guest, mute a cough, or replace a damaged channel without touching the others. The Duo, P4 and DLZ Creator XS all record multitrack to card, and their stereo mixes remain available for quick publishing.

For a solo show recorded in a treated room, a clean stereo or even single track loses little, and the AG03MK2’s dry mode exists for exactly that workflow. Multitrack also multiplies file sizes and editing time, so it earns its keep only when there is something to separate.

How much preamp gain does a broadcast dynamic microphone need?

Plan on 60 dB or more of published gain for low-output dynamic microphones of the broadcast type. The makers here state 80 dB for the DLZ Creator XS, 76 dB for the RODECaster Duo, 70 dB for the PodTrak P4 and 60 dB for the Maonocaster AME2, all aimed at that microphone class.

Below that range, the microphone records quietly and raising the level later raises the noise floor with it, unless you add an inline booster, which is the path FIFINE itself describes for the SC8’s 50 dB. Condenser microphones need far less gain and work comfortably on any mixer in this group.

Conclusion

Two voices or four, assisted or manual, the pattern is consistent: the Duo and DLZ Creator XS help you most, the PodTrak P4 seats the most guests, the AME2 and SC8 serve solo creators with live audiences, and the AG03MK2 keeps one voice polished. Count your chairs first, then choose. The rest is workflow taste.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.