Key takeaways
- Compare six USB mixers for podcasting with multitrack recording, mix-minus for remote guests, onboard compression and effects, and SD backup recording options.
The usb mixers for podcasting in this guide cover six ways to record a show, from a compact analog mixer with a 4 x 4 USB interface to a 14-channel desk with eight mic preamps. Each one puts the podcast jobs on the panel: clean mic inputs, headphone monitoring for every voice, a feed for remote guests, and a recording path you can trust.
What usb mixers for podcasting have to get right
A podcast mixer earns its place in the recording, not on the spec sheet. The jobs are plain: capture each voice cleanly, let every speaker hear themselves without delay, bring in a remote guest without echo, and hand the editing software files that need as little repair as possible.
Microphone inputs come first. Most shows run between one and four voices, and each voice needs its own preamp with enough gain for a dynamic broadcast mic, phantom power if a condenser joins the table, and a low-cut filter to keep desk thumps and room rumble out of the recording. Processing comes next. A compressor on the mic channel evens out a speaker who leans in and out, and a simple EQ fixes the worst of a boxy room before the file ever reaches editing.
The recording path decides how much work happens later. A stereo USB feed sends one finished mix to the computer, which is fine for a solo show recorded in one take. Multitrack USB sends each microphone on its own track, so a cough, a crosstalk moment or a quiet guest can be fixed in editing without touching the other voices. A built-in SD recorder adds a backup that keeps running even when the computer does not. Remote guests need one more feature: mix-minus, a feed that carries the whole program except the guest’s own voice, so nobody hears themselves echo back.
One more distinction matters before any model names come up. A USB mixer is not the same tool as a small USB interface with a single mic input. The mixer gives every source a fader and a place in one shared monitor mix, so a host can ride levels, mute a coughing guest and play a clip without opening software. That shared control is what a podcast, with its mix of voices, music and callers, actually runs on from the first episode.
The six usb mixers for podcasting in this guide
The six models below divide by how much of the show they handle on their own. Three are analog mixers with USB added, one is a digital mixer run from a phone app, and two are recording workstations that can capture the whole show to an SD card with no computer in the room.
The Allen & Heath ZEDi-10FX and the Behringer Xenyx Q1204USB are the classic analog pair, built around four mic preamps each. The TASCAM Model 12 and the PreSonus StudioLive AR12c scale up to eight mic inputs for panel shows, with multitrack recording over USB and to SD card. The Mackie Onyx8 sits in the middle with four preamps, multitrack USB and an effects engine run from a color display. The Behringer FLOW 8 is the odd one out: a small digital mixer with automatic gain, app control and snapshots that recall a whole show setup in one tap.
| Model | Mic preamps | USB recording | Standout point |
|---|---|---|---|
| Allen & Heath ZEDi-10FX | 4 GSPre | 4 x 4 multitrack, 24-bit/96 kHz | Effects can feed headphones only |
| Behringer Xenyx Q1204USB | 4 XENYX | Stereo mix | One-knob compressor on every mic channel |
| TASCAM Model 12 | 8 Ultra HDDA | 12-in/10-out multitrack, 24-bit/48 kHz | Mix-minus and 12-track SD recording |
| Mackie Onyx8 | 4 Onyx | 8 x 4 multitrack, 24-bit/96 kHz | Studio Command color display |
| Behringer FLOW 8 | 2 Midas, plus 2 mic/line | 10 tracks, 24-bit/48 kHz | EZ-GAIN sets levels on its own |
| PreSonus StudioLive AR12c | 8 XMAX | 14 x 4 multitrack, 24-bit/96 kHz | Eight preamps plus an SD backup recorder |
Allen & Heath ZEDi-10FX: analog feel, multitrack USB
The ZEDi-10FX is a 10-channel analog mixer with a 4 x 4 USB interface inside, so four sources can land on separate tracks in the recording software. Its GSPre preamps come from Allen & Heath’s GS-R24 studio console, and the panel keeps everything physical: knobs, a 60mm main fader and no menus to dig through mid-show.
Four mic and line inputs take separate XLR and TRS sockets, with 48V phantom power for condensers and low-cut filters for rumble. Two of the channels add guitar DI high impedance inputs, handy when a guest brings an instrument. The 3-band MusiQ EQ shapes each voice, and the USB output source can be set up in several ways to match the workflow, from straight multitrack channels to a mix that includes the aux and effects sends. USB playback returns to the mixer with its own controls, blended into the main mix and the aux mix independently, which is a clean way to play clips and theme music from the computer.
The internal effects engine holds 99 presets of reverbs, delays and combinations, with tap tempo for the delays. For podcasting, the useful trick is routing: the effects return can feed the headphone mix while staying out of the main mix, so a singer or a nervous first-time guest hears a touch of comfort reverb that never reaches the recording. Channels can be assigned to the headphone mix individually, an aux output feeds a monitor speaker or a second headphone path, and 8-LED metering watches the main level. Cubase LE for the computer and Cubasis LE for iPad are included, and an iOS device connects through the camera kit. The mixer measures 10.8 x 3.8 x 13.1 inches and weighs 4.85 lbs.
Behringer Xenyx Q1204USB: compression on every mic channel
The Q1204USB is a 12-input analog mixer whose podcast strength is a row of one-knob compressors, one on each of its four mic channels. A single knob per voice tames loud laughs and quiet endings while the show records, which is the kind of processing a small show needs most and understands least.
Four XENYX mic preamps carry +48V phantom power for condensers, and the mono channels add a British-style 3-band EQ and clip LEDs, so a hot signal shows itself before it distorts. Two aux sends per channel split the monitoring and effects jobs: one pre-fader send builds a headphone or monitor feed, and one post-fader send feeds an external effects unit, with two stereo aux returns bringing it back. Mute and alt 3-4 routing on every channel, plus two subgroups with their own outputs, give a small show room to grow into live-to-tape formats with music and clips on separate faders.
The USB interface is stereo, sending the finished main mix to the computer and returning playback the same way. That is the honest limit of this mixer: it records the show as one stereo file, so voices cannot be separated afterward. For a solo host or a two-person show recorded in one take, that simplicity is a feature. The control room and headphone outputs have their own source matrix, the main outputs are balanced XLR, and the mixer is wireless-ready for Behringer’s digital wireless microphone system, which suits a roaming interview setup. Behringer also offers free recording, editing and podcasting software downloads to go with it.
TASCAM Model 12: the podcast workstation
The Model 12 is a mixer, a 12-track SD recorder, a 12-in/10-out USB interface and a DAW controller in one unit, and TASCAM built its podcast tools in from the start: mix-minus for remote guests, a dedicated smartphone input, and eight microphone inputs for a full table of voices.
Eight XLR and TRS combo inputs carry Ultra HDDA preamps with +48V phantom power, every channel has Hi-Z for instruments, and channels 1 and 2 add insert points for an outboard processor on the host’s voice. A 1-knob compressor and 3-band EQ sit on every input channel, and a 3-band mastering EQ with a sweepable mid band finishes the stereo mix. The recorder captures 12 tracks at once, the ten input channels plus the stereo mix, as 24-bit/48 kHz WAV files to SD cards up to 512 GB, with punch-in, overdub and a normalizing function that evens out track levels afterward. No computer is required to record a show.
Remote guests connect two ways. The 3.5mm TRRS smartphone input takes a phone call or a chat app, and mix-minus keeps the guest’s own voice out of the feed they hear. Bluetooth 5.0 adds a wireless audio feed for music or a second phone. Two headphone outputs can carry two different mixes, so the host and a guest each hear what they need. Over USB-C, the Model 12 sends 12 channels to the computer and takes 10 back, and its faders, mutes, pans and transport control the recording software through HUI and MCU emulation. An output delay of up to 2,000 ms, adjustable in 1 ms steps, lines the audio up with a camera for video podcasts. The unit measures 343 x 98.8 x 360 mm and weighs 4.3 kg.
Mackie Onyx8: multitrack USB with a color display
The Onyx8 is an 8-channel analog mixer with four Onyx preamps, multitrack recording over USB at up to 24-bit/96 kHz, and a full-color display called Studio Command that runs its effects and SD card functions from a single knob. It suits a show that wants multitrack files without a big desk.
The four preamps provide 60 dB of gain, enough for quiet dynamic broadcast microphones, and each channel carries a 3-band Perkins British-style EQ with a hard bypass switch, so a voice can be compared with and without EQ in one click. Switchable Hi-Z inputs take a guitar or bass for a musical guest. One aux send plus an effects send feed monitors and the internal engine. That engine, Mackie’s Dynamic FX, allows multi-parameter adjustment and has its own dedicated equalizer, and Studio Command stores up to six customizable presets, so a solo show and a two-host show can each keep a setting.
Recording runs two ways at once. USB sends 8 channels to a Mac or PC and takes 4 back, putting every mic on its own track for editing, while an SD card records the stereo mix directly as a backup and plays music files back for intros and breaks. Bluetooth streaming feeds phone audio into the aux sends or the main mix, a simple path for a call-in segment or a reference track. The steel chassis has sealed rotary knobs, backlit buttons that read clearly in a dim room, and side handles for carrying. Waveform OEM recording software with an unlimited track count and a 16-plug-in effects collection are included.
Behringer FLOW 8: the digital mixer that sets its own gain
The FLOW 8 is a small digital mixer controlled from a phone or tablet app, and its headline feature for podcasting is EZ-GAIN: play into the microphones for a few seconds and the mixer listens, then sets each channel’s gain on its own for the headroom it judges right.
The input count needs an honest read. Two Midas mic preamps sit on XLR inputs with individually selectable +48V phantom power and programmable gain. Two more combo XLR and TRS inputs take microphones or line sources, though they carry no phantom power, and two stereo line pairs add Hi-Z jacks for a guitar or bass. That makes the FLOW 8 a two-condenser show at most, with dynamics or line sources filling the rest. Every channel still gets digital treatment: 4-band EQ, a compressor, two effects sends and two monitor sends, while the main and monitor buses carry 9-band EQ and a limiter to catch peaks.
Two effects engines hold 16 presets each, mostly reverbs with delays and modulation. The FLOW app controls everything over Bluetooth, walks a new user through setup with a wizard that suggests presets and cable connections, and stores unlimited snapshots, with 15 preset slots on the hardware itself; one tap recalls a whole show, and a footswitch can load snapshots or mute effects hands-free. USB sends 10 tracks to the computer, the eight inputs plus the main mix, at 24-bit/48 kHz, and Bluetooth audio streaming plays music from a phone on a separate connection from the app. Power comes from the included supply or a USB power bank. The mixer measures 229 x 172 x 48 mm and weighs 1.4 kg.
PreSonus StudioLive AR12c: eight preamps and a backup recorder
The AR12c is a 14-channel analog mixer with eight XMAX mic preamps, the most microphone inputs in this guide, and a hybrid recording setup: multitrack over USB to the computer, plus a stereo SD recorder that captures the main mix on its own. It is the panel-show end of this guide, built for a table full of guests.
The eight preamps offer a gain range of +12 to +55 dB with equivalent input noise better than -128 dBu, and global +48V phantom power covers condensers across the board. Two instrument inputs with high impedance, 12 balanced line inputs and two insert points fill out the panel. Channels carry a 3-band analog EQ, and a mic and line boost helps low-level sources such as quiet broadcast microphones. The Super Channel, channels 13 and 14, gathers the playback jobs in one place: Bluetooth 5.0, RCA inputs, a 1/8-inch stereo input, and switchable playback from the SD card or the USB return, which is where theme music, clips and a phone feed belong.
A stereo effects processor holds 16 presets with a dedicated send and return and a footswitch jack for bypass, and the effects mix can be recorded with or without the dry channels for blending later. USB runs 14-in and 4-out at 24-bit/96 kHz over USB-C, recording every channel plus the main mix, and the included Capture software starts that multitrack recording with one click; a Fender Studio Pro license is included for editing. The SD recorder writes the main mix as 24-bit WAV at 44.1 kHz to cards up to 32 GB, a backup that keeps a panel show covered if the computer stops. The headphone output delivers 150 mW per channel at 60 ohms. The desk measures 381 x 90 x 397 mm and weighs 5.4 kg.
How to choose between usb mixers for podcasting
Count the voices first, then decide how the show gets edited. A solo host needs one good preamp and a simple path; a four-person panel needs four preamps at minimum and multitrack files, because four voices on one stereo track cannot be untangled afterward.
For one or two voices recorded in a single take, the Q1204USB covers the job with the least to learn, and its one-knob compressors do the most useful processing automatically. Two voices that need separate tracks point to the ZEDi-10FX or the Onyx8, both with four preamps and multitrack USB; the Onyx8 adds an SD backup and a display-driven effects engine, while the ZEDi-10FX adds the headphone-only effects routing. A host who records with guests in the room and callers on the phone should look at the Model 12, the only unit here with both mix-minus and a smartphone input, plus a recorder that needs no computer. Panel shows with up to eight microphones belong on the AR12c. The FLOW 8 fits a different need: a small show, a small space, and a host who would rather have the mixer set its own gain and recall the whole setup from a snapshot.
- Solo show, stereo file, least to learn: Behringer Xenyx Q1204USB
- Two to four voices on separate tracks: Allen & Heath ZEDi-10FX or Mackie Onyx8
- Remote guests plus in-room voices, no computer needed: TASCAM Model 12
- Panel shows up to eight microphones: PreSonus StudioLive AR12c
- Automatic gain and app control in a small room: Behringer FLOW 8
Headphone monitoring deserves a final check. Every speaker should hear themselves with no delay, and on a panel show each person may need a different level. The Model 12 answers with two headphone outputs carrying two different mixes. The ZEDi-10FX lets channels join the headphone mix one by one. On the simpler mixers, an aux send and a small headphone amplifier do the same job with extra hardware.
Video podcasts add one more demand: sync. When a camera records the picture and the mixer records the sound, even a small drift shows up over a long episode. The Model 12 answers with its adjustable output delay, and the multitrack mixers answer in editing, where separate tracks can be nudged into line with the picture. If the show is audio only, none of this matters, and the simpler stereo mixers stay in the running on equal terms.
Recording habits that make editing easier
Good files are made before the record button. Set each mic’s gain with the speaker talking at show volume, leave headroom for laughter, and keep every voice on its own track whenever the mixer allows it, because a multitrack file forgives mistakes that a stereo file keeps forever.
Run a backup whenever the hardware offers one. An SD card recording the main mix, as on the Model 12, the Onyx8 and the AR12c, turns a crashed laptop from a lost episode into a small delay. Record a minute of room tone at the start of the session as well; editing software uses it to fill gaps and smooth cuts. For remote guests, do a short test recording and listen for echo before the real session, and agree on headphones for everyone, since speakers in the guest’s room are the most common source of echo and bleed.
Keep the panel boring during the show. Mark the fader positions that worked, save a snapshot or preset where the mixer supports one, and resist adjusting EQ mid-episode unless something is clearly wrong. Note the time whenever a dog barks, a phone buzzes or a guest coughs over an answer; a written note with a time stamp saves long minutes of hunting through the file later. Consistency from episode to episode is what listeners hear as quality.
Conclusion
Match the mixer to the show: the Q1204USB for a simple stereo setup, the ZEDi-10FX or Onyx8 for multitrack editing, the Model 12 for remote guests, the AR12c for a full panel, and the FLOW 8 when automatic gain and app control matter most to you. Clean inputs, clear monitoring and a backup recording do the rest.