Key takeaways
- Find nightstands that sit level with a high mattress. Compare eight tall bedside tables by height, drawers, shelves, charging, and load capacity before you buy.
A tall bed leaves a short nightstand out of reach, so a lamp, phone, or glass of water sits too low to grab without leaning. The best nightstands for tall beds sit close to the top of the mattress, keep drawers within arm’s reach, and stay steady beside a high frame. This guide compares eight tall options by height, storage, and build.
Quick verdict
Height comes first, because a nightstand that sits far below the mattress forces a stretch every night, while one that towers above it turns the top into a shelf you reach across. The eight options below run from 29 inches to 37.5 inches tall, so most tall beds have a close match here.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| LOAKEKEL Night Stand | Set of 2 with fabric drawers | Shared bedrooms with charging | 30.2 inches high, 110 lb load capacity | Fabric drawers flex under heavy items |
| Yaheetech Tall End Table | Open 3-shelf end table | Narrow gaps beside a tall bed | 29.5 inches high, 14 inches wide | 22 lb load capacity, no drawers |
| Creso hom Tall Side Table | Slim charging side table | Compact bedside charging | 30 inches high, 2 AC outlets plus USB and Type-C | 11-inch depth suits small items only |
| T4TREAM Fluted Nightstand | Wide 3-drawer nightstand | Broad bedside surfaces | 32 inches high, 32 inches wide | No built-in charging or lighting |
| Yaheetech Tall Nightstand | Set of 2 with drawers and shelf | Matching closed storage on both sides | 29 inches high, 88 lb load capacity | 33.7 lb per unit, heavy to move |
| EnHomee Nightstands Set | Extra tall set of 2 with fabric drawers | Very thick mattresses | 37.5 inches high, 5 fabric drawers per unit | Top drawers sit high for shorter sleepers |
| VECELO Tall End Side Tables | Open 3-tier side tables | Visible storage and quick access | 30 inches high, 50 lb load capacity | No drawers or closed storage |
| RoyalCraft Nightstand | 2-drawer nightstand with open shelf | Drawers plus display space | 30 inches high, 18 inches wide | Open shelf leaves items exposed |
For most tall beds, the LOAKEKEL Night Stand is the most complete pick in this group, because it pairs a 30.2-inch height with four fabric drawers per unit, an open compartment, and charging on top of each unit. A set of 2 also suits a shared bedroom.
How we selected
Selection drew on published specifications and review pages, with height as the first filter and drawer reach, load limits, and anchoring details where the pages state them. Every option in this guide lists a height of 29 inches or more, so each one is meant to sit near the top of a raised mattress rather than below it.
Storage type came next, because a tall bed needs drawers and shelves that open within easy reach from a lying position. The group covers fabric drawers, wood-style drawers, open shelves, and mixed layouts, so a reader can match the layout to what they keep beside the bed each night.
Build details were taken from the same published descriptions, including frame material, drawer slides where stated, adjustable feet, anti-tip hardware where stated, and listed load capacity. No product here is presented as hands-on tested, and no claim in this guide goes beyond what the published pages state.
Best nightstands for tall beds
The eight nightstands below cover the main ways to furnish a tall bed, from a wide three-drawer cabinet to a slim charging table and an extra tall five-drawer set. Each entry names who the piece suits, what it holds, and where it falls short, so you can compare height and storage at a glance.
LOAKEKEL Night Stand
The LOAKEKEL Night Stand suits a shared bedroom where both sides of a tall bed need the same storage and the same charging. Its 30.2-inch height sits in the middle of the tall range, so it lines up with many high platform beds and thick mattresses on either side of the bed.
Each unit combines 4 fabric drawers with an open compartment, which gives concealed storage for personal items and a visible spot for a book or a phone. The maker lists a charging layout on top of each unit with a USB port, a Type-C charger, and 2 AC outlets, so a lamp and two devices can share the same surface.
The maker lists a load capacity of 110 lb, a listed weight of 17.6 lb, and a depth of 13.78 inches. The frame mixes iron with engineered wood, and the maker describes the top, side, and middle shelves as using FSC-certified wood panels with a coating described as easy to clean. Assembly takes around 40 minutes for the set, and the set includes 2 units.
What works well:
- 30.2-inch height matches many tall beds
- 4 fabric drawers plus an open compartment per unit
- USB port, Type-C charger, and 2 AC outlets on each unit
- 110 lb load capacity, the highest listed in this group
- Set of 2 for matching storage on both sides of the bed
What to watch:
- Fabric drawers can flex and hold less weight than wood drawer boxes
- Particleboard edges can chip with rough handling
- Assembly takes around 40 minutes for the set
Buy it if your tall bed needs concealed storage and charging on both sides, and the mattress top sits close to 30.2 inches. Skip it if you want solid wood drawer boxes.
Yaheetech Tall End Table
The Yaheetech Tall End Table suits a narrow gap beside a tall bed where a wide cabinet would crowd the walkway. Its slim frame trades closed storage for open shelves that keep books and small items in view, while the open shelves keep a book, a remote, and a glass within easy reach.
The table stands 29.5 inches high, measures 14 inches wide and 12 inches deep, and offers 3 open shelves plus a top surface for a lamp. That height sits close to the mattress line of many high platform beds, so a phone or a book on the top stays within easy reach from a lying position.
The maker lists a load capacity of 22 lb and a weight of 11.8 lb. The frame uses metal with iron legs and adjustable foot pads, which the maker describes as helping stability and helping protect the floor from slipping or scratches. Assembly is required, and the box includes the end table, assembly instructions, and an accessory kit.
What works well:
- 29.5-inch height suits many tall beds
- 14-inch width and 12-inch depth fit narrow gaps
- 3 open shelves plus a top surface
- Adjustable foot pads for stability and floor care
What to watch:
- 22 lb load capacity limits heavy tabletop items
- No drawers or enclosed storage
- Top surface is modest next to the tall, narrow frame
Buy it if you have a tight bedside gap, want open access to a few light items, and your mattress top sits near 29.5 inches. Skip it if you need drawers.
Creso hom Tall Side Table
The Creso hom Tall Side Table suits a compact bedside gap where charging matters as much as storage. It is a slim table with outlets built in, so a phone can charge beside a tall bed without a cord trailing across the floor. The slim depth keeps the table close to the frame.
The table stands 30 inches high, with a top that measures 11 inches deep and 15 inches wide, and it offers 3 open shelves below the top. That height belongs to the standard tall range, so it lines up with many raised mattresses, while the slim depth keeps the table close to the bed frame.
The maker lists 2 standard plug outlets, 1 USB port, 1 Type-C port, and a 4.9 ft extension cord. The maker lists a load capacity of 80 lb and a weight of 9.7 lb. The body combines engineered wood with a metal frame, and the maker describes 4 adjustable feet as steadying the unit on uneven floors and helping protect the floor from scratches.
What works well:
- 30-inch height matches the standard tall range
- 2 AC outlets, 1 USB port, and 1 Type-C port
- 4.9 ft extension cord for flexible placement
- 80 lb load capacity for a slim table
- 11-inch depth fits narrow bedside gaps
What to watch:
- Narrow shelves do not suit large items such as laptops
- 11-inch depth limits what fits on the top
- No drawers for concealed storage
Buy it if your tall bed sits in a tight gap and you want charging within arm’s reach. Skip it if you need a deep top or closed drawers.
T4TREAM Fluted Nightstand
The T4TREAM Fluted Nightstand suits a bedroom where the nightstand needs to share visual weight with a tall headboard. Its wide body and fluted front give the bedside a substantial look that a narrow table cannot. Its wide body suits a large lamp and a tall headboard.
The nightstand stands 32 inches high and measures 32 inches wide and 15.75 inches deep. That width gives a large lamp, books, and a glass of water room without crowding the top, and the 32-inch height sits at the top of the standard tall range for high platform beds.
The maker describes 3 smooth-gliding drawers as storage for smaller items, and the nightstand includes an anti-tipping kit for wall anchoring. The top uses a faux marble finish, and the maker describes the melamine veneer top as resisting water and easy to maintain, which helps with everyday spills.
What works well:
- 32-inch height and 32-inch width for a broad bedside
- 3 drawers for concealed storage
- Faux marble top with a water-resistant melamine veneer surface
- Anti-tipping kit included for wall anchoring
What to watch:
- 32-inch width needs generous bedside space
- No built-in USB charging or LED lighting
- Fluted panel gives dust more grooves to settle into
Buy it if you want a wide, tall nightstand with three drawers beside a high bed. Skip it if your bedroom is small, or if built-in charging is a priority.
Yaheetech Tall Nightstand
The Yaheetech Tall Nightstand suits a bedroom that needs two matching bedside units with closed storage beside a tall bed. Sold as a set of 2, it gives each side of the bed the same drawers and the same height. Both units share the same height and drawer layout.
Each unit stands 29 inches high and measures 16 inches deep, with 2 drawers and 1 shelf per unit. That height brings the top close to a high platform bed, while the drawers conceal daily clutter and the shelf adds a visible spot for a book or a small item.
The maker lists a load capacity of 88 lb and a weight of 33.7 lb per unit. The maker describes the metal roller drawer slides as smooth and quiet, and the spray-painted finish as waterproof and easy to clean, which helps with spills in a busy bedroom. An anti-tip kit is included to secure each unit to the wall.
What works well:
- 29-inch height suits high platform beds
- Set of 2 with 2 drawers and 1 shelf per unit
- 88 lb load capacity
- Metal roller drawer slides described as smooth and quiet
- Anti-tip kit included for each unit
What to watch:
- 33.7 lb per unit makes the set heavy to move
- Rearranging the pair later is inconvenient
- 16-inch depth needs more floor space than a slim table
Buy it if you want matching closed storage on both sides of a tall bed and your mattress top sits near 29 inches. Skip it if you move furniture often.
EnHomee Nightstands Set for extra tall beds
The EnHomee Nightstands Set suits a very thick mattress or a raised frame where a standard tall nightstand still sits too low. Its height goes well past the usual tall range, so it is the storage-first option in this guide, and the five drawers per unit add room for clothes.
Each unit measures 11.8 inches deep by 15.7 inches wide by 37.5 inches high. That height needs deliberate placement, because if the mattress top sits below the cabinet top, the surface works more like a tall dresser than a bedside table, and the top drawers sit high for shorter sleepers.
The maker lists 5 fabric drawers per unit, plus side pockets and hooks for small items, and an integrated LED light for soft night lighting. The set includes 2 AC outlets and USB ports for charging, and the maker lists a load capacity of 80 lb and a weight of 18 lb. A metal frame and adjustable feet help steady the tall cabinet.
What works well:
- 37.5-inch height for very thick mattresses
- 5 fabric drawers per unit, plus side pockets and hooks
- Integrated LED light for soft night lighting
- 2 AC outlets and USB ports for charging
- 80 lb load capacity
What to watch:
- 37.5-inch height can force a reach for top drawers
- Fabric drawers suit light items, not heavy equipment
- No solid wood construction or drawer slides
Buy it if your mattress top sits well above the usual tall range and you want generous drawer storage. Skip it if your mattress top sits near 30 inches.
VECELO Tall End Side Tables
The VECELO Tall End Side Tables suit a tall bed where quick access matters more than hidden storage. With three open tiers and no drawers, every item stays visible and easy to grab from the bed. Three open tiers hold books and lamps where you can see them.
Each table measures 23.6 inches long by 13.8 inches deep by 30 inches high. The 30-inch height sits in the standard tall range, so the top lines up with many raised mattresses, while the long side needs space even though the depth stays modest.
The maker lists a load capacity of 50 lb. Engineered wood forms the top and frame, and metal legs support the unit on adjustable feet after assembly. The maker describes the heavy metal frame as creating a stable structure, and the box includes instructions and tools for home assembly.
What works well:
- 30-inch height matches the standard tall range
- 3 open tiers for visible storage
- 50 lb load capacity
- Adjustable feet help level the unit on uneven floors
- Heavy metal frame described as stable
What to watch:
- No drawers or closed storage
- 23.6-inch length needs room along the bed
- Open shelves leave clutter visible
Buy it if you want open, visible storage beside a tall bed and you have room for the long footprint. Skip it if you need drawers.
RoyalCraft Nightstand
The RoyalCraft Nightstand suits a tall bed where one piece needs to do two jobs, with drawers for hidden items and an open shelf for things you reach for often. Its glossy white finish and X-shaped frame give it a clean look beside a high platform bed.
The nightstand stands 30 inches high and measures 18 inches wide and 14 inches deep. That height falls within the range described for standard tall nightstands, so the top sits near the mattress line of many high beds, while the 18-inch width and 14-inch depth create a substantial surface for a lamp, a cup, or a book.
The maker lists 2 drawers and 1 open shelf, with a load capacity of 80 lb and a weight of 24.7 lb. The surface uses painted engineered wood, and the published description notes that it can be wiped with a damp cloth for routine care. Assembly uses an included guide and installation tool.
What works well:
- 30-inch height for high platform beds
- 2 drawers plus 1 open shelf
- 18-inch width and 14-inch depth for a roomy top
- 80 lb load capacity
What to watch:
- Open shelf leaves items exposed to dust and knocks
- Fixed height cannot be adjusted after setup
- Glossy white finish shows marks more than a dark finish
Buy it if your tall bed needs a mix of drawers and display space, and your mattress top sits near 30 inches. Skip it if you want all storage closed.
Buying guide
A tall nightstand is a fit problem before it is a style problem, because height, depth, and drawer reach decide whether the piece works every night. Use the steps below in order, and measure the bed before you measure the furniture. A tape measure and ten minutes save a return.
Measure the mattress top first
Measure from the floor to the top of the mattress, not to the top of the bed frame, because the frame height does not tell you the usable bedside level. Take the measurement with the bedding on, since a thick topper or a heavy cover can add height that a bare mattress measurement misses.
Match height within two inches
The published guidance used for this guide puts the right nightstand height within 2 inches of the sleep surface height. As an illustration, if the bed measures 30 inches high, a nightstand from 28 to 32 inches puts the surface level with or slightly below it, which keeps a lamp, a phone, and a glass within a natural reach.
A nightstand that sits more than a couple of inches below the mattress forces a downward stretch for every item, while one that towers above the mattress turns the top into a ledge you reach across. Both faults show up every night, so a small height gap matters more than a small difference in drawer count or finish.
Choose drawers or open shelves for reach
Drawers and open shelves serve different nightly habits, so pick the layout that matches what you reach for in the dark. Closed drawers hide clutter and keep personal items out of sight, but they only help when the handles sit within reach from a lying position.
Check depth, width, and walkway space
Depth decides what fits on the top, because a phone, a lamp, a glass, and a current book need room to sit flat without hanging over the edge. A top that measures 11 inches deep suits a phone and a small lamp, while a top that measures 16 inches deep gives a roomier bedside arrangement with space to spare.
Anchor tall units and mind the load limit
A tall nightstand has a high center of gravity, so anchoring matters more here than it does for a low table. Anchor tall nightstands to the wall, especially beside an adjustable bed base, because the wall connection helps guard against tip-over when the mattress moves or someone leans on the top.
FAQ
The questions below cover the height, stability, storage, and charging choices that come up most often when a bed sits higher than a standard frame. Each answer follows the same published guidance as the rest of this guide, and the answers use the same numbers as the guide.
How high should a nightstand be beside a tall bed?
Measure from the floor to the top of the mattress, then aim for a bedside surface within 2 inches of that height. A 28 to 32-inch nightstand works when the bed measures about 30 inches high, and a 33 to 36-inch unit suits a loft bed or a thick mattress.
What keeps a tall nightstand from tipping?
Anchor the nightstand to the wall and leave 2 to 3 inches between it and the bed frame. Its base width should be at least half the table height, and any anti-tip hardware must be attached correctly before the bed is used each night. Level the feet and tighten the fasteners first.
Are fabric drawers a good choice beside a tall bed?
Fabric drawers suit light bedside items such as clothes, sleep masks, and small personal items, and they keep a tall cabinet lighter than wood drawer boxes would. The LOAKEKEL Night Stand and the EnHomee Nightstands Set both use fabric drawers to give four or five drawers per unit without a heavy build.
Do I need charging ports built into a nightstand?
Built-in charging suits a tall bed when the wall outlet sits far from the bed or behind the frame, because the ports put power where a phone cord can reach without crossing the floor. The LOAKEKEL Night Stand lists a USB port, a Type-C charger, and 2 AC outlets per unit, and the Creso hom table lists outlets, USB, and Type-C with a 4.9 ft cord.
Charging is not a must for every bedroom, and the T4TREAM Fluted Nightstand shows that a wide three-drawer cabinet can serve a tall bed with no built-in power at all. Skip the ports if a wall outlet already sits within easy reach, and keep the openings clear of dust and cords if you do choose a powered unit.
What to do when nightstands for tall beds run too short
Use a wall-mounted shelf when floor height does not work, because it can be set at the needed level and saves floor space. A C-table or a rolling cart can move with an adjustable bed, while furniture risers can lift a floor unit whose height is close to the mark.
If none of those fit, reconsider the bed height before buying a mismatched cabinet, because a nightstand that sits far below the mattress will frustrate you every night. Measure again with the bedding on and the base raised, then shop for the new number rather than settling for a unit that almost fits.
Conclusion
Start with the mattress top, pick a nightstand within 2 inches of it, and let storage and charging follow that fit. For most tall beds the LOAKEKEL Night Stand covers height, drawers, and power in one set, while the EnHomee set serves the highest beds and the slim tables suit tight gaps. Measure first, then choose storage to match.
Write Your Review
No reviews yet. Be the first to share your experience!