Updated Nov 17, 2026· 18 min read

Key takeaways

  • Find the right nightstand size for a queen bed, with six picks in the right height, width, and depth for standard frames, platform beds, and small rooms now.

Choosing the wrong bedside table leaves a lamp out of reach or a drawer that crowds the bed. The best size nightstands for queen size beds sit close to mattress height, stay in proportion to a 60 inch wide bed, and leave room to walk past. This guide explains the size rules, then compares six nightstands with stated dimensions.

Quick verdict

The short answer is to match height first, then width. A queen bed suits a nightstand 24 to 26 inches high and 22 to 24 inches wide in a standard room, with depth near 16 to 18 inches. The picks below cover that range, plus lower and narrower options for platform beds and tight rooms.

For a standard queen bed, the SIMPLIHOME Amherst Bedside Table is the closest match here. The maker lists it at 16 inches deep by 24 inches wide by 26 inches high, with 2 drawers and an open shelf below. That height suits a taller mattress top, and the 24 inch width fills the space beside a queen bed.

If the bed is lower, the CB2 Davison 24 inch Fluted Warm Oak 2-Drawer Nightstand is a strong second choice. The maker lists it at 24 inches wide by 15.25 inches deep by 23 inches high, which suits a mattress top near 22 to 25 inches. The Aitjunz Farmhouse set of 2 is the pick for a matched pair, with each stand listed at 15.5 inches deep by 26 inches wide by 23.6 inches high.

For a low platform queen bed, the Article Liv White Oak 1-Drawer Nightstand and the CB2 Shagreen 24 inch Warm White 2-Drawer Nightstand are the lower options. Liv is listed at 22.5 inches high by 20.5 inches wide by 15.25 inches deep, while Shagreen is listed at 23.5 inches wide by 16 inches deep by 21.5 inches high. For a very tight space, the VASAGLE Side Table ULET273B01 is listed at 11.8 inches deep by 13.4 inches wide by 22.8 inches high, with 3 open shelves and no drawers.

Product Type Best for Key spec Main limit
SIMPLIHOME Amherst Bedside Table 2-drawer table with open shelf Standard queen beds 16 inches deep by 24 inches wide by 26 inches high Tallest pick, so it can look high beside a low bed
CB2 Davison 24 inch Fluted Warm Oak 2-Drawer Nightstand 2-drawer nightstand Standard frames 24 inches wide by 15.25 inches deep by 23 inches high Shallower depth than some 2-drawer rivals
Aitjunz Farmhouse Night Stand Set of 2 2-drawer pair with charging station Matched pairs 15.5 inches deep by 26 inches wide by 23.6 inches high Widest pick, so it needs more wall space
Article Liv White Oak 1-Drawer Nightstand 1-drawer nightstand with open shelf Low platform queen beds 22.5 inches high by 20.5 inches wide by 15.25 inches deep One drawer only, so closed storage is limited
CB2 Shagreen 24 inch Warm White 2-Drawer Nightstand 2-drawer nightstand Low queen beds 23.5 inches wide by 16 inches deep by 21.5 inches high Lowest height in this set, so it suits low beds only
VASAGLE Side Table ULET273B01 3-shelf side table Tight spaces 11.8 inches deep by 13.4 inches wide by 22.8 inches high No drawers, so items stay on open shelves

How we selected

Selection started with published dimensions, not looks alone. Each pick lists a stated height, width, and depth that can sit beside a queen bed without crowding the room or leaving a large gap at the mattress edge. Storage type, materials, and stated features were then compared.

The size guide used here lists a queen mattress at 60 inches wide, with a recommended nightstand width of 20 to 24 inches and a depth of 16 to 18 inches. The same guide lists a standard nightstand at 24 to 28 inches high, and a queen bed in a standard room at 24 to 26 inches high, 22 to 24 inches wide, and 16 to 18 inches deep.

Height was treated as the first filter. The guide states that the ideal nightstand height should be within 1 to 2 inches of the mattress top, and it gives an example where a mattress top at 24 inches suits a nightstand between 23 and 26 inches tall. A low platform bed suits a nightstand 18 to 22 inches high, while a bed with a box spring suits a nightstand 24 to 28 inches high.

Each product was read on a maker or retailer page that stated its dimensions in full. The exact name, the stated dimensions, the drawer count, the materials, and any stated features were copied from that page. No product was added from memory, and no dimension was guessed to fill a gap. Where a maker does not state a fact, this article leaves it out.

Best size nightstands for queen size beds: the picks

The six picks below span heights from 21.5 inches to 26 inches, so the list covers low platform beds, standard frames, and taller setups with a box spring. Widths run from a narrow 13.4 inches to a broad 26 inches, with most picks in the 20 to 24 inch band for a queen bed.

SIMPLIHOME Amherst Bedside Table

The Amherst is the tallest pick in this set, and it suits a queen bed with a higher mattress top. The maker lists it at 16 inches deep by 24 inches wide by 26 inches high, with a weight of 31.3 pounds. That size lands in the middle of the queen width band and at the top of the standard room height band.

This table is for a reader who wants a traditional bedside table with closed storage and an open shelf in one piece. The maker describes it as handcrafted from solid wood, with a rustic natural aged brown finish, a molded crown edged tabletop, panel framed drawer fronts, and bronze round pulls. The maker lists 2 drawers with metal glides, plus 1 open shelf below, a tabletop thickness of 0.5 inches, and a leg length of 3.94 inches.

The size fit is direct. A width of 24 inches matches the top of the recommended 20 to 24 inch band for a queen bed, so the table looks in proportion beside a 60 inch wide mattress. A depth of 16 inches matches the low end of the 16 to 18 inch depth band, and a height of 26 inches suits a mattress top near 24 to 28 inches, which the guide links to a bed with a box spring and mattress. At 26 inches high, this table can look tall beside a low platform bed. The maker lists a maximum weight recommendation of 25 pounds. Full assembly is required, and the maker lists 2 people for assembly.

  • Pros: height and width match a standard queen bed; 2 drawers plus an open shelf; solid wood frame with bronze pulls; tapered legs and crown edge suit traditional rooms
  • Cons: tallest pick, so it can overwhelm a low bed; maximum weight recommendation is 25 pounds; full assembly is required
  • Buy if: the mattress top sits near 24 to 28 inches and the room has space for a 24 inch wide table
  • Skip if: the bed is a low platform, or the wall space beside the bed is under 24 inches wide

CB2 Davison 24 inch Fluted Warm Oak 2-Drawer Nightstand

The Davison is a clean, mid height pick for a standard queen bed. The maker lists it at 24 inches wide by 15.25 inches deep by 23 inches high, with 2 drawers. That height sits just below the standard 24 to 28 inch band, so it suits a mattress top in the low to middle range.

This nightstand is for a reader who wants a modern wood piece with texture but no fuss. The maker describes carved fluting that wraps the entire case, with a top surface and plinth base crafted from oak with a tonal stain. Storage is split across 2 drawers, with no open shelf listed, so most bedside items stay hidden.

The size fit is close to the queen guide. A width of 24 inches is at the top of the 20 to 24 inch band, so the piece holds its own beside a 60 inch wide bed. A depth of 15.25 inches is just under the 16 to 18 inch band, which helps in a tight room. A height of 23 inches suits a mattress top near 22 to 25 inches, which the guide links to a standard bed frame and mattress. The depth is shallower than the Amherst, so a wide lamp base may overhang the front edge, and the height can look low beside a tall bed. The maker does not state drawer interior dimensions or weight on the page read, so those facts are not listed here.

  • Pros: 24 inch width suits a queen bed; fluted oak case adds texture; 2 drawers keep the top clear; shallow depth helps tight rooms
  • Cons: 23 inch height can look low beside a tall bed; depth is under 16 inches; drawer interior size is not stated on the page read
  • Buy if: the mattress top sits near 22 to 25 inches and the room needs a 24 inch wide table with a slim depth
  • Skip if: the bed is tall with a box spring, or a deep drawer is needed for large books

Aitjunz Farmhouse Night Stand Set of 2

This set is the pair pick in this guide, with two matching stands for both sides of a queen bed. The maker lists each stand at 15.5 inches deep by 26 inches wide by 23.6 inches high, with 2 drawers, an open shelf, and a charging station. The set includes 2 items.

This set is for a reader who wants symmetry without shopping twice. Two matching stands give the bed a balanced look, and the same height on both sides keeps lamps at the same level. The maker describes a farmhouse style with Roman column legs, a wood frame, and an engineered wood top in white. The charging station is listed in the title, so a phone can charge at the bedside.

The size fit is broad. A width of 26 inches is above the 20 to 24 inch queen band, so each stand makes a clear statement beside the bed. That width suits a large bedroom where the wall on each side is long enough to hold a 26 inch table plus a gap to the bed. A height of 23.6 inches suits a mattress top near 22 to 25 inches, and a depth of 15.5 inches keeps the piece close to the wall. At 26 inches wide, each stand needs more wall space than a 20 to 24 inch stand, and a pair needs twice that space. The maker does not state a weight limit on the page read. The title lists a height of 26 inches while the stated dimensions list 23.6 inches high, so use the stated dimensions as the size to measure against. Assembly is required, with an Allen key and screwdriver listed as tools.

  • Pros: matched pair gives a balanced look; 26 inch width suits a large queen bedroom; 2 drawers plus open shelf in each stand; charging station listed in the title
  • Cons: widest pick, so it needs the most wall space; title height and stated height differ, so measure from the stated dimensions; weight limit is not stated on the page read
  • Buy if: the bedroom is large, both sides of the bed have room for a 26 inch stand, and a matched pair is wanted
  • Skip if: the room is small, or one side of the bed sits close to a wall or door

Article Liv White Oak 1-Drawer Nightstand

Liv is the low, light pick for a platform queen bed. The maker lists it at 22.5 inches high by 20.5 inches wide by 15.25 inches deep, with a weight of 34.5 pounds. That height sits below the standard 24 to 28 inch band, which is the point for a low bed.

This nightstand is for a reader who wants a simple bedside table with one drawer and an open shelf below. The maker describes a brass handle, a fluted drawer, and spindle legs, with a soft close drawer and an open lower storage area. The maker lists drawer dimensions of 3 inches high by 16.5 inches wide by 11.75 inches deep, so the drawer suits flat items such as a phone, glasses, and a notebook. The maker lists a clearance of 5.5 inches for the lower space, so only flat books or a slim basket will fit there.

The limits are clear. One drawer means less closed storage than the 2-drawer picks. The height of 22.5 inches can look low beside a tall bed. The maker lists some assembly required, at about 10 minutes, and anti-tip hardware is included. Materials are listed as solid and veneered oak, MDF, plywood, stainless steel, and brass, with a brushed brass handle. Wipe with a soft damp cloth, do not use harsh household cleaners, and keep the piece away from radiators and other heat sources, since the maker notes that heat can dry wood and shift joints.

  • Pros: 22.5 inch height suits low platform beds; 20.5 inch width fits the queen band; soft close drawer with brass handle; open shelf adds storage; anti-tip hardware included
  • Cons: one drawer only; open shelf clearance is 5.5 inches, so it suits flat items only; height can look low beside a tall bed
  • Buy if: the bed is a low platform or a standard frame with a thin mattress, and one drawer is enough
  • Skip if: the bed is tall, or two closed drawers are needed for bedside storage

CB2 Shagreen 24 inch Warm White 2-Drawer Nightstand

Shagreen is the lowest pick in this set, and it suits a queen bed with a low mattress top. The maker lists it at 23.5 inches wide by 16 inches deep by 21.5 inches high, with 2 drawers. That height is below the standard band, so it is a clear choice for a low bed rather than a tall one.

This nightstand is for a reader who wants a light, textured piece that stands out without adding bulk. The maker describes faux embossed shagreen wrapped by hand around the case, with a slim, open brass frame below. Storage is in 2 drawers, with no open shelf listed, so the front stays clean and bedside items stay hidden.

The size fit is neat for a low queen bed. A width of 23.5 inches sits in the 20 to 24 inch queen band, so the piece looks in proportion beside a 60 inch wide mattress. A depth of 16 inches sits at the low end of the 16 to 18 inch depth band, so it does not push into the walking lane. A height of 21.5 inches suits a low platform bed with a mattress top at 16 to 20 inches, or a standard bed with a thin mattress. At 21.5 inches high, this piece can look short beside a standard bed with a mattress top near 24 to 28 inches. The maker does not state drawer interior dimensions or weight on the page read, so those facts are not listed here.

  • Pros: 23.5 inch width suits a queen bed; 16 inch depth fits the guide band; 2 drawers keep items hidden; light finish and brass frame suit pale rooms
  • Cons: lowest height in this set, so it suits low beds only; drawer interior size is not stated on the page read; no open shelf listed
  • Buy if: the mattress top sits near 16 to 22 inches and a light, textured nightstand is wanted
  • Skip if: the bed is a standard or tall frame with a thick mattress, or an open shelf is needed

VASAGLE Side Table ULET273B01

The VASAGLE table is the narrow pick for a tight space beside a queen bed. The maker lists it at 11.8 inches deep by 13.4 inches wide by 22.8 inches high, with a weight of 10.8 pounds. That size is well below the queen width band, so it is a space saver rather than a full size nightstand.

This table is for a reader who has little wall space beside the bed but still wants a surface for a phone, a book, and a small lamp. The maker describes a robust steel frame and particleboard shelves, with 3 open shelves for easy access, adjustable feet, and a rustic brown top with a black frame. The maker lists a maximum weight recommendation of 44 pounds per level, so spread heavy items across shelves.

The size fit is for a gap, not a full bay. A width of 13.4 inches fits in a narrow space between the bed and a wall, a door, or a dresser, where a 20 to 24 inch nightstand would not fit. A depth of 11.8 inches is below the 12 to 14 inch small room band, so the table does not push into the walking lane. A height of 22.8 inches suits a mattress top near 22 to 25 inches, which the guide links to a standard bed frame and mattress. With no drawers, there is no closed storage, and dust can settle on open shelves. The narrow top holds a small lamp only. The maker lists a frame material of metal and a top material of engineered wood, and assembly is required, with an Allen key and screwdriver listed as tools.

  • Pros: narrow 13.4 inch width fits tight spaces; 22.8 inch height suits a standard mattress top; 3 open shelves; 44 pound limit per level; adjustable feet
  • Cons: no drawers, so storage is open only; top is narrow, so it suits a small lamp only; light weight at 10.8 pounds means it can move if bumped
  • Buy if: wall space beside the bed is under 16 inches wide, or a second small table is needed for a phone and a book
  • Skip if: closed drawers are needed, or a wide lamp and many bedside items must fit on top

Buying guide

Size is the first choice, and style is the second. Measure the bed, the wall, and the walking lane before ordering, then match the nightstand to those numbers. A table that looks right in a photo can still fail in a room if the height is off by a few inches.

Measure your mattress top first

Start with a tape measure at the side of the bed, from the floor to the top of the mattress, with bedding in place. That number is the target for the nightstand top, and the guide used here states that the ideal height should be within 1 to 2 inches of that number. A mattress top at 24 inches suits a nightstand between 23 and 26 inches tall.

Height rules that match the mattress

Height decides comfort more than any other size. A top that sits level with the mattress, or just below it, lets a hand reach a phone, a glass, or a book without lifting the arm high or reaching down. A top that sits well above the mattress can block the view of the lamp and make the bed feel boxed in.

Width and depth that suit a queen size bed

Width decides proportion. A queen mattress is 60 inches wide, and the guide lists a recommended nightstand width of 20 to 24 inches and a depth of 16 to 18 inches for that bed. A queen bed in a standard room is listed at 22 to 24 inches wide and 16 to 18 inches deep, which is a useful target for most rooms.

A width in the 20 to 24 inch band looks balanced beside a queen bed. It gives room for a lamp, a book, and a phone on top. A width below 18 inches can look small, while a width above 26 inches can crowd the wall. A depth of 16 to 18 inches keeps the front edge close to the bed. The guide lists at least 24 to 30 inches of walking space past the nightstand, 2 to 4 inches to the bed, and 1 to 2 inches behind it for cables.

Storage, drawers, and open shelves

Storage decides how tidy the bedside stays. Drawers hide chargers, glasses, and personal items, while open shelves keep books and baskets within reach. A mix of both suits most readers, since some items should be hidden and some should be easy to grab.

Count drawers by use, not by number alone. One drawer, as on the Liv, suits a phone, glasses, and a notebook. Two drawers, as on the other picks here, suit a reader with more items to hide. A drawer that is 3 inches high by 16.5 inches wide by 11.75 inches deep, as listed for Liv, suits flat items. The Amherst lists 1 open shelf, the Aitjunz lists an open shelf in each stand, and the VASAGLE lists 3 open shelves. An open shelf with the 5.5 inch clearance listed for Liv suits flat books only.

Style, materials, and care

Style should follow size, not lead it. A nightstand that fits well will look right even if the style is simple, while a stylish piece that is too tall or too wide will look wrong every day. Choose the size first, then pick a finish that matches the bed frame and the floor.

Materials shape weight, care, and feel. Solid wood, as listed for the Amherst and for Liv in part, feels heavy and ages with use. Veneered wood, MDF, and particleboard, as listed for several picks here, are lighter and can look clean in a modern room. Steel, as listed for the VASAGLE frame, is light and strong, while brass, as listed for Liv and Shagreen, adds a warm accent. Wipe wood with a soft damp cloth and dry it at once, and do not use harsh cleaners on a lacquered top. Keep wood away from radiators and direct heat, since the maker notes for Liv that heat can dry wood and shift joints.

FAQ

These answers cover the size questions that come up most often for a queen bed, using the size bands from the guide read for this article and the stated dimensions of the picks above. Read the short answer first, then the detail that fits the bed in the room.

What size nightstand fits a queen size bed?

A queen bed suits a nightstand 24 to 26 inches high and 22 to 24 inches wide in a standard room, with depth near 16 to 18 inches. That size comes from the guide used here, which lists a queen mattress at 60 inches wide, a recommended width of 20 to 24 inches, and a recommended depth of 16 to 18 inches.

How tall should a nightstand be?

The nightstand top should sit within 1 to 2 inches of the mattress top. That rule comes from the guide used here, which gives an example where a mattress top at 24 inches suits a nightstand between 23 and 26 inches tall. A top at that height lets a hand reach a phone or a glass without lifting high or reaching down.

Should both nightstands match?

Matching nightstands give a calm, balanced look, and they keep lamp heights equal on both sides of the bed. A matched pair, such as the Aitjunz set of 2, is the simplest way to get that look, since both stands share the same height, width, and depth. That symmetry suits a traditional bedroom and a bed that sits in the middle of a wall.

How much space should sit between the bed and the nightstand?

Leave 2 to 4 inches between the nightstand and the side of the bed. That gap comes from the guide used here, and it lets the bedding be made without moving the table, while keeping the table close enough to reach. A larger gap makes the table feel far away, while no gap lets the table rub the mattress and bedding.

Can a nightstand be wider than 24 inches?

Yes, a nightstand wider than 24 inches can work beside a queen bed, but only if the room has space for it. The guide lists a large nightstand at 26 to 30 inches wide, and the Aitjunz pick here is 26 inches wide. That width suits a large bedroom with a long wall on each side of the bed.

Conclusion

Measure the mattress top, then choose a nightstand 24 to 26 inches high and 22 to 24 inches wide for a standard queen bed, with depth near 16 to 18 inches. The Amherst suits taller beds, the Davison suits standard frames, and Liv and Shagreen suit low beds. Pick the size first, and the room will feel balanced every night.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.