Updated Nov 16, 2026· 14 min read

Key takeaways

  • Six battle mixers that activate Serato DJ Pro and Serato DVS, with control vinyl support, performance pads, and the crossfaders scratch DJs depend on nightly.

A digital vinyl setup lives or dies on the mixer at its center, and these mixers for serato dvs setup picks all state Serato DJ Pro and DVS support on the page, activating the software or bundling the license so turntables and control vinyl can run the show. Each one also brings the pads, effects, and fader feel a scratch routine demands.

Quick verdict

The short answer is that every mixer here removes the software question from a DVS build: each one either activates Serato DJ Pro and its DVS expansion when connected, or bundles the DVS license in the box. What separates them is screen, pads, faders, and how much hardware effects power rides along.

  • Pioneer DJ DJM-S11: the feature leader, with a 4.3-inch touch screen, Deck 3/4 control, Combo Pad and Scratch Bank modes, and dual USB interfaces.
  • RANE SEVENTY-TWO MKII: the touchscreen Rane, with dual DVS inputs, a Serato DJ Pro DVS license, and control vinyl included in the box.
  • Pioneer DJ DJM-S7: the S11’s leaner sibling, keeping the 22 Beat FX, effect levers, and full DVS access, and adding Bluetooth audio and Loop MIDI.
  • Numark Scratch: the value pick, with a Serato DJ Pro and DVS license included, an InnoFader crossfader, and software FX paddles.
  • Reloop ELITE: the pad player’s pick, with 16 RGB pads running up to 12 modes per deck and the full Serato DJ Pro plus DVS pack bundled.
  • RANE SEVENTY: the focused battle tool, a Serato DVS hardware-activated mixer with MAG FOUR faders and six Flex FX engines, minus the big screen.

Read on for how each mixer states its DVS support, what arrives in the box, and the buying points that matter once the software question is settled.

How we selected mixers for serato dvs setup

Selection started with the software statement, because a DVS setup fails at the first step if the mixer cannot run Serato DVS. A mixer qualified only when its product page stated Serato DJ Pro and DVS support in words: hardware activation, a bundled DVS license, or the DVS expansion pack included.

That filter is stricter than it sounds. Several respected club mixers describe Serato control modes or upgrade paths in hedged wording, and at least one four-channel flagship was left out for exactly that reason: its pages talk about controller modes and upgrade readiness rather than stating DVS support outright. Every pick below states it plainly, and most go further by naming what is included, from control vinyl to Pitch ‘n Time vouchers.

With the software settled, the comparison turned to the hardware a DVS DJ actually touches. Crossfader quality leads, because the fader is the instrument in a scratch routine: magnetic and non-contact designs from Pioneer DJ, Rane, and InnoFader dominate this list. Pads follow, since hot cues, rolls, and scratch banks now live under the thumbs. Dual USB connections matter for back-to-back sets and changeovers, and hardware effects decide how much of the set can run without reaching into the software.

All six picks are two-channel battle mixers, which reflects the DVS market honestly: turntablists play on two decks, and the mixers built to activate Serato DVS are built for them. Channel count is the one spec that will not separate these picks; everything else will.

Comparison table

The table lines the six mixers up by how each states its Serato DVS support, its crossfader, and its pad layout. Use it to spot the activation style you prefer and the fader you want under your fingers before the detailed sections. Every row passed the same test: the page states Serato DVS support in words.

Product Serato DVS support stated on page Crossfader Performance pads Standout feature
Pioneer DJ DJM-S11 Activates Serato DJ Pro and Serato DVS MAGVEL FADER PRO 8 per side 4.3-inch touch screen, Deck 3/4 control
RANE SEVENTY-TWO MKII Serato DJ Pro DVS license and DVS vinyl included MAG FOUR 16 MPC-style Dual DVS inputs, 4.3-inch touchscreen
Pioneer DJ DJM-S7 Activates Serato DJ Pro, DVS control included Magvel Fader Pro 8 large per channel Effect levers, Bluetooth audio, Loop MIDI
Numark Scratch Serato DJ Pro with DVS license included InnoFader 4 per deck Software FX paddles, instant loop encoder
Reloop ELITE Serato DJ Pro with DVS Expansion Pack included Mini Innofader Pro 16 RGB, up to 12 modes per deck Dual 10-in/10-out USB interfaces
RANE SEVENTY Serato DVS hardware activated MAG FOUR 16 MPC-style Six Flex FX engines, FX paddles

Two activation styles appear. The Pioneer DJ pair and the Rane Seventy activate the software while connected, while the Seventy-Two MKII, Scratch, and ELITE bundle licenses or expansion packs, and the ELITE and Seventy-Two MKII even include the control records themselves.

The mixers for serato dvs setup in detail

Each section below leads with the mixer’s stated Serato support, then covers the fader, pads, and effects that shape a routine. All six are two-channel designs, so the differences live in control depth and feel rather than in channel count. Two carry touchscreens; the rest keep the laptop in charge of the display.

Pioneer DJ DJM-S11

The DJM-S11 states its support in a spec table: the mixer activates Serato DJ Pro, and its DVS control activates Serato DVS, with Pioneer DJ’s own line that Serato DVS lets you control and scratch with CDJs or turntables. That wording matters, because it is the mixer’s own promise rather than a store’s summary of it.

The hardware is the deepest here. A 4.3-inch customizable touch screen shows waveforms and hosts Touch FX and Touch MIDI, so software functions can be triggered without the laptop. Deck 3/4 control plays up to four tracks through the two channels, and Deck Move shifts a track between decks without a break. Eight performance pads per side run modes including Combo Pad, which layers up to four pad modes at once in Serato DJ Pro, and Scratch Bank, which loads assigned scratch samples from a tap. The MAGVEL FADER PRO crossfader anchors the layout, with 22 Beat FX, five Sound Color FX, and Smooth Echo for transitions.

Two USB audio interfaces on separate USB-B ports make changeovers simple, two USB-A ports form a hub for controllers and players, and the mixer is fully MIDI assignable. Inputs cover two line and two phono RCA pairs, a combo mic input, and an aux input; master runs on XLR and RCA with a TRS booth output. Audio runs at 48 kHz and 24-bit with a 115 dB USB signal-to-noise ratio, and the frame measures 267 by 107.9 by 452.2 mm at 5.2 kg. A Serato Pitch ‘n Time DJ voucher is in the box. For DVS DJs who want the mixer to double as the control center, this is the complete package.

RANE SEVENTY-TWO MKII

The SEVENTY-TWO MKII bundles its support: the page lists a Serato DJ Pro DVS license, Pitch ‘n Time, and Serato DVS vinyl included, so the box holds the software rights and the control records a turntable setup needs on day one. No separate software purchase stands between the box and a working DVS rig.

Its 4.3-inch color touchscreen relays Serato’s moving waveforms and handles navigation, track selection, and FX control. Dual DVS inputs, switchable between aux and phono/CD, widen the wiring options for turntables and media players. Three MAG FOUR faders cover the channels and crossfader, with reverse, contour, and cut-in adjustment plus external and internal tension controls, so the cut can be tuned from the panel and inside the unit. Sixteen Akai MPC-style pads carry independent mode controls per deck, and toggle controls handle instant doubles, silent cue, and sync.

Effects run deep: dual Flex FX engines, one per channel, stack with Serato’s own effects for layered processing. Dual USB connections support two-DJ handoffs, USB controller inputs accept Rane Twelve battle controllers, and two Neutrik combo mic inputs carry their own tone and level switches. Session RCA inputs and outputs, a balanced XLR main, and a balanced quarter-inch booth output cover the booth wiring, and the construction is solid steel. DJs who want the license and vinyl handled, plus a screen, will land here.

Pioneer DJ DJM-S7

The DJM-S7 states that it gives free use of Serato DJ Pro and rekordbox performance features, including DVS control of both applications, and a Serato Pitch ‘n Time DJ expansion voucher is included in the box. Connect a laptop and the software is ready, with no license key to type in.

It inherits the DJM-S11’s layout language at a leaner spec. Eight large performance pads sit on each channel with independent pad modes, and Serato DJ Pro adds Combo Pad mode, Scratch Bank, and Gate Cue. All 22 built-in Beat FX from the S11 are here, worked through large effect levers with six FX Select buttons and an OLED display showing the effect name and beat value. The Magvel Fader Pro returns with its crossfader shaft rigidity boosted by 30 percent in the vertical direction.

Two additions set it apart. Bluetooth audio lets a phone feed loops, requests, or a backup source straight into the master output or either channel. Loop MIDI, exclusive to this model, lets the effect levers send MIDI messages to the software in rhythm, turning effect gestures into timed control changes. A built-in USB hub connects players and controllers. For open-format DJs who play Serato DVS nightly and want the S11’s effects without its screen, the S7 is the natural fit.

Numark Scratch

The Scratch states its bundle plainly: Serato DJ Pro with DVS license included, ready to connect timecoded records or deck controllers, and Numark’s line that the mixer activates Serato DVS for Serato DJ Pro instantly. Control vinyl and CDs are sold separately.

The hardware keeps the battle essentials and skips the screen. The built-in InnoFader crossfader carries reverse and slope control switches above it for hamster style and curve changes. Four performance pads per deck handle cues, rolls, and samples. Six dedicated software effects launch from dual paddle triggers with a dry/wet control, an arrangement borrowed from far pricier mixers. Filter knobs sweep low-pass and high-pass per channel and keep working with analog turntables, and a dedicated instant loop encoder sets loops by pressing and turning.

Sound runs at 24-bit and 48 kHz through a 32-bit DSP, in an all-metal chassis measuring 12.05 by 9.61 by 3.32 inches. A combo mic input with tone control, dual headphone outputs in quarter-inch and eighth-inch, an XLR main output, an unbalanced booth output, and phono and line inputs per channel round out the panel. For a first DVS rig or a backup battle mixer, the Scratch covers the format’s core at the lowest commitment here.

Reloop ELITE

The ELITE states that the full version of Serato DJ Pro, including the DVS Expansion Pack, is provided plug and play, and the box adds two Serato control records with NoiseMap technology, the most complete DVS starter bundle in this guide. It is the only pick that bundles both the full software and the records.

Pads are its headline: 16 extra-large velocity-sensitive RGB pads control up to 12 performance modes per deck, including Hot Cue, Loop Roll, Slicer, Sampler, Pitch Play, Saved Loop, Saved Flips, Platter Play, and Transport, through four mode buttons over three layers, with each deck’s modes set independently. Three Mini Innofader Pro faders use non-contact sensing, with individually adjustable curves, a reverse function, and digital cut-in adjustment from the setup menu.

The effects section pairs three assignable Serato effect slots per deck, fired by hold or toggle buttons with mini-fader depth control, with standalone Tweak FX: Filter, Crush, Flanger, White Noise, and a user mode on bipolar knobs. Dual 10-in/10-out USB 2.0 interfaces at 24-bit connect two computers at once, two OLED displays show effects and BPM data, and a Smart Link USB hub takes controllers and storage. The 3-band isolator EQ offers full kill, and the metal frame measures 290 by 414 by 107.5 mm at 6 kg. Pad-driven performers get the deepest control surface here.

RANE SEVENTY

Serato’s own quick-start guide states the SEVENTY’s status twice over: it activates Serato DJ Pro on connection, and it is a Serato DVS hardware-activated device that switches on the DVS expansion pack when connected, letting turntables or CD players control Serato DJ Pro with NoiseMap control records or CDs.

The mixer is the SEVENTY-TWO concept with the big touchscreen traded for focus. Three MAG FOUR contactless faders, 50 percent lighter than their predecessors, pair with an external crossfader tension adjustment. Six dual post-fader internal Flex FX engines work alongside Serato’s software effects, selected with radio-style buttons and fired through dual die-cast aluminum FX paddles that rotate 180 degrees. Sixteen Akai Professional MPC pads, eight RGB pads per deck, run Hot Cue, Saved Loop, Roll, Sampler, Transport, Pitch Play, Saved Flip, and Scratch Bank modes with independent controls per deck.

Dual USB connections handle DJ handoffs, a connection hub accepts Rane Twelve controllers, and dual microphone inputs, a 114 dB signal-to-noise ratio, and solid steel construction with a front guard handle complete the brief. Battle DJs who found the flagship’s screen more than they need get the same faders, pads, and DVS activation here.

Buying guide: getting mixers for serato dvs setup right

Once a mixer states its Serato DVS support, the buying decision turns to how the license works, how the fader feels, and how the booth is wired. The five points below cover the checks that separate a good DVS purchase from a frustrating one. None of them is expensive to get wrong in isolation; together they decide how the rig feels.

Activation, license, or expansion pack: know which you are getting

Hardware-activated mixers, the DJM-S11, DJM-S7, and Rane Seventy, activate Serato DJ Pro and DVS while they are connected, so the software follows the mixer. License bundles, on the Seventy-Two MKII, Scratch, and ELITE, put software rights in the box.

The ELITE and Seventy-Two MKII add control records too. Neither style is better, but they differ when you sell, lend, or replace gear, so know which one your money buys.

Crossfader feel decides scratch comfort

Every pick here uses a magnetic or non-contact performance fader, and the differences are in adjustment. The Rane pair offers tension adjustment, the ELITE sets cut-in points digitally, and the Scratch puts reverse and slope switches above the fader.

If your routine leans on one technique, crab scratches or flares, match the fader’s adjustment style to it, because you will touch this control more than any other on the mixer.

Dual USB ports earn their keep at changeovers

Two USB connections let the next DJ plug in and be ready before the current set ends, which is how festival and battle changeovers stay invisible. The S11, Seventy-Two MKII, Seventy, and ELITE all carry dual USB audio paths. Solo home DJs can ignore this point; anyone playing back-to-back sets should treat dual USB as close to required.

Pads and effects shape your routine

Pad count and modes decide how much of Serato lives under your thumbs: the ELITE reaches 12 modes per deck, the Ranes and S11 cover the core modes with Scratch Bank, and the Scratch keeps four pads per deck focused on cues, rolls, and samples. Hardware effects deserve the same scrutiny as the pads themselves.

Effects split similarly between hardware engines, like Rane’s Flex FX and Reloop’s Tweak FX, and software effects fired from paddles or levers. Routines built in the software favor deep pad modes; routines built on the mixer favor hardware effects.

Keep an analog path for real vinyl

A DVS mixer still earns its place on real records night. Phono inputs are standard across these picks, and details like the Scratch’s filter knobs, which work without the software, keep an all-vinyl set fully functional. The turntables, after all, were never only timecode players.

If your collection mixes control vinyl and original pressings, confirm the phono inputs and any standalone features you rely on before choosing, so the analog half of the rig never feels like an afterthought.

FAQ

Five questions cover the ground DVS buyers ask about most: what DVS does, whether the software costs extra, playing real vinyl, the difference between activation styles, and working with other DJ programs. If you are new to digital vinyl, start with the first two; the rest settle the details owners argue about.

What does DVS actually do?

DVS, short for digital vinyl system, lets turntables or CD players control digital files. A control record or CD plays a timecode signal into the mixer, the software reads the signal’s speed and position, and it plays the loaded track to match, including scratches, backspins, and pitch rides. The hands feel vinyl; the library stays on the laptop.

Do I need to buy Serato DJ Pro separately with these mixers?

No. Each mixer in this guide either activates Serato DJ Pro and DVS while connected or bundles the license and expansion in the box. What varies is the control media, and that is the one line item worth double-checking before a purchase, because control records are cheap to buy later but annoying to lack on day one.

The ELITE and Seventy-Two MKII include Serato control records, while the Scratch’s page notes control vinyl and CDs are available separately, so read the box contents before assuming records are inside.

Can I play regular vinyl records on a DVS setup?

Yes. Every pick here has phono inputs for turntables, and switching a channel from DVS to phono returns it to ordinary record playback. Battle mixers are built for turntables first, so the analog path is a core feature rather than a bonus. Many DJs mix both in one set, control vinyl on one deck and an original pressing on the other.

What is the difference between hardware activation and a bundled license?

Hardware activation switches the software on while that mixer is plugged in; disconnect it and the full features go with the mixer. A bundled license gives you software rights tied to your account, which can suit owners who also play on other hardware.

Both routes in this guide include DVS, so the practical difference shows up when you change or share equipment.

Do these mixers also work with other DJ software?

Two do so officially: the DJM-S11 and DJM-S7 also activate rekordbox performance features including DVS control. The rest are Serato-first designs, though several are MIDI mappable, the S11 and ELITE among them, which lets determined users map controls in other programs.

If your library lives in Serato, all six fit; rekordbox users should stay with the Pioneer DJ pair.

Conclusion

Every mixer here states its Serato DVS support in plain words and backs it with a proper battle layout, so the choice comes down to screens, pads, fader feel, and whether control vinyl is in the box. Pick the control style that matches your routine, and the digital vinyl rig will feel like an instrument from the first session.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.