Key takeaways
- Compare the best grill grates for gas grills in cast iron, stainless steel, porcelain-enameled steel, and aluminum panels, with exact sizes and fitments listed.
A worn grate quietly ruins good food, and the best grill grates for gas grills restore the sear your burners still deliver. These six replacement sets cover cast iron, stainless steel, porcelain-enameled steel, and aluminum panels for the most common grill families on patios today. Measure first, then match the material to how you cook.
Quick verdict
Start with cast iron if your old grates are rusted or flaking: the Direct Store DC130 set for Spirit 300 and older Genesis grills, and the Stanbroil set of three for Genesis II 400 models, both restore heavy searing mass at 17.5 and 18.74 inch lengths.
Choose the Weber 7639 stainless set for the lowest upkeep in a Spirit 300, the Hongso PCG525 porcelain-enameled steel set for a light, no-seasoning swap, the Oklagarden cast iron set for Genesis 300 grills, and GrillGrate panels when you want an upgrade surface that fits almost anything.
The 6 best grill grates for gas grills at a glance
Replacement grates are bought by fitment first and material second, so the table below leads with what each set fits and how big it is. Five sets are full replacements matched to named grill families; the sixth is a modular panel system that lays over or replaces grates on many grills.
| Grate set | Material | Size | Fits |
|---|---|---|---|
| Weber 7639 | Stainless steel | Set of 2 | Spirit 300 series |
| Direct Store DC130 | Cast iron | 17.5 x 11.9 in each | Spirit 300, Genesis Silver/Gold/Platinum |
| Stanbroil G024-CS | Cast iron | 18.74 x 11.12 in each, set of 3 | Genesis II and II LX 400 |
| GrillGrate 4-Panel Set | Hard anodized aluminum | 12 x 20.5 in assembled | Universal, gas and more |
| Hongso PCG525 | Porcelain-enameled steel | 17.4 x 11.75 in each | Spirit 300, Genesis Silver B/C |
| Oklagarden Genesis 300 | Cast iron | 19.5 x 12.9 in each | Genesis 300 series |
Notice how much of this market serves one brand’s grill families. That is the reality of replacement parts: grates are model-specific, the makers publish fitment lists rather than universal sizes, and the single most important step in this whole guide is measuring your existing grates before you order anything.
The age of the grills matters too. Several fitment lists here reach back to 2007, which says something good about the gas grill as an appliance: burners, valves, and boxes routinely outlive their grates, and a sound grill with a tired cooking surface is a replacement away from cooking like a much newer machine.
How we selected these grates
Every set here publishes its dimensions, its material, and a fitment list naming the grill models it serves. Sets with vague sizing or unnamed materials were left out. The list favors the grill families most common in backyards, and it includes each major grate material once so the trade-offs are visible side by side.
One of the six is not a replacement at all in the strict sense: the GrillGrate panels can sit on top of sound existing grates as an upgrade surface. It earns its place because many owners searching for grates do not need a replacement; they need a better searing surface, and panels answer that need without a fitment gamble or a parts counter visit.
Weber 7639 Stainless Steel Cooking Grates
The maker’s own answer for Spirit 300 grills is this two-piece stainless steel set, model 7639, backed by a five-year limited warranty. Stainless is the low-upkeep material in this guide: it resists rust in outdoor air, asks for no seasoning, and tolerates a stiff brush without a coating to chip.
- Weber OEM grate set, model 7639, set of 2
- Stainless steel construction
- For Spirit 300 series gas grills
- Five-year limited warranty
- No seasoning required
What stainless gives up is a little of cast iron’s searing weight. Rod grates heat and cool faster than a cast iron slab, so marks are clean but the deep, even crust of iron is harder to repeat on thick cuts. For weeknight cooking, where speed and easy cleanup rule, most owners count that a fair trade.
The OEM route also removes the fitment gamble that comes with third-party parts. A Spirit 300 owner ordering the maker’s own 7639 is matching a part number, not interpreting a compatibility chart, and the five-year warranty is the longest backing attached to any set in this guide.
Buy the 7639 set if your Spirit 300 grates are tired and you want the fit guaranteed and the maintenance minimal. Skip it if searing thick steaks is your main event, because the cast iron sets below carry more thermal mass to the food.
Stainless also forgives the most common grate mistake: leaving the grill uncovered. Rain that starts rust blooming on iron or chipped enamel simply dries on stainless, and a winter outside costs this set far less than any other in the guide. For grills that live outdoors all year, that tolerance is a specification in itself.
Direct Store DC130 Cast Iron Cooking Grates
The DC130 set is the cast iron restoration for the older Weber fleet: two grates at 17.5 by 11.9 inches each, 17.5 by 23.8 inches together, weighing 15.90 pounds in the box. It replaces Weber part 7638 and fits Spirit 300 models from 2007 to 2017 plus Genesis Silver, Gold, and Platinum grills.
- Set of 2 cast iron grates, 17.5 x 11.9 inches each
- Replaces Weber part 7638
- Fits Spirit E/S-310 and S-320 (2007-2017), Spirit 700, Genesis Silver/Gold/Platinum B/C
- 15.90 pounds for the set
- Maker first-use seasoning: heat, cool, oil, heat again
Cast iron is the searing material, and this set’s maker instructions treat it properly: heat the grates to 500 to 600 degrees for ten minutes on first use, let them cool, coat with olive oil, and heat again. That first seasoning is the difference between a grate that releases food and one that grabs it for a season.
The fitment list reaches across two decades of grills, which makes this the set for owners keeping an older Genesis or Spirit alive. The maker also advises brushing with cooking oil occasionally in salt air, a small habit that keeps bare iron from rusting between cooks in coastal climates.
Buy the DC130 if your grill is on the fitment list and its original grates are rusted through or warped. The weight is the honest cost: cast iron is heavy to lift for cleaning, and it wants oil and attention that stainless never asks for.
There is also a fragility note worth respecting: the maker warns that cast iron grids can break if they are dropped or knocked in transit, and the same is true on a patio. Handle the set like the iron cookware it resembles, seat it rather than slam it, and it will outlast several sets of thinner grates over the years ahead for the household that owns and cooks on it every week.
Stanbroil G024-CS Cast Iron Cooking Grates, Set of 3
Genesis II 400 owners get their cast iron option from Stanbroil: three grates at 18.74 by 11.12 inches each, covering 18.74 by 33.36 inches in total. The maker describes a thicker cast iron build that retains heat well, and lists fitment for Genesis II and Genesis II LX 400 series grills.
- Set of 3 cast iron grates, 18.74 x 11.12 inches each
- Fits Genesis II E-410 and S-410, II LX E-440 and S-440, and 435 models
- Thicker cast iron for heat retention
- Maker care: season with high-temperature oil before cooking
- Aftermarket replacement; check dimensions before ordering
Three-piece construction suits a four-burner grill better than two wide slabs. Each section lifts out with one hand for cleaning or for running a partial grate setup, and a single damaged section can be replaced without scrapping the whole surface. The maker is plain that this is an aftermarket part, so the dimension check matters.
The care guidance printed for this set is the full cast iron routine: scrape after each use, brush with oil after each use, keep the grates dry, and cover the grill. Owners who follow it get a surface that improves with age; owners who skip it get rust, which is the standing bargain with every cast iron grate in this guide.
Buy the Stanbroil set if your Genesis II 400 series grates are worn and you want cast iron’s sear with a three-piece layout. Measure your current grates against the 18.74 by 11.12 inch figure first, because 400-series fitment spans several model years.
The maker’s own handling notes add a small, telling detail: the rod ends are rounded so the grates do not hurt your hands. Cast iron sections get lifted often, for cleaning and for charcoal-style rearrangements of the cooking surface, and a set designed to be handled is a set that will actually be maintained.
GrillGrate 4-Panel Set
GrillGrate takes a different route entirely: four interlocking panels of hard anodized aluminum that assemble to a 12 inch deep by 20.5 inch wide surface. The panels are reversible, giving a raised-rail side and a flat side, and the maker says they can sit on top of existing grates or replace factory grates on a gas grill.
- 4 interlocking panels, 12 x 20.5 inches assembled
- Hard anodized aluminum; rust resistant finish
- Reversible: raised rails on one side, flat surface on the other
- GrateTool included
- Sold for gas, charcoal, pellet, and kamado grills
Aluminum behaves nothing like iron. It conducts heat quickly and evenly across the panel, the raised rails concentrate that heat into sear lines, and the valleys between rails catch drippings before they reach the burners. The flat reverse side works as a griddle surface for onions, peppers, and other small food that falls through bars.
Because the panels are modular, fitment is a measurement rather than a model list: if the assembled footprint suits your grate, the set works, and panels can cover part of a large grill as a searing zone while the original grates handle the rest. The included GrateTool lifts food from the rails and doubles as the handling tool for the panels.
Buy the GrillGrate set if your grates are sound but your searing is not, or if you cook on more than one grill and want one surface that moves. Skip it if you want a true like-for-like replacement that restores the grill to its original specification.
The panel format has one more practical virtue: it is the only set here that can be tested cheaply across part of a grill. Cover half the grate, cook the same food on both surfaces side by side, and the difference between rails and bars stops being a claim and becomes something you can see on the plate.
Hongso PCG525 Porcelain-Enameled Steel Grates
The Hongso PCG525 is the light, simple restoration: two porcelain-enameled steel grates at 17.4 by 11.75 inches each, 17.4 by 23.5 inches together, in 18 gauge steel at 1.2 mm thick. It fits Spirit 300 series grills with side control panels, Spirit 700, and Genesis Silver B/C models.
- Set of 2 porcelain-enameled steel grates, 17.4 x 11.75 inches each
- 18 gauge steel, 1.2 mm thickness
- Fits Spirit 300 (side control), Spirit 700, Genesis Silver/Gold/Platinum B/C
- No seasoning needed; preheat and brush before first use
- Model PCG525; not discontinued per the maker listing
Porcelain-enameled steel is what many of these grills carried originally, which makes this set the true like-for-like swap. The enamel gives a non-stick start and keeps the steel from rusting, and the maker’s only first-use instruction is to preheat the grill and brush the grates, with no seasoning step at all.
The trade is mass. At 1.2 mm, this steel sheet carries a fraction of the heat a cast iron grate holds, so searing depends on the burners rather than the grate, and the enamel will chip if it is scraped with metal tools. Treated with a brush and a gentle hand, it is the easiest set here to live with day to day.
Buy the PCG525 if your older Spirit or Genesis Silver needs grates that behave like the originals and your cooking is everyday fare rather than thick-cut searing. It is also the lightest lift in this guide, which matters to owners who remove grates often for cleaning.
One caution belongs with any enameled steel set: the coating is the product, so how you clean decides how long it lasts. A brass or nylon brush while the grate is warm, rather than a steel scraper on a cold grate, keeps the enamel intact, and intact enamel is what separates a five-year set from a one-season set.
Oklagarden Cast Iron Grates for Genesis 300
For the Genesis 300 series, Oklagarden offers the big cast iron set: two reversible grates at 19.5 by 12.9 inches each, 19.5 by 25.8 inches in total, and 16.42 pounds in the box. The set replaces Weber parts 7524 and 7528 and fits the Genesis E, S, EP, CEP, and ESP 310, 320, and 330 models.
- Set of 2 cast iron grates, 19.5 x 12.9 inches each
- Replaces Weber parts 7524 and 7528
- Fits Genesis 300 series E/S/EP/CEP/ESP 310, 320, 330
- Reversible design; thickened cast iron
- 16.42 pounds for the set
The maker publishes a clear seasoning sequence: wash the grates with water and a sponge, dry them, brush with oil, heat at high temperature for 15 minutes to burn off impurities, then clean with a grill brush. Followed once, that routine sets the surface; repeated lightly after cooks, it keeps the iron releasing food.
Reversible grates earn their keep on a grill this size. Run the standard side for everyday cooking and flip to the other profile when a different mark or a flatter contact suits the food. At 19.5 inches long, these are the largest two-piece grates in this guide, matched to the Genesis 300’s wider firebox.
Buy the Oklagarden set if your Genesis 300’s original grates are finished and you want cast iron weight back under your food. As with every aftermarket set here, compare the 19.5 by 12.9 inch measurement with your current grates before ordering.
How to choose grill grates for gas grills
Choosing a grate is mostly an exercise in matching: match the fitment to your grill, the material to your cooking, and the care routine to your habits. The three points below follow that order, because a perfect material in the wrong size is still the wrong grate for your grill.
Fitment and measuring first
Measure the old grates before anything else: length, width, and the total footprint with all pieces laid side by side. Replacement sets are sold against model families and part numbers, and the same grill name can span different grate sizes across years, as the Spirit 300’s front and side control panel variants show.
Part numbers settle arguments. If your manual lists a grate part, such as Weber 7638, 7524, or 7528, shop by that number and the published dimensions together. Every maker in this guide repeats the same instruction in its listing: check the dimension and model of your original parts before you order.
Count the pieces while you measure. Grills in this guide take two-piece sets, a three-piece set, or a four-panel system, and the piece count changes how the surface handles: more pieces mean easier lifting and partial replacement, while fewer, larger pieces mean fewer seams for small food to catch on. Neither is better; they suit different hands.
Material decides the sear
Cast iron holds the most heat and delivers the hardest sear, which is why three of these six sets use it. Stainless steel trades a little searing weight for rust resistance and easy care. Porcelain-enameled steel is the light original-equipment feel, and anodized aluminum panels conduct heat fastest and add a flat side for small food.
Thickness is the figure to compare inside a material. The Hongso steel is 1.2 mm, the Stanbroil set is sold as thicker cast iron, and the DC130 set puts 15.90 pounds of iron across a Spirit grate. More mass means slower preheats and steadier cooking; less mass means a lighter lift and a quicker cool-down.
Care you will actually do
Every material asks for something. Cast iron wants seasoning and oil, and it rusts when it is stored wet. Porcelain enamel wants a brush rather than a metal scraper, because chips expose the steel beneath. Stainless and anodized aluminum ask the least, which is a legitimate reason to choose them.
Be honest about the routine before you buy. A cast iron grate maintained twice a year will look worse in two seasons than a stainless grate ignored entirely. The best grate is the one whose care matches the cook, and this guide includes a low-effort answer in every fitment family for exactly that reason.
Storage habits count too. Makers of the cast iron sets here repeat the same closing advice: keep the grates dry, put the lid back on, and cover the grill. A cover is the cheapest grate accessory there is, and on iron it does more for lifespan than any coating or oil schedule an owner can keep.
FAQ
These answers cover the questions owners ask most when a grate wears out: when to replace, which material, and how seasoning works. Each answer rests on the published details of the six sets above, from the maker’s own stainless set to the aftermarket cast iron options.
When should grill grates for gas grills be replaced?
Replace a grate when the surface is flaking, rusted through, or warped enough to rock on the firebox ledge. Surface rust on cast iron can be scrubbed and re-seasoned, but a porcelain coating that is chipping into food, or bars that have thinned and cracked, mark the end of a grate’s working life and the start of shopping by part number.
Cast iron or stainless steel grates?
Cast iron gives the harder sear and holds heat through a full load of cold food, at the cost of seasoning, oiling, and weight. Stainless steel lights faster, shrugs off weather and neglect, and still marks food well. In this guide the DC130, Stanbroil, and Oklagarden sets make the iron case, while the Weber 7639 makes the stainless one.
Do new grates need seasoning?
Cast iron sets do: the DC130 maker describes a heat, cool, oil, and reheat cycle, and Oklagarden publishes a wash, oil, and 15 minute high-heat routine. Porcelain-enameled steel does not: Hongso states its grates need no seasoning, just a preheat and a brush. Stainless and aluminum panels need no seasoning either.
Conclusion
For most owners, cast iron is the grate to buy: the Direct Store and Stanbroil sets restore real searing mass for Spirit and Genesis II grills. Choose Weber’s stainless 7639 for low upkeep, the Hongso steel set for an easy like-for-like swap, and GrillGrate panels to upgrade any grill. Measure your old grates before you order anything.