Key takeaways
- No gas cooktop with a down vent is sold with six or seven burners. Compare the two five-burner models, KitchenAid KCGD506GSS and JennAir JGD3536GS, on specs.
Shoppers searching for gas cooktops with down vents and 5 7 burners usually expect a row of wide models to choose from. The honest picture is shorter: no six or seven burner gas cooktop with a built-in down vent is sold, and the five-burner end of the current range holds exactly two models, compared here on published specs.
Quick verdict
The KitchenAid KCGD506GSS and the JennAir JGD3536GS are the entire five-burner field. Both are 36 inch gas cooktops with the vent built into the surface and three fan speeds. KitchenAid publishes a 300 CFM exhaust rating, JennAir a 297 CFM Motor Class blower figure, and both headline a 17,000 BTU class high burner.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| KitchenAid 36 inch 5 Burner Gas Downdraft Cooktop KCGD506GSS | 36 inch gas downdraft, 5 burners | Published vent rating and a second strong burner | 300 CFM exhaust rating, 15K BTU second burner | Two burner outputs not stated on the maker page |
| JennAir Euro-Style 36 inch JX3 Gas Downdraft Cooktop JGD3536GS | 36 inch gas downdraft, 5 burners | Burner build and low-heat control | Sealed brass burners, melt cap on the low burner | Full per-burner map not stated on the maker page |
Everything else in this guide flows from that short shelf. The burner-count question is answered first, because it decides whether the search continues at all, and then the two real models get the full treatment: burner figures, vent figures, conversion paths and the limits each maker leaves on its own page. Readers who came in expecting a long list will leave with a short, documented one and the clear reasons behind it.
How we selected
The search behind this guide started wide: gas cooktops with a built-in down vent at five, six and seven burners, across every maker selling built-in gas cooktops. Six and seven burner versions were hunted specifically, by model name and by category, because the keyword asks for that range directly.
Nothing at six or seven burners survived the check. Wide gas cooktops with six burners exist as standard cooktops that need an overhead hood, and separate pop-up vent units exist as their own product type, but no maker page or listing page shows a gas cooktop with six or seven burners and the down vent built into the same unit.
At five burners the field narrows to two distinct models, both 36 inch, both listed below with their full published figures. Finish variants were not counted twice: the JennAir line also comes in black under a second model number, on the same burner and vent platform, so it appears here as one model with two finishes.
Four-burner downdraft models were left out on purpose. The same makers sell 30 inch gas downdraft cooktops with four burners, and those units are covered under their own size keywords in this series. Padding this guide with them would answer a different question than the one asked, so the five-burner field stands at two, honestly counted.
Every figure in this guide comes from a maker or listing page for the exact model: burner output, the vent rating in the maker’s own terms, fan speeds, grate coverage and conversion notes. Figures a page does not state are called out as unstated rather than estimated, since an honest gap serves a buyer better than a borrowed number.
Gas cooktops with down vents and 5 7 burners: the models that exist
Two product sections follow. Each one covers the cooktop as its maker presents it: who it suits, the burner figures actually published, how the vent is rated, what conversion to propane or to duct-free venting involves, and the limits to weigh before a 36 inch unit is ordered for an island or a wall run.
KitchenAid 36 inch 5 Burner Gas Downdraft Cooktop KCGD506GSS
The maker lists this 36 inch cooktop with five burners and a downdraft ventilation system that needs no separate hood. Full-width cast-iron grates cover the surface from edge to edge, so a heavy pot can slide from a strong burner to a gentle one without being lifted across a gap.
Three of the five burners are named with figures on the maker page: a 17K BTU Professional Burner, a 15K BTU Professional Burner and a 5K BTU Even-Heat Simmer Burner. Two burners above 15K BTU is a strong published hand for a downdraft unit, and the simmer burner at the other end carries a melt cap for holding low heat under a small pan.
The vent is published as a 300 CFM exhaust rating with a 3-speed fan control. The maker lists electronic ignition with automatic re-ignition, stainless steel knobs, and an LP conversion kit for households on liquid propane. Conversion to duct-free venting is possible, but the kit for it is listed as not included with the cooktop.
The honest limit sits in the burner table: the maker page states output for three burners and leaves the remaining two unstated. A buyer comparing total cooking power across brands will have to ask the listing page for those two figures, because they are not on the maker page read for this guide.
- Pros: two named burners above 15K BTU; 300 CFM exhaust rating published; full-width cast-iron grates; melt cap on the simmer burner
- Cons: output of two burners not stated on the maker page; duct-free conversion kit not included
Buy if five burners with two strong positions and the stronger published vent figure match how you cook. Skip if your plan needs six burners on one surface, because no downdraft gas model offers them, or if duct-free venting has to work out of the box.
JennAir Euro-Style 36 inch JX3 Gas Downdraft Cooktop JGD3536GS
The maker lists five sealed burners on this 36 inch Euro-Style model, ventilated by the JX3 Downdraft Ventilation System. The burners are brass with a removable base, a build detail aimed at cleaning and at long service on the parts of the cooktop that see direct flame every day.
Published output names the ends of the range: a 17,000 BTU Ultra-High Output Burner and a 5,000 BTU Ultra-Low Output Burner with a Melt Cap. The melt cap spreads the lowest flame under a small pan, which is the setup for melting butter or chocolate and for holding a sauce without a scorched ring at the bottom.
The JX3 vent runs at three speeds, with a 297 CFM Motor Class blower figure on the maker page. Motor Class is the maker’s own measure, so it reads as a close neighbor to the KitchenAid exhaust rating rather than the same measurement. The maker also lists DuraFinish Protection on the stainless steel models in this line.
Conversion paths are published for both fuel and venting: the model family is listed for liquid propane conversion, and duct-free venting is possible with an optional kit. The gap on this page is the middle of the burner range: the opened maker page does not publish a per-burner figure for every one of the five burners, only the high and low anchors.
- Pros: sealed brass burners with removable base; melt cap on the ultra-low burner; DuraFinish Protection on stainless models
- Cons: middle burner outputs not stated on the maker page; duct-free kit is an optional extra
Buy if burner build, sealed surfaces and low-heat control lead your priorities in a five-burner downdraft unit. Skip if you need a published figure for every burner before ordering, or if a sixth burner is a firm requirement rather than a preference.
Buying guide
The buying guide takes the questions this keyword raises in order: why the burner range stops at five in this category, what five burners actually cover in daily cooking, how to read the two vent figures, and the fuel, ducting and cutout checks that decide whether either model fits a given kitchen.
Why the range stops at five burners
A downdraft cooktop carries two machines in one housing: the burner set on top and the vent blower and duct path below the surface. Every extra burner needs room on the surface and gas hardware underneath, while the vent still needs its share of the same cabinet space. That squeeze is why built-in down vents top out where they do.
Standard gas cooktops reach six burners by giving the whole housing to cooking. A downdraft unit gives part of that housing to ventilation, and the makers selling them have settled on four burners at 30 inches and five at 36 inches. The two models in this guide are what that settlement looks like at the wide end.
Width tells the same story from the other side. A 36 inch surface with five burners already runs large pans close together, and the vent slot and its duct take a share of the counter depth behind and below the burners. A sixth burner would need width the standard cabinet run does not offer, or a smaller vent, and no maker has chosen either trade on a listed model.
Shoppers who truly need six burners at once have two honest routes, and neither is a downdraft gas cooktop: a standard six-burner gas cooktop under an overhead hood, or a cooktop paired with a separate pop-up vent unit. Both are different product types with their own guides, and neither should be sold under this keyword’s heading.
What five burners cover in daily cooking
Five burners handle the weeknight load for most households: a stockpot, a wide skillet, a saucepan and a kettle can all sit on heat at once, with a fifth position for the pan that comes off the boil and waits at a simmer. The published layouts support that, with two strong positions on the KitchenAid and a strong anchor burner on the JennAir.
The low end matters as much as the high end. Both models publish a 5,000 BTU burner with a melt cap, which is the position that holds a sauce, melts chocolate or keeps a pan warm without continued cooking. A five-burner surface without a genuine low position would waste its width; these two publish one, and that is part of why they carry the category.
Where five burners pinch is pan size, not count. Two oversized stockpots side by side crowd any 36 inch surface, downdraft or not. Cooks who regularly run two very large pots at full heat are the ones who feel the missing sixth position, and they are the readers the routes in the section above were written for.
Reading the two vent figures honestly
KitchenAid states a 300 CFM exhaust rating for the KCGD506GSS. JennAir states a 297 CFM Motor Class figure for the JGD3536GS. The numbers nearly touch, but the labels differ, and the labels are the information: an exhaust rating and a motor class figure describe blower strength in different terms.
Compare them as the same neighborhood rather than as first and second place. In a real kitchen, duct length, the number of turns in the duct run and the fit of the housing under the counter will move vent performance more than a three-point difference in a published figure ever will.
Both vents run three speeds, and that control is the part you will touch daily. The low speed suits a pan at a bare simmer, the high speed suits a full boil or a hard sear, and the middle setting covers the ordinary middle of cooking. On control and on published strength, the pair are closer than their different vocabularies suggest.
One more vent point belongs in any honest comparison: a downdraft pulls air across the cooking surface at surface level, so it works on the steam and vapor rising from ordinary pans. Very tall stockpots lift their steam higher before it curls toward the vent, which is a layout fact of every downdraft design rather than a fault of either model here. Cooks who live on tall-pot cooking should weigh that shape of the category, not just the figures.
Ducted, duct-free and the space below the counter
The vent in the surface pulls air down into the unit, and from there the plan splits. Ducted venting sends the air outside through ductwork, usually under the floor or through the cabinet run. Duct-free venting filters the air and returns it to the room, for kitchens where no outside run can be built.
Both models here convert to duct-free venting, and on both the conversion kit is separate: not included on the KitchenAid, an optional kit on the JennAir. Confirm the kit and its part number for the exact model when you order, because a downdraft unit installed without its vent path settled is a cooktop waiting on parts.
Below the counter, the vent housing shares space with drawers, cabinet boxes and floor structure. Neither maker page read for this guide publishes a full housing and cutout dimension table, so the install guide for the exact model is required reading before cabinetry is ordered or altered around either unit.
Fuel conversion and ignition details
Both models are gas cooktops first, and households on liquid propane need the conversion question settled at ordering time. KitchenAid lists an LP conversion kit for the KCGD506GSS, and the JennAir line is listed as LP convertible. The conversion itself is installer work involving burner orifices and settings, not a user adjustment.
Ignition on the KitchenAid is electronic with automatic re-ignition listed, which matters on a downdraft surface: the vent draw sits close to the flames, and a low burner can be disturbed by a draft in the room. A system that works to relight a burner that goes out answers that worry in the maker’s own feature list.
Ask the fuel question before the width question. A 36 inch cooktop that arrives set for the wrong gas waits on a kit and an installer, while the same check done at ordering turns conversion into one planned step inside the install visit you were already booking.
FAQ
The questions below are the ones this keyword genuinely raises: whether six and seven burner versions exist anywhere, why the field is so small, what to do if five burners are not enough, and how the fuel and hood questions settle for the two models that do exist.
Do gas cooktops with down vents and 5 7 burners come in six or seven burner versions?
No. A dedicated search of maker and listing pages for six and seven burner gas cooktops with a built-in down vent found none on sale. Wide six-burner gas cooktops exist, but they are standard cooktops that pair with an overhead hood; the down vent built into the surface tops out at five burners in the models makers currently list.
The five-burner end of the range is real, and it is this guide: the KitchenAid KCGD506GSS and the JennAir JGD3536GS. If a listing anywhere shows a six or seven burner gas downdraft unit, the page to trust is the maker’s own, read closely, because roundups have a habit of filing ordinary wide cooktops under downdraft headings.
Why do only two makers sell these cooktops?
Built-in downdraft is a narrow corner of the gas cooktop market. Most gas cooktops are designed around an overhead hood, and the makers who build the vent into the surface are KitchenAid, JennAir and, at 30 inches, GE Profile. At 36 inches with five burners, the field is the two models in this guide and nothing else that pages support.
A small field is not the same as a weak one. Both models publish strong high burners, a genuine low burner with a melt cap and three-speed venting, which is a complete feature set for the kitchens these units are built for: islands and open plans where a hood above the cooktop does not work.
What if five burners are not enough?
The honest options change product type. A standard six-burner gas cooktop under an overhead hood gives the extra position and keeps one-unit cooking. A gas cooktop paired with a separate pop-up vent unit keeps the vent near the surface, with the vent sold and installed as its own appliance behind or beside the cooktop.
What does not exist is a way to stretch the downdraft category itself to six burners. Choosing between the two routes above is a layout decision: hood or pop-up vent, wall run or island. Either route is a sound kitchen; only the expectation that a built-in down vent comes with six burners needs to change.
Can these cooktops run on liquid propane?
Yes, with conversion. KitchenAid lists an LP conversion kit for the KCGD506GSS, and the JennAir JGD3536GS line is listed as LP convertible. Conversion covers the burner orifices and settings for propane and is carried out by the installer as part of fitting the unit, so it belongs in the install plan from the start.
Confirm kit availability for the exact model number on the listing page when you order. Whether a kit ships in the box or as a separate line item varies by listing, and the day of ordering is the cheap moment to find out, not the day the installer is standing in the kitchen.
Do these five-burner models need a hood as well?
No. The downdraft system is the vent plan for both units: KitchenAid states its downdraft ventilation needs no separate hood, and the JennAir JX3 system is likewise built to handle venting from inside the cooktop. Adding a hood above is not part of either maker’s setup for these models.
The vent still needs its air path, ducted outside or run duct-free with the conversion kit covered in the buying guide. Local building rules can have their own say about kitchen venting in a given home, so the installer fitting the unit is the right person to confirm the plan for your address.
Conclusion
The 5 to 7 burner downdraft range resolves to five burners and two models: the KitchenAid KCGD506GSS, with two named high-output burners and a 300 CFM exhaust rating, and the JennAir JGD3536GS, with sealed brass burners and a melt cap. Choose on vent path and which published figures your cooking leans on.