Key takeaways
- Compare six drip pans for grills by exact size and stated fit: Weber foil liners, a stainless Traeger tray, Blackstone cup liners, and an adjustable steel tray.
The right drip pan for grills is a fit question before anything else: the pan has to match the tray, cup, or slot your grill already has. These six options cover foil liners, a stainless catch pan, a pellet grill tray, and an adjustable steel tray, each with its stated dimensions and its full fit list.
How to Choose a Drip Pan for Grills
Start by identifying what your grill uses now: a disposable liner inside a metal catch pan, a cup at the back of a griddle, or a full-width tray under the burners. Then match the replacement to the stated dimensions and the maker’s fit list, because a pan that almost fits still leaks grease past its edges.
Disposable Liners Versus Reusable Trays
Liners trade a small recurring chore for zero scrubbing: drop one in, cook, and discard it with the grease inside. Reusable trays, like the stainless Weber catch pan and the Dozont tray below, ask for washing but last for years. Many grills use both at once, a metal pan underneath and a foil liner inside it.
The honest way to frame the choice is by what wears out. Foil wears out by design, one liner at a time, and the grill’s metal parts stay clean underneath. A reusable tray concentrates all the wear on itself: heat cycles, scraping, and washing slowly thin and stain it until a replacement like the Dozont or the Vencino is needed. Neither route is wrong; they simply place the wear on different parts.
Inside Dimensions Versus Outside Dimensions
Pan sizes are quoted two ways, and the difference decides the fit. Weber states both for its foil liners: 7.5 by 5 inches inside, 8.75 by 6 inches outside. The inside number is the working capacity, while the outside number, rim included, is the one that must match your catch pan. Compare like with like when you measure.
Model Fit Versus Universal Fit
Model-specific pans, like the Napoleon trays and the Dozont, name the grills they fit and reward owners of those grills with an exact match. Universal trays, like the adjustable Vencino, fit by measurement instead: the tray slides to a width range and suits grills whose makers no longer sell the original part.
Both kinds appear in this roundup because both situations are common. A grill still in production usually has a factory pan or liner with a part number, which is the easiest replacement to buy. A grill from a discontinued line or a store brand usually does not, and that is where the tape measure and the adjustable tray take over.
The Six Pans at a Glance
The table below lines up the six pans by type, stated size, and stated fit, so the differences are visible before the detailed reviews. Two are Weber parts for the same grease system, one serves pellet grills, one serves rear-grease griddles, and one adjusts to fit many gas grills.
| Pan | Type | Stated size | Stated fit |
|---|---|---|---|
| Weber Aluminum Drip Pans (6415) | Foil liner, 10-pack | Outside 8.75 x 6 x 1.5 in | Weber Q, Pulse, Lumin, Traveler, Spirit, Genesis |
| Weber Catch Pan and Holder (7515) | Stainless steel pan with holder | 9.1 x 7.3 x 3 in | Most Spirit, Genesis 1000-5500, most Summit |
| Dozont 304 Stainless Steel Drip Pan | Stainless replacement tray | 20 3/4 x 15 5/8 in | Traeger 22 Series and Pro 575, Camp Chef 24 series |
| Blackstone Grease Cup Liners (5017) | Foil cup liner, 10-pack | 8 x 3.75 x 3 in, 27 fl oz | Blackstone 36, 28, and 17 in rear-grease models |
| Napoleon Small Drip Trays (62007) | Aluminum tray, 5-pack | 6 x 5 in | Prestige Pro, Prestige, Rogue, Freestyle |
| Vencino Adjustable Grease Tray (VDXB2430) | Galvanized steel tray | Adjusts 24 to 30 in wide | 4 and 5 burner Dyna-Glo, Nexgrill, Kenmore, and more |
Notice how the sizes cluster. The liner-style pans are all under 9 inches in each direction because they serve a catch pan or cup, while the two full trays run 20 to 30 inches wide because they span the firebox. Your grill’s existing hardware tells you which cluster you are shopping in, and the reviews below start with the smallest pans.
Detailed Reviews of the Six Pans
Each review below sticks to what the maker or listing states: the pan’s dimensions, its material, and the grills it names as fitting. The order runs from the smallest liners to the full-width trays, ending with the adjustable tray built for grills with no factory part.
Weber Aluminum Drip Pans (6415): The Liner for Weber Catch Pans
Weber’s foil liners come ten to a pack and are made to line the grease catch pan of a Weber gas grill with an exact fit. The maker states both measurements: inside dimensions of 7.5 by 5 by 1.25 inches and outside dimensions of 8.75 by 6 by 1.5 inches, the outside figure including the rim that sits on the catch pan.
The stated fit list is long: Weber Q, Pulse, Lumin, Traveler, Spirit, Spirit II, the 2022 Genesis 300 and 400 series, Genesis II 200 and 300 series, and Genesis gas grills, with one clear exclusion, the Summit 6-burner models. The pans are 100 percent recyclable aluminum, Weber advises hand washing them before use and changing them routinely, and the same pans can cook side dishes or carry food to and from the grill. For any Weber owner, this is the default liner to stock.
The two measurements do different work at ordering time. The outside figure, 8.75 by 6 inches, is the one to compare with the rim of your catch pan, while the inside depth of 1.25 inches tells you how much grease a liner holds before it needs changing. A ten-pack suits a normal season of weekend cooking for most households, and because the pans are a Weber part with a Weber number, 6415, reordering the identical liner later is simple.
Weber Catch Pan and Holder (7515): The Reusable Pan under the Liner
This is the metal half of the Weber system: a stainless steel catch pan with its holder bracket, sized 9.1 by 7.3 by 3 inches and listed as rust resistant. Where the foil liner is discarded, this pan is the permanent part that slides under the cookbox and holds the liner, and it is the piece to replace when the original corrodes or goes missing.
The fit statement needs care. Weber builds it for most Spirit, Genesis 1000-5500, Genesis Silver, Gold and Platinum, Platinum I and II, and most Summit gas grills. The exclusions matter as much as the inclusions: it does not fit Spirit models with side-mount control panels made after 2008, front-mounted control panel Spirit models, or the Summit Gold and Platinum 6-burner grills. Check your control panel layout before ordering.
The pan and holder together weigh 1.3 pounds, light enough to slide in and out with one hand when you empty it. In daily use the two Weber parts divide the work: the stainless pan provides the structure and the slide-in mounting, and the foil liner inside it takes the grease, so the steel rarely needs more than a rinse. Replacing a rusted original with this set restores the whole grease path in one step.
Dozont 304 Stainless Steel Drip Pan: The Pellet Grill Tray
Pellet grills use their drip pan as a heat baffle as well as a grease channel, and this replacement is built for both jobs in 304 stainless steel. The listing states the size as 20 3/4 inches long by 15 5/8 inches wide, with 19 3/4 inch folded legs and a 3 inch folded top edge, in thick, sturdy steel.
The fit list covers Traeger 22 Series grills, the Pro 575, and the Lil’ Tex family, replacing Traeger part numbers BCA070, BAC012, and BBQ07C, and it also names the Camp Chef 24 series: SmokePro SG 24, DLX 24, and STX 24, plus Woodwind SG 24, XT 24, Classic 24, and WIFI 24. The seller advises double-checking the dimensions of the old pan before ordering, which is the right habit for any baffle-style tray. The pan weighs 6.49 pounds, a sign of the steel thickness.
On the Camp Chef side, the listing names the underlying model numbers as well, PG24SE, PG24STX, PG24XT, PG24, PG24WWS, and PG24SG-4 among them, which helps owners whose grill badge says Woodwind or SmokePro but whose parts list uses the PG numbers. The listing also describes the steel as resistant to rust and able to withstand higher temperatures without warping, the two failure modes that end the life of the thinner factory trays in pellet grills.
Blackstone Grease Cup Liners (5017): For Rear-Grease Griddles
Blackstone griddles drain grease into a cup at the back, and these foil liners are shaped for that cup. The maker states dimensions of 8 by 3.75 by 3 inches and a capacity of 27 fluid ounces per liner, and the pack holds ten. Blackstone describes the foil as sturdy and thick enough to hold the weight without bending or leaking.
The stated compatibility covers the 36 inch and 28 inch cooking stations, the 17 inch models, the Range Top Combo, and ProSeries models, which together span most rear-grease Blackstone griddles. The liners are 100 percent recyclable aluminum, and the routine is the simplest in this roundup: drop a liner in the cup, cook, and throw the full liner away. Griddle owners who cook bacon and smash burgers often go through grease faster than any other group here.
Capacity is the quiet advantage. At 27 fluid ounces, one liner holds the grease from several full breakfasts before it needs to go, so a ten-pack covers a long stretch of regular griddling. The cup itself still needs an occasional wash, because drips land on its rim as the liner is lifted out, but the heavy scrubbing that a bare cup demands after a fatty cook mostly disappears from the routine.
Napoleon Small Drip Trays (62007): The Rear Tray for Napoleon Grills
Napoleon’s small drip trays come five to a pack and measure 6 by 5 inches in the maker’s US listing, sized for the grease tray position at the back of the grill, where they collect grease and debris that is not burned off during cooking. The trays are 100 percent recyclable aluminum.
Napoleon’s European listings give the same tray in metric, 14.7 by 12.2 centimeters, which is the more precise figure behind the rounded 6 by 5 inches. Either way, the tray is small because the job is small: it sits in the rear grease channel rather than spanning the firebox, so it catches what the cooking surface drains backward. Five trays cover roughly a season at Napoleon’s stated change interval.
Napoleon listings state the fit as Prestige Pro, Prestige, Rogue, and Freestyle barbecues. Napoleon’s own guidance is to check and change the trays every four to six cooking sessions, depending on how much you cook, to rinse them before use, and to recycle them once removed. Like the Weber liners, they can double as small pans for side dishes or food storage when you are preparing food for a gathering.
Vencino Adjustable Grease Tray (VDXB2430): The Universal Steel Tray
When the factory tray has rusted out and the maker no longer sells one, an adjustable tray is the fallback. The Vencino is galvanized steel, weighs 3.76 pounds, and adjusts across a 24 to 30 inch width range to suit 4 and 5 burner gas grills, replacing the original rusty drain pan under the firebox.
Its compatibility lists are organized by brand and model number, covering many 4 and 5 burner models from Dyna-Glo, Nexgrill, Kenmore, Expert Grill, Backyard Grill, Better Homes and Gardens lines, Uniflame, and others. Because the fit is by measurement rather than by a single model, the listing’s advice is the rule: measure the old tray’s width and confirm it falls inside the 24 to 30 inch range before ordering. This is the broadest-fit pan in the roundup.
The lists run deep enough to check a model number directly: Dyna-Glo entries include the DGH450CRP and the DGP483 series, Nexgrill entries include the 720-0830 and 720-0888, Kenmore entries include the 720-0830S and 720-0830A, and Expert Grill entries include the 720-0789 and 720-0968. If your grill’s number appears, the width range still deserves a tape measure check, because the same model family can span two tray widths across its production years.
Matching a Drip Pan for Grills to Your Grill
Match the pan to the grease system first and the brand second. Weber owners have a two-part system, pellet and griddle owners have single-purpose pans, and owners of older or store-brand gas grills usually end up measuring for a universal tray. The three groupings below sort the six pans that way.
For Weber Gas Grill Owners
Stock both Weber parts. The 7515 catch pan and holder is the permanent stainless piece, and the 6415 foil liners line it so the pan itself rarely needs scrubbing. If your catch pan is intact, only the liners are a recurring purchase. Watch the 7515 exclusions on newer Spirit control panel layouts before replacing the metal pan.
For Pellet Grill and Griddle Owners
Pellet owners should treat the drip pan as a wear part with a cooking job: the Dozont stainless tray channels grease and spreads heat, and foil on top of it is optional. Griddle owners have the easiest routine of all, since the Blackstone cup liners turn grease disposal into a single toss after the cup fills.
The two systems fail differently, which decides the spare to keep. A pellet tray fails slowly, by rust and warping over seasons, so one spare on the shelf is enough. A griddle cup liner is consumed at every few cooks, so the spare to keep is a full pack. Napoleon owners sit between the two: their trays are disposable like the cup liners but change on a session count rather than a fill line.
For Off-Brand and Older Gas Grills
Measure first, then shop the universal trays. The Vencino covers 24 to 30 inches of width, which spans most 4 and 5 burner fireboxes from the big store brands. If your old tray is wider or narrower than that range, keep measuring other adjustable trays rather than forcing a fit that leaves a gap at one side.
A gap is not a small flaw in a grease tray. Drippings that miss the tray land on the cabinet floor or the ground under the grill, and they keep landing there at every cook. Five minutes with a tape measure before ordering is what separates a tray that ends the mess from one that merely moves it.
Buying Guide: Measuring Before You Order
Most drip pan returns come from one mistake: ordering by grill brand alone. Makers change tray sizes between generations, and fit lists carry exclusions. The three checks below take two minutes with a tape measure and prevent the wrong pan from arriving.
Measure the Old Pan, Not the Grill
Pull the old pan or liner out and measure it directly: length, width, and depth, rim included for liners. Then compare against the stated size of the replacement, inside dimensions against inside and outside against outside. The Dozont and Vencino listings both give the same advice, because tray openings vary even inside one brand.
Measure twice if the old pan is warped or rusted at the edges, since a bent rim reads wider than the opening it came from. In that case, measure the opening in the grill as well and choose the pan whose stated size sits between the two readings. A tray that drops in with a small, even margin on each side is the fit you want.
Check the Exclusions on the Fit List
Fit lists hide their limits in the fine print. Weber’s liners exclude the Summit 6-burner grills, and its catch pan excludes whole groups of Spirit models by control panel layout and year. Read the exclusion line before the inclusion line; it is shorter and it settles the question faster.
Decide How Often You Want to Handle Grease
Disposable liners move the chore to a quick swap at the maker’s stated interval. Reusable steel pans remove the recurring purchase but add a wash. High-grease cooking, burgers, bacon, and fatty roasts, shortens every interval, so heavy cooks should weigh capacity, like the Blackstone liner’s 27 fluid ounces, when choosing.
Frequently Asked Questions
The questions below cover the points grill owners raise most when replacing a pan: how often liners should change, whether a foil pan can work inside the grill as a cooking drip pan, and how to size a tray for a grill that appears on no fit list at all.
How often should a drip pan for grills be changed?
For disposable liners, follow the maker’s interval where one is stated: Napoleon advises checking and changing its trays every four to six cooking sessions, and Weber advises changing its foil pans routinely. A liner that is full, torn, or coated in old grease should be swapped at once, whatever the count says.
Can a foil liner also work as a cooking drip pan?
Yes, within the maker’s stated uses. Weber notes its foil pans can cook side dishes or transport food, and Napoleon says the same of its trays. Used that way, the pan sits under food on the grate for indirect cooking and catches drippings there, which is a different job from lining the grease catch pan below the firebox.
What size drip pan fits a grill that is on no list?
Measure the old tray and shop by dimension. Adjustable trays like the Vencino cover a stated width range, 24 to 30 inches in its case, and suit many 4 and 5 burner grills. If the old tray is gone, measure the opening it sat in, width and depth, and match a tray that covers the opening without blocking the burner area.
Conclusion
A drip pan for grills is a small part with an exact job: match its stated dimensions to your tray, cup, or firebox, respect the exclusions on the fit list, and pick the material that suits your cleanup habits. Do that, and grease stops being the worst part of owning the grill, and the burners stay cleaner for it.