Updated Nov 16, 2026· 15 min read

Key takeaways

  • Compare six drip pans for Char-Broil grills, from the model-matched G516-6900-W1 catch pan and Performance pans to adjustable trays, with fit checks first.

A worn or rusted drip pan for Char-Broil grills turns every cookout into a cleanup job, so this guide compares six pans and trays that state Char-Broil fit on their own pages: a model-matched catch pan, a Performance pan with foil liners, two adjustable tray kits, and two wide universal trays with the measurements that decide fit.

Quick verdict: which drip pan for Char-Broil grills fits which grill

Start with the two model-matched parts if your grill is on their lists: the G516-6900-W1 catch pan covers a long run of older Char-Broil gas models by part number, and the DcYourHome NX012 pan is built for the Performance and TRU-Infrared lines and ships with foil liners in the box.

Owners of three, four, and five burner Char-Broil grills who need the whole tray rather than the small catch pan should look at the adjustable Grease Tray and Catch Pan Kit, which names hundreds of Char-Broil models, or the GAMPLAE stainless tray, which names eleven. The Pariplus and Outdoor Bazaar trays close the list as measure-first universals: both name Char-Broil in their descriptions, and neither prints a Char-Broil model list, so their fit rests on your tape measure rather than a printed match. Read the fit basis in each entry before the features, because with grease parts the fit claim is the product.

The six drip pans in detail

Each entry below states what the product is, the material and dimensions its own page gives, and the exact basis of its Char-Broil fit claim. Where a listing gives no usable dimension, the entry says so instead of guessing, and where a fit claim is brand-level only, the entry flags that before describing anything else.

DcYourHome NX012 grease collection pan with foil liners

The NX012 is a metal grease collection pan shaped for the Char-Broil Performance family, sold with a ten-pack of aluminum foil drip pan liners that sit inside it. The maker describes high quality metal coated with weather-resistant paint, strong corrosion and wear resistance, and a carrying handle.

Fit is this pan’s strength. The listing names the Performance TRU-Infrared four burner series, including models 463365021, 463331221, 463354021, and 463365522, the wider Performance group around 463347519, 463376117, and 463377117, and the Performance six burner models 463229521 and 463229021. It also names further Char-Broil lines, including the Edge Electric Grill 22652143, the Amplifire Cruise 463258622, and Amplifire models 463341021, 463341421, and 463465022. The maker adds that the pan’s capacity means the foil liner inside needs changing less often. Care follows the maker’s wording: wipe off excess oil with a paper towel or cloth, hand wash with mild detergent, and dry the pan completely with a towel before storing it. One gap matters: the listing prints no credible dimensions for the pan itself, so order by model number match, not by measurement.

G516-6900-W1 grease tray catch pan

The G516-6900-W1 is the small catch pan that sits at the end of the grease path on a long list of Char-Broil gas grills, sold as an aftermarket part under the maker’s own part number. The seller lists its dimensions as 10-7/8 x 5-3/4 inches and the package as one grease tray catch pan.

Its fit list is the longest in this guide relative to its size: Char-Broil models including 463268806, 466231711, 463232011, 463244011, 463243911, 463257111, 463247512, 463212511, 463262211, 463434413, 463241313, 463270912, 463271312, 463210011, 463215512, 463224912, 463231711, 463251512, 463267113, 463270913, 463271913, 463449914, and 463273614, among many more. That breadth reflects how many Char-Broil generations shared this cup size. The seller describes the part plainly as a quality aftermarket part rather than a genuine factory piece, which is the honest framing for most parts sold under a maker’s number. If your tray is intact but the cup under the drain hole is rusted, cracked, or missing, this is the part that restores the system without touching the tray above it, and the model list gives an unusually firm check before ordering.

Adjustable Grease Tray and Catch Pan Kit, 23.6 to 31.6 inches

This kit replaces the full grease tray and its catch pan together on Char-Broil three, four, and five burner gas grills. The seller gives an adjustable length of 23.6 to 31.6 inches, a width of 15.04 inches, and a package of one grease tray and one catch pan in heavy duty metal.

The seller describes that metal as long-lasting and heat resistant, and installation as a matter of adjusting the length to the grill and fixing the screw holes on both sides. The fit list runs to hundreds of Char-Broil models, including Performance grills such as 463347519, 463376117, 463377117, and 463365021, Commercial and Classic models such as 463268008, 463243518, 463243519, and 463432215, and older lines down to 463241313 and 463241314. A list that long should still be checked rather than trusted at a glance: find your exact model number in it, then confirm the tray opening on your grill falls inside the 23.6 to 31.6 inch adjustment range and the 15.04 inch width. When both checks pass, this kit is the most complete renewal here, because it replaces the two parts that rust together as a matched pair.

GAMPLAE adjustable grease tray in 430 stainless steel

The GAMPLAE tray is a full-width replacement grease tray with its own catch pan, built from grade 430 stainless steel. The maker gives an adjustable length between 25 and 34 inches, a fixed width of 15.5 inches, a catch pan of 7.9 x 4.9 x 0.9 inches, and a tray weight of 4.9 pounds.

Its Char-Broil fit list is short but specific: models 463230710, 463230510, 466221311, 463230512, 463230511, 463221311, 463230112, 463230513, 463234511, 463234512, and 463234513. Eleven models is a narrow promise next to the kit above, yet a narrow printed list is easier to trust than a broad one, and the stainless construction suits owners whose original tray failed by rust in a damp climate or under a cover that traps moisture. The maker notes the tray needs assembly and that its protective film should be removed before use, and says the tray keeps grease and liquids from falling directly onto the ground or the surface beneath the grill. The catch pan’s stated depth of 0.9 inches is shallow, so fatty cooks will fill it faster than a deep cup; the maker answers that the pan’s capacity means grease does not need pouring off often, but the measurement argues for checking it after every long cook anyway.

Pariplus universal grease tray with catch pan

The Pariplus tray is a universal adjustable grease tray in galvanized metal, with an adjustable width of 24 to 30 inches. The package holds a middle sheet, two side sheets, two brackets, a grease cup, and twelve screws and nuts, and assembly needs a Phillips screwdriver, which is not included.

The maker says installation takes five minutes or less and warns that edges can be sharp, so gloves belong in the job, and its description adds that the included catch pan collects grease and oil and reduces flare-up risk. Its Char-Broil standing needs an honest sentence: the listing’s description names Charbroil among the brands the tray suits, yet its model-by-model compatibility list, which runs long for several other brands, prints no Char-Broil model numbers at all. That makes this a measurement purchase for a Char-Broil owner: if your grill’s tray opening falls inside the 24 to 30 inch span and the bracket layout clears your frame, the galvanized build and the complete hardware pack are sensible. If you want a printed model match, the three products above give one and this one does not.

Outdoor Bazaar GTray33 replacement grease tray

The GTray33 is the widest tray here, a two-piece steel grease tray that adjusts from 30 to 33 inches in length with a fixed depth of 14.5 inches, aimed at five and six burner grills. The maker states 0.8 gauge steel and a product weight of 5.33 pounds in its information table.

The package holds the two-piece tray, a custom grease cup, an instruction manual, and the hardware, with assembly stated at under five minutes and a downward slope that channels grease and drippings toward the drain hole and into the cup. The maker claims the gauge surpasses standard factory trays in sturdiness, which is a maker’s comparison rather than a measured fact. Its Char-Broil standing matches the Pariplus pattern: the listing’s title names Charbroil among the brands the tray serves, while its compatibility section lists brands in general terms without Char-Broil model numbers. For a big Char-Broil six burner whose tray opening measures inside the 30 to 33 inch span, the slope and the two-piece build are practical; for anything smaller, the span does not close down far enough. The buying rule is the maker’s own: measure the size of your original drip tray before ordering.

How a drip pan for Char-Broil grills is built

Char-Broil grease systems share one layout across most of the gas range: drippings fall past the cooking grates onto a wide tray under the burners, the tray slopes toward a drain hole, and a small catch pan under that hole holds the grease until it is emptied after cooking.

Model-matched pans versus adjustable trays

A model-matched part like the G516-6900-W1 or the NX012 is stamped for a known opening, so fit is a lookup: find your model number on the list and the geometry follows. An adjustable tray replaces the lookup with a range, sliding or bolting to the width of your grill frame.

That range suits grills whose exact tray is discontinued or shared across brands, and it is why four of the six products here adjust rather than match. The trade is certainty against availability: matched parts fit or do not, while adjustable trays fit many grills approximately and reward careful measuring. Neither approach is better in the abstract; the right one is the one whose evidence, a printed model list or a measured range, you can actually check against the grill standing in front of you.

Tray, catch pan, and foil liner: three layers

The tray is the structural layer and the part that rusts through; the catch pan is the removable cup that holds grease at the drain; the foil liner is a disposable skin that keeps either one cleaner during a cook. Each product above replaces a different combination of those layers.

The NX012 bundles pan and liners, the two kits pair tray and catch pan, the GAMPLAE pairs a stainless tray with its own shallow cup, and the G516-6900-W1 replaces the cup alone. Replacing only the failed layer costs less and disturbs less. Replacing tray and cup together makes sense when both show rust, since the second failure usually follows the first within a season or two of cooks, and a matched kit also settles the question of whether an old cup will sit correctly under a new tray’s drain hole.

Materials: stainless, galvanized, and coated steel

The GAMPLAE tray’s grade 430 stainless steel resists the rust that kills plain steel trays, which is why it suits damp storage. Galvanized metal, used by the Pariplus tray, carries a zinc coating over a steel core, and painted steel, as on the NX012, depends on its coating staying intact.

None of these materials changes how the tray works on day one; they change how the tray looks in year three, and how often this purchase repeats. A scraper dragged across a coated or galvanized surface breaks the layer that protects the steel under it, and rust starts at the break. Stainless shrugs off the same scraping, which is part of what its price buys. Storage matters as much as material: any of these trays left holding grease and rainwater through a winter will corrode faster than the same tray emptied, dried, and covered.

Measure before you order

Every return in this category starts with a number that was never taken. Two minutes with the grill’s model plate and a tape measure settle which of the six products above can fit, and the checks below follow the order the listings use: model number first, dimensions second, claim type last.

Find the model number first

Char-Broil model numbers are long strings such as 463347519 or 463241313, printed on the grill’s rating label, and they are the key to every matched list in this guide. A series name alone is not enough, because each series spans many tray designs across its production years.

Copy the full number, check it character by character against the fit lists above, and only then look at dimensions. A model match on a printed list is the strongest fit evidence any of these pages offers, stronger than a photograph that looks right or a series name that sounds right. If the number is worn off the label, the grill’s manual prints it too, and the seller of the G516-6900-W1 cup offers a model finder for owners who do not know theirs. Guessing from a similar-looking model is how the wrong tray arrives: two grills can share a lid and a badge while taking different pans underneath.

Length, width, and slide direction

For adjustable trays, measure the opening the tray must cover: length across the grill, width or depth front to back, and the room below for the catch pan. Then compare those numbers against the stated ranges printed in each entry above, not against the tray you hope will fit.

The ranges are 23.6 to 31.6 inches by 15.04 inches for the kit, 25 to 34 by 15.5 inches for the GAMPLAE, 24 to 30 inches of width for the Pariplus, and 30 to 33 by 14.5 inches for the GTray33. Note also how your current tray mounts, whether it slides on rails or hangs from the frame, since a tray that covers the opening but cannot mount still does not fit. Check the cup as well: its depth decides how much grease it holds, and its position has to sit under the tray’s drain hole, not beside it, or the grease path ends on the cabinet floor.

When the listing names no Char-Broil models

Two of the six listings name Char-Broil only at brand level. That is not a reason to dismiss them, since wide universal trays genuinely serve many grills, but it changes the evidence: fit rests on your measurements and on the adjustment range covering your opening.

Measure twice, keep the stated range’s limits in mind rather than its middle, and prefer a tray whose range brackets your opening comfortably instead of one your grill barely reaches at full extension. A tray at the very end of its range has the least overlap at its joints and the least stiffness across its span. If your opening falls near a range limit, the neighboring product with a wider span is usually the calmer purchase, even when the first tray’s materials or hardware look better on paper.

Care that keeps grease moving

A new tray fails the same way the old one did if grease sits in it. The habits below come from the care wording on the opened pages and from the design of the parts themselves: shallow cups fill fast, coatings chip under metal scrapers, and standing grease corrodes any tray left full.

Empty the catch pan on schedule

The catch pan is small by design: the GAMPLAE cup measures 7.9 x 4.9 x 0.9 inches, and the G516-6900-W1 pan spans 10-7/8 x 5-3/4 inches, so a single fatty cook can fill either one to the top. Empty the cup after long cooks and before it brims over the rim.

An overflowing cup puts grease on the cabinet floor and the ground below, which is the mess the whole system exists to contain. Solidified grease lifts out in one piece on a cold morning, which makes the day after a cook the easiest moment for the job. The NX012’s maker gives the same rhythm in its care wording: wipe off excess oil, wash, and dry completely before storing. A cup emptied on schedule also tells you how your grill is behaving; a sudden rise in grease volume or a cup that stays empty can each point at a tray or drain problem worth finding early.

Liners, scraping, and washing

Foil liners like the ten-pack bundled with the NX012 turn tray cleaning into a lift-and-discard job and keep the tray’s coating away from scrapers. When you do wash a pan, follow the NX012 maker’s wording: wipe off excess oil first, hand wash with mild detergent, and dry it fully.

Drying completely before storing is the step the maker repeats, and it matters because a pan put away damp rusts from the inside out, under a cover, unseen until the next season. Scrape with plastic rather than steel on coated and galvanized surfaces, and let stainless take the firmer scrub its surface allows. Keep the drain hole clear while you clean; a hole bridged by foil or blocked by a lump of old grease turns the tray into a shallow pan of standing fat, which is the condition every part in this guide is designed to avoid.

Questions owners ask

Three questions cover most of the hesitation around this purchase: whether one pan can serve the whole brand, whether foil can substitute for a failed tray, and how often the little cup under the drain really needs attention during a grilling season at home.

Does one drip pan for Char-Broil grills fit every model?

No single pan here claims every model, and the fit lists show why: the G516-6900-W1 cup covers the models that share its 10-7/8 x 5-3/4 inch size, the NX012 covers the Performance family it names, and the adjustable trays cover measurement ranges rather than model lists.

Char-Broil has sold many tray designs under the same series names, so the model number, not the badge on the lid, decides the match every time. The breadth of the kit’s list and the cup’s list can make coverage look universal, but both lists are printed precisely because coverage is not universal. If your model appears on a list, you have a match; if it does not, no amount of series similarity upgrades the guess into one.

Can foil replace a rusted tray?

Foil is a liner, not a structure. A foil sheet laid over a tray that has rusted through will sag into the hole, tear at the edges, and drop hot grease onto the burners and the cabinet floor below, which is worse than the rust it was meant to cover in the first place.

Liners earn their place over a sound tray, as the NX012 bundle uses them, keeping the metal clean so it lasts longer between washings. Once the tray itself is holed or warped, the repair is a replacement tray or kit from the lists above, measured and matched before ordering. The same logic applies to a cracked catch pan: foil inside a cracked cup buys a cook or two at most, while the G516-6900-W1 cup replaces the part outright for the models on its list.

How often should the catch pan be emptied?

Empty it by fullness rather than by the calendar, every time. The cups in this guide are shallow, the GAMPLAE at 0.9 inches deep, so check the cup after every long or fatty cook and empty it before grease reaches the rim and starts to spill over the sides.

In a heavy grilling season that can mean weekly attention; in a quiet month, a glance before each cook suffices. The check takes seconds while the grill heats, and it is the whole maintenance cost of the system working as designed. Owners who line the cup or the tray with foil, as the NX012 bundle allows, can stretch the scrubbing interval, but the emptying interval follows the grease, not the liner: a full cup is full, lined or not.

Match the part to the failure: a rusted cup takes the G516-6900-W1, a Performance pan with liners takes the NX012, and a failed tray takes one of the measured kits. Check the model number first, the tape measure second, and the new drip pan for Char-Broil grills will drop into the grease path and get out of the way of dinner.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.