Key takeaways
- Compare the best DJ mixers for scratching by crossfader design and adjustment, pad layout, effects engines, DVS support, inputs, outputs, size, and weight.
Scratching is a fader sport before it is anything else, and the best dj mixers for scratching are built around that fact: a crossfader that cuts where your fingers expect, channel faders that survive years of hard use, pads close to the action, and effects you can fire without looking down at a laptop screen.
The five mixers in this guide are all two-channel battle designs, but they split into clear camps. Pioneer DJ’s DJM-S11 and DJM-S7 use the MAGVEL FADER PRO with curve, reverse, and feeling adjustments. Rane’s Seventy runs three contactless MAG FOUR faders with an external tension control. The Numark Scratch keeps the formula simpler with an InnoFADER crossfader, paddle effect triggers, and Serato DJ Pro with DVS in the box. Every specification below comes from the maker’s published material for that model.
What scratching asks from a DJ mixer
A scratch mixer lives or dies by its crossfader: how the curve is shaped, how much dead space sits at each end, and whether the feel can be adjusted. Beyond the fader, the layout matters just as much, because pads, effect triggers, and loop controls have to sit where your hands already are during a routine.
The crossfader: type, curve, and adjustment
The crossfader on a scratch mixer is described by its maker in terms of construction and adjustment rather than a single cut distance. Magnetic designs dominate this guide: Pioneer’s MAGVEL FADER PRO appears on both of its mixers here with an assignable curve, a reverse switch, and a feeling adjustment.
Rane’s MAG FOUR faders are contactless and tension-adjustable from an external control, and the same fader design serves all three fader positions. Numark’s InnoFADER offers reverse and slope control. What matters when comparing is which adjustments the maker actually provides: curve shape, reverse, tension or feeling, and whether the channel faders get the same treatment as the crossfader.
Cut-in adjustment, offered on the Seventy-Two MKII, trims the dead space at the fader’s ends directly; on mixers without it, the curve setting does most of that work.
Channel faders, EQ, and filters
Scratch routines use the channel faders and EQ as musical tools, cutting bass or swapping channels mid-phrase. The two Pioneer mixers here carry three-band EQ that doubles as an isolator, with ranges that reach full cut, plus a per-channel filter knob and Sound Color FX.
The Rane Seventy’s channel faders are the same MAG FOUR units as its crossfader, so the feel stays consistent across the panel. The Numark Scratch keeps channel control simpler with filter knobs on each channel. Check how the EQ behaves at its extremes and whether the filter sits per channel, because those details shape how a routine sounds.
Isolator-style EQ matters for scratching because a full cut on the bass lets a kick pattern from one deck sit under a scratch from the other without buildup. Where the EQ only reaches a deep reduction rather than full cut, the same move leaves a residue of the band in the mix, which is why the stated range belongs on the comparison list.
Pads, effects, and software control
Performance pads fire hot cues, samples, and scratch banks, and every mixer here puts eight pads per deck within reach, except the Numark with four per deck. Independent pad modes per channel let one deck run cues while the other triggers samples at the same time.
Effects divide into built-in engines, like Rane’s Flex FX and Pioneer’s 22 Beat FX, and software effects controlled from the panel. All five mixers work with Serato DJ Pro and DVS control vinyl, and the two Pioneers also work with rekordbox. Dual USB ports appear on the flagships so two laptops can connect for handoffs between DJs.
Latency matters as well: DVS control depends on the sound card path, and the two Pioneer mixers run 24-bit conversion at 48 kHz, the same rate the Numark specifies for its USB audio.
The five dj mixers for scratching in detail
Each mixer below is presented with the fader system its maker specifies, the pad and effects layout, and the connections a turntablist actually uses. The order follows the depth of the scratch feature set, from the most elaborate battle panels to the most direct one.
Pioneer DJ DJM-S11
The DJM-S11 is Pioneer’s professional two-channel, four-deck control battle mixer, built to run Serato DJ Pro or rekordbox with DVS control of turntables or CDJs. Its 4.3-inch customizable touch display shows waveforms and playback positions and works as a Touch FX surface, so effects can be shaped with a finger instead of a knob.
The crossfader is the enhanced MAGVEL FADER PRO. Pioneer says it boosted the fader’s vertical rigidity by 30 percent and added a tougher coating around the crossfader area to reduce wear. The curve is assignable, a reverse crossfader function is included, and a feeling adjustment sets the fader’s weight. Fader bumpers are in the box. The channel EQ is three-band with isolator behavior reaching full cut, and Sound Color FX offer Filter, Dub Echo, Noise, Pitch, and Wide Filter per channel.
Eight larger Performance Pads sit per deck. Combo Pad mode combines up to four pad modes at once in Serato DJ Pro, and Scratch Bank loads scratch samples assigned in the software from a single tap. The mixer carries 22 Beat FX including Fader Pitch and Helix, and Smooth Echo can engage automatically when you move a fader or hit an assigned pad. Audio runs through 64-bit mixing and dithering processing with a 32-bit converter on the master output, and the maker rates signal-to-noise at 115 dB over USB and 90 dB on the phono inputs. Connections include two line and two phono RCA inputs, a combo mic input, an aux input, balanced master outputs, a booth output, two headphone outputs, and both dual USB-A hub ports and dual USB-B ports for two computers. The unit measures 10.51 by 4.25 by 17.8 inches and weighs 11.46 pounds.
The dual USB-A ports form a hub, so controllers and other devices plug into the mixer instead of the laptop, and Touch MIDI lets the screen drive software functions directly. For a battle rig with two turntables, two laptops, and a controller, that hub keeps the wiring in one place.
Because the mixer controls four decks from two channel strips, a routine can park a scratch sample or an acapella on a spare deck and bring it in from the pads without touching the playing channels.
Rane Seventy
The Rane Seventy is a two-channel Serato battle mixer built from solid steel with a front guard handle, aimed at competition DJs. Its headline feature is a set of three contactless MAG FOUR faders covering both channel faders and the crossfader, which Rane describes as 50 percent lighter than their predecessors for tighter, faster cuts.
An external crossfader tension-adjust control lets the player set the resistance directly, and because all three faders share the design, the channel faders feel like the crossfader. Effects run through six dual post-fader internal Flex FX engines, with radio-style buttons giving instant access to Flex FX and Serato’s software effects, and dual diecast aluminum FX paddles that rotate 180 degrees fire them.
Sixteen Akai Professional MPC performance pads, eight per deck, work with independent mode control per deck across Hot Cue, Pitch ‘n Time, Saved Loops, Sampler, Roll, and Transport functions. Instant Double buttons can toggle Sync on and off or act as Silent Cue, and there are dedicated loop controls, a connection hub for the Rane Twelve controller, and dual microphone inputs. Dual USB connections support DJ handoffs, and Rane rates the signal-to-noise at 114 dB.
Browse and track select controls sit on the panel for loading without reaching for the laptop, and the dedicated loop sections mirror the pad layout, so loops, cues, and doubles all live in the same reach zone during a routine.
Rane Seventy-Two MKII
The Seventy-Two MKII is Rane’s flagship two-channel battle mixer for Serato DJ Pro, adding a full color touchscreen and the deepest fader adjustment set in this guide to the same MAG FOUR fader family as the Seventy. The casing mixes solid steel and aluminum, and the layout was designed with working turntablists.
Its three MAG FOUR faders offer reverse, contour, and cut-in adjustment, and the crossfader tension can be set from both external and internal controls, the widest range of fader tuning here. The 4.3-inch color touchscreen relays Serato’s moving waveforms and handles track selection, effect control, and user customization, so the laptop can stay closed during a routine.
Two Flex FX engines, one per channel, stack with Serato’s software effects, and sixteen Akai MPC-style pads with RGB backlight run independent mode controls per deck. Toggle controls switch the Instant Double, Silent Cue, and Sync functions. Dual DVS inputs accept aux or phono/CD sources, two microphone inputs use combo connectors with on/off, tone, and mic/line switches, and the outputs include session RCA connections, a balanced XLR main output, and a balanced booth output. USB controller inputs accept the Rane Twelve, dual USB ports handle handoffs, and the box includes the Serato DJ Pro DVS license, Pitch ‘n Time, and Serato DVS vinyl.
Pioneer DJ DJM-S7
The DJM-S7 takes the DJM-S11’s battle layout and trims it into a smaller, lighter two-channel mixer that enables free use of Serato DJ Pro and rekordbox, with DVS control in both applications. It keeps the same MAGVEL FADER PRO, with the knob mounting shaft’s vertical rigidity boosted by 30 percent over the earlier design.
Fader adjustment is hands-on: a Feeling Adjust knob sets the crossfader’s weight, a Curve knob sets the crossfader curve, and separate knobs set each channel fader’s curve. Eight large Performance Pads per channel run independent pad modes, so one channel can fire Hot Cues while the other works the Sampler, and Combo Pad mode plus the Scratch Bank mode from the flagship are both present.
All 22 built-in Beat FX from the DJM-S11 are included, worked through large effect levers with an OLED display showing the effect name and beat value, and Loop MIDI can send repeated MIDI commands to the software in a set beat cycle. The S7 adds a Bluetooth input, version 5.0 with SBC, AAC, aptX, and aptX Low Latency codecs and a range of about 10 meters, which can feed the master output or either channel for phone audio, loops to scratch over, or a backup source. Connections mirror the flagship: two line and two phono inputs, a combo mic input, an aux input, balanced and RCA master outputs, a booth output, two headphone outputs, and dual USB-A hub and USB-B ports. The maker rates signal-to-noise at 110 dB over USB and 88 dB on phono. It measures 10.51 by 4.25 by 15.65 inches and weighs 9.92 pounds.
Loop MIDI deserves a closer look: it repeatedly sends a MIDI signal to the software in a set beat cycle, with functions like Hot Cue, sampler, and key shift preassigned, so a snare loop can tighten its cycle automatically during a buildup. Six FX Select buttons hold the assigned effects, and a signal ground terminal on the back takes the turntable ground wire.
Numark Scratch
The Numark Scratch is a 24-bit two-channel scratch mixer with an all-metal chassis and a direct layout. Its crossfader is an InnoFADER with reverse and slope control, the two adjustments a scratch DJ reaches for most, and the audio path runs 24-bit conversion at 48 kHz over a USB 2.0 connection with 32-bit fixed-point DSP.
Four performance pads per deck cover cues, rolls, and samples, and effects are fired from six quick launch triggers with dual paddle launch triggers and a Dry/Wet control; the software effects set includes Echo, Delay, Flanger, Reverb, V. Echo, and Phaser. Dedicated instant looping knobs handle loops without menu work, and filter knobs sit on each channel.
Each channel has phono and line inputs for turntables or media players, and Serato DJ Pro with a DVS license is included, so control vinyl works out of the box. A combo mic input offers level and tone control, the cueing system drives dual headphone outputs in both jack sizes, and outputs include an XLR main output and a separate booth output. The mixer measures 12.05 by 9.61 by 3.32 inches and runs on an internal auto-switching power supply.
The internal power supply auto-switches between 100 and 240 volts, and the booth output runs unbalanced alongside the balanced XLR mains. With the DVS license included rather than sold as an add-on, the mixer is ready for control vinyl as soon as the software is installed.
Comparing dj mixers for scratching side by side
With all five designs verified, the table below lines up the fader system, pads, and software path for each mixer. Read it for the adjustment style you prefer, then confirm the details in the product sections above before deciding. The adjustment column shows the difference in philosophy most clearly.
| Mixer | Crossfader | Crossfader adjustment | Pads | Software |
|---|---|---|---|---|
| Pioneer DJ DJM-S11 | MAGVEL FADER PRO | Curve assignable, reverse, feeling adjustment | 8 per deck | Serato DJ Pro and rekordbox, DVS |
| Rane Seventy | MAG FOUR contactless (all 3 faders) | External tension-adjust control | 16 MPC pads, 8 per deck | Serato DJ Pro, DVS |
| Rane Seventy-Two MKII | MAG FOUR (all 3 faders) | Reverse, contour, cut-in; external and internal tension adjust | 16 MPC-style pads, 8 per deck | Serato DJ Pro, DVS license and vinyl included |
| Pioneer DJ DJM-S7 | MAGVEL FADER PRO | Curve knob, feeling adjust knob, channel curve knobs | 8 per channel | Serato DJ Pro and rekordbox, DVS, Bluetooth input |
| Numark Scratch | InnoFADER | Reverse and slope control | 4 per deck | Serato DJ Pro with DVS included |
Two fader philosophies
The Pioneer and Rane mixers adjust fader feel electronically and mechanically around magnetic faders: curve assignment, reverse, and a weight or tension control. Rane extends the same contactless fader to the channel positions, while Pioneer concentrates the flagship fader in the crossfader slot.
Pioneer adds curve knobs for the channels on the S7. The Numark’s InnoFADER is a specialist scratch crossfader with slope and reverse control, a simpler panel with fewer settings to manage. None of the makers here publish a cut-in distance, so choose by the adjustments offered and the fader’s stated construction rather than by a number.
Feel is personal, and the settings interact: a sharper curve with a light fader weight cuts differently from the same curve with more tension. The mixers that expose more of these controls reward experimentation in practice sessions, while the simpler panels trade that tuning range for a setup that never drifts.
Screens, levers, paddles, and pads
The DJM-S11’s touch display is the only full screen here, and it doubles as an effects surface. The DJM-S7 swaps the screen for large effect levers and a small OLED readout. The Rane Seventy uses rotating aluminum paddles for its Flex FX, and the Numark uses dual paddle triggers for its software effects.
Pad counts run from four per deck on the Numark to eight per deck on the others, and the Seventy-Two MKII’s pads add RGB backlight. For routines built on pad drumming, the eight-pad layouts give more room; for pure fader work, the simpler panels stay out of the way.
The Seventy-Two MKII splits the difference, pairing its touchscreen with physical Flex FX controls, so effects can be stacked from the screen while the faders stay in hand.
Choosing among dj mixers for scratching
The right pick depends on how you perform: competition routines reward the deepest pad and effects sections, DVS turntablists live on the crossfader and the phono inputs, and a practice setup values a direct panel that stays consistent while technique develops.
Competition and routine DJs
Routines that mix scratching with pad work and effects point to the DJM-S11 or the Rane Seventy pair. The S11 brings the touch display, Scratch Bank, Combo Pad mode, and the widest effects list, while the Seventy answers with three matching MAG FOUR faders, Flex FX paddles, and MPC pads with independent modes per deck.
The Seventy-Two MKII adds the touchscreen and cut-in adjustment. Both brands connect two laptops for back-to-back sets and changeovers.
DVS turntablists
Every mixer here enables or includes DVS, so the choice turns on the fader and the phono stage. The DJM-S7 keeps the flagship crossfader and adds curve knobs for the channel faders in a lighter body, and its Bluetooth input can feed a channel with loops to scratch over.
The Numark Scratch includes the Serato DJ Pro DVS license in the box and keeps the panel focused on the InnoFADER, pads, and loop knobs. On the Rane pair, dual DVS inputs and dual USB ports suit two-rig changeovers.
Practice and home setups
For daily practice, consistency matters more than features: a fader whose curve and feel you can set once and trust every time you sit down to play. The Numark Scratch covers that ground with slope and reverse control on a proven crossfader design and an all-metal chassis.
The DJM-S7 adds the feeling and curve knobs plus Bluetooth for playing along with phone audio, which suits a home rig that doubles as an entertainment setup. Its Bluetooth input also plays loops from a phone to scratch over, which turns any phone into a practice partner.
Setup checks before a battle or session
A few minutes of checks before a set protect the performance: confirm the fader settings are where your hands expect them, test the DVS signal on both decks, and play one familiar routine to confirm the whole chain behaves before the room fills. Keep a spare control vinyl and a backup cable in the same kit.
Fader calibration and curve checks
Set the crossfader curve for scratching and run a series of slow fades and sharp cuts on both sides to confirm the cut points match. Check the reverse switch position if you play hamster style, set the feeling or tension control to your usual weight, and repeat the check on the channel faders.
On mixers with curve knobs per channel, confirm both channels match. Wipe the fader area clean, since dust around the slot changes how a run feels mid-routine. Photograph the panel once the settings feel right; a borrowed or reset rig can then be put back in seconds.
DVS and audio checks
Play control vinyl on both decks and confirm the software tracks position and direction correctly, then switch to real vinyl through the phono inputs to check grounding and hum. Set channel gains so peaks stay below the meter’s top, test both headphone outputs, and confirm the booth and master outputs feed the right destinations.
If a second laptop is part of the night, connect it through the spare USB port and hand over once before doors.
Conclusion
Scratch mixers are decided by the crossfader first. The DJM-S11 and the Rane Seventy pair offer the deepest battle panels, the DJM-S7 keeps the flagship fader in a lighter body, and the Numark Scratch covers the essentials with a proven crossfader and DVS included. Match the fader adjustments to your hands, and the rest of the panel will follow.