Key takeaways
- Five gas cooktops with downdraft state vent strength three different ways. Compare the GE 400 CFM rating, KitchenAid 300 CFM and JennAir Motor Class figures.
Every model among gas cooktops with downdraft is really two appliances sharing one cutout, and this guide grades the second one: the vent. Five models are sold, and their makers state vent strength as an exhaust rating, a Motor Class figure and a CFM number with a noise rating, compared here on those terms.
Quick verdict
On published vent figures alone, the GE Profile PGP9830DRBB leads the field with a downdraft exhaust rated 400 CFM and 7.0 sones at high speed. The two KitchenAid models follow with a 300 CFM exhaust rating each. The JennAir pair state Motor Class figures, 297 on the maker page and 297 or 310 across one listing’s two tables.
| Product | Vent system | Published figure | Fan speeds | Main limit |
|---|---|---|---|---|
| GE Profile 30 inch Built-In Gas Downdraft Cooktop PGP9830DRBB | Downdraft exhaust, variable speed fan | 400 CFM, 7.0 sones at high speed | 3 | Burner outputs top out at 11,500 BTU |
| KitchenAid 36 inch 5 Burner Gas Downdraft Cooktop KCGD506GSS | Downdraft ventilation | 300 CFM exhaust rating | 3 | No noise figure published |
| KitchenAid 30 inch 4 Burner Gas Downdraft Cooktop KCGD500GSS | Downdraft ventilation | 300 CFM exhaust rating | 3 | No noise figure published |
| JennAir 30 inch JX3 Gas Downdraft Cooktop JGD3430GS | JX3 downdraft system | 310 CFM Motor Class in the spec table, 297 in feature text | 3 | Two figures on one listing page |
| JennAir Euro-Style 36 inch JX3 Gas Downdraft Cooktop JGD3536GS | JX3 downdraft system | 297 CFM Motor Class | 3 | No noise figure published |
Read the table as three dialects, not one ladder. A CFM exhaust rating, a Motor Class figure and a CFM-plus-sones pairing describe blower strength in different terms, and the sections below keep each maker’s wording intact while explaining what a buyer can and cannot conclude from it.
How we selected
The field was built the same way as every guide in this series: a model counts when an opened maker or listing page shows a gas cooktop with the vent built into the unit, currently sold. That rule produces five models from three makers, and it excludes the electric downdraft units and standard gas cooktops that roundups file here by mistake.
What differs in this guide is the order of evidence. Burner data is reported in full, because a vent does not cook dinner, but the comparison leads with the vent: the published figure, the fan speeds behind it, the noise data where a maker prints it, and the ducting each system expects below the counter.
Figures are quoted exactly as published, including the one place where a single listing prints two different numbers for the same blower. Smoothing that disagreement away would make the guide tidier and less true, and a vent comparison lives or dies on the honesty of its numbers.
Nothing here ranks a vent by a figure its maker did not publish. Where a page prints no noise rating, the guide says so. Where a figure is a class rather than a rating, it is compared as a class. The result is less tidy than a single ranked list, and considerably more useful in a real kitchen.
Gas cooktops with downdraft, ordered by published vent figure
The five sections below run from the largest published vent figure to the most conservatively stated one. Each covers the vent system first, then the burner set it serves, then the ducting and conversion notes, and finally the limit that keeps the model from being the automatic vent-first pick.
GE Profile 30 inch Built-In Gas Downdraft Cooktop PGP9830DRBB
The maker page for this 30 inch GE Profile model states the strongest vent numbers in the field: a downdraft exhaust rated at 400 CFM and 7.0 sones at high speed, worked by a variable speed fan with three settings, high, medium and low. It is the only vent in the group sold with its noise level printed beside its strength.
That pairing matters, because vent shopping usually trades strength against sound in the dark. Here both numbers are on the page, stated at the same fan setting, so a buyer can weigh the loudest, hardest-working mode before the unit is in the counter rather than discovering it at the first full boil.
The burners it vents are four sealed units on a gas-on-glass ceramic surface: 9,100 BTU at left front and left rear, 11,500 BTU at right front and 5,500 BTU at right rear. Moderate figures, deliberately so; this platform spends its engineering emphasis on the exhaust side of the cutout.
Supporting data is complete: overall dimensions 29.75 by 21.875 by 23.875 inches including the downdraft housing, a cutout of 28.75 by 20.5 inches, net weight 60 lb, an included LP conversion kit listed as part WB28X45706, medium cast grates the maker lists for dishwasher cleaning, and a limited 1-year parts and labor warranty.
- Pros: highest published CFM in the field; only noise rating published; full dimensions and warranty stated
- Cons: lowest burner outputs of the five; heaviest unit at 60 lb
Buy if the vent is the appliance you are really shopping for and your cooking is everyday in scale. Skip if burner heat leads, because every other model in this guide publishes a stronger top burner.
KitchenAid 36 inch 5 Burner Gas Downdraft Cooktop KCGD506GSS
The maker states this 36 inch model’s vent as a 300 CFM exhaust rating with a 3-speed fan control, and describes the downdraft ventilation as needing no separate hood. An exhaust rating is a plain claim about air moved, and 300 CFM is the figure KitchenAid stands behind at both widths in its line.
What the page does not state is a noise figure, so the sound of that 300 CFM at full speed is not a published fact. Buyers sensitive to vent noise will find the GE’s printed sones figure easier to plan around; KitchenAid’s page simply leaves the question open, and this guide leaves it open too.
The vent serves the strongest burner set in the field: a 17K BTU Professional Burner, a 15K BTU Professional Burner and a 5K BTU Even-Heat Simmer Burner with a melt cap are named on the page, over full-width cast-iron grates, with electronic ignition and automatic re-ignition. Two more burners are fitted; their outputs are not stated on the maker page.
Conversion notes round out the page: an LP conversion kit is listed, and duct-free venting is possible with a kit that is not included. For a vent-first buyer, that last line matters: duct-free operation changes how the vent handles air, and it is a kit decision, made at ordering, not a switch on the unit.
- Pros: clear 300 CFM exhaust rating; strongest burner set for the vent to serve; full-width grates
- Cons: no published noise figure; two burner outputs unstated; duct-free kit not included
Buy if you want a plainly stated exhaust rating under a genuinely strong set of burners. Skip if published noise data is a requirement, since this page offers none at any fan speed.
KitchenAid 30 inch 4 Burner Gas Downdraft Cooktop KCGD500GSS
The smaller KitchenAid repeats its sibling’s vent figure exactly: a 300 CFM exhaust rating with a 3-speed fan control, in a 30 inch, four-burner unit. In vent terms, downsizing the cutout costs this line nothing on paper, which makes it the vent-first pick for compact kitchens that still cook hard.
The burners under that vent are the same named trio as the 36 inch model: 17K BTU and 15K BTU Professional Burners and a 5K BTU Even-Heat Simmer Burner with a melt cap, over full-width cast-iron grates. A fourth burner is fitted and its output is not stated on the maker page.
Strong burners make a vent earn its rating, and this pairing is the clearest case in the guide: high output at the surface, a published exhaust figure of the same class as the wide model, and three fan speeds to match draw to the job, from a simmering pan to a stockpot at a rolling boil.
The rest of the maker page mirrors the larger unit: downdraft ventilation with no separate hood needed, electronic ignition with automatic re-ignition, stainless steel knobs, an LP conversion kit listed, and duct-free conversion available with a kit sold separately. No dimension table and no noise figure appear on the page.
- Pros: full-size vent rating at 30 inches; strong named burners; three fan speeds
- Cons: no noise figure or dimensions on the maker page; fourth burner output unstated
Buy if your cutout is 30 inches and vent strength per inch of counter is your metric. Skip if printed dimensions are a precondition of ordering; two models below publish theirs in full.
JennAir 30 inch JX3 Gas Downdraft Cooktop JGD3430GS
The vent on this 30 inch JennAir is the JX3 downdraft system with three speeds, and its blower is the most argued-over figure in this guide. The listing’s feature text describes a vertically mounted 297 CFM Motor Class blower; the spec table on the same page lists CFM Motor Class as 310. Both numbers are genuine page content, and they do not agree.
Motor Class is a class figure rather than an exhaust rating, which already sets it apart from the KitchenAid and GE numbers. Adding a two-value disagreement on top makes this the vent to buy on system design rather than on arithmetic: three speeds, a vertically mounted blower and a platform with a long production history behind it.
The burners are the fullest mapped set in the guide: left front 17,000 BTU, right rear 15,000 BTU, right front 10,000 BTU and left rear 5,000 BTU with a melt cap, in brass with a removable base. Continuous cast iron grates, Flame-Sensing re-ignition and a power-outage-compatible listing round out a detailed spec table.
Planning data is equally full: 30 inches wide, 21.5 deep, 4 high at the surface, a cutout of 28.625 by 19.938 inches, 46 pounds net, LP conversion with the kit included, duct-free conversion with an optional kit, and grates the maker lists for dishwasher cleaning. No noise figure is published for the JX3 system on the pages read here.
- Pros: detailed spec table; full burner map; LP kit included; cutout figures printed
- Cons: blower figure printed as both 297 and 310; class figure rather than an exhaust rating
Buy if you value the JX3 system and the deepest paperwork in the field. Skip if you want one vent number, stated once, that lines up directly against the KitchenAid exhaust rating.
JennAir Euro-Style 36 inch JX3 Gas Downdraft Cooktop JGD3536GS
The maker page for this 36 inch Euro-Style model states its JX3 vent plainly: three speeds and a 297 CFM Motor Class blower. Within the JennAir line that figure is consistent here, printed once for the wide model, and it places the unit in the same strength band as its 30 inch sibling and the KitchenAid pair.
As a Motor Class figure it should not be read as three points behind the KitchenAid 300 CFM exhaust rating in any precise sense. The two makers are describing blower strength in different vocabularies, and the honest reading is that the wide JennAir vents in the same class as the rest of this field while stating it the most conservatively.
The burners are five sealed units in brass with a removable base, anchored by a 17,000 BTU Ultra-High Output Burner and a 5,000 BTU Ultra-Low Output Burner with a Melt Cap. The maker lists DuraFinish Protection on the stainless models and covers duct-free conversion with an optional kit and LP conversion for propane homes.
The page’s thin spots are the middle burner outputs, which are not printed per position, and the absence of a noise figure and a dimension table. The black glass finish of this same platform prints more data on its own page, but this guide holds each model to the page that presents it.
- Pros: JX3 system with a single stated figure; sealed brass burners; melt cap; finish choice
- Cons: class figure only; middle burners unstated; no noise or dimension data on the page
Buy if the wide JennAir platform and its burner build appeal, and a class-band vent figure is enough. Skip if your comparison method needs exhaust ratings and noise numbers in print for every contender.
Buying guide
Vent-first buying has its own sequence: understand what the figures mean, weigh the noise data that exists, plan the duct run that decides real performance, and only then match the vent to all the burners above it. The sections below follow that order.
How gas cooktops with downdraft move air, in plain terms
A downdraft vent pulls cooking vapor down at the surface instead of letting it rise to a hood. The intake sits in or beside the cooking surface, the blower sits in the housing below, and the air leaves through a duct under the floor or through the cabinet run, or is filtered and returned when the unit runs duct-free.
Surface-level capture is the design’s strength and its limit in one. Steam from a low skillet is already at the intake’s height and is drawn off directly. Steam from a tall stockpot rises well above the surface before it spreads, and some of it escapes the draw of any downdraft, whatever its published figure says.
That is why vent figures in this category should be read as capacity, not as a promise about every pot. A higher published figure gives the system more draw to work with, and fan speed puts that draw where the cooking is, but the shape of the cookware and the height of the steam column stay part of the result.
CFM ratings, Motor Class and sones, translated
CFM is cubic feet per minute, a measure of air volume moved. When KitchenAid states a 300 CFM exhaust rating and GE states 400 CFM at high speed, both are describing the vent’s air movement in the same plain terms, and those two figures can be compared directly, with the GE ahead on paper.
Motor Class is JennAir’s own classification for its JX3 blowers. The figures, 297 and 310 depending on the page and table, sit in the same numerical neighborhood as the exhaust ratings, but they are not the same measurement, and treating them as a photo finish against 300 or 400 would invent a precision the makers do not claim.
Sones measure perceived loudness, and only GE publishes them here: 7.0 sones at high speed, beside its 400 CFM. One published noise figure cannot rank the field for quietness, since the other makers print none. It does let a GE buyer judge the trade at the top setting with both numbers in hand, which is more than the other pages offer.
The duct run decides more than the figure does
Every vent in this guide performs through a duct run, and the run is where strength is kept or lost. A short, straight path to an outside wall lets a blower work near its rating. A long path with several turns asks the blower to push against resistance the whole way, and the air that arrives outside is less than the figure on the box promised.
Plan the run before the cooktop, not around it. The housing below the surface needs depth the cabinet plan has to give it: GE prints an overall height of 23.875 inches including its downdraft housing, a concrete reminder that the vent occupies real cabinet volume beneath any of these five models.
Duct-free conversion is the release valve when no run can be built. KitchenAid and JennAir both list it, with the kit separate in each case. Filtered, returned air is a different result from air sent outside, so treat duct-free as a layout solution with a venting trade attached, and price the kit into the order from the start.
Fan speeds and matching draw to the cooking
All five models run three fan speeds, and that uniformity is useful: the control question is settled across the field, so the buyer’s attention can stay on figures and ducting. Three speeds cover the real range of need, from a pan at a bare simmer to a full boil or a hard sear throwing vapor off a skillet.
Running the vent at the speed the cooking asks for is most of vent craft. Low speed for low vapor keeps the kitchen quiet through a long sauce. High speed is for the short, heavy bursts. The middle setting, where most weeknight cooking lives, is where a three-speed system spends its working life on any of these models.
Ignition interacts with the vent more than buyers expect. A downdraft draws air past the flames, and a low burner can be disturbed by the draw or by a draft in the room. KitchenAid lists automatic re-ignition and JennAir lists Flame-Sensing re-ignition, two published answers to the same physical fact, and both are worth having on a downdraft surface.
Pairing the vent to the burners above it
A vent’s workload is set by the burners it serves. The KitchenAid pair put 17,000 BTU class burners over a 300 CFM exhaust rating, a balanced pairing for hard cooking. The JennAir pair do the same over a Motor Class system of similar stated size. GE reverses the emphasis: the strongest vent in the field over the gentlest burner set.
Neither emphasis is wrong; they suit different kitchens. A household that boils and sears daily loads its vent with vapor and wants burner headroom first. A household whose cooking is gentler but whose kitchen opens to the living space may value the GE’s stronger draw and printed noise figure more than burner output it would rarely use.
Read the pairing, not the parts, when you decide. The right question is whether the vent figure and the burner map rise together for the way you cook, and the product sections above lay out exactly that balance for each of the five, in the makers’ own published terms.
FAQ
The last questions are the vent-specific ones: whether the GE figure settles the ranking, how much ducting matters against the printed numbers, what duct-free operation gives up, and whether a downdraft can match a hood for a heavy-cooking household.
Does the GE 400 CFM figure make it the strongest vent here?
On published figures, yes: 400 CFM at high speed is the largest exhaust number in the field, and it is the only one paired with a noise rating. Against the KitchenAid 300 CFM exhaust rating the comparison is direct, since both makers state an exhaust figure, and the GE figure is the higher of the two.
Against the JennAir Motor Class figures the comparison is a band rather than a ranking, because the terms differ. And in an installed kitchen the duct run still has the final word: a well-run 300 CFM system can out-vent a badly run 400 CFM one, which is why this guide reports figures and ducting together.
How much does the duct run really matter?
More than the gaps between these five models’ figures. Length and turns add resistance the blower works against, so two kitchens with the same cooktop can end with noticeably different venting. The published figure describes the vent; the run describes your kitchen’s share of the result.
The practical steps are plain: keep the run short, keep turns few, and read the install guide for the exact model before cabinetry is set. Where no outside run is possible, the duct-free conversions listed by KitchenAid and JennAir are the planned alternative, not an improvisation after delivery.
What does duct-free operation give up?
Ducted venting sends cooking air outside the house. Duct-free venting filters the air and returns it to the room, so vapor and fine particles are handled by the filter rather than removed from the kitchen entirely. For many kitchens that trade is acceptable; it should still be made knowingly.
Both KitchenAid models and both JennAir models list duct-free conversion, with the kit separate in each case, and the GE’s page centers on its ducted exhaust figures. If duct-free is your only route, the kit’s inclusion and upkeep belong in the purchase decision alongside the cooktop itself.
Can a downdraft match an overhead hood?
They capture air at different heights, and each design has work it does best. A hood gathers vapor after it rises, over a wide area. A downdraft draws at the surface, close to low pans, and asks nothing of the space above the cooktop, which is the entire reason these five models exist for islands and open plans.
For tall-pot and heavy steam cooking, the surface draw has the layout limit described in the buying guide, and no figure in this field repeals it. For ordinary pans in a kitchen where a hood does not fit the design, the published figures here, 300 to 400 CFM class, describe vents built to do the whole job.
Which model is the vent-first choice at each width?
At 30 inches, the GE Profile PGP9830DRBB, on the strength of its 400 CFM published figure and its printed noise rating. At 36 inches, the KitchenAid KCGD506GSS, whose 300 CFM exhaust rating is the clearest statement at the width and whose burner set gives the vent the most to do.
Both answers come with their model’s trade attached: the GE’s gentle burners at 30 inches, the KitchenAid’s unpublished noise and dimension data at 36. A vent-first buyer who accepts those trades gets the strongest published venting in the field at either width.
Conclusion
Judged on venting, the field orders itself by dialect: GE states the most, 400 CFM with a noise figure; KitchenAid states a clear 300 CFM exhaust rating at both widths; JennAir states a Motor Class figure in the same band. Pick the dialect you trust, plan the duct run well, and the vent will do its work.