Updated Nov 16, 2026· 16 min read

Key takeaways

  • The six analog mixers for studios compared on preamps, EQ, bus counts and computer links, from a compact SSL desktop unit to a 24-input console with subgroups.

The best analog mixers for studios earn their place on sound, routing and how they hand audio to a recorder. These six range from a two-preamp SSL desktop unit built for front-end and summing work to full-size consoles with subgroups, a matrix and direct outputs for multitrack capture. Each one earns its place differently.

Quick verdict

The Mackie 1642VLZ4 is the balanced all-rounder for a home studio, with 10 Onyx preamps and a proper 4-bus layout. The Allen & Heath ZED-24 brings the most channels and long-throw faders, the SSL SiX brings console-grade processing in miniature, and the PreSonus AR8c is the easiest route into multitrack recording.

Model Mic preamps Channels EQ Computer link
Mackie 1642VLZ4 10 Onyx 16 3-band (80 Hz, 2.5 kHz, 12 kHz) None
Allen & Heath ZED-24 16 DuoPre 16 mono + 4 stereo 3-band with swept mid Stereo USB in/out
Yamaha MG20XU 16 D-PRE 12 mono + 4 stereo 3-band, swept mid on mono channels 2-in/2-out USB, 24-bit/192 kHz
Soundcraft GB2 16 GB30 on every input 16 mono + 2 stereo 4-band with two swept mids None
Solid State Logic SiX 2 SuperAnalogue 2 mono + 2 stereo, 12 inputs at mixdown 2-band, switchable shelf or bell None; insert sends double as record sends
PreSonus StudioLive AR8c 4 XMAX 4 mic, 2 instrument/line, 2 stereo pairs 3-band 8×4 USB, 24-bit/96 kHz, plus SD recorder

How we selected

Every desk here is a true analog mixer that a studio can build around: real preamps, real faders and routing that feeds a recorder cleanly. We weighted preamp quality and count first, then bus structure, EQ and the path each desk offers for getting tracks into a DAW.

The six split by philosophy. The Mackie, ZED-24 and GB2 are traditional consoles with no or minimal digital conversion, designed to pair with a separate interface or recorder. The MG20XU and AR8c add USB links of their own, stereo in the Yamaha’s case and full multitrack in the PreSonus’s case. The SiX is a different animal again: a small-format SSL front end and summing mixer for studios that already own conversion and want analog processing and summing on the way in and out.

We kept the set distinct from our live-and-studio analog list, so there is no model overlap between the two articles. Figures below come from each maker’s published specifications and manuals.

Analog mixers for studios, model by model

Channel counts run from 6 to 24 and preamp counts from 2 to 16, so the right pick depends on how you record: tracking full bands at once, overdubbing one source at a time, or summing stems that were tracked elsewhere. Read the routing sections closely, because that is where these desks really part company.

Mackie 1642VLZ4

The Mackie 1642VLZ4 is the home studio anchor of this list: a 16-channel compact analog mixer with 10 Onyx mic preamps, a 4-bus design and the routing flexibility to handle tracking, overdubbing and mixdown without external patching gymnastics. Mackie positions it squarely at the home studio.

The Onyx preamps offer an ultra-wide 60 dB gain range, 128.5 dB dynamic range and distortion under 0.0007% across 20 Hz to 50 kHz, and the 16 high-headroom line inputs accept +22 dBu with +4/-10 operation control for matching professional and consumer gear. Each mic channel carries a 3-band EQ fixed at 80 Hz, 2.5 kHz and 12 kHz, plus an 18 dB/octave 75 Hz low-cut filter for clearing rumble before it reaches the recorder. Phantom power is on board for condensers.

Routing is the reason this desk suits studios. The ALT 3/4 bus gives you a second stereo pair for routing channels to a recorder or a submix, 4 aux sends feed effects and headphone mixes, and 4 stereo returns bring processors and playback back into the desk. A control room and phones source matrix lets you monitor the main mix, the ALT bus or tape returns without repatching. The 60mm long-wearing log-taper faders, high-resolution 12-segment stereo meters, sealed rotary controls and steel chassis are built for daily use, and a multi-voltage power supply travels between countries. Rack ears are an optional kit.

The clear limit is digital: there is no USB interface, so the Mackie needs a separate interface or recorder to reach a DAW, and the fixed-frequency EQ is less surgical than the swept designs elsewhere here. Buy it if you want a dependable analog hub for a home studio and already own conversion. Skip it if you want the mixer itself to be your interface.

  • Pros: 10 Onyx preamps with 60 dB gain range and low distortion
  • Pros: 4-bus routing with ALT 3/4, 4 aux sends and 4 stereo returns
  • Pros: Control room and phones source matrix for flexible monitoring
  • Cons: No USB interface for direct DAW recording
  • Cons: Fixed-frequency 3-band EQ

Allen & Heath ZED-24

The Allen & Heath ZED-24 is the biggest traditional desk here, with 16 mono channels, 4 stereo channels and 100mm faders throughout. It suits studios that track larger line-ups live off the floor and want a stereo feed to the computer without extra hardware.

Each mono channel runs a DuoPre preamp, a two-stage design with a 69 dB gain range that keeps noise low, with mic preamp EIN rated at -127 dBu. Mono channels carry a 3-band EQ with a sweepable midrange, a 100 Hz high-pass filter at 12 dB/octave and an insert point for outboard processors, while stereo channels get a 2-band EQ. Four aux buses split into two pre-fade sends for monitors and two post-fade sends for effects, and the pre-fade pair can be configured as a stereo pair and routed to the USB record feed. In total the desk handles 23 independent sources to the mix and 10 independent outputs, with THD+n of 0.004% on the mic path and 21 dB of analog headroom.

The USB connection is a stereo bi-directional codec, 16-bit and USB 1.1 compliant, running at 32, 44.1 or 48 kHz. Routing is configurable: send the main mix pre- or post-fade, or send auxes 1-2 or 3-4 as an independent stereo record feed, and return computer audio into the desk for playback or for using plug-in effects as inserts. Construction is serious, with vertically mounted channel circuit boards in a steel chassis, and the 645 mm wide surface weighs 10.5 kg.

The limits follow from its generation: USB is stereo only, so multitrack capture needs an interface fed from the desk’s outputs, and there is no built-in effects engine. Buy it if you track full bands through a console and record a stereo mix or a pair of aux feeds. Skip it if per-channel multitrack recording from the desk itself is the plan.

  • Pros: 16 DuoPre preamps and 24 input channels
  • Pros: 100mm faders and a swept mid EQ on every mono channel
  • Pros: Configurable stereo USB send, including aux pairs
  • Cons: USB link is stereo and 16-bit only
  • Cons: No built-in effects

Yamaha MG20XU

The Yamaha MG20XU packs 20 channels, 16 D-PRE preamps, built-in SPX effects and a high-resolution USB link into a metal chassis that still weighs only 7.1 kg. It is the convenience pick for studios that also stream, teach or rehearse in the same room.

Twelve mono channels and four mono/stereo channels give a maximum of 16 mic and 20 line inputs. The D-PRE preamps are discrete class-A designs using an inverted Darlington circuit, with +48V phantom power and PAD switches on the first 12 channels for hot sources. Eight channels carry a 1-knob compressor that sets gain, threshold and ratio together, with the threshold moving from +22 dBu to -8 dBu and the ratio from 1:1 to 4:1 as you turn it up. EQ is 3-band with +/-15 dB of range: a 10 kHz shelf on top, a 100 Hz shelf below, and a mid band that sweeps from 250 Hz to 5 kHz on mono channels. Equivalent input noise is rated at -128 dBu and crosstalk at -78 dB.

The SPX processor offers 24 editable programs including reverbs and delays, with a parameter control and a footswitch jack that toggles the effect return. The USB interface runs 2-in/2-out at up to 24-bit/192 kHz over USB Audio Class 2.0, and a Cubase AI download is included. Four group buses and four aux sends (one feeding the internal effects) cover submixing and monitors, the main stereo outputs are locking XLRs, a rack-mount kit is in the box, and the internal universal power supply accepts 100 to 240 V while drawing 36 W.

The USB link is stereo, like the ZED-24’s, so the desk records its mix rather than separate tracks, and the shared single effects processor cannot run different effects per channel. Buy it if you want one desk for tracking sessions, rehearsals and streaming with effects on board. Skip it if you need multitrack USB recording or per-channel compression on every input.

  • Pros: 16 class-A D-PRE preamps in a light, rack-ready chassis
  • Pros: 24 SPX effects programs and 1-knob compressors on 8 channels
  • Pros: USB audio at up to 24-bit/192 kHz
  • Cons: USB recording is stereo only
  • Cons: One shared effects processor for the whole desk

Soundcraft GB2 16

The Soundcraft GB2 16 is a pure analog console from the company’s GB series: 16 mono inputs plus 2 full-feature stereo channels, GB30 preamps and EQ, and the routing of a small touring desk. It suits studios that record through a separate multitrack interface and want console features that compact desks leave out.

Every mono input carries the GB30 mic preamp with gain variable from +5 dBu to +60 dBu, individually switched 48V phantom power, a phase switch and a 100 Hz high-pass filter with an 18 dB/octave slope. The 4-band GB30 EQ gives shelving bands at 12 kHz and 80 Hz plus two sweepable mids, 80 Hz to 1.9 kHz and 550 Hz to 13 kHz, with +/-15 dB on every band. Six aux sends split into two fixed pre-fader, two switchable pre or post fader and two fixed post-fader. Published figures include mic EIN of -128 dBu, THD+N under 0.006% and adjacent channel crosstalk below -99 dB.

The routing depth is the story. Four sub groups arranged as two stereo pairs, a 6×2 output matrix, L/R recording outputs and direct outputs on every mono channel, switchable pre or post fade, make it straightforward to feed a multitrack recorder channel by channel while still mixing a stereo balance. A talkback facility assigns to aux sends and group outputs, the all-steel chassis uses one PCB per channel, connectors are Neutrik XLRs and metal TRS jacks, and the integral power supply has a link option for an external backup supply. At 22 kg it is a fixture, not a portable.

There is no USB connection and no effects, by design, and availability runs through install and pro-audio channels rather than general stock, so expect to order it in. Buy it if you want direct outputs, subgroups and a matrix in a compact frame and you already own recording hardware. Skip it if you need a desk that talks to a computer on its own.

  • Pros: Direct outputs on every mono channel for multitrack feeds
  • Pros: 4-band EQ with two swept mids, plus subgroups and a 6×2 matrix
  • Pros: Per-channel phantom switching and a talkback facility
  • Cons: No USB link and no built-in effects
  • Cons: Sold through pro channels; often an order-in item

Solid State Logic SiX

The Solid State Logic SiX shrinks the large-format SSL formula into a desktop mixer: two SuperAnalogue mic preamps, channel compression and EQ, the G Series bus compressor, and 12-input analog summing at mixdown. It is a front end and finishing tool rather than a tracking console.

Channels 1 and 2 each carry a SuperAnalogue preamp with +72 dB of gain, enough for passive ribbon microphones, plus individually switchable phantom power, a 75 Hz high-pass filter and a line input that switches to instrument level. A newly designed SSL compressor on each channel uses program-dependent attack with fixed ratio and release and automatic makeup gain, and the 2-band EQ switches between shelf and bell curves. Balanced insert points are fitted, and the insert send is always active, so it doubles as a record send straight to your interface or recorder.

Channels 3 and 4 are stereo line channels with trim and pan, two further stereo external inputs carry level controls, and everything sums to the main mix bus: 12 inputs at mixdown for stemming out of a DAW. The G Series Master Bus Compressor sits across the main outputs with fixed ratio, attack and release settings. The master section adds two cue buses for artist mixes, main and alternate monitor outputs with a monitor source matrix, mono check, dim and cut, and a talkback input with phantom power and the Listen Mic Compressor. Faders are full-size 100mm, the signal path is completely balanced, and the unit runs from an included external 15V DC supply at 7.7 lb.

Two mic preamps is the hard ceiling: full-band tracking is out, and there is no USB interface, so the SiX always works alongside separate conversion. Buy it if you overdub one or two sources at a time, sum stems in analog, and want SSL processing on both ends of the chain. Skip it if you need to mic a drum kit or a live band in one pass.

  • Pros: SuperAnalogue preamps with +72 dB of gain
  • Pros: G Series bus compressor and 12-input summing
  • Pros: Full control room section with talkback and Listen Mic Compressor
  • Cons: Only two microphone inputs
  • Cons: No USB interface; needs separate conversion

PreSonus StudioLive AR8c

The PreSonus StudioLive AR8c is the small hybrid of the group: an 8-channel analog mixer whose USB interface records every channel plus the main mix. For podcasters, small studios and musicians who record a few sources at once, it removes the separate interface entirely.

The analog side has 4 balanced microphone inputs with Class A XMAX preamps, 2 instrument/line inputs with high-impedance inputs for guitars, and 2 pairs of stereo balanced line inputs. The stereo Super Channel (channels 7/8) adds Bluetooth wireless, RCA inputs, a 1/8-inch stereo input and switchable SD or USB stereo playback. Channels carry a 3-band analog EQ, and there is a mic/line boost for low-level sources. The XMAX preamps provide a 43 dB gain range from +12 to +55 dB with equivalent input noise under -128 dBu and THD under 0.01%, and phantom power is +48 VDC.

Recording is where it outruns the other small desks here. The USB 2.0 interface, connected over USB-C, runs 8×4 at 24-bit/96 kHz and records every channel plus the main mix into the included Capture software, and a perpetual Fender Studio Pro license is included for editing and mixing. A built-in 2×2 SD recorder captures the main mix as a stereo WAV file at 24-bit/44.1 kHz to SD or SDHC cards up to 32 GB, so a session or rehearsal can be documented with no computer attached. A stereo effects processor offers 16 presets including reverb, delay and chorus, with a dedicated send and return and a bypass footswitch jack. The unit measures 280 x 90 x 313 mm and weighs 3.2 kg.

Four mic preamps limits ensemble work, and the SD recorder captures only the stereo mix rather than separate tracks. Buy it if you record small line-ups and want multitrack USB, a built-in stereo recorder and a DAW license in one small box. Skip it if your sessions need more than four microphones at once.

  • Pros: Multitrack USB recording of every channel plus the main mix
  • Pros: Built-in SD recorder for the stereo mix with no computer
  • Pros: Capture software and a Fender Studio Pro license included
  • Cons: Only four microphone preamps
  • Cons: SD recording is stereo only

Buying analog mixers for studios

Analog desks differ less in headline channel count than in how they connect to the rest of a studio. These are the decisions that decide whether a mixer becomes the center of the room or an obstacle in the signal path. None of them requires spending more; all of them reward thinking first.

Start with preamps and gain range

The preamp sets the noise floor of everything you record. Gain range matters as much as count: quiet sources such as ribbon microphones need the 69 to 72 dB on offer from the ZED-24 and SiX, while loud sources need pads or generous headroom like the Mackie’s +22 dBu line handling.

Noise figures such as EIN around -127 to -128 dBu on the ZED-24, MG20XU and AR8c tell you the preamps will stay quiet at high gain.

Decide how the desk feeds your recorder

There are three patterns here. Direct outputs, as on the GB2, feed a multitrack interface channel by channel and keep the desk purely analog. A stereo USB link, as on the ZED-24 and MG20XU, records the finished mix and returns playback. Both approaches are legitimate; they serve different habits.

A multitrack USB interface, as on the AR8c, turns the desk into the recorder’s front end. Pick based on whether you mix as you track or track first and mix later in the DAW.

Match the bus structure to your workflow

Subgroups let you balance a drum kit or a stack of backing vocals on one fader: the GB2 and MG20XU offer four groups, the Mackie offers its ALT 3/4 second bus. Aux counts decide how many separate headphone mixes and effect sends you can run at once, from the SiX’s two cue buses to the GB2’s six aux sends.

A matrix, found on the GB2, adds independent feeds for a second room or a broadcast split.

Weigh EQ depth against speed

Four-band EQ with two swept mids, as on the GB2, can notch out problem frequencies while tracking. Three-band designs with one swept mid, as on the ZED-24 and MG20XU, cover most tone shaping. Most vocal and instrument shaping happens in that one swept band.

Fixed-frequency EQ on the Mackie and the SiX’s switchable 2-band design are faster to use and harder to get wrong, which suits engineers who prefer to fix tone at the microphone and keep desk EQ gentle.

Check monitoring and talkback

A studio desk lives or dies by its control room section. Look for switchable monitor sources, a phones feed that can follow different buses, and talkback to the performers: the Mackie’s source matrix, the SiX’s monitor matrix with dim and cut, and the GB2’s assignable talkback all solve the same problem at different scales.

If clients attend sessions, a second monitor output pair, as on the SiX, keeps everyone hearing the same mix.

FAQ

Common questions about putting an analog desk at the center of a studio, covering interfaces, channel counts, direct outputs, summing and whether a live-style console belongs in a recording room at all. Most answers point back to specific desks in the list above.

Do analog mixers for studios need a USB interface?

No. A USB link is a convenience, not a requirement. Desks such as the Mackie 1642VLZ4, GB2 and SiX are designed to work with a separate interface or recorder, which lets you choose your own conversion quality and channel count. That separation also makes upgrades cheaper later.

Built-in USB earns its place when you want fewer boxes, as with the AR8c’s multitrack recording, or a simple stereo feed for streaming and reference mixes, as on the ZED-24 and MG20XU.

How many channels does a studio mixer need?

It depends on how you record. Overdubbing one or two sources at a time works on the SiX or AR8c. A full band tracked live with a multi-mic drum kit can pass 16 channels quickly, which points to the ZED-24, MG20XU or GB2. Count your largest session, add spares for returns and playback, and buy for that number rather than your average day.

What is a direct output used for?

A direct output takes a single channel’s signal out of the desk on its own socket, usually to feed one track of a multitrack recorder or interface. On the GB2 every mono channel has one, switchable pre or post fader, so you can record clean per-channel tracks while the desk still produces a stereo mix for monitoring.

Insert sends can do similar duty, as they do on the SiX.

Can an analog mixer sum stems from a DAW?

Yes, that is the summing role the SiX was built for: it sums up to 12 inputs at mixdown and runs the result through its G Series bus compressor. Any of the larger desks here can also sum line-level stems through their line inputs, though they lack the SiX’s dedicated external inputs and bus processing.

Your interface needs enough outputs to feed the channels you plan to sum.

Is a live mixer suitable for a studio?

Often, yes. The ZED-24, MG20XU and GB2 all come from live and installed sound lines, and their preamps, EQ and routing work just as well on a recording session. What they usually lack is studio furniture such as multiple control room outputs or elaborate talkback, and what they gain is durability and faders built for constant use.

Check the monitoring section against your room before deciding.

Conclusion

For a first serious studio desk, the Mackie 1642VLZ4 balances preamps, routing and price of entry better than most. The ZED-24 and GB2 scale up channels and routing, the MG20XU adds effects and high-resolution USB, the AR8c folds multitrack recording into a small footprint, and the SiX serves studios that track small and finish in analog.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.