Updated Nov 16, 2026· 14 min read

Key takeaways

  • Compare six good looking truck grills for a Silverado by generation, finish, lighting and install method, covering 1999 to 2022 Silverado 1500 trucks in all.

A new grille is the fastest face change a Silverado can get, but grilles are built per generation, and the wrong one will not sit in the opening. This guide sorts looking truck grills for a Silverado by year range, finish, lighting and install method across four generations of the truck, from the 1999 body to the 2022 body.

Quick verdict

For the oldest trucks, the SPEC-D Tuning grille is the standout, with a black mesh face and LED lamps that need no wiring. The 2007 to 2013 generation gets two picks, the PIT66 grille with interchange numbers and the Auto Dynasty grille with light strip wiring. Newer trucks split between the Paramount packaged grille and the HECASA grille.

Looks drive this keyword, so finish and face pattern lead every entry below: glossy black mesh, matte black mesh, a badgeless full frame, and a black and silver two-tone. Under the looks, the practical splits are whether the box includes hardware and instructions, whether any lighting needs wiring, and whether the maker recommends professional installation.

  • 1999 to 2002 trucks: SPEC-D Tuning glossy black mesh grille with LED lamps and no wiring.
  • 2007 to 2013 trucks, factory match: PIT66 grille with stated interchange part numbers.
  • 2007 to 2013 trucks, lit frame: Auto Dynasty badgeless mesh grille with light strip wiring included.
  • 2016 to 2018 trucks: Paramount Automotive packaged grille in matte black with LED lighting.
  • 2016 to 2019 old body style trucks: HECASA two-tone upper grille, black and silver.
  • 2019 to 2022 trucks: RainMan S black front bumper grille with a ventilation hole design.
Product Years covered Style and finish Lighting Main limit
SPEC-D Tuning Mesh Grille with LED Lamps 1999 to 2002, plus Tahoe and Suburban Mesh, glossy black LED lamps, no wiring No instructions included
PIT66 Front Grille 2007 to 2013 Grille, finish not stated None listed Finish not stated on the page
Auto Dynasty Front Upper Bumper Grille 2007 to 2013 Badgeless mesh, matte black LED running light strips Light strips need the included wiring run
Paramount Automotive Impulse Packaged Grille 41-0193MB 2016 to 2018 Mesh, matte black LED Three model years only
HECASA Upper Grille GM1200753 2016 to 2019 old body style Upper grille, black and silver None listed Mounting hardware not included
RainMan S Front Bumper Grille 2019 to 2022 Front bumper grille, black None listed No instructions included

How we selected these grills

Each grille here had to name its Silverado year range on an opened maker or listing page, and the grille had to show as a current, orderable part. Pages that showed a grille out of stock were set aside. Every specification quoted, from interchange part numbers to mounting styles, comes from a page that was opened, not from a search result line.

The six picks cover four generations of the Silverado 1500: one grille for the 1999 to 2002 body that also fits its Tahoe and Suburban siblings, two for the 2007 to 2013 body, two for the 2016 to 2019 body, and one for the 2019 to 2022 body. The two generations with two picks each get contrasting choices on purpose, one factory-minded and one style-minded, so the short list for your years is a real decision.

Where a page states a weakness, the article keeps it. Two of these grilles ship without instructions, one ships without mounting hardware, and one listing does not state its finish at all. Those gaps are part of the comparison, because a grille that looks right and arrives incomplete is a different purchase from one that arrives ready to bolt on.

Six good looking truck grills for a Silverado compared

The six grilles below run oldest generation first. Each entry gives the exact product name, the years and trims the maker or listing states, the material and finish, any lighting, and the limits that matter, including missing hardware or instructions, so you can weigh the look of each grille against the work it asks of you.

SPEC-D Tuning Glossy Black Mesh Grille with LED Lamps

This SPEC-D Tuning grille gives the 1999 to 2002 Silverado the sharpest face in the oldest group here: a glossy black mesh grille with integrated LED lamps, built from materials the maker describes as meeting or exceeding OEM standards. The maker states a direct bolt-on fit with no wiring or modifications, even with the lamps built in.

The stated fitment is wide for its era: Silverado 1500 and 2500 of 1999 to 2002, Silverado 3500 non-HD of 2001 to 2002, and the Tahoe and Suburban 1500 and 2500 of 2000 to 2006. Two cautions ride along. The maker recommends professional installation, and no instructions are included in the box, so the bolt-on claim and the missing instructions have to be weighed together.

For an owner of the oldest body style here, this is the pick that changes the face the most with the least electrical work, since the lamps need no wiring run. Owners who want guidance in the box should note the missing instructions before choosing it over a simpler unlit grille.

  • Pro: glossy black mesh face with integrated LED lamps.
  • Pro: direct bolt-on, with no wiring or modifications stated.
  • Pro: also fits Tahoe and Suburban of the stated years.
  • Con: professional installation recommended by the maker.
  • Con: no instructions included.

Choose it if your truck is a 1999 to 2002 Silverado, or a Tahoe or Suburban in the stated years, and you want the lit mesh look. Skip it if your truck is an HD model or you want instructions in the box.

PIT66 Front Grille for Chevy Silverado 1500 (2007-2013)

The PIT66 grille is the factory-minded pick for the 2007 to 2013 Silverado 1500. The listing builds it from ABS plastic and backs the fitment with four interchange part numbers, 25810707, 19303978, 22849840 and GM1200572, and it states OE-standard impact resistance with a design that manages airflow while blocking road debris from the engine bay.

The trim coverage is broad: the listing names the Hybrid and XFE models alongside the LS, LT, LTZ and WT trims, which covers most of that generation’s lineup. The interchange numbers are the useful detail here, because they let you cross-check the grille against the part your truck already carries before you order, instead of trusting a photo.

The listing does not state a finish for this grille, and that gap is flagged in the table rather than guessed at. Buyers choosing mainly on color should confirm the finish on the listing page. Buyers choosing on fitment confidence get the strongest paper trail of the six picks here.

  • Pro: four interchange part numbers stated for cross-checking.
  • Pro: fits Hybrid and XFE models plus LS, LT, LTZ and WT trims.
  • Pro: OE-standard impact resistance stated by the listing.
  • Con: finish not stated on the listing page.
  • Con: no lighting or styling extras listed.

Choose it if your 2007 to 2013 Silverado needs a factory-matching replacement and you can match an interchange number. Skip it if the finish is your deciding factor and you cannot confirm it first.

Auto Dynasty Front Upper Bumper Grille Grill Replacement

Where the PIT66 grille above plays it factory, this Auto Dynasty grille restyles the same 2007 to 2013 Silverado 1500: a badgeless mesh face on a full front frame, built from reinforced ABS plastic with durable polycarbonate, finished in matte black, and sold with the wiring for LED running light strips included in the package.

The maker states a direct replacement fit with no drilling, so the restyle does not ask for new holes in the truck. The badgeless face is the styling point: removing the bowtie from the grille opening gives this generation a cleaner, debadged front end that the factory grille never offered. The included wiring means the light strips are a planned part of the install, not an extra purchase.

Pick between this and the PIT66 on intent. The PIT66 matches the truck’s original part numbers; this grille changes the truck’s face on purpose and adds light. If your Silverado is a daily work truck, the factory match may serve better. If the truck is a project, this is the more interesting box.

  • Pro: badgeless mesh face on a full front frame.
  • Pro: reinforced ABS plastic with durable polycarbonate.
  • Pro: wiring for LED running light strips included.
  • Con: light strips add a wiring step the unlit picks skip.
  • Con: badgeless face will not suit owners who want the factory badge.

Choose it if your 2007 to 2013 Silverado is getting a restyle and you want the debadged, lit look. Skip it if you want a factory-matching part number or a no-wiring install.

Paramount Automotive 41-0193MB LED Matte Black Impulse Packaged Grille

Paramount Automotive builds this packaged grille for the Silverado 1500 of 2016 to 2018, part 41-0193MB, in ABS with a mesh style face and a matte black finish, and the opened product page showed the part in stock. The LED lighting is built into the Impulse design, and the install reuses the truck’s OE hardware.

The packaged grille format is the appeal: the grille arrives as a matched unit rather than an insert, and reusing the OE hardware means the mounting points and fasteners are the ones the truck already has. The matte black mesh reads as a factory performance trim look, darker and flatter than the glossy mesh on the oldest pick in this list.

The limit is the window: three model years, 2016 to 2018, and the 2019 old body style trucks fall outside it even though the body looks the same. Those owners should look at the HECASA pick below, which explicitly covers the 2019 old body style.

  • Pro: mesh face in matte black with LED lighting built in.
  • Pro: reuses the truck’s OE hardware for mounting.
  • Pro: opened product page showed the part in stock.
  • Con: fits only the 2016 to 2018 model years.
  • Con: one style and finish only.

Choose it if your Silverado 1500 is a 2016, 2017 or 2018 and you want a complete packaged grille with lighting. Skip it if your truck is a 2019 old body style or any other generation.

HECASA Silverado 1500 Upper Grille GM1200753 Black/Silver

The HECASA upper grille, part GM1200753, is the two-tone pick: high-grade ABS with a chrome-plated surface in a black and silver finish, built for the Silverado 1500 of 2016 to 2019 in the old body style. The listing states bolt and buckle mounting, and the factory emblem can be installed on it without modifications.

That emblem note matters more than it sounds. A grille that takes the factory emblem keeps the truck looking finished and factory-correct, and the no-modification fit means the emblem swap is part of the install rather than a fabrication job. The listing also describes the grille as impact-resistant and fade-resistant, which suits a bright finish that lives in direct sun.

The weaknesses are stated on the same page and they are practical: mounting hardware is not included, and no instructions are included. Plan the install around sourcing the hardware your truck needs, or plan to reuse what comes off the old grille in good condition.

  • Pro: black and silver two-tone finish with a chrome-plated surface.
  • Pro: factory emblem installs without modifications.
  • Pro: covers the 2019 old body style year the Paramount pick misses.
  • Con: mounting hardware not included.
  • Con: no instructions included.

Choose it if your 2016 to 2019 old body style Silverado wears the two-tone look well and you want the factory emblem kept. Skip it if you need hardware and instructions in the box.

RainMan S Front Bumper Black Grille Replacement

The RainMan S grille is the pick for the newest body here, the Silverado 1500 of 2019 to 2022: a front bumper grille replacement in black, built from black painted durable plastic or ABS. The listing points to its ventilation hole design, which is stated to support air circulation and heat dissipation through the front of the truck.

That ventilation note is the functional angle on a styling part. A replacement grille still has to pass air to the radiator, and this listing addresses the point directly with its hole pattern. The black finish keeps the newest generation’s large front end dark and uniform, matching the black trim these trucks commonly wear.

Two cautions come from the same listing: professional installation is recommended, and no instructions are included. For the newest and most complex front end in this roundup, that pairing argues for either shop help or careful study of the factory grille’s removal before starting.

  • Pro: fits the 2019 to 2022 generation, the newest covered here.
  • Pro: ventilation hole design stated for air circulation and heat dissipation.
  • Pro: black finish matches the dark trim of the generation.
  • Con: professional installation recommended.
  • Con: no instructions included.

Choose it if your Silverado 1500 is a 2019 to 2022 model and you want a black replacement that addresses airflow. Skip it if you want instructions in the box or a lit grille.

Buying guide

Silverado grilles reward buyers who check generation, hardware and emblem fit before falling for a finish. The five points below work through those checks in order, using the six picks above as the examples, so the grille you order is the one that fits your truck’s body, your trim, and your plans for the front end.

Match the grille to your Silverado generation

The Silverado 1500 has worn several front ends, and each grille here is built for one of them: 1999 to 2002, 2007 to 2013, 2016 to 2019, or 2019 to 2022. Openings, mounting points and trim all change between generations, so a grille from the wrong generation is not a close fit that can be persuaded in. It simply does not belong to that truck.

The overlap years need care. The 2019 model year appears in two ranges in this list because the old body style carried into 2019 alongside the new body. The HECASA listing handles this by stating old body style outright. If your truck is a 2019, identify its body style first, then shop the range that matches it.

How to judge looking truck grills for a Silverado by fitment

Fitment evidence comes in grades. The strongest grade is a stated interchange part number, like the four numbers on the PIT66 listing, which you can match against your truck’s existing part. Next comes a named trim list, then a plain year range. The weaker the evidence, the more the listing page has to confirm before you order.

Exclusions deserve the same attention as inclusions. The SPEC-D Tuning grille names the 3500 as non-HD only, which quietly excludes the HD trucks of those years. Reading the exclusions is what keeps a good looking grille from becoming a return, especially on the heavy duty and special trim trucks.

Mesh, slat and frame styles and what they change

Face style is the decision. A mesh grille, like the SPEC-D Tuning and Paramount picks, reads as a performance face and hides the radiator behind a screen. A badgeless full frame, like the Auto Dynasty pick, removes the bowtie for a debadged look. A two-tone upper grille, like the HECASA pick, keeps a brighter, factory-adjacent appearance.

Finish follows style. Glossy black mesh shines and shows dust; matte black mesh hides it and reads flatter; black and silver brightwork matches trucks with chrome elsewhere. None of the six listings offers a second finish on the same grille, so style and finish are chosen together, once.

Lighting in the grille: lamps, strips and none

Three of the six picks build lighting into the grille, two ways. The SPEC-D Tuning grille integrates LED lamps with no wiring or modifications stated, the simplest lit option. The Auto Dynasty grille includes wiring for light strips, a planned and packaged step. The Paramount grille builds LED lighting into its packaged unit.

The other three picks carry no lighting at all. That is not a defect; an unlit grille is the faster install and keeps the truck’s electrical system untouched. Decide whether the lit face is worth the wiring before comparing finishes, because lighting cannot be added to an unlit grille later without replacing it.

Hardware, instructions and install help

What is missing from the box varies by pick. The HECASA grille ships without mounting hardware or instructions. The SPEC-D Tuning and RainMan S grilles also ship without instructions, and both recommend professional installation. The Paramount grille reuses the truck’s OE hardware, so its fasteners are already on the truck.

Plan the install around the box you are actually getting. If hardware is missing, line up replacements or confirm the old grille’s hardware can be reused. If instructions are missing and professional installation is recommended, weigh a shop install as part of the purchase rather than discovering the gap with the front end apart.

FAQ

The questions below cover the points Silverado owners raise most with replacement grilles: how generations are sold, whether SUV siblings share fitment, what wiring and drilling the installs involve, whether the factory emblem carries over, and how to read an interchange part number.

Are looking truck grills for a Silverado sold by generation?

Yes. Every grille here is listed for a set of years that follows a Silverado generation, and none claims to span generations. The ranges are 1999 to 2002, 2007 to 2013, 2016 to 2019 and 2019 to 2022. Shop inside your truck’s range, and treat a listing that promises one grille for many generations with care, because the openings and mounts differ.

The 2019 overlap is the exception that proves the rule: two body styles share that year, and the careful listings say old body style when they mean the earlier one. Match body style, not just the calendar year, on a 2019 truck.

Will a Silverado grille also fit a Tahoe or Suburban?

In one case, yes, because the maker says so. The SPEC-D Tuning grille lists the Tahoe and Suburban 1500 and 2500 of 2000 to 2006 alongside the Silverado of 1999 to 2002, since those trucks shared a front end in that era. None of the other five listings claims SUV fitment, so for any other grille the answer is no unless its listing states it.

Do these grilles need wiring or drilling?

Mostly no, with one exception. The SPEC-D Tuning grille states no wiring or modifications despite its LED lamps. The Auto Dynasty grille states no drilling and includes light strip wiring, so its one wiring step is packaged. The remaining picks describe bolt-on, buckle or OE hardware mounting, and none of the six asks for drilling into the truck.

Can the factory emblem move to the new grille?

For the HECASA, the listing answers directly: the emblem can be installed without modifications. For the Auto Dynasty grille the answer is no by design, since a badgeless face is the point and there is no emblem to move. The other listings do not address the emblem, so if keeping the bowtie matters, confirm on the listing page before ordering.

What does an interchange part number tell me?

An interchange number ties a grille to the part it replaces. The PIT66 listing states four: 25810707, 19303978, 22849840 and GM1200572, and a number matching your truck’s part is the strongest fitment evidence a listing can offer. When a listing gives interchange numbers, use them; when it does not, lean harder on year, trim and exclusion checks.

Conclusion

Pick by generation first: SPEC-D Tuning for the oldest trucks and their SUV siblings, PIT66 or Auto Dynasty for 2007 to 2013, Paramount or HECASA for 2016 to 2019, and RainMan S for 2019 to 2022. Then let finish, lighting and the contents of the box settle the rest, and your Silverado gets the face you pictured.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.