Updated Nov 16, 2026· 14 min read

Key takeaways

  • Compare six good looking grills for Tundra trucks by generation, style and install method, from overlays to a genuine TRD Pro grille, for 2007 to 2022 trucks.

The Tundra has worn four faces since 2007, and each one takes a different grille. This guide sorts looking grills for Tundra trucks by generation, from the 2007 to 2009 body to the current truck, covering overlays, inserts, full shells and a genuine TRD Pro grille, with the cutting, sensor and emblem notes that decide each pick.

Quick verdict

For 2007 to 2009, the APG mesh overlay is the no-cut pick, while the MUSMAPE gloss black shell is the replacement. 2010 to 2013 splits between the SAIQINGSP shell, which carries part numbers, and the T-Rex billet insert, the one pick that cuts the factory grille. 2014 to 2021 gets the Roar TRD Pro grille, and the newest get the genuine article.

Two warnings run through the list. The Roar grille states plainly that it does not support factory sensor mounting, so a sensor-equipped 2014 to 2021 truck needs that settled before ordering. And the T-Rex insert is a permanent modification: its install cuts the center out of the factory shell, which cannot be undone by unbolting anything.

  • 2007 to 2009, no cutting: APG stainless steel mesh grille, overlay fit.
  • 2007 to 2009, full shell: MUSMAPE gloss black TR style front grille.
  • 2010 to 2013, factory numbers: SAIQINGSP magnetic gray shell grille.
  • 2010 to 2013, billet look: T-Rex billet grille insert, cutting required.
  • 2014 to 2021, TRD Pro style: Roar Grilles mesh grille with emblem and hood piece.
  • 2022 and newer, genuine part: Toyota Tundra TRD Pro grille, OEM components.
Product Years covered Type and finish Install note Main limit
APG Mesh Grille GR20GFF42T/H 2007 to 2009 Mesh overlay, stainless steel No drill or cut per maker Professional installer recommended
MUSMAPE Gloss Black Tr-Style Front Grill 2007 to 2009 Full grille, gloss black plastic Replacement part One finish only
SAIQINGSP Magnetic Gray Shell Front Grill 2010 to 2013 Shell grille, painted Replaces OEM 531000C220 One color only
T-Rex 20961 Billet Grille Insert 2010 to 2013 Insert, billet Cutting and grinding required Permanent modification
Roar Grilles TRD Pro Style Mesh Grille 2014 to 2021 Mesh grille, matte black Uses existing bolts No factory sensor support
Toyota Tundra TRD Pro Grille, Genuine OEM 2022 and newer Center grille, OEM components Direct replacement TRD Pro package trucks only

How we selected these grills

Each grille here had to state its Tundra year range on an opened maker or listing page, and every specification quoted, from package dimensions to screw counts, comes from an opened page. One candidate was set aside on stock grounds: an Armordillo mesh grille for the 2007 to 2009 trucks whose opened page showed it temporarily out of stock.

The six picks cover all four Tundra generations: two for 2007 to 2009, two for 2010 to 2013, one for 2014 to 2021, and one genuine part for the 2022 and newer truck. The generations with two picks get contrasting constructions on purpose, an overlay against a full shell in the oldest group, and a painted shell against a cut-in billet insert in the second.

Where a page states a hard limit, the article keeps it in the entry and the table: a sensor exclusion on the Roar grille, a cutting requirement on the T-Rex insert, and a package restriction on the genuine TRD Pro grille. Looks may lead this keyword, but the limits are what decide whether a grille belongs on your truck.

Six good looking grills for Tundra trucks compared

The six grilles below run oldest generation first. Each entry gives the exact product name, the stated years and trims, the construction and finish, how the part installs, and the limit that matters most, including the two picks whose install or sensor notes need a decision before you order.

APG Mesh Grille, part GR20GFF42T/H

The APG grille is the gentle option for the 2007 to 2009 Tundra: one stainless steel mesh grille that installs as an overlay, with the maker’s document marking the install as no drill and no cut. The hardware is listed: 3 screws at 6-32 by 1 inch, 3 K-Lock nuts at 6-32, 3 washers and 3 flat tabs, and the maker recommends a professional installer.

An overlay keeps the factory shell in place and dresses its face with stainless mesh, which suits a truck whose grille is sound but plain. Stainless steel is also the only metal mesh in this list; the other mesh picks are ABS or plastic. The professional installer recommendation is the counterweight, since the part count is small but the maker still advises help.

Owners who want to change the whole shell rather than dress it should take the MUSMAPE pick below instead. Owners who want the lightest possible intervention on a 2007 to 2009 truck, with metal rather than plastic doing the work, are the audience for this one.

  • Pro: stainless steel mesh, the only metal mesh here.
  • Pro: overlay install, no drill and no cut per the maker.
  • Pro: full hardware list stated, screws, nuts, washers and tabs.
  • Con: professional installer recommended by the maker.
  • Con: overlay only, the factory shell stays underneath.

Choose it if your 2007 to 2009 Tundra grille is sound and you want a metal mesh face without cutting. Skip it if the shell itself needs replacing.

MUSMAPE Gloss Black Tr-Style Front Grill Grille

The MUSMAPE grille is the full replacement for the same 2007 to 2009 trucks: a TR style front grille in gloss black plastic, sold under brand model B307 with manufacturer part MMPA000B307 and graded by the maker as a Replacement Part. Where the APG pick dresses the factory shell, this one takes its place with a complete gloss black face.

Gloss black is the styling statement here, and it is the only finish offered. The TR style shaping gives the oldest Tundra in this list the deep, dark front end that the later TRD Pro trucks made familiar. Because it is a full grille rather than an overlay, it is also the fix when the factory shell is cracked or its finish is gone.

One honest note belongs with this pick: at research time its listing page showed no featured offer, so its current sale status needs confirming on the listing page before you plan around it. The part, its fitment years and its identifiers are all stated; the open question is only the present offer.

  • Pro: full grille replacement in gloss black.
  • Pro: TR style face updates the oldest generation.
  • Pro: maker identifiers stated, model B307 and part MMPA000B307.
  • Con: gloss black is the only finish.
  • Con: sale status needs confirming on the listing page.

Choose it if your 2007 to 2009 Tundra needs a complete grille and you want the gloss black TR style look. Skip it if you want an overlay, a matte finish, or a confirmed offer before planning.

SAIQINGSP Magnetic Gray Shell Front Grill

For the 2010 to 2013 Tundra, the SAIQINGSP grille is a painted bumper shell that replaces a named factory part: the listing states it replaces OEM 531000C220, part TO1200336, in a painted magnetic gray finish. The listing gives the part’s weight at 13 pounds, its package dimensions at 52 by 18 by 5.5 inches, and its model number as 1103249829.

A stated factory replacement number is the strongest fitment evidence in this whole roundup, because it ties the shell to the exact part your truck already carries. The painted finish is the other half of the appeal: magnetic gray reads as a factory color rather than an accessory black, which suits owners who want the grille to blend instead of contrast.

The limits are color and scope. Magnetic gray is the only finish listed, and this is an upper shell grille for the stated years only. Owners of the same generation who want the billet look instead should read the T-Rex entry next, and accept the very different install it demands.

  • Pro: replaces a named OEM part, 531000C220 and TO1200336.
  • Pro: painted magnetic gray finish reads as factory.
  • Pro: weight and package dimensions stated on the listing.
  • Con: one color only.
  • Con: upper shell only, for 2010 to 2013 trucks.

Choose it if your 2010 to 2013 Tundra needs a shell that matches the factory part number and color family. Skip it if you want black, billet, or a different generation’s part.

T-Rex 20961 Billet Grille Insert, 1 Pc.

The T-Rex insert is the commitment pick for the 2010 to 2013 Tundra: a one-piece billet grille insert, part 20961 and 20961B, whose maker instructions require cutting out the center of the factory grille shell and grinding the lip smooth. The parts list is one billet grille, 2 U nuts, 6 screws at number 8 by 3/4 inch, and 6 nut plates.

The tool list in the same document sets expectations plainly: 10 and 8 mm sockets, a jig saw, a grinding wheel and a 1/8 inch drill bit. This is a workshop install that permanently alters the factory shell, and in exchange it gives the billet bar look set into the original surround, a finish none of the overlays or shells in this list reproduce.

Weigh it as a one-way door. Every other pick here can be unbolted and the truck returned to stock; this one cannot, because the shell it mounts in has been cut to receive it. Owners who lease, or who may sell the truck to a stock-minded buyer, should take the SAIQINGSP shell above instead.

  • Pro: billet insert look set into the factory surround.
  • Pro: full parts list stated by the maker.
  • Pro: one-piece insert for the 2010 to 2013 grille.
  • Con: requires cutting and grinding the factory shell.
  • Con: permanent, the swap cannot be reversed.

Choose it if your 2010 to 2013 Tundra is a keeper and you want the billet face badly enough to cut for it. Skip it if you want any path back to stock.

Roar Grilles Front Grille for 2014-2021 Toyota Tundra TRD PRO Style Mesh Grille with Emblem and Hood Piece

The Roar grille brings the TRD Pro face to the 2014 to 2021 Tundra: a honeycomb mesh grille in high quality ABS with a matte black finish and a gloss black U-shaped frame, sold with a TOYOTA emblem and a hood piece in the package. The maker lists dimensions of 138 by 45 by 16 cm and an install that uses the existing bolts and pre-drilled holes.

The trim coverage is the broadest here: SR, SR5, Limited, Platinum and TRD models of the stated years. That breadth comes with the sharpest limit in the roundup, stated by the maker in plain terms: the grille does not include or support factory sensor mounting locations. A truck whose sensors live in the grille needs that settled before this part is ordered.

The seller showed the grille in stock at research time under its stated SKUs. For a non-sensor truck in the stated trims, this is the most complete style package in the list, grille, emblem and hood piece together. For a sensor truck, it is a pass unless the sensor question finds an answer on the maker page.

  • Pro: TRD Pro style honeycomb face with emblem and hood piece included.
  • Pro: fits SR, SR5, Limited, Platinum and TRD trims.
  • Pro: installs with existing bolts and pre-drilled holes.
  • Con: does not support factory sensor mounting locations.
  • Con: one generation only, 2014 to 2021.

Choose it if your 2014 to 2021 Tundra is in the named trims and does not rely on grille-mounted sensors. Skip it if your truck’s sensors mount in the grille.

Toyota Tundra 2022 and Newer TRD PRO Grille, Genuine OEM

The last pick is the genuine part: a TRD Pro grille for the 2022 and newer Tundra, built from genuine OEM-grade plastic and metal components, for trucks with the TRD Pro package. The listing describes a center grille only, with no lighting included, a direct replacement fit, and professional installation recommended.

A genuine grille is the answer when the original is damaged and the truck is a TRD Pro: the part matches the factory piece in material and fit rather than imitating it. The package restriction is the boundary to respect. The listing ties this grille to TRD Pro package trucks, so a 2022 or newer Tundra without that package is not its stated fitment, however similar the opening may look.

Owners of older trucks should not stretch this pick backward; each earlier generation has its own picks above. Within its stated fitment, though, this is the one grille in the list whose provenance is the factory itself.

  • Pro: genuine OEM-grade plastic and metal components.
  • Pro: direct replacement for the factory TRD Pro grille.
  • Pro: exact fitment for 2022 and newer TRD Pro package trucks.
  • Con: TRD Pro package trucks only.
  • Con: no lighting included, center grille only.

Choose it if your 2022 or newer Tundra has the TRD Pro package and needs the factory grille itself. Skip it if your truck lacks the package or is an earlier generation.

Buying guide

Tundra grilles reward the same discipline as the trucks themselves: confirm the generation, decide how permanent the change should be, and settle the sensor and emblem questions before the finish seduces you. The five points below use the six picks above as the working examples.

Four generations, four different openings

The Tundra generations here, 2007 to 2009, 2010 to 2013, 2014 to 2021 and 2022 onward, each carry a different opening and surround. No pick spans two generations, and that is normal for this truck: a grille is a generation part. Start by naming your generation, then compare the picks inside it, because cross-generation comparisons are meaningless.

The 2014 to 2021 generation is the long one, eight model years on one basic face, which is why the Roar grille can cover it with one part and a wide trim list. The first generation here splits into two ranges, 2007 to 2009 and 2010 to 2013, and their grilles do not interchange either.

How to judge looking grills for Tundra: insert, overlay or shell

Construction decides permanence. An overlay, like the APG mesh, dresses the factory shell and comes off. A shell or grille, like the MUSMAPE and SAIQINGSP picks, replaces the factory part and can be swapped back if you keep the original. An insert like the T-Rex billet piece installs by cutting the factory shell, a change that does not reverse.

Decide your permanence limit before your style. Owners who may return the truck to stock should stay with overlays and shells. Owners building a keeper can weigh the insert on its looks, with open eyes about the jig saw and grinding wheel its maker lists.

The sensor question on 2014 to 2021 trucks

One listing raises the sensor issue directly, in the generation where it matters most. The Roar grille states that it does not include or support factory sensor mounting locations. If your 2014 to 2021 Tundra carries sensors in the grille, that statement ends the discussion until the maker page offers a version that supports them.

The other listings do not address sensors at all, in either direction. Silence is not support. Any owner whose truck parks itself or reads the road through the grille should confirm sensor fitment on the exact listing page before ordering any pick here.

Finishes: matte black, gloss black, painted and billet

The finish palette here runs from matte black honeycomb on the Roar grille, to gloss black on the MUSMAPE shell and the Roar frame, to a painted magnetic gray on the SAIQINGSP shell, to billet bars on the T-Rex insert and stainless mesh on the APG overlay. Each pick offers exactly one finish, so finish and construction are chosen together.

Painted finishes blend with the truck; black finishes contrast with it; metal finishes announce themselves. A work truck that lives dusty will wear matte and painted finishes more gracefully than gloss, while a street truck can carry gloss black without showing every mile.

Cutting, grinding and professional installation

Install demands range from existing bolts on the Roar to a jig saw and grinding wheel on the T-Rex insert. Two makers raise professional installation: APG recommends one for its overlay, and the TRD Pro grille listing recommends it too. The Roar, MUSMAPE and SAIQINGSP picks describe replacement installs without that recommendation.

Read a professional recommendation as part of the part’s true shape. It does not forbid a home install, but it tells you the maker expects alignment, trim or fastener work that rewards experience. Weigh your time and tools against that honestly before the factory grille is on the floor.

FAQ

The questions below cover the fitment points Tundra owners raise most: model year ranges, TRD Pro style fitment on regular trims, factory sensors, which installs cut the truck, and what happens to the factory emblem on each pick. Each answer sticks to what the maker and listing pages state.

Are looking grills for Tundra sold by model year range?

Yes, every pick is listed for a closed range: 2007 to 2009, 2010 to 2013, 2014 to 2021, or 2022 and newer. The ranges follow the Tundra’s generations, and none of the listings claims a grille that spans ranges. Shop inside your truck’s range, and treat the stated years as the first filter, before style, finish or construction get a vote.

Within a range, trim still matters. The Roar grille names five trims for its years, and the genuine TRD Pro grille names a package. Year first, then trim, then style is the order that avoids returns.

Will a TRD Pro style grille fit a truck without the TRD Pro package?

For the 2014 to 2021 trucks, yes: it brings the TRD Pro face to the SR, SR5, Limited, Platinum and TRD trims. For 2022 and newer the answer flips: the TRD Pro grille is stated for trucks with the TRD Pro package, so it replaces a Pro grille, not an upgrade for other trims. Style grilles and genuine grilles solve different problems.

Do any of these grilles keep the factory parking sensors?

The one listing that addresses sensors says no: the Roar grille does not include or support factory sensor mounting locations. No other listing claims sensor support; the rest do not raise the subject. If your Tundra’s sensors mount in the grille, treat sensor support as unconfirmed on every pick and settle it on the maker page for the exact part.

Which picks require cutting the factory grille?

Only one: the T-Rex billet insert for 2010 to 2013, whose maker instructions call for cutting out the center of the factory shell and grinding the lip smooth. At the other end, the APG overlay is marked no drill and no cut by its maker, and the Roar grille installs on existing bolts. The two shells unbolt and bolt in their counterparts’ place.

Can I reuse my factory emblem?

The Roar grille removes the question: its package includes a TOYOTA emblem, so the lettered emblem arrives with the grille. The other listings do not state emblem fitment, and the T-Rex insert keeps the factory surround. If the emblem matters to the finished look, confirm its path on the listing page of the pick you choose.

Conclusion

Choose by generation, then by permanence: APG or MUSMAPE for 2007 to 2009, SAIQINGSP or the cut-in T-Rex for 2010 to 2013, Roar for 2014 to 2021 without grille sensors, and the genuine TRD Pro grille for the newest Pro trucks. Settle sensors and emblem before ordering, and the face you pictured is the face that arrives.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.