Key takeaways
- Six window treatments that fit windows with grilles, compared by minimum inside mount depth, flush depth and outside mount options from maker install guides.
The best window treatments for windows with grills are decided by depth, not fabric. A grille sits in or on the glass, and the shade has to share the frame with it, so the figures that matter are minimum inside mount depth, flush depth, and how each product handles an outside mount when the frame runs out of room.
Quick verdict
Cellular and honeycomb shades dominate this list for a physical reason: their headrails are the shallowest in the trade. The Bali cellular mounts in as little as 5/8 inch of frame depth, the Levolor and the Select Blinds cellular in 3/4 inch, and every product here publishes an outside mount route for frames that cannot take an inside mount.
Start with the Bali if your frames are shallow and the grilles sit between the glass, because nothing here beats its 5/8 inch minimum. Choose the Levolor when obstructions crowd the frame, since its instructions address clearance depth directly, or the Select Blinds shade when drilling into the frame is not acceptable and its no-drill headrail fits. The Hunter Douglas Applause earns its place on spacer blocks that push the shade forward, the IKEA blind removes depth from the problem entirely by mounting on the wall, and the Lutron Serena is the motorized option for deep frames.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Bali Cellular Shades | Custom cellular | Shallowest inside mount | 5/8 inch minimum depth, 3/8 inch single cell | Flush fit needs 2 3/8 inches |
| Levolor Cellular Shades | Custom cellular | Frames with obstructions | 3/4 inch minimum depth | Fully recessed needs 2-1/8 inches |
| Hunter Douglas Applause Honeycomb Shades | Custom honeycomb | Spacer blocks to clear trim | 1 inch minimum depth, 3/8 inch bracket | 3/4 inch bracket needs 2 1/2 inches flush |
| Select Blinds Value Cordless Blackout Honeycomb Shades | Made-to-order cellular | No-drill headrail option | 3/4 inch minimum depth | No-drill rail caps at 84 inches wide |
| IKEA TRIPPEVALS Black-Out Cellular Blind | Ready-made cellular | Wall or ceiling mount | Fixed sizes, including 38 by 76 3/4 inches | Mounts on wall or ceiling, not inside the frame |
| Lutron Serena Honeycomb Shades | Motorized smart shade | Deep frames, remote control | Inside mount needs 1 1/2 inches of depth | Deepest minimum depth in the group |
How we selected
Every product here had to publish its mounting geometry in a maker document: a minimum inside mount depth, a flush or fully recessed depth, and an outside mount requirement. Products whose makers publish none of those figures were left out, because a treatment that cannot state its depth cannot be matched to a grille window honestly.
The grille question has three forms, and the list covers all of them. Grilles sealed between the panes leave the room-side glass flat, so any inside mount that fits the frame works. Bars applied to the room-side surface project into the room, and the shade must hang in front of that projection or clear it. Removable inserts share the frame with the shade, so the two depths add up. Shallow inside mounts answer the first case, spacer blocks and extension brackets answer the second, and outside and wall mounts answer the third.
All six are cellular or honeycomb shades. That is where the published depths led: no curtain rod, roller or blind in the documents reviewed for this guide matched the cellular headrails for shallow mounting, and a rod or roll also hangs its fabric on a different line than a grille needs. The variety here is in the mounting systems, which is the part that decides fit.
Window treatments for windows with grills, pick by pick
The six treatments below are ordered by the depth they demand, from the shallowest inside mount to the wall mount that demands none. Each entry gives the minimum and flush depths from the maker’s own guide, plus the outside mount figures, so a tape measure against your frame settles the choice.
Bali Cellular Shades
Bali’s measuring guide gives its 3/8 inch single cell cellular the shallowest bracket figure in this group: a minimum depth of 5/8 inch for a partially recessed mount, with 2 3/8 inches needed for the headrail to sit flush with the casing. The same chart puts the 1/2 inch double cell flush figure at 2 5/8 inches.
The guide’s other figures matter for grille windows. On an inside mount the factory takes a 3/8 inch deduction from the width, so the shade arrives sized to the opening rather than to your tape. Outside mount brackets need at least 2 inches of flat surface above the window or on the frame. Lift options on the chart include cordless, continuous-loop and motorization, plus bottom up and top down configurations. For a between-glass grille, where the glass plane is flat and only the frame depth counts, that 5/8 inch minimum is the number to beat.
- Pros: shallowest minimum depth here, flush figures published per cell size, wide lift range
- Cons: flush fit needs 2 3/8 inches, wider cells push the flush figure higher
Buy if your frames are shallow, the grilles are sealed between the panes, and you want a custom shade that still tucks inside the frame.
Skip if you need the headrail fully hidden in a frame under 2 3/8 inches deep, because at that depth this shade sits partially recessed, with the rail projecting into the room.
Levolor Cellular Shades
Levolor’s installation instructions give a minimum inside mount depth of 3/4 inch and a fully recessed depth of 2-1/8 inches, with an outside mount minimum height of 1-1/2 inches. The same document tells the installer to check the clearance depth needed to avoid obstructions such as window cranks or handles before marking any bracket.
That obstruction sentence is why this shade suits grille windows with hardware in the way: the maker builds the clearance question into the first step of the install. Optional extension brackets cover outside and side mounts, projecting the shade forward off the wall or frame, which is the standard answer when an applied grille bar or a crank sits where the fabric wants to fall. Bracket counts run from 2 on shades 18 to 38 inches wide up to 6 over 140 inches. Lift systems are cordless, cord loop and motorized.
- Pros: clearance-for-obstructions step in the maker instructions, extension brackets available, shallow minimum
- Cons: fully recessed figure of 2-1/8 inches still rules out very shallow frames for a flush look
Buy if your window pairs its grilles with cranks, locks or handles near the frame, and you want the maker’s own process to account for them.
Skip if you want a no-drill install, because this system is bracket and screw based, or if your frame cannot give even the 3/4 inch minimum.
Hunter Douglas Applause Honeycomb Shades
The Hunter Douglas depth chart for its Duette and Applause honeycomb shades splits the figures by bracket: the 3/8 inch bracket needs a minimum of 1 inch and sits fully recessed at 1 11/16 inches, while the 3/4 inch bracket needs 1 1/4 inches minimum and 2 1/2 inches fully recessed.
The grille-relevant hardware is the spacer block. The same guide states that each spacer block projects the installation bracket 1/2 inch from the mounting surface, with up to 1 1/2 inches of blocks recommended per bracket. That is a published, maker-supported way to move a shade forward in half-inch steps, which is exactly the adjustment an applied grille bar or proud trim demands. Outside mounts need a minimum flat vertical surface of 5/8 inch with the 3/8 inch bracket or 1 inch with the 3/4 inch bracket, and brackets are marked 4 1/2 inches in from each jamb.
- Pros: spacer blocks give up to 1 1/2 inches of forward projection, shallowest fully recessed figure at 1 11/16 inches
- Cons: minimum depth starts at 1 inch, higher than the Bali or Levolor brackets
Buy if something on the window, a surface-applied grille, a crank or deep trim, needs the shade pushed forward by a measured amount rather than a guess.
Skip if your frame offers less than 1 inch of depth and nothing to project from, because the shallower brackets in this list start lower.
Select Blinds Value Cordless Blackout Honeycomb Shades
This made-to-order cellular publishes a minimum inside mount depth of 3/4 inch, a minimum flush depth of 2 1/8 inches and a minimum outside mount space of 1 1/2 inches. Its cordless headrail measures 1 7/8 inches deep by 5/8 inch high, in a 3/4 inch pleat, single cell shade in 100 percent polyester.
The option that earns its place here is the no-drill installation headrail: the maker describes a tension bar that locks the rail into the top of the frame with no tools and no holes, which matters on frames a renter cannot drill and on narrow frames where screws have little wood to bite. The no-drill rail needs 1 1/3 or 2 1/4 inches of depth, is inside mount only, and caps at 84 inches wide and 84 inches high. A 1 1/3 inch depth rail is also offered for shallow frames. Widths run 18 1/4 to 84 inches cordless and heights 12 to 84 inches, the maker rates the fabric to block up to 99 percent of incoming light, and a raised 48 inch shade stacks to about 5 to 6 inches at the top.
- Pros: no-drill tension headrail option, blackout fabric, shallow rail choice for tight frames
- Cons: no-drill rail is inside mount only and size capped, spacer and extension brackets are not offered for this model
Buy if drilling the frame is off the table, the window is within the size caps, and blackout matters as much as fit.
Skip if you need to project the shade forward off the frame, because this model offers no spacer or extension brackets, or if the window is wider than 84 inches with the no-drill rail.
IKEA TRIPPEVALS Black-Out Cellular Blind
TRIPPEVALS takes the opposite route from every custom shade above: the maker states it can be mounted on the wall or ceiling, with wall fittings included. A wall mount hangs the blind flat against the wall above the window, so frame depth, grille projection and inserts all stop mattering at once.
The trade is sizing. This is a ready-made blind in fixed sizes, including 38 by 76 3/4 inches, not a made-to-measure shade, so the window has to fit the blind rather than the other way around. The cord is hidden inside the blind. The black-out cellular fabric is the same honeycomb idea as the custom shades, with the cells trapping air, but the mounting is furniture logic: measure the wall, fix the brackets, hang the blind. For a grille window in a rental, or a frame too shallow or too ornate to drill, that simplicity is the whole argument.
- Pros: wall or ceiling mount clears every grille type, fittings included, no frame drilling
- Cons: fixed sizes only, wall mount leaves side gaps that an inside mount would not
Buy if the frame cannot take any inside mount, the window matches a stock size, and a clean wall-mounted blackout blind solves the room.
Skip if you need a precise fit, a flush inside look, or full edge darkness, because a wall-mounted blind stands off the glass and passes light at its sides.
Lutron Serena Honeycomb Shades
Serena is the motorized entry, and its maker’s selection guide is blunt about depth: the depth of the window must be at least 1 1/2 inches to use the inside mounting option, the deepest minimum in this group. Lutron deducts 1/8 inch per side on inside mounted shades to leave operating room.
The outside route is spelled out just as clearly. Mounting above the trim, the motorized bracket stands 2 5/8 inches high, and the guide recommends at least 3 1/8 inches of space above the top edge of the window trim for the brackets. Fabrics run single-cell and double-cell, light-filtering and room-darkening, on vinyl or aluminum headrails, with battery, plug-in or manual power and remote control. For a grille window with a deep frame, that buys a shade no one has to reach past the bars to operate, which is a real consideration on tall or furniture-blocked windows.
- Pros: remote operation suits hard-to-reach grille windows, clear published figures for both mount types
- Cons: 1 1/2 inch inside minimum excludes shallow frames, above-trim mount needs 3 1/8 inches of clear wall
Buy if your frames are deep, the windows are tall or blocked, and motorized control is worth more than the shallowest possible mount.
Skip if your frames run shallow, because at under 1 1/2 inches this shade cannot inside mount at all, and the Bali and Levolor brackets start far lower.
Buying guide
Fit is a measurement exercise before it is a shopping exercise. The notes below turn the makers’ published figures into a sequence: identify the grille type, measure the depth that remains, and only then choose between an inside mount, a projected mount and a wall mount.
Measuring frame depth for window treatments for windows with grills
Measure from the room-side face of the glass unit to the front edge of the frame, at the top of the window where the headrail will sit. Then subtract whatever stands in that space: the projection of an applied grille bar, the swing of a crank, or the thickness of a removable insert that shares the frame.
Compare the result with the minimum figures in this guide, not the flush figures. The minimum is what the bracket needs to hold; the flush figure is only about looks. A shade mounted at its minimum in a shallow frame works fully, it simply sits with its rail near the front of the frame. Measure both side jambs as well as the top, because older frames are rarely square, and the tightest reading is the one that decides.
Know which grille you actually have
Between-glass grilles are sealed inside the insulated unit, so the room-side surface is flat glass and the grille costs the shade nothing. Simulated divided lights are applied to the surface and project into the room, and that projection comes straight out of the depth the shade can use.
Removable inserts are the third case, and the easiest to misjudge: the insert occupies the inner part of the frame, the shade wants the outer part, and the two together cannot exceed the frame. If the insert must stay in while the shade is down, measure with the insert in place. If the insert comes out for the season the shade goes up, the full frame depth is available and the shallower mounts come back into play.
When the answer is an outside mount
An outside mount moves the whole problem onto the trim or the wall, and the makers here publish what it needs: at least 2 inches of flat surface above the window for the Bali brackets, a 1-1/2 inch minimum height for the Levolor, 1 1/2 inches of space for the Select Blinds shade, and 3 1/8 inches above the trim for the Serena brackets.
Outside mounting also buys light control, because the fabric can overlap the frame on both sides instead of leaving the small side gaps an inside mount always has. The trade is visual: the shade covers the trim, and on a window whose trim is part of the room’s character, that trade deserves a thought before the drill comes out.
Projection hardware, used honestly
Spacer blocks and extension brackets exist to move a shade forward by a stated amount: 1/2 inch per block on the Hunter Douglas system, up to 1 1/2 inches per bracket, and extension brackets on the Levolor for outside and side mounts. Used against a measured grille projection, they are the precise tool for the job.
What they cannot do is create depth that the frame does not have for the bracket itself. The bracket still needs its minimum mounting surface behind it. Projection answers a grille that stands proud of the glass; it does not answer a frame that is too shallow to hold a bracket, which is the wall mount’s job.
Stack height decides how much glass you get back
A raised cellular shade compresses into a stack at the top of the window, and on a grille window that stack covers the top lite first. The one stack figure published in this group, from the Select Blinds page, puts a 48 inch shade at about 5 to 6 inches raised and a 72 inch shade at about 6 to 7 1/2 inches.
On a window where the top row of lites matters, that stack is part of the fit decision, and it argues for mounting the shade as high in or above the frame as the chosen system allows. Where makers do not publish a stack figure for the model you are ordering, ask for it before ordering, because it cannot be changed afterward.
FAQ
The questions below are the ones grille windows actually raise: mount choice, fabric clearance against the bars, and what happens with inserts and cranks. The answers stay with the mounting figures and hardware the makers of the six treatments above publish in their own guides.
Do window treatments for windows with grills always need an outside mount?
No. Between-glass grilles leave the frame free, and the inside mount minimums here start at 5/8 inch for the Bali and 3/4 inch for the Levolor and Select Blinds shades. Most frames that can hold any shade at all can hold one of those with a sealed grille.
Outside mounts become the answer when the grille shares or crowds the frame: surface-applied bars that project, inserts that stay in year round, or frames shallower than 5/8 inch of usable depth. The outside figures in this guide run from a 1-1/2 inch minimum height to the Serena’s 3 1/8 inches above the trim, so the wall or trim has to be measured too.
Will the shade fabric rub against applied grille bars?
It can, if the shade is mounted behind the plane of the bars or if the fabric falls against them. A cellular shade hangs from its headrail in a straight drop, so the question is where that drop line falls relative to the front face of the grille, which is a mounting position decision, not a fabric decision.
The fixes are the ones the makers publish: mount the brackets so the drop clears the bars, project the shade forward on spacer blocks or extension brackets, or move to an outside mount where the fabric falls in front of the whole frame. A shade that clears the bars by a small margin when still will also clear them in a draft, because the fabric’s movement is modest this close to the glass.
Can a shade and a removable grille insert share one frame?
Yes, when the two depths add up to less than the frame offers. The insert sits against the glass and the shade’s headrail sits toward the room; the Bali minimum of 5/8 inch and the Levolor minimum of 3/4 inch are small enough that many frames hold both, which is exactly why shallow cellular rails lead this list.
Measure with the insert in place and work from the insert’s front face, not from the glass. If the remaining depth is under the minimum of the shade you want, the choices are a shallower shade, an outside mount, or accepting that the insert comes out when the shade goes up, which many owners already do seasonally.
What about windows with cranks and locks?
Cranks and locks are obstructions in the same sense as a grille bar: they occupy depth the shade wants. Levolor’s instructions address this directly, telling the installer to check the clearance depth needed to avoid obstructions such as window cranks or handles before marking brackets.
The working options mirror the grille answers. A shallow inside mount can sit in front of a low-profile lock; a crank that folds flat costs little; a crank that stands proud pushes the shade forward on projection hardware or out to an outside mount. Measure the obstruction at its proudest point, including the handle’s swing where it moves.
Do blackout shades work on grille windows?
Yes, with a gap caveat. The Select Blinds shade in this list is a blackout cellular whose maker rates the fabric to block up to 99 percent of incoming light, and the maker also notes that inside mounted blackout shades show light gaps at the edges, advising an outside mount for a higher level of blackout.
The grille itself does not leak light; the gaps live between the fabric edge and the frame. On a grille window the same advice holds, with the addition that the shade’s drop must clear the bars, so an outside mount that clears the whole frame usually serves blackout and grille clearance in one move.
Conclusion
Measure the frame, name the grille type, and the shortlist builds itself: Bali for the shallowest inside mount, Levolor where obstructions crowd the frame, Applause when the shade must project forward, Select Blinds when drilling is out, TRIPPEVALS on the wall when nothing else fits, and Serena for deep frames that want a motor.
Write Your Review
No reviews yet. Be the first to share your experience!