Updated Nov 16, 2026· 15 min read

Key takeaways

  • Six kitchen faucets with sprayer heads compared on flow rate, spout reach, spray functions, docking and hole counts, from budget pull-downs to a semi-pro model.

A sprayer turns a faucet from a fixed tap into a rinsing tool that travels to the mess. This guide compares six kitchen faucets with sprayer heads, five pull-down or pull-out models and their stated flow rates, reaches and docking systems, so you can pick the format that fits your sink and the way you cook.

Quick verdict

Every faucet here puts the sprayer in the spout, where it pulls down or pulls out on a hose and docks when the rinsing is done. Stated flow runs from 1.5 to 1.8 gpm, reach from 8.79 to 9 5/8 inches, and the group splits between magnetic docking systems, glide docking and a pause button at the head.

Product Type Best for Key spec Main limit
Delta Foundations 19904LF Pull-down with escutcheon Straightforward upgrades 1.8 gpm, 9 5/8 in reach Two spray functions only
Delta Leland 9178-DST Pull-down, traditional style Flexible hole layouts 1 to 4 hole mount Older sheet revision
Pfister Pfirst G133-10 Pull-out, single control Compact decks 1.8 GPM, ceramic disc valve No dimensions on the sheet
Kraus Oletto KPF-3104 Pull-down, high arc Tight backsplash spaces 16 1/4 in tall, 9 in reach Single hole, no deck plate
Hansgrohe Joleena 04793000 Pull-down with pause Controlled rinsing 1.75 GPM, pause diverter 150 degree swivel range
Moen Essie 87014SRS Pull-down, Power Clean Strong spray performance 68 in hose, 1.5 gpm Lowest flow in this group

How we selected

Each model here earned its place from a maker specification sheet or a detailed listing that states the sprayer arrangement in plain terms. A faucet counted only when its page confirms a pull-down or pull-out spray head, names its spray functions and prints a flow rate, because those facts decide how the sprayer will actually behave at the sink.

This selection is deliberately different from the side-sprayer and sensor roundups in the same series: no model repeats from those lists, and no touch or touchless models are included. Prices and ratings play no part. The comparison rests on stated flow, reach, height, swivel, hose figures, docking and warranty, exactly as each maker prints them.

Six kitchen faucets with sprayer heads to compare

The six models below cover the integrated sprayer market from its budget end to its design end, with two Delta pull-downs, a Pfister pull-out, a Kraus high-arc, a Hansgrohe with a pause control and a Moen built around spray power. Each entry states who the faucet suits, the specs the maker publishes, and the trade-offs.

Delta Foundations 19904LF

The Foundations pull-down is the no-drama pick, a current model on a 2025 maker sheet with every core figure printed. Delta describes a single handle pull-down from the Foundations collection, sold with an escutcheon, and the sheet lists a two-function wand with an aerated stream and a spray, switched at the head.

The maker states a maximum flow rate of 1.8 gpm at 60 psi, a spout reach of 9 5/8 inches, the longest in this group, and an overall height of 14 7/16 inches. The spout rotates 360 degrees, the cartridge is a ceramic disc cartridge, and installation is one or three hole with the escutcheon included. The wand docks with the MagnaTite docking system, the spray holes are Touch-Clean, so limescale wipes off with a finger, and the sprayer assembly carries dual integral check valves. The warranty is a lifetime limited warranty on parts and finish.

Nothing here chases a headline feature, and that is the point: reach, flow, docking and warranty are all stated and all competitive. For a first pull-down or a like-for-like upgrade on a one or three hole deck, the Foundations asks the fewest questions.

Pros: longest stated reach; current spec sheet; magnetic docking; lifetime warranty on parts and finish. Cons: two spray functions where rivals offer a pause or a third mode; styling is plain. Buy if you want a dependable pull-down with every figure in print. Skip if you want a distinctive design or extra spray modes.

Delta Leland 9178-DST

The Leland is the traditional-styled sibling, a single handle pull-down from Delta’s Leland collection with the curves older kitchens wear well. Its sheet covers both the 9178-DST and the soap-dispenser variant, and it lists the same Delta platform technologies as the brand’s current models.

The maker states a maximum of 1.8 gpm at 60 psi, an overall height of 14 7/8 inches and a spout reach of 9 13/64 inches. The wand is two-function, aerated stream or spray, the spout rotates 360 degrees, and the cartridge is a diamond coated ceramic cartridge under DIAMOND Seal technology. Docking is MagnaTite magnetic docking and the sprayhead is Touch-Clean. Installation is the most flexible here: one, two, three or four hole mount, with the escutcheon included. The warranty is a lifetime limited warranty on parts and finishes.

That hole flexibility is the Leland’s real argument. Decks drilled for old two-handle sets, with or without a sprayer hole to cover, accept this faucet without a new sink or a filler plate hunt. The sheet is an older revision than the Foundations sheet, but the model remains a listed, warrantied part of the range.

Pros: fits one to four holes; DIAMOND Seal valve platform; magnetic docking; traditional styling. Cons: sheet is an older revision; two spray functions only. Buy if your deck holes are irregular and your kitchen leans classic. Skip if you want the newest revision sheet and a third spray mode.

Pfister Pfirst G133-10

The Pfirst G133-10 is the pull-out of the group, the format where the whole spout head draws forward on its hose instead of dropping from a high arch. Pfister describes a single control pull-out kitchen faucet, and for low windows, shallow sinks and compact decks the lower, forward-working profile is often the better tool.

The maker sheet states a 1.8 GPM flow rate for the G133 version, noting that the non-G 133 version runs at 2.2 GPM, a two function pull-out spray, and a Pforever Seal ceramic disc valve. Installation is 1 or 3-hole, with a deck plate or a single hole mounting option. The faucet carries the Pforever Warranty and the sheet lists ADA compliance for the lever handle. One gap: the sheet’s dimension diagram prints no readable figures, so no reach or height is claimed here.

Pull-outs trade drama for control. The head comes to your hand at counter height, the stream points where you aim it, and there is no tall arch to crowd a window. The cost is clearance: tall pots fill with the head pulled out rather than under a high spout, which some cooks love and others never get used to.

Pros: pull-out control at a stated 1.8 GPM; ceramic disc valve; Pforever Warranty; 1 or 3-hole fitting. Cons: no printed dimensions on the sheet; lower profile limits under-spout filling. Buy if your sink sits under a window or shelf. Skip if you fill tall stockpots under the spout daily.

Kraus Oletto KPF-3104

The Oletto is the design pick, a gooseneck pull-down with a slim lever and a spot free finish, sized to fit under cabinets. The listing gives an optimized faucet height of 16 1/4 inches, a spout height of 7 7/8 inches and a spout reach of 9 inches, with a 360 degree swivel and a flow rate of 1.8 gpm.

The sprayhead is dual function, an aerated stream for everyday work and a spray for heavier rinsing, and Kraus names its systems Reach Technology for the sprayhead, with an easy-retract hose and a swivel adapter, and Perfect Glide docking, designed so the head glides into place and docks in alignment. The valve is a ceramic disc valve. The single lever operates with a 90 degree forward rotation, a detail that matters against a tight backsplash, and the listing states ADA compliance. The finish is spot free stainless steel with easy-clean nozzles.

Installation is 1-hole only, and the listing states the deck plate is not included, so three-hole decks need a plate sourced separately or a different model. The warranty listed is a limited lifetime warranty. Within those bounds, the Oletto is the most finished-looking faucet in this group.

Pros: spot free finish; forward-rotating lever for tight spaces; glide docking; full swivel. Cons: single-hole only; no deck plate in the box. Buy if your deck is one hole and your backsplash clearance is tight. Skip if you need an escutcheon included for a three-hole sink.

Hansgrohe Joleena 04793000

The Joleena is the control freak’s pick, a high-arc pull-down whose toggle spray diverter adds a pause feature, a temporary stop of the water stream at the head. Pausing at the wand, mid-rinse, without touching the lever, is a small feature that changes how a sprayer gets used across a long cooking session.

The maker sheet lists a maximum flow rate of 1.75 GPM and two sprays, an aerated spray and a handshower spray. Docking is a MagFit magnetic handspray holder. The cartridge is a ceramic cartridge, backflow prevention is integrated, and the hose extension length runs up to 14 1/2 inches. The swivel range is 150 degrees, the narrowest here, a deliberate limit that keeps the spout over the sink on the deck-mounted layouts this faucet is designed for. The sheet lists the finish as chrome and shows an escutcheon among the model’s parts.

Hansgrohe’s sheet is terser than the American makers’ sheets, with no overall height or reach printed, so those figures are not claimed. What is printed describes a precise, well-sealed faucet with the only pause control in this group.

Pros: pause at the sprayhead; magnetic docking; integrated backflow prevention; ceramic cartridge. Cons: 150 degree swivel is limited; no height or reach figures on the sheet. Buy if you rinse in bursts and want to pause at the head. Skip if you need a full-circle spout for a double basin.

Moen Essie 87014SRS

The Essie is the spray-power pick. Moen’s manual leads with Power Clean spray technology, stated to deliver 50 percent more spray power than its pulldown and pullout faucets without it, aimed at baked-on pans and sticky trays. The Reflex system handles the hose, with smooth movement and secure docking of the pull-down head.

The listed specifications give a maximum flow rate of 1.5 gallons per minute, the lowest in this group, a spout height of 15.73 inches, a spout reach of 8.79 inches and a hose length of 68 inches, by far the longest hose figure here. The finish is Spot Resist Stainless, which the maker describes as resisting fingerprints and water spots. Installation covers 1, 2, 3 or 4-hole sinks with the deck plate included, using the Duralock Quick Connect system, and this set includes a matching soap dispenser. The warranty is Moen’s Limited Lifetime Warranty.

The Essie makes an interesting trade explicit: less water per minute, more force per spray. If your rinsing is about pressure on the pan rather than volume in the pot, that is the right exchange, and the long hose lets the head work anywhere in or beside the basin.

Pros: strongest stated spray performance; 68 inch hose; spot resist finish; soap dispenser included in the set. Cons: 1.5 gpm flow is the group’s lowest; reach is mid-pack. Buy if rinsing power matters more than filling speed. Skip if you fill big pots constantly and count seconds.

Buying guide

Integrated sprayers look similar in photographs and behave differently at the sink, because the hose, the docking and the spray modes are engineered as a system. The five checks below use the figures and features the makers of these six models publish, so any pull-down or pull-out can be judged with the same yardsticks.

Pull-down, pull-out or side sprayer: kitchen faucets with sprayer formats

Three formats share this keyword. A pull-down head drops from a high arch into the basin, best for deep sinks and tall pots. A pull-out head draws forward from a lower spout, best under windows and on compact decks. A side sprayer sits in its own deck hole on its own hose, the older format covered in a separate roundup in this series.

Choose by geometry first. Measure the height above your sink, the depth of your basin and where the mess actually lands. Deep basin and open height argue pull-down; low clearance argues pull-out; a four-hole deck with a sprayer already fitted argues for keeping the side sprayer format rather than re-drilling around a new one.

Docking systems and hose behavior

The dock is the part you will judge daily. Magnetic systems, MagnaTite on the Delta models and MagFit on the Hansgrohe, pull the head home with a click and hold it flush. The Kraus answers with a glide design built for smooth retraction and aligned docking, and Moen’s Reflex retracts the hose itself so the head seats with help from the hose.

Hose length is the other half: 68 inches stated on one model here, an extension of up to 14 1/2 inches beyond the spout on another. A longer hose reaches a pot on the counter and the far end of a farmhouse basin, and it needs a clear loop under the sink to retract cleanly. Check that cabinet space before valuing the longest hose.

Spray modes and the pause button

Every model here offers stream and spray, which covers filling and rinsing. The differences are at the edges: one concentrates its spray for power and states a percentage gain over its standard heads, and one adds a pause that stops the stream at the wand. A third mode, where offered, usually splits the difference between stream and spray.

Match modes to your dishes. Heavy roasting and sheet pans argue for the power spray; delicate produce and glassware argue for a gentle aerated stream and a head that can be aimed closely, which is the pull-out’s home ground. The pause button suits cooks who move the head between items and hate reaching back to the lever with wet hands.

Flow rate against spray pressure

Flow and pressure are different things, and this group proves it: the lowest flow rating here, 1.5 gpm, sits on the model with the strongest stated spray performance, because its spray technology concentrates the water. The 1.8 gpm models fill pots faster. The 1.75 gpm model sits between, with a pause feature that trims waste between rinses.

Decide which job dominates your sink. Filling is a flow job, rinsing is a pressure job, and most kitchens do more rinsing than filling by count, even if filling feels longer. The spec sheet gives you the flow figure; the spray technology description gives you the pressure story. Weigh both lines, not just the bigger number.

Holes, escutcheons and what is in the box

Hole counts run from single-hole only to one model fitting one, two, three or four holes with its escutcheon. Two include a deck plate or escutcheon, one states that the deck plate is not included, and one set adds a soap dispenser for a spare hole. These box contents are worth money, so read them as part of the cost of the install.

Also read the connection system: quick connect fittings appear on two models here under different names, and they decide how the faucet fits under the sink and how a future hose swap goes. A first-time installer should favor the models whose sheets spell out the mounting pattern and the parts included, because surprises under a sink are never the good kind.

FAQ

Integrated sprayers prompt the same questions in every kitchen project: how the formats differ, whether the head will droop, and what the numbers on the sheet really predict. The answers below rest on the specification sheets and listings of the six models in this roundup, plus general points that apply to any pull-down or pull-out faucet.

Are kitchen faucets with sprayer heads hard to install?

No harder than a standard faucet, and in one respect easier: the sprayer needs no extra deck hole. The models here mount through one hole, or up to four with an escutcheon, and two makers fit quick connect systems that push supply lines together by hand. There is no control box or electronics to fit, which keeps the under-sink work simple.

The one step that deserves care is the hose loop. The hose and its weight need a clear hang under the sink so the head retracts and docks as designed. Clear the cabinet, route the loop away from the disposal and stored bottles, and the sprayer will behave. Most docking complaints trace back to a snagged hose, not a weak magnet.

Will the spray head droop over time?

Docking is engineered against exactly that. Magnetic docking on three models here pulls the head into a seat and holds it, a glide system on another aligns the head as it retracts, and a self-retracting hose system on the Moen keeps tension on the head so it stays home. These are the mechanisms to look for on any model beyond this list.

What wears is the hose path, not the magnet. A hose that rubs a sharp cabinet edge or a disposal housing will fray and retract unevenly, which reads as droop. Route the loop cleanly at install, and check it when you change the under-sink supplies. The faucets here all carry lifetime-class warranties on parts, which covers a docking failure that is genuinely the maker’s.

Is a pause button on the sprayhead useful?

On the one model here that offers it, pause stops the stream at the wand through a toggle diverter, so you can move between a pan in the sink and a pot on the counter without dripping across the deck or reaching for the lever. It is a small control that suits a particular rhythm: rinse, pause, move, rinse, all with one hand on the head.

If your rinsing happens in one place, pause adds little, and a plain two-function head is simpler. If you carry the sprayer around the sink area, pause is the feature you will use most after the spray itself. It also trims water waste in a way a flow figure cannot show, because the stream stops exactly when your hand leaves the work.

What flow rate should a sprayer faucet have?

The models here run from 1.5 to 1.8 gpm at 60 psi, the normal residential band. At 1.8 gpm a large pot fills at a pace most cooks accept; at 1.5 gpm filling slows, and the makers compensate with spray technology that concentrates the stream for rinsing. Neither figure is a defect, they are different allocations of the same water.

Your water pressure at home shifts the real numbers anyway, since the ratings are stated at 60 psi. A house with low pressure will feel the 1.5 gpm model more, and should favor flow; a house with strong pressure can take the pressure-focused model and never miss the difference. Read the rating as a ceiling, and the spray design as the character.

Can the sprayer hose be replaced later?

Yes, hoses are defined parts on these faucets, listed with lengths such as 68 inches on one model and an extension figure on another, and quick connect systems make the swap a hand job. The hose is the wear item of the format, flexing at every rinse, so a maker that prints its length and connection type is signaling a serviceable part.

When you shop, that is a quiet quality signal worth weighing beside the headline features. A sprayer faucet is a ten-year purchase, and the difference between brands often shows up in year six, when a hose or a cartridge needs changing and the parts and instructions are either easy to find or a research project.

Conclusion

Choose the Foundations for stated reach, the Essie for spray power and hose, or the Joleena for its pause control. The Leland fits awkward decks, the Pfirst suits low clearances, and the Oletto suits tight backsplashes. Match the format to your sink geometry first, then compare the sheets. Then check the docking before you buy.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.