Key takeaways
- Six kitchen sink faucets with sprayer, verified from maker sheets: Kraus, Delta, Kohler and Moen pull-down and pull-out models with spray modes and docking.
An integrated sprayer puts the rinsing head inside the spout itself, and this guide to kitchen sink faucets with sprayer compares six current models whose makers state the spray functions on the sheet, from a three-function Kraus bridge to a touchless Kohler, with modes and docking checked for each model.
The six share one architecture: the spray head lives in the spout, draws out on a hose for close work, and docks back when the job is done. Within that architecture they diverge widely, from a bridge-format Kraus with three spray modes to Delta’s ShieldSpray models, Moen’s Power Clean pull-out and sensor pull-down, and Kohler’s touchless Sensate with its Sweep spray blade.
Every spray claim below comes from an opened maker specification sheet: the number of functions, their names, the docking system, flow at 60 psi and the mounting pattern are quoted only where the maker states them. This list is deliberately separate from the side sprayer roundup in this series; not one model repeats from it.
Quick verdict
The Kraus KPF-3121 is the spray specialist: three functions including a Sweep mode, on a bridge pull-down with a 360-degree swivel. The Delta Cassidy matches its three-function count and adds ShieldSpray with touch control, the Moen Brecklyn is the compact pull-out with Power Clean, and the Kohler Sensate sprays without being touched at all.
Choose the Kraus if spray modes are the headline requirement. Pick the Cassidy or the Essa if you want Delta’s wand systems with magnetic docking, the Cassidy for ShieldSpray and the Essa for voice control on top. Take the Align if you want the sprayer to answer a wave, and the Brecklyn if your deck and your budget of space both run small.
Two-function wands dominate this category for a reason: stream for filling, spray for rinsing covers most kitchen work. The third functions here, Sweep and ShieldSpray, exist for the stubborn remainder, baked-on and stuck-on food, and the profiles below judge each model partly on whether that third mode earns its place.
How we selected
A model qualified only if its opened specification sheet states an integrated sprayer function: a pull-out or pull-down spray head, wand or sprayhead with named spray modes. Faucets with a fixed aerated spout and no spray function were excluded, as were all six models from the side sprayer roundup, keeping the two lists fully distinct.
Docking and hose details were recorded wherever the sheet states them, because an integrated sprayer is only as good as its return home. Magnetic docking, braided hoses and swivel joints all appear below in the makers’ own terms, and models whose sheets omit a detail are described without it rather than with a guess.
Kitchen sink faucets with sprayer: the six picks
Six faucets follow, each with its integrated sprayer documented on an opened maker sheet. Together they cover two-function and three-function heads, pull-out and pull-down formats, and control systems from a plain lever to touch, voice and sensors of every kind.
| Model | Sprayer format | Functions | Docking | Flow |
|---|---|---|---|---|
| Kraus KPF-3121 | Bridge pull-down sprayhead | Spray, stream, sweep | Quick connect sprayer hose | 1.8 gpm, 2.2 option |
| Delta Cassidy 9197T-DST | Pull-down wand | Stream, spray, ShieldSpray | MagnaTite magnetic | 1.8 gpm |
| Delta Essa 9113TV-DST | Pull-down wand | Aerated stream, spray | MagnaTite magnetic | 1.8 gpm |
| Moen Brecklyn 87557SRS | Pull-out spray wand | Two-function with Power Clean | Docked in spout | 1.5 GPM |
| Moen Align 7565E | Pull-down spray | Stream or spray, docked or drawn | Reflex system | 1.5 gpm |
| Kohler Sensate K-72218 | Pull-down sprayhead | Stream, Sweep spray | DockNetik magnetic | 1.5 gpm |
Kraus KPF-3121
Kraus’s sheet lists a three function sprayhead with spray, stream and sweep modes on a transitional bridge pull-down faucet, with a 360-degree swivel spout, brass construction and a lead free brass waterway. It is the only bridge-format faucet in this group.
The dimensions and ratings are fully printed: overall height sixteen inches, spout height seven and three-quarter inches, reach nine and three-eighths inches, flow of 1.8 gpm at 60 psi with a 2.2 gpm option in the box, three-hole installation and a quarter-turn ceramic disk cartridge. The Sweep mode is the Kraus take on the concentrated blade, a wide sheet of water for clearing plates and boards, and the sprayhead connects with a quick connect sprayer hose.
Choose the KPF-3121 if you want the broadest spray repertoire in a non-electronic faucet. The bridge format needs a compatible three-hole deck and rewards it with the most traditional silhouette in this group, plus the strongest material documentation of any model here.
The bridge layout deserves its own note: with handles flanking a central spout, the Kraus presents its sprayer as the fourth element of a composed deck, and the pull-down head keeps the bridge’s vintage outline while behaving like a modern wand. No other model in this series of roundups mixes those two eras as deliberately.
Delta Cassidy 9197T-DST
Delta’s Cassidy sheet lists a three-function wand, aerated stream, spray or ShieldSpray, on a Touch2O pull-down with MagnaTite magnetic docking and Touch-Clean spray holes, at a maximum flow of 1.8 gpm at 60 psi. It is Delta’s traditional-styled electronic entry in this group.
ShieldSpray is Delta’s answer to baked-on food: a concentrated stream inside a shield of water that contains the splatter while it works. The rest of the platform is equally documented, a diamond coated ceramic cartridge, a spout that rotates 360 degrees, one or three-hole mounting, an LED indicator, six AA or six C battery power and a sixteen-inch overall height with a nine and three-eighths inch spout.
Pick the Cassidy if your spray work is mostly dish rescue and you want touch control in the same faucet. Traditional styling hides the electronics, and the wand’s third function is the one most likely to be used daily in a household that cooks from scratch.
ShieldSpray’s shield is the detail that separates it from a plain pressure jet: the surrounding water contains the splash that a concentrated stream would otherwise throw across the sink. In practice that makes the mode usable on a half-full sink of dishes, not only on a single pan held under the head.
Delta Essa 9113TV-DST
The Essa’s sheet specifies a two-function wand, aerated stream or spray, with dual integral check valves in the sprayer, on a pull-down with Touch2O and VoiceIQ control, MagnaTite docking and Touch-Clean spray holes. It is the voice-controlled member of the six.
Its ratings match the Cassidy’s frame: maximum flow of 1.8 gpm at 60 psi, one or three-hole mounting, a diamond coated ceramic cartridge, a 360-degree spout rotation and a sixteen-inch height with a nine and three-eighths inch spout. The difference is control rather than spray: the Essa trades the third spray function for voice commands and touch, with an LED indicator reporting state, temperature and battery level.
Choose the Essa if the sprayer’s two classic modes cover your work and the control layer is where you want the sophistication. Households that pre-rinse heavy soil daily may prefer the Cassidy’s ShieldSpray; households that fill and rinse with full hands will use the Essa’s voice more.
The Essa’s wand also carries the Touch-Clean spray face, so the spray half of its two functions maintains itself with a fingertip wipe when mineral film narrows the pattern. On a faucet bought for its electronics, that small mechanical kindness keeps the sprayer feeling new after the novelty of voice control settles into routine.
Moen Brecklyn 87557SRS
Moen’s Brecklyn listing names a pull out spray wand feature and a Power Clean spray function on a single-handle pull-out faucet, with a flow rate of 1.5 GPM and a two-function spray wand confirmed on its current listing pages. The model is a current Moen line, listed in stock by its sellers.
The specification table gives a faucet height of 10.16 inches, a 120-degree spout swivel, single-handle control and a hole fit of three hole or single hole, in a Spot Resist stainless finish. Power Clean is Moen’s higher-force spray mode, aimed at rinsing speed rather than delicacy, and the pull-out format keeps the whole faucet low and compact compared with the high-arc pull-downs around it.
Pick the Brecklyn for a smaller sink or a lower profile: it is the only pull-out here, the shortest faucet in the group, and its spray wand covers close rinsing work without a tall arc over the deck. Under-cabinet sinks and window-adjacent decks both benefit from that restraint.
The pull-out format has one more quiet advantage: because the spout is short, the wand’s hose run is short too, so the head draws out and returns with less slack to manage under the sink. In compact cabinets where the hose shares space with a disposal and cleaning supplies, that shorter loop is a genuine daily convenience.
Moen Align 7565E
Moen’s Align sheet states that the pulldown spray operates in stream or spray mode in the pulldown or retracted position, a small line with a real consequence: the spray works while the head is still docked, not only when drawn out. No other sheet in this group makes that point.
The faucet around that sprayer is the MotionSense model: Wave and Ready sensors plus a handle for control, a Reflex pulldown system with a 68-inch braided hose, Power Clean spray technology, a 1255 Duralast cartridge, metal construction, flow limited to 1.5 gpm at 60 psi, one-hole installation with an optional escutcheon, a 100-degree spout rotation and a height of fifteen and five-eighths inches.
Choose the Align if you want the sprayer and the activation to both feel futuristic. The docked-spray detail suits cooks who rinse produce at the spout without drawing the wand, and the sensor system keeps hands off the faucet entirely during messy prep.
The Align’s 100-degree spout rotation is the one figure to check against a wide sink: it is a narrower swing than the 360-degree Delta spouts, traded for the sensor housing’s design. The 68-inch hose covers the corners the swing cannot, so the working coverage ends up comparable in a standard double-bowl layout.
Kohler Sensate K-72218
Kohler’s Sensate sheet lists a two-function pull-down sprayhead with touch control that switches from stream to Sweep spray, where Sweep creates a wide, forceful blade of water, on a touchless faucet with DockNetik magnetic docking inside the spout itself.
The supporting systems are all printed: a Response sensor reacting in twenty milliseconds, a ProMotion braided hose with a ball joint, a MasterClean sprayface, ceramic disc valves, temperature memory, an LED readiness light, AC-powered operation with no batteries, premium metal construction, single-hole installation, a maximum flow of 1.5 gpm at 60 psi and a spout reach of eight and seven-sixteenths inches.
Pick the Sensate if the sprayer should never need a hand at all: wave to start, sweep the dish, wave to stop. It is the cleanest workflow in this group for raw-meat and dough days, provided an unswitched outlet waits under the sink.
The Sensate’s sprayhead also carries the MasterClean sprayface, which matters more on a touchless faucet than most: a spray face you can wipe clean without triggering the sensor’s workflow keeps maintenance as hands-off as operation. Kohler’s sheet pairs the two ideas deliberately, hygiene in use and hygiene in upkeep.
Buying guide for kitchen sink faucets with sprayer
An integrated sprayer is a system of head, hose, dock and modes. Judge the four parts in that order: how many functions the head runs, how the hose behaves, how the head docks, and how the whole assembly fits your deck and your household water pressure.
Two functions or three
The standard pair, stream and spray, covers filling and rinsing, and three of the six here, the Essa, Brecklyn and Sensate, build their sprayers around two modes with a force twist: Power Clean on the Moen, Sweep on the Kohler. The three-function models, Kraus and Cassidy, add a dedicated concentrated mode instead.
Decide by soil, not by count. Households that mostly rinse produce and fill pots will never miss a third mode; households that scrape casseroles and sheet pans weekly will use Sweep or ShieldSpray constantly. The mode names differ by maker, but the job, a focused blade or jet for stuck food, is the same.
Switching feel matters too: the Sensate changes modes by touch control on the head, the Deltas by a wand toggle, and the Kraus at its sprayhead. A switch you can work with wet, soapy hands without looking is worth more than a fourth mode you would rarely select, which is why this group stops at three.
Hose length and behavior
The hose decides how far the sprayer truly reaches. Moen prints the Align’s at 68 inches of braided hose, Kohler builds the Sensate’s around a ProMotion braided hose with a swiveling ball joint, and Delta fits free-moving hose weights on its pull-downs so the wand travels without snagging.
Under the sink, the same rule as any sprayer applies: keep the loop clear of stored bottles and the disposal body. A hose that hangs free draws out smoothly, docks positively and wears slowly; a hose that fights the cabinet contents does the opposite on all three counts, whatever the sheet promises.
Weight placement is the installer’s detail: Delta’s free-moving weight travels with the hose rather than hanging at one fixed point, which keeps the pull even along the whole draw. When you test a floor model, draw the wand fully out and let it return; that single motion tells you more about the hose system than any specification line.
While you are under the sink for that check, run a hand along the hose itself: chafe marks against a sharp cabinet edge or the disposal housing tell you exactly where to add clearance or a guard before the braid wears through.
Docking systems
Docking is where integrated sprayers age visibly, so the makers brand it: MagnaTite magnetic docking on the Deltas pulls the wand home and holds it, DockNetik does the same inside the Kohler spout, and Moen’s Reflex system is built around smooth extension and secure docking on the Align.
The Brecklyn’s pull-out docks by seating into its low spout, the simplest arrangement here. Whichever system you choose, the test is the same after a year of use: the head should still sit flush and stay put when the water runs, without a guiding hand from you.
Magnetic docking has a second benefit that shows up in busy kitchens: the head can be pulled free with a full hand and returned one-handed, because the magnet does the final alignment. On faucets without it, docking is a two-step aim that gets old by the second week of ownership.
Flow and deck fit
Flow splits the group into 1.8 gpm models, the Kraus, Cassidy and Essa, and 1.5 gpm models, the Brecklyn, Align and Sensate, with the Kraus adding a 2.2 gpm option in the box. Spray force follows those ceilings, tempered by each maker’s sprayface design, so a well-shaped 1.5 gpm spray can feel stronger than a plain 1.8.
Deck fit is the final gate: the Kraus needs three holes in bridge spacing, the Sensate and Align are one-hole designs with optional escutcheons, the Deltas take one or three holes, and the Brecklyn fits single or three-hole decks. Measure first; the sprayer you want has to mount on the sink you own.
Pressure is the last variable: on a low-pressure home, the 1.8 gpm models preserve more of their rated spray force, while the 1.5 gpm models were designed around conservation targets and shape their sprayfaces accordingly. Either group works; matching the faucet’s rating to your home’s pressure makes the spray feel as the maker intended.
FAQ
Four questions cover the integrated sprayer decisions that matter: how it differs from a side sprayer, whether the third spray mode is worth having, what keeps a docked head seated over time, and whether a sprayer works while it is still docked in the spout.
How is an integrated sprayer different from a side sprayer?
An integrated sprayer lives in the spout, draws out on a hose, and docks into the faucet, while a side sprayer is a separate wand in a separate deck hole. The integrated design needs no extra hole and keeps one silhouette; the side sprayer aims independently of the spout. A separate roundup covers side sprayers, with no models repeated here.
Is a third spray function worth choosing?
For heavy-soil households, yes: the Kraus Sweep and the Delta ShieldSpray exist to clear stuck food without soaking, and their makers document them as headline features. For lighter kitchens the two-function wands here, especially the force-tuned Power Clean and Sweep designs, cover the work. Judge by your worst weekly dish, not your average one.
There is a rinsing-technique dividend as well: a blade or concentrated mode lets you work a pan in sections, clearing one area at a time instead of flooding the whole surface, which keeps the sink cleaner and the job shorter. Cooks who batch-cook on weekends feel that difference more than anyone.
What keeps a spray head docked over the years?
The docking system and the hose: magnetic systems like MagnaTite and DockNetik hold the head with a positive pull, while a free-hanging hose loop stops the hose from pushing the head out of its seat. Most docking complaints trace back to a snagged hose under the sink rather than to the magnet itself, which is why the hose advice above matters.
A monthly ten-second check keeps the system honest: draw the head out, let it return, and watch whether it seats flush on its own. If it starts to hesitate, the cause is almost always under the sink, a shifted weight or a new bottle in the hose’s path, and the fix takes a minute rather than a service call.
Can the sprayer run while it is still docked?
On the Moen Align, yes by specification: its sheet states the pulldown spray operates in stream or spray mode in the pulldown or retracted position. On most pull-downs the modes are designed for the drawn-out wand, so treat the Align’s docked operation as a documented exception worth choosing if you rinse at the spout often.
Docked operation also changes how the faucet handles small jobs: a quick rinse of a mug or a colander of herbs happens at the spout with the spray pattern already selected, no drawing, no docking, no dripping wand over the counter. It is a small workflow, repeated many times a day, and it is the kind of detail that separates a thoughtful sprayer design from a merely present one.
Conclusion
The integrated sprayer has become the default kitchen arrangement because it asks nothing of the deck and gives a rinsing head on demand. These six document their sprayers: Kraus and Delta with three functions, Moen with force-tuned pull-out and sensor designs, Kohler with a touchless Sweep. Count the modes, check the dock, and match the deck.