Updated Nov 16, 2026· 15 min read

Key takeaways

  • Six kitchen faucets with separate sprayer designs compared on flow rate, hole count, hose length and valve type, from two-handle classics to modern levers.

A separate sprayer keeps the rinsing wand on its own hose beside the faucet, so the spout stays fixed while the spray travels. This guide compares six kitchen faucets with separate sprayer setups, using the flow rates, hole counts and hose lengths each maker states, so you can match a model to your deck.

Quick verdict

A separate sprayer suits cooks who rinse at the corners of the sink and beyond it, because the wand lives on its own long hose instead of inside the spout. The six models below split into two-handle classics and single-lever designs, with stated flow from 1.8 to 2.2 gpm and hole layouts from three to four holes.

Product Type Best for Key spec Main limit
Pfister Pfirst G135-5000 Two-handle, white side spray Classic four-hole decks 1.8 GPM, washerless valves White sprayer fixes the look
Glacier Bay HD67794-1008D2 Two-handle with side sprayer Standard 8 in centers 1.8 gpm, 8 5/16 in reach Needs a four-hole sink
Pfister Sonterra F-036-4SNC Two-handle high arc Tall pot clearance High arc, deck plate included Maker lists no flow or sizes
Delta Signature 440-WF Single handle, Quick Snap sprayer Long 45 in sprayer hose 1.80 gpm, 360 degree spout Older sheet, ball-type control
Moen Chateau CA87520 Single lever with side spray Strongest stated flow 2.2 gpm max, metal body Three holes at 4 in centers
Delta Classic 400-DST Single handle, DIAMOND Seal Modern valve, classic layout 45 in hose, 180 degree spout Sheet states no flow rate

How we selected

Each model here earned its place from a maker specification sheet or a detailed listing that states a separate side sprayer in plain terms. A faucet counted only when its page names the side spray, the vegetable sprayer or the spray attachment as part of the model, and when the same page states the hole layout the sprayer needs.

Pull-down and pull-out faucets were left out on purpose, because their sprayers live inside the spout and belong to a different comparison. Prices and ratings play no part. The ranking rests on stated flow rate, spout reach and swing, hose length, valve type, handle layout and warranty terms exactly as each maker prints them, and models that a maker has flagged as discontinued were excluded.

Six kitchen faucets with separate sprayer to consider

The six models below cover the separate-sprayer format from both directions: traditional two-handle sets with a sprayer on the fourth hole, and single-lever faucets that park the sprayer beside a modern valve. Each entry states who the faucet suits, the specifications the maker publishes, and the limits to weigh before ordering.

Pfister Pfirst G135-5000

The Pfirst is the traditional pick, a two-handle faucet with a white side spray that matches period kitchens and rental-grade remodels alike. The maker specification sheet lists the 5000 group with a white side spray, blade handles and a 4-hole installation, and the line also fits 3 or 4-hole decks across the series.

The sheet states a 1.8 GPM flow rate and 1/4 turn washerless valves, the cartridge style Pfister uses across the Pfirst line, with metal supply nuts included. The finish code is PC, polished chrome, on the faucet body, while the sprayer itself is white, a two-tone look that suits white or almond sinks better than stainless ones. The maker lists IAPMO, CSA and ASME certification and ADA compliance for the lever handles, and the faucet is covered by the Pforever Warranty.

Two handles give separate hot and cold control with a familiar feel, and the quarter-turn valves shut off with a short throw, which older hands often prefer. The trade-off is deck space: handles, spout and sprayer together ask for a wide, clear deck, and the white sprayer fixes the color story of the whole set.

Pros: classic layout with a full-size separate sprayer; quarter-turn washerless valves; Pforever Warranty; ADA compliant handles. Cons: white sprayer limits finish matching; four holes to fill on most decks. Buy if your sink has four holes and a traditional look. Skip if you want a single-lever faucet or a sprayer that matches a stainless finish.

Glacier Bay HD67794-1008D2

This Glacier Bay model is the straightforward four-hole pick, described by its maker as a 2-handle standard kitchen faucet with side sprayer in stainless steel. The specification sheet is unusually complete for the format, which makes it the easiest model here to plan a deck around before anything is ordered.

The maker states a maximum flow rate of 1.8 gpm at 60 psi, a spout reach of 8 5/16 inches and a spout height of 8 1/16 inches. The sheet requires a 4 hole sink with 8 inch on-center spacing, lists a ceramic valve and a zinc lever handle, and states ADA compliance. The warranty is a limited lifetime warranty. Those figures describe a standard-height spout rather than a high arc, so tall stockpots fill at the sprayer or not at all.

The ceramic valve is the quiet advantage: it is the same valve family the bigger brands use, in a faucet that keeps the two-handle layout many households still prefer. The side sprayer covers the rinsing work the modest spout cannot reach, from sheet pans to the far corners of a double basin.

Pros: full stated dimensions and flow; ceramic valve; stainless steel finish; limited lifetime warranty. Cons: standard spout height limits pot filling; strictly a four-hole installation. Buy if your deck is a standard four-hole, 8 inch center layout. Skip if you need high-arc clearance under the spout for tall cookware.

Pfister Sonterra F-036-4SNC

The Sonterra is the high-arc pick in this two-handle group. The listing names it a double handle deck-mount high arc kitchen faucet with sprayer, states that the side sprayer is included, and lists a deck plate in the box, finished in polished chrome. For buyers, the headline is the tall spout shape paired with a classic sprayer beside it.

One honesty note matters here: the opened listing does not print a flow rate or dimensions for this model, so none are claimed in this guide. What the listing does establish is the format, two handles, deck mount, high arc spout, included side sprayer and included deck plate. Buyers who need exact reach or height figures should weigh the other five models, whose makers publish those numbers, or treat this one as a style-first choice.

Within those limits, the Sonterra fills a real gap in this roundup: it is the only two-handle model here whose spout is described as high arc, which is the shape that clears stockpots and stacking bowls. The deck plate also softens the install on decks with extra holes to cover.

Pros: high arc spout with a separate sprayer; deck plate included; polished chrome finish; two-handle control. Cons: no flow rate or dimensions on the listing; sprayer style is fixed by the set. Buy if the tall spout shape matters most and your deck suits a deck plate. Skip if you plan the purchase around exact reach, height or flow figures.

Delta Signature 440-WF

The Signature is the single-handle veteran of the group, from Delta’s long-running Signature series. The maker specification sheet lists a single handle deck mount faucet for 3 and 4 hole sink applications, with a solid brass fabricated body, and it pairs that modern layout with a traditional separate sprayer on a generous hose.

The sheet states the Quick Snap vegetable sprayer hose with matching finish sprayhead on the 440 series at 45 inches long, the joint-longest sprayer hose in this group. The spout measures 9 1/16 inches and swings 360 degrees, the widest swing stated here, and the maximum flow is 1.80 gpm at 60 psi. The control mechanism is a rotating stainless steel ball type with replaceable non-metallic seats, and models with a spray attachment carry an anti-siphon device as an integral part of the valve body. The warranty is a lifetime limited warranty on parts and finishes.

The ball-type control is older technology than the ceramic cartridges around it, but it is also a design with decades of parts support behind it, and the seats are replaceable. For a household that keeps faucets for a long time and repairs rather than replaces, that serviceability is a genuine argument.

Pros: 45 inch sprayer hose; full 360 degree spout swing; solid brass body; lifetime warranty on parts and finishes. Cons: ball-type control instead of a ceramic cartridge; the sheet is an older revision. Buy if you want a single lever with a long-reach separate sprayer. Skip if you prefer the newest cartridge technology in the valve.

Moen Chateau CA87520

The Chateau is the strong-flow pick, a single-lever faucet from one of Moen’s longest-running lines, with side spray versions available in the series. The maker specification sheet lists metal construction throughout, which is not a given at this end of the market, and a lever handle that operates with less than 5 pounds of force.

The sheet states a maximum flow of 2.2 gpm, the highest figure in this group by a clear margin, useful for filling big pots quickly at the spout. Depending on version, the valve is a 1255 Duralast cartridge or a 4000 ceramic disc, both current Moen designs. Installation is through 3 holes at 4 inches on center, the sheet lists Hydrolock quick-connect fittings, and the faucet is certified to ASME A112.18.1 and CSA B-125.1 with the side spray configuration named in the certification. The warranty is a lifetime limited warranty.

The 4 inch centerset layout is the constraint: this is a compact three-hole footprint, not a widespread deck. On the right sink it looks tidy and the lever sits close to the spout. On a wide four-hole deck it leaves a hole to cover with a soap dispenser or a plug.

Pros: highest stated flow at 2.2 gpm; metal construction; light lever effort; lifetime limited warranty. Cons: compact 4 inch centerset only; sprayer version must be specified when ordering. Buy if fast filling matters and your deck is a three-hole centerset. Skip if your sink is drilled for a wide four-hole layout with 8 inch centers.

Delta Classic 400-DST

The Classic is the modern-valve pick, bringing Delta’s DIAMOND Seal technology to the separate-sprayer format. The maker specification sheet lists a single handle deck mount faucet for 3 and 4 hole applications, with integrated supply tubes that simplify the connections under the sink.

The sheet states an 8 11/16 inch spout that swings 180 degrees and a diamond coated ceramic cartridge, the current Delta valve design. The sprayer equipment matches the Signature above: a vegetable sprayer hose with a matching finish sprayhead, 45 inches long, and spray-attachment models carry an integral anti-siphon device. The warranty is the Lifetime Faucet and Finish Limited Warranty. One gap to note: the sheet’s flow information appears only as a chart, so no gpm figure is claimed for this model in this guide.

Between the two Delta models here, the Classic is the one to pick for the valve. DIAMOND Seal is the maker’s current platform, built around the ceramic cartridge, while the Signature counters with a longer track record and a wider spout swing. Both give the same 45 inch sprayer hose, so the choice comes down to control feel and swing range.

Pros: current DIAMOND Seal valve; 45 inch sprayer hose; integrated supply tubes; lifetime warranty. Cons: no stated flow rate figure; 180 degree swing is half the Signature’s. Buy if you want the separate sprayer with Delta’s current cartridge platform. Skip if a printed flow rate matters in your comparison.

Buying guide

A separate sprayer is a format decision before it is a brand decision: the sprayer needs its own hole, its own hose routing and a diverter inside the faucet body. The five checks below use the figures and features the makers of these six models publish, so you can judge any separate-sprayer faucet with the same yardsticks.

Hole layouts for kitchen faucets with separate sprayer decks

Count your holes first, because the sprayer always takes one. The models here ask for four holes, three holes at 4 inch centers, or three to four holes with the sprayer on the last one. A four-hole deck is the natural home for this format: hot handle, cold handle or lever body, spout and sprayer each get a drilling, with nothing left open.

If your deck has fewer holes, the options narrow fast. A three-hole centerset model exists in this group, but a one-hole or two-hole sink cannot take a separate sprayer without drilling, and drilling stone or fireclay is a professional job. Deck plates cover extra holes on some layouts, yet a plate cannot create a sprayer hole where none exists. Measure the spacing too: 8 inch centers and 4 inch centers are different worlds.

Hose length and sprayer handling

The hose is the reason this format exists, so length deserves attention. Two models here state a 45 inch sprayer hose, long enough to rinse a roasting pan at the end of a double sink or fill a bucket on the floor beside the cabinet. Where a maker does not state the hose length, assume in-sink work until you can measure the display model.

Handling matters as much as length. A sprayer that matches the faucet finish looks deliberate on the deck, and a holster that holds the wand upright keeps it from flopping into the basin. Quick-connect fittings, named on one sheet here as Quick Snap and on another as Hydrolock, decide how painful a future hose replacement will be, because sprayer hoses are the wear item of this format.

Flow rate and filling speed

Stated flow in this group runs from 1.8 gpm to a maximum of 2.2 gpm at 60 psi, one model printing no figure. The gap sounds small and feels real at a stockpot: the stronger faucet fills a large pot noticeably sooner, and pushes the sprayer harder for rinsing. If your household fills big vessels daily, the 2.2 gpm model earns its place.

Flow at the sprayer is a separate question the sheets rarely answer directly. The diverter sends water to the wand when its trigger is pressed, and the anti-siphon devices listed on two sheets here protect that path. Where no flow figure is printed, treat the omission as a prompt to ask the maker, not as a number to guess, and weigh the models with published figures more heavily.

Valve type and long-term service

Four valve designs appear across these six spec sheets: quarter-turn washerless valves, a ceramic valve, ceramic disc cartridges from two brands, and a rotating ball control with replaceable seats. Ceramic discs are the current default for a reason, smooth action and long service, but the older designs counter with cheap, widely stocked parts.

The practical question is who will service the faucet in ten years. Cartridge models swap a single sealed unit, which suits most owners. The ball design asks for small seats and springs, fiddly but inexpensive. Washerless quarter-turn valves sit between the two. Every model here carries a lifetime or Pforever class warranty on the faucet, so the valve choice is about convenience, not coverage.

Handles, swing and daily ergonomics

Handle layout shapes every interaction. Two-handle sets give precise temperature mixing and a traditional look, at the cost of a second hand when yours are full. Single levers answer with one-hand control, and one maker here states a lever effort of less than 5 pounds, a detail that matters for weaker grips and for nudging the handle with a wrist.

Spout swing is the other daily number: 360 degrees on one model here, 180 degrees on another. A full swing parks the spout over either basin of a double sink or out of the way entirely, while a half swing keeps it in front of you. Pair the swing with the sprayer hose and you have the real working envelope of the faucet, which is the figure of merit this whole format stands on.

FAQ

Separate sprayers are an older format than pull-down wands, so buyers often ask how the layout, hoses and valves compare before committing a deck hole to one. The answers below rest on the specification sheets of the six models in this roundup and on general points that apply to any faucet with a side sprayer.

Do kitchen faucets with separate sprayer need a fourth hole?

Usually, yes: the sprayer sits in its own deck hole beside the faucet, and most two-handle sets use four holes in total. But the format is not rigid. One model here installs through 3 holes at 4 inch centers with the sprayer in the third hole, and the single-handle models here fit 3 and 4 hole applications, using the extra hole for the sprayer.

If your sink has exactly three holes in a wide layout, check the spacing before assuming a fit, because centerset and widespread drillings differ. If you have a spare hole you do not want to use, a deck plate or a soap dispenser can cover it on some models. The hole count printed on the spec sheet, not the product photo, is the figure to trust when you order.

Is a separate sprayer better than a pull-down sprayer?

Each format wins somewhere. A separate sprayer keeps its own long hose, 45 inches on two models here, and it works while the spout stays parked, which is handy for filling a kettle on the counter while the basin runs. A pull-down wand keeps everything in one drilling and docks in the spout, which suits minimal decks and one-hole sinks.

The honest tie-breakers are your deck and your habits. Four holes already drilled argue for the separate sprayer; a single-hole stone sink argues against drilling it. Households that rinse large trays beyond the sink edge use the separate hose fully. Households that rinse only inside the basin gain little from it, and give up nothing by choosing a pull-down instead.

Can a side sprayer be added to a faucet later?

Only if the faucet body was built for one. A separate sprayer needs a diverter port inside the faucet and a free deck hole, and neither can be added to a faucet that lacks them. The sheets here show the sprayer as part of the model definition, a spray version of a series or a spray attachment model, not as an accessory bolted on afterwards.

That is why the ordering detail matters: on series with spray and non-spray versions, the sprayer version must be the one in the cart. If you are replacing an old faucet that had a side sprayer, the simplest path is another sprayer model from this list, since the hole and the hose routing already exist under your sink.

What wears out first on a separate sprayer faucet?

The sprayer hose and diverter do the hardest work in this format, flexing under pressure at every rinse. Quick-connect systems on two models here make hose swaps a hand-tool job, and makers list the hose as a defined part, 45 inches with a matching sprayhead, not a generic tube. The valve, by contrast, is the longest-lived part on every sheet here.

Warranty terms reflect that split: the faucets carry lifetime-class coverage on parts and finishes, while hoses live a shorter practical life in daily service. When you compare models, a stated hose length and a named connection system are good signs, because they mean the maker expects the part to be replaced and has made that job straightforward.

Does a separate sprayer change the flow rate?

The printed flow rate describes the faucet: 1.8 gpm on three models here, 2.2 gpm maximum on one, and no figure printed for two. Pressing the sprayer trigger diverts that water to the wand, so the sprayer shares the faucet’s supply. Expect a firm jet from a small sprayer head even at modest flow, since the head concentrates the water.

Two sheets here also note an anti-siphon device built into spray models, which protects the water supply when the sprayer sits below the rim in a full sink. It does not change the flow you feel. For filling speed, compare the spout figures; for rinsing power, the sprayer head design matters more than a tenth of a gallon either way.

Conclusion

Choose the Chateau for flow, the Signature for its long hose and full swing, or the Glacier Bay for fully stated dimensions. The Pfirst suits classic four-hole decks, the Sonterra brings the high arc, and the Classic brings the current Delta valve. Match holes first, then pick your faucet. Measure the deck, then choose.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.