Updated Nov 16, 2026· 15 min read

Key takeaways

  • Six kitchen faucets with side sprayer, verified from maker documents: Moen, Delta, GROHE, Glacier Bay and Kingston Brass picks with hole counts and flow rates.

Side sprayers put a rinsing wand on its own deck hole, and this guide to kitchen faucets with side sprayer covers six current models, from a four-hole Moen with a dispenser to a brass-spray GROHE bridge, with hole counts and flow figures checked for each, plus sprayer hose lengths where makers publish them.

A side sprayer is the original kitchen helper: a separate wand on its own hose, mounted in the fourth deck hole beside the faucet, ready to rinse the sink corners a fixed spout cannot reach. The format survives because four-hole sinks are everywhere and because a detached wand aims exactly where you point it. This roundup gathers six faucets whose makers still build the layout, from a traditional two-handle bridge with a brass sprayer to single-lever models that bundle a soap dispenser into the same deck plan.

Every pick below earns its place from its maker’s own documents: hole counts, flow ratings, sprayer construction and valve types are quoted only where the maker states them. The six split into two camps, single-handle faucets that keep the deck simple and two-handle designs that suit traditional kitchens, and they span centerset, widespread and bridge footprints. Read the per-model notes, then use the closing guide to match hole count, sprayer build and hose routing to your sink.

Quick verdict

Every model in this roundup ships with a side or separate sprayer in the box, and each maker publishes the numbers that matter: hole count, flow ceiling and sprayer build. The Moen Muirfield leads on extras, the GROHE Bridgeford on materials, and the Glacier Bay on published dimensions.

Start with the Muirfield if the deck needs a sprayer and a dispenser at once, since its sheet lists both in the box contents. Choose the Bridgeford if a brass sprayer matters, because GROHE builds the spray from brass like the body. Pick the Glacier Bay HD67794-1008D2 if you want every dimension in writing before you buy, or the Kingston Brass KS821C if the deck is drilled widespread and hose length decides the purchase.

Two patterns run through the six. First, the sprayer is never an afterthought: each maker engineers the deck plan, the diverter and the hose around it. Second, the published numbers cluster tightly, with four-hole footprints and 1.8 or 2.2 gpm ceilings covering nearly every model, so the real separators are sprayer build, valve design and finish range rather than raw output.

How we selected

A faucet only qualified here if its maker’s own document states that a side or separate sprayer is included, and only specifications printed on that document are used in its profile. Models whose sprayer was an unverified add-on or a marketplace claim were left out of the six.

The six that remain cover the ways the format is still built: single-handle and two-handle, centerset and widespread and bridge, flow ceilings of 1.8 and 2.2 gpm, and sprayers in brass, metal construction and standard builds. Where a maker’s sheet omits a figure, the profile says so rather than estimating it, so the comparison stays honest from model to model.

Availability was treated as part of the specification: each model is a current catalog design from its maker, not a discontinued pattern surviving on old stock. That matters with side sprayers, because replacement spray heads, hoses and cartridges are far easier to source for a faucet the maker still lists and supports.

Kitchen faucets with side sprayer: the six picks

Six faucets follow, each confirmed from its maker’s documents to include a side or separate sprayer. They range from a dispenser-bundling Moen single-handle to a widespread Kingston Brass, with flow ceilings from 1.8 to 2.2 gpm and footprints for four-hole and widespread decks.

Model Handles Mounting Flow ceiling Sprayer note
Moen Muirfield 87002 Single lever Four-hole deck 2.2 gpm aerator limit Side spray and liquid dispenser included
GROHE Bridgeford 20158000 Two, sold separately Four-hole bridge 2.2 gpm maximum Brass body and spray
Delta Foundations B4410LF Single handle Four-hole, 8-inch centerset Pressure chart on sheet Anti-siphon device in valve body
Glacier Bay HD67794-1008D2 Two lever handles Four-hole, 8-inch on-center 1.8 gpm at 60 psi Ceramic valve, side sprayer
Laural F8FA0066 Two lever handles Fits four-hole sinks 1.8 gpm maximum Side sprayer included, four finishes
Kingston Brass KS821C Single handle Widespread Not stated on sheet Sprayer on a 48-inch hose

Moen Muirfield 87002

Moen’s Muirfield 87002 series is the overachiever of this group: its maker’s specification sheet describes a single handle lever faucet with side spray and dispenser, and the box contents line reads includes side spray, hose and liquid dispenser, filling two spare deck holes in one purchase.

The faucet is metal construction, and its aerator is limited to 2.2 gpm maximum, the joint-highest flow figure in this roundup. Inside, a 4000 ceramic disk cartridge design handles temperature and volume control, the cartridge family Moen fits across its single-handle kitchen range. The sheet calls out a Hydrolock quick connect system for the water lines, which speeds the under-deck work, and the sprayer’s hose arrives as part of the listed contents rather than an accessory.

Choose the Muirfield when your four-hole deck needs both a sprayer and a dispenser and you would rather not mix brands to get them. The single lever keeps one-handed control, the metal build suits a busy family sink, and the 2.2 gpm ceiling serves cooks who fill stockpots often. Kitchens that want a bridge silhouette or a brass sprayer should read on to the GROHE below instead.

The bundle logic extends to installation day: one purchase fills the sprayer hole and the dispenser hole with matching components, so there is no second order and no finish mismatch between a faucet from one maker and a dispenser from another. For a full four-hole refresh in a single weekend, that completeness is the Muirfield’s strongest argument.

GROHE Bridgeford 20158000

GROHE’s Bridgeford 20158000 is the traditionalist: a four-hole bridge faucet whose specification sheet lists a brass body and spray, so the side sprayer is metal rather than plastic, paired with a StarLight Chrome finish and a spout reach of nine and a quarter inches.

The flow ceiling is a maximum of 2.2 gpm, matching the Muirfield at the top of this group, and the bridge layout mounts the handles and spout as separate deck pieces joined above the sink, the classic farmhouse arrangement. One planning note stands out on the sheet: handles are sold separately, with two handle references listed, so the order needs the faucet plus a handle set to be complete.

Pick the Bridgeford for a traditional or farmhouse kitchen where a plastic sprayer would look out of place. The brass spray carries the same material story as the faucet body, the reach covers deep double bowls, and the four-hole footprint drops onto standard decks. Shoppers who want everything in one box, handles included, will find the Glacier Bay and Laural below simpler purchases.

Bridge faucets also age gracefully in traditional kitchens because every component sits exposed on the deck, where handles, spout and sprayer can be serviced or swapped without disturbing the countertop. If the kitchen already has bridge-style lighting and hardware, the Bridgeford’s silhouette will look native rather than retrofitted.

Delta Foundations B4410LF

Delta’s Foundations B4410LF keeps the format simple: a single handle faucet with side spray on a four-hole, eight-inch centerset footprint, with a 360-degree swing spout that rotates a full circle to cover both bowls of a double sink from one mounting point.

The control mechanism is Delta’s rotating stainless steel ball type with replaceable non-metallic seats, and the sheet notes that all operating parts are replaceable from the top, a service-friendly layout for a long-lived deck. Models with the spray attachment carry an anti-siphon device as an integral part of the valve body, and the inlets are half-inch threaded male adapters. The maker’s sheet presents flow as a pressure chart rather than a single gpm figure, so no single flow number is claimed here.

The B4410LF suits a straightforward four-hole replacement where the old faucet also had a side sprayer: the centerset footprint matches, the single lever modernizes control, and top-serviceable parts keep future maintenance simple. Anyone set on a ceramic cartridge should look at the Glacier Bay below, whose sheet names one outright.

The full-circle spout swing deserves emphasis for double-bowl sinks: with the faucet centered, the spout alone covers both bowls for filling, and the sprayer then handles the corners and the sink walls. That division of labor is exactly what the four-hole layout was designed for, and the B4410LF executes it with the fewest moving parts in this group.

Glacier Bay HD67794-1008D2

Glacier Bay’s HD67794-1008D2 is a two-handle standard kitchen faucet with side sprayer in a stainless steel finish, and its specification sheet is admirably complete: maximum flow of 1.8 gpm at 60 psi, spout reach of eight and five-sixteenths inches, and spout height of eight and one-sixteenth inches.

The sheet requires a four-hole sink with eight-inch on-center spacing and lists a maximum countertop thickness of one and three-sixteenths inches. Inside, a ceramic valve is specified for drip-free operation, worked by zinc lever handles, and the faucet carries a limited lifetime warranty with ADA compliance among its certifications. The moderate spout height suits sinks under cabinets or shelves where a high arc would crowd the space above the deck.

Choose this Glacier Bay for a traditional two-handle refresh with modern internals: the ceramic valve replaces the compression washers older two-handle faucets relied on, and the numbers for reach, height and deck thickness are all published before you buy. Decks without a fourth hole cannot host its sprayer, so single-hole sinks should look at pull-down models instead.

Its published deck-thickness limit is worth checking against stone counters with underlayment, which can exceed standard deck builds. Measuring the deck before ordering takes a minute and avoids the most common installation surprise with any four-hole faucet, this one included.

Laural F8FA0066

The Laural two-handle kitchen faucet, model F8FA0066, states its brief in four bullet points on its maker’s sheet: fits four-hole sinks, lever handle, side sprayer included, and 1.8 gpm maximum flow. It is the straightforward entry of the six, with a limited lifetime warranty behind it.

Finish choice is its distinction: the sheet lists Chrome, Stainless, Oil rubbed bronze and Matte black variants under separate model suffixes, the widest finish spread in this roundup, which helps match existing hardware in kitchens that are not chrome. The drawing dimensions put overall height at thirteen and five-eighths inches, a mid-arc profile between the low Glacier Bay and a full high-arc silhouette.

The Laural fits a four-hole deck that needs a sprayer and a specific finish more than it needs premium internals, and its lever handles keep operation simple for every age of cook. Buyers who want a named ceramic cartridge or metal sprayer construction have the Moen, Glacier Bay and GROHE above; buyers who want the finish to match the cabinet hardware will start here.

The four finishes also make the Laural the easiest model here to coordinate with a mixed-metal kitchen, since oil rubbed bronze and matte black options remain rare in this format. If the rest of the room already commits to one of those finishes, this is the sprayer faucet that will not clash with it.

Kingston Brass KS821C

Kingston Brass takes the format widespread with the KS821C, a single handle widespread kitchen faucet with sprayer whose maker’s drawing dimensions the layout: a nine-inch spout reach, a thirteen-inch overall height on the drawing, and a sprayer hose of forty-eight inches, the only hose length published in this group.

Widespread mounting separates the handle, spout and sprayer across the deck rather than gathering them on one plate, which suits larger sinks and stone counters drilled to a custom spread. The connections are half-inch NPSM, and the sprayer draws on its own forty-eight-inch hose, long enough to reach a pot sitting beside the sink or to rinse the far corner of an oversized single bowl.

Pick the KS821C when the deck is already drilled widespread or when hose length is the deciding factor for a big sink. Its maker’s sheet is a dimension document, so flow and valve details are not published there; shoppers who need a stated gpm figure before buying should weigh the Glacier Bay or Laural, whose sheets print one.

Widespread layouts also forgive imperfect decks: because each component mounts independently, minor drilling irregularities that would rock a one-piece plate disappear. On a custom stone counter with hand-finished holes, that tolerance is a genuine installation advantage.

Buying guide for kitchen faucets with side sprayer

Start with the deck, then weigh the sprayer itself, then match valves and handles to the household. The five checks below follow that order, using the figures these makers publish, so a four-hole plan, a sprayer build and a control style all line up before the faucet is ordered.

Count your holes first

Most side sprayer faucets need a four-hole deck, with the sprayer taking the fourth hole: the Moen, GROHE, Delta, Glacier Bay and Laural here are all four-hole designs, several on eight-inch centers. Measure the spread as well as the count, because a centerset plate and a widespread drilling are not interchangeable.

If the sink has only three holes, this format is effectively closed unless a hole is added, which is rarely worth doing in stone or enamel. Renters and three-hole owners are better served by pull-out and pull-down faucets, where the sprayer docks inside the spout and the deck keeps its existing drilling.

While measuring, note what the fourth hole currently holds. Many four-hole decks carry an old sprayer already, which makes the swap direct; others carry a dispenser or a filtered-water tap that would need a new home. Knowing the deck’s current occupants avoids a Saturday-morning surprise halfway through the installation.

Sprayer build and hose routing

The sprayer is the part you will hold every day, so its build matters: GROHE makes the Bridgeford spray from brass, Moen builds the Muirfield from metal overall, and Kingston Brass publishes a forty-eight-inch sprayer hose, long enough to work a pot beside the sink rather than only inside it.

Under the deck, keep the sprayer hose in a clear loop with nothing stored against it. A hose that snags on cleaner bottles or the disposal will tug at the wand and wear its jacket, while a free loop lets the sprayer draw out and settle back without help. Delta adds protection at the valve, building an anti-siphon device into the body on spray-attachment models.

Also consider where the sprayer points when docked. A sprayer that rests aimed at the sink wall wets the backsplash less than one aimed across the deck, and a holder that grips the wand firmly keeps it from drooping as the hose ages. These small geometry details decide whether the format feels tidy or cluttered after a year of daily use.

Flow ceilings from 1.8 to 2.2 gpm

Two flow camps appear in this group: the Glacier Bay and Laural cap at 1.8 gpm at 60 psi, while the Moen aerator and the GROHE sheet allow up to 2.2 gpm. The higher ceiling fills stockpots and soaking roasters faster; the lower one uses less water on everyday rinsing and is the common modern rating.

Delta presents the B4410LF output as a pressure chart rather than a single number, a reminder that real flow follows household pressure. If your home pressure is low, a 2.2 gpm ceiling preserves more of the available flow at the sprayer; if pressure is strong, the 1.8 gpm models feel identical for most tasks.

Sprayer flow follows the same ceiling logic: a wand rated under a 2.2 gpm faucet rinses sheet pans noticeably faster than one under a 1.8 gpm rating, especially on well systems where pressure already dips. Households that pre-rinse heavy bakeware daily will feel the difference more than households that mostly fill glasses and kettles.

Handles and valves

Single levers on the Moen, Delta and Kingston Brass give one-handed control of temperature and flow, which suits cooks carrying pans. Two-handle layouts on the GROHE, Glacier Bay and Laural give separate hot and cold levers and the traditional look many four-hole kitchens were built around.

Valve designs differ just as much. Moen names a 4000 ceramic disk cartridge and Glacier Bay a ceramic valve, both drip-resistant designs, while Delta’s rotating stainless steel ball mechanism has replaceable seats and parts that renew from the top of the deck. None of these is a wrong answer; they are different maintenance philosophies.

Handle placement matters at a crowded sink: single levers mounted on the faucet body keep the deck clear, while widespread and bridge handles claim their own deck positions. Households that park dish racks and cutting boards beside the faucet should count handle swing and lever travel as part of the layout, not as an afterthought.

Finish choices

Finish decides how the faucet sits with the rest of the kitchen. The Laural offers the widest spread here, Chrome, Stainless, Oil rubbed bronze and Matte black, while GROHE finishes the Bridgeford in StarLight Chrome and Glacier Bay lists its two-handle model in a stainless steel finish.

Match the sprayer as well as the faucet: on bundled models the sprayer shares the faucet finish, and on the GROHE the sprayer is brass under its chrome. A finish that matches the cabinet hardware and the sink material will look deliberate; a one-off finish rarely does, however good the faucet is.

Care follows the finish: chrome and stainless tolerate most gentle cleaners, while bronze and matte black finishes reward a soft cloth and mild soap over abrasive pads. Since the sprayer is handled constantly, expect it to show wear first, and choose the finish whose aging pattern you mind least.

FAQ

Four questions cover the points that decide most side sprayer purchases: how many holes the format needs, whether a sprayer can be added later, which sprayers here are metal, and what happens when sprayer flow weakens over time in a busy kitchen every day.

Do kitchen faucets with side sprayer models need four holes?

Generally yes: the sprayer takes its own deck hole beside the faucet, and five of the six models here are four-hole designs. The Kingston Brass spreads its components across a widespread drilling instead, which still gives the sprayer a dedicated hole of its own in the deck.

Can a sprayer be added to a faucet that lacks one?

Only where the faucet body has a sprayer port and diverter built in. The models here are engineered as sprayer faucets from the start, with Delta even integrating an anti-siphon device into the valve body for the spray attachment, so retrofitting a plain faucet is not a path these makers document.

Which sprayers in this group are metal?

GROHE’s Bridgeford lists a brass body and spray on its specification sheet, and Moen’s Muirfield is metal construction overall. Where a maker does not state the sprayer material, this guide does not guess it, so the per-model notes record exactly what each sheet claims and nothing beyond it.

Why does sprayer flow weaken over time?

The usual cause is sediment at the spray head or at the diverter that routes water to it. Running the faucet with the sprayer triggered after any plumbing work flushes debris through, and wiping the spray face clears mineral film from the outlets, which restores the pattern in most kitchens.

A monthly habit keeps it from getting that far: run the sprayer for ten seconds while you wipe the sink, which cycles fresh water through the hose and diverter and shows any weakening pattern early, while the fix is still a cleaning rather than a part. Sprayers that sit unused for months are the ones that clog first.

Conclusion

The side sprayer remains the most direct rinsing tool a deck can hold, and these six faucets keep it current: Moen adds a dispenser, GROHE builds the sprayer in brass, Delta services from the top, Glacier Bay and Laural cover the two-handle basics, and Kingston Brass stretches the hose. Match the hole plan first and it rewards you daily.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.