Key takeaways
- Six mixers for live performance compared on channels, buses, faders, and recording paths, from a 14-channel carry-on desk to a 64-channel flagship console.
Live sound punishes weak desks: feedback at soundcheck, a monitor mix short, a recording forgotten. These mixers for live performance run from a 14-channel carry-on unit to a 64-channel flagship, and each was picked for the work a show actually demands: inputs, buses, monitors, and a recording path.
How we selected these mixers for live performance
Performance mixing is judged in the moment: the desk must load in fast, give the band its monitor mixes, and stay predictable when the room fills. We read maker product pages and full dealer listings, then kept only the consoles whose own pages state the channel counts, bus structures, and recording paths quoted in this article.
Every pick is a current model sold for live work, from club and theatre desks to a touring flagship. Figures come straight from the pages we opened, and where a page disagreed with itself or with a sibling listing, the article says so and uses the conservative figure. None of these consoles was handled or heard by us; this is a paper comparison built on published specifications.
The spread is deliberate. The TouchMix-8 and DM3-D cover solo acts, duos, and small bands that mix from the stage or a tabletop. The StudioLive 32SC and Sonicview 16 serve working bands and small venues. The Avantis and WING sit at the top, with the channel counts, networking, and surface hardware for theatres, festivals, and touring productions.
Quick comparison
The table below lines up the headline figures for all six consoles: input channels, mix buses, faders, and the recording path each one offers. Use it to match a desk to your input list first, then read the detail sections for the monitor, networking, and control notes that decide how each console behaves during a show.
| Console | Input channels | Mix buses | Faders | Recording path |
|---|---|---|---|---|
| Behringer WING | 48 | 28 stereo (16 aux, 8 matrix, 4 main) | 24 motorized | Dual-SD recorder to 64 tracks, 48×48 USB |
| Allen & Heath Avantis | 64 | 42 configurable | 24 (6 layers) | Stereo record to internal storage, card options |
| PreSonus StudioLive 32SC | 32 (40 mix channels) | 26, incl. 16 FlexMix | 17 touch-sensitive motorized | 34-track SD recorder, 64×64 USB |
| TASCAM Sonicview 16 | 44 (40 mono + 2 stereo) | 22 flex + main L/R | 16 motorized + main | 32×32 USB, stereo SD, optional 32-track card |
| Yamaha DM3-D | 22 (16 mono + 1 stereo + 2 FX returns) | 6 mix, 2 FX, 2 matrix, 1 stereo | 9 motorized (8 + 1) | 18×18 USB, 2-track to USB stick |
| QSC TouchMix-8 | 14 | 4 aux outputs + main | None (touchscreen + encoder) | 14-track direct to USB hard drive |
Read the fader column with care. Two of these consoles trade physical faders for screens: the TouchMix-8 works entirely from its touchscreen and a rotary encoder, and the DM3-D spreads 22 channels across 9 faders. Engineers who mix with both hands on faders all night will weigh that differently from acts that set a mix at soundcheck and leave it.
The six consoles in detail
Each console below gets the same treatment: the channel and bus figures from its own pages, the processing and control surface it offers, its recording path, and the practical points a performer or engineer should weigh, such as how it expands, how monitors are handled, and what has to be added before the first show.
Behringer WING
The WING is Behringer’s flagship: 48 input channels arranged as 40 stereo input channels and 8 stereo aux channels, with 28 stereo buses split into 16 aux, 8 matrix, and 4 main buses. Every bus carries dual inserts, an 8-band parametric EQ, a stereo imager, and full dynamics processing.
Local inputs are limited to 8 Midas PRO mic preamps and 8 Midas PRO outputs on the surface; the rest of the I/O arrives over 3 AES50 ports carrying up to 144 inputs and outputs from stage boxes. A 10-inch capacitive touchscreen with an adjustable swivel anchors the surface, alongside 24 motorized 100 mm faders in 3 configurable sections and a touch-sensitive channel editing section.
Effects depth is the WING’s party piece. A premium FX rack runs 8 true-stereo processors with TC algorithms and Lexicon, Quantec, and EMT emulations, a standard rack adds 8 more true-stereo processors, and every input channel holds 5 variable plug-in slots drawn from emulations of well-known analog equalizers and compressors.
For live recording, a dual-SD card recorder captures up to 64 tracks with markers at song positions, and a 48×48 USB interface links to a DAW with HUI and Mackie Control remote emulation. An expansion port takes MADI and ADAT cards or an optional Waves SoundGrid or Dante/AES67 module for 64×64 network audio, and StageCONNECT provides a 32-channel interface for personal monitoring or analog I/O boxes.
Control details suit engineers who build a surface around their habits: a Custom Controls section provides 16 latching or momentary buttons and 4 rotary controls for preferred functions, and a separate 4-channel control section keeps permanent access to mains, matrices, or the channels that carry the show. Around the back, the surface adds AES/EBU stereo input and output on XLR, 8 balanced TRS auxiliary inputs and 8 outputs, 2 headphone connectors, MIDI in and out, 4 GPIO ports, and 2 Ethernet ports with an integrated switch for networked remote control.
Allen & Heath Avantis
The Avantis runs 64 input channels and 42 configurable mix buses on Allen & Heath’s 96 kHz XCVI FPGA core, with latency quoted at 0.7 ms. Twin 15.6-inch Full HD capacitive touchscreens with gesture control sit above 24 faders in 6 layers, giving 144 fader strips, and the Continuity UI ties the physical controls to what the screens show.
Onboard I/O is 12 XLR mic/line inputs and 12 XLR outputs plus stereo AES connections, so most inputs arrive through the SLink port from remote expanders. Two I/O ports each handle 128×128 channels at 96 kHz and accept Dante, MADI, gigaACE, Waves, SuperMADI, and fibreACE cards for splits and multitrack feeds.
Processing includes 12 RackExtra FX slots with dedicated stereo returns, 16 DCAs, and an automatic mic mixer covering up to 64 channels across 1, 2, or 4 zones. The optional dPack upgrade adds dLive processing, including 16 Dyn8 engines, DEEP compressors, and a Dual-Stage Valve preamp model.
Output tools match the input side: a 28-band third-octave graphic EQ, channel high-pass filters running from 20 Hz to 2 kHz, low-pass filters to 20 kHz, and delay adjustable up to 680 ms for aligning fill speakers with the main system. Twenty-four assignable SoftKeys put chosen functions under fingers, and metering uses multipoint peak detection across the surface.
Live details show the design brief: a 61-band real-time analyser with history views, integration with Shure and Sennheiser radio systems, internal storage for stereo playback and recording, and a family of apps. MixPad gives wireless control, OneMix locks a tablet to a single monitor mix for a musician, and Director allows offline show preparation on a computer. At 34 kg, the Avantis is a two-person lift and a fixed front-of-house position for most teams.
PreSonus StudioLive 32SC
The 32SC packs a 32-channel console into a subcompact, rack-mountable frame. It offers 40 mix channels and 26 mix buses, including 16 FlexMix buses that can each work as an aux, a subgroup, or a matrix. Sixteen recallable XMAX preamps sit behind 8 XLR inputs and 8 XLR/quarter-inch combo inputs.
A dual-core FLEX DSP engine runs 286 simultaneous processors, with Fat Channel plug-in models of vintage-style EQs and compressors on every input channel and mix bus, plus a four-slot FLEX FX processor. Seventeen touch-sensitive motorized faders and a 7-inch touchscreen run the surface, and every preamp and scene is fully recallable.
Recording is built for the working band: a 34-track SD card recorder captures 32 channels plus the main mix without a computer, and a 64×64 USB interface covers multitrack work with the included Capture software and Studio One Artist. Capture’s virtual soundcheck mode plays a recorded show back through the same channels, so the mix can be refined with no band on stage.
AVB networking ties the 32SC to NSB stage boxes and EarMix 16M personal monitor mixers, and multiple Series III mixers can share one network with digital patching between them. UC Surface software runs the desk from a computer or tablet, and QMix-UC puts monitor mixes on each musician’s phone. At 10.5 kg in a rack-mountable frame, this is the natural step up for bands that have outgrown a compact desk but still load in themselves.
Physical outputs cover a small venue without help: stereo main XLR outs, a mono sum XLR for a single centre cluster or a sub feed, 10 mix outputs split between 6 XLR and 4 quarter-inch sockets, and an AES/EBU digital output. DAW control runs the other direction, with the surface driving Studio One directly and emulating MCU for Logic and HUI for Pro Tools, so the same desk that mixed the show can drive the mixdown session the next morning.
TASCAM Sonicview 16
The Sonicview 16 is built around two touch panels, one above each bank of 8 motorized faders, with a motorized main fader beside them. Inside, a 54-bit floating-point FPGA engine running at 96 kHz mixes 44 input channels (40 mono and 2 stereo) plus 4 stereo FX returns through 22 flex output buses and the main L/R bus.
The VIEW interface shows each screen in one of three ways: a channel strip view of 8 adjacent channels, a module view of two parameter sets for one channel, or an individual view mixing functions freely. Each screen is configured independently, so meters can live on one side and drum EQ on the other.
Sixteen Class 1 HDIA mic preamps feed the console, with inputs that handle levels up to +32 dBu: 8 channels of XLR mic/line and 8 channels pairing XLR mic inputs with balanced TRS line inputs. Every input channel can use 11 processing functions, from delay and phase through a gate/expander/de-esser, a 4-band parametric EQ, and a compressor/ducker, and 8 DCAs group channels for broad moves.
Output buses carry a 31-band graphic EQ, a real-time analyser, a 4-band parametric EQ, a compressor/ducker, and delay. Dante is built in at 64 inputs and 64 outputs with redundant ports, AES67 and SMPTE ST 2110 support, and Dante Domain Manager compatibility. A 32-in/32-out USB interface, an onboard stereo SD recorder, and an optional 32-track SDXC recorder card cover capture, while SB-16D Dante stage boxes add 16 inputs and outputs at a time.
Two monitor buses, each with six switchable source presets plus mute and dim controls, serve the engineer and a shout or cue feed, and the monitor output can mute automatically when a microphone input is sensed. Talkback sources assign freely to any bus or output, 18 user-defined function keys put chosen settings on single buttons, and TASCAM’s control software for Windows, macOS, and iPadOS edits settings offline before the show and adjusts them live over a Wi-Fi router.
Yamaha DM3-D
The DM3-D is Yamaha’s most compact Dante console: 16 mono channels, 1 stereo channel, and 2 FX returns behind 9 motorized faders (8 channels plus a main) and a 9-inch multi-touch screen worked with a single Touch & Turn knob. It samples at up to 96 kHz and weighs 14.3 lbs, light enough for one person to carry with the PA.
Local I/O covers small stages directly: 16 mic/line inputs (12 XLR and 4 XLR/TRS combo) and 8 XLR outputs. Buses run to 1 stereo, 6 mix, 2 FX, and 2 matrix, with graphic EQ on the mix and stereo channels, and the matrix supports input-to-matrix routing for a separate feed to a delay fill or a recording.
Dante carries 16 inputs and 16 outputs over primary and secondary etherCON ports, pairing with the Tio1608-D I/O rack when the stage needs the inputs at the other end of one cable. USB gives an 18-in/18-out interface, 2-track recording straight to a USB stick covers the simple archive, and multitrack runs over USB or the Dante Virtual Soundcard.
Setup speed is the theme: QuickPro Presets tuned with major microphone and in-ear makers, Scene Presets for common applications, and an Editor for preparing the show in advance. StageMix controls the desk from onstage, MonitorMix lets each performer adjust their own monitor, user accounts can restrict operation for house systems, and the optional RK-DM3 kit rack-mounts the console for installed rooms. The console also works as a production tool between shows: DAW Remote turns its faders and buttons into a controller for recording software, Cubase AI is bundled for editing the recording, and VST Rack Elements hosts send-and-return plug-in effects inside the DM3 setup.
QSC TouchMix-8
The TouchMix-8 is the smallest desk here by a wide margin: 56 x 333 x 245 mm and 1.95 kg, with no faders at all. A capacitive touchscreen and a touch-and-turn encoder run 14 mixing channels (8 mic/line, 4 line, and a stereo USB input) through 12 physical inputs: 4 XLR/TRS combo, 4 XLR, and 2 stereo quarter-inch.
Outputs suit a small stage: 2 main XLR, 4 aux XLR for monitors, a stereo TRS that can serve as a line out or an in-ear feed, and a stereo cue output. Every mic and line channel carries a 4-band parametric EQ with shelving options, variable high- and low-pass filters at 24 dB per octave, a gate, and a compressor. Main and aux outputs add a third-octave graphic EQ, a limiter, and 4 notch filters.
The helpers are the point of this desk. Anti-Feedback and Room Tuning Wizards walk through the equalization work, a real-time analyser shows channel and room response, and 120 presets give starting points for common instruments and microphones. Simple mode shows only the essential controls; Advanced mode opens everything.
Grouping is fuller than the size suggests: 8 DCA groups with mutes and 8 mute groups organise a band’s channels, auxiliaries can double as subgroups, and cue listening switches between AFL and PFL. The desk samples at 44.1 or 48 kHz with 32-bit floating point processing, quotes a 105 dB dynamic range and -126 dBu equivalent input noise, and switches 48V phantom power per channel.
Four effects engines cover reverb, echo, delay, and chorus, with a pitch correct processor assignable to any mono input. Recording runs 14 tracks direct to a USB hard drive with no computer, MP3 playback comes from USB, and the iOS app mirrors the desk over the included Wi-Fi adapter. It ships with a carrying case, and 130 user scenes store whole shows for the next visit to the same room.
What mixers for live performance must survive on the road
A studio desk lives in one room; a performance desk is carried, cased, rained on at load-in, and run by whoever the venue provides. Beyond the channel counts, the points that decide a show are monitor capacity, a recording habit that costs no extra hands, and control that still works when the network or the tablet does not.
Monitors: aux counts and personal mixing
Monitor mixes are where compact desks run out first. The TouchMix-8 offers 4 aux outputs, the DM3-D offers 6 mix buses, and the Sonicview 16 offers 22 flex buses that can all serve as auxes. The StudioLive 32SC splits the difference with 16 FlexMix buses and an AVB path to EarMix 16M personal mixers, handing each musician a 16-channel mix.
Personal mixing changes the workload more than any single feature. Allen & Heath’s ME system runs from the Avantis SLink port and from the SQ range, PreSonus answers with EarMix over AVB, Yamaha’s MonitorMix app puts the DM3-D’s monitors on each performer’s phone, and the WING’s StageCONNECT interface feeds personal monitoring boxes. Every mix a musician runs personally is a mix the engineer does not have to build between songs.
Recording the show and virtual soundcheck
Recording used to need a splitter, an interface, and a laptop that someone remembered to start. These desks fold it in: the WING records up to 64 tracks to SD cards with song markers, the 32SC records 34 tracks to SD and 64 channels over USB, the Sonicview 16 adds an optional 32-track card, and the TouchMix-8 records its 14 tracks to a USB drive.
The payoff arrives the next day. Virtual soundcheck plays the recorded show back through the same inputs so the engineer can fix the mix in an empty room; PreSonus builds the mode into Capture and stores the mix scene with the session, and TASCAM and Behringer recordings serve the same routine through their USB interfaces. Bands that record every show also gain an archive for release material and a reference for the next visit.
Choosing mixers for live performance by venue size
Start from the input list and the monitor count, not the badge. A solo act with two inputs and one wedge is served by the TouchMix-8 and gains nothing from 64 channels. A theatre production with a pit band, radio microphones, and playback tracks needs the Avantis or WING class, where networking, scene systems, and surface hardware carry the show.
Faders versus screens
Physical faders still matter when several moves land at once: a chorus lift, a backing-vocal ride, and a playback fade in the same bar. The WING’s 24 faders in 3 sections and the Avantis’s 24 faders in 6 layers keep the most channels under fingers, while the 32SC’s 17 faders and the Sonicview’s 16 plus main cover a band’s core inputs directly.
Screen-first desks trade that reach for size and price of entry. The DM3-D’s 9 faders work because its shows are small and its layers are quick, and the TouchMix-8 removes faders entirely in favour of a screen, an encoder, and a tablet. Engineers who mix theatre cues or busy festival changeovers should count their simultaneous moves before choosing a surface.
Networking and stage boxes
Networking decides where the preamps live. AES50 carries the WING’s stage boxes, AVB carries the PreSonus ecosystem, Dante carries the Sonicview 16 and DM3-D, and SLink plus option cards carry the Avantis. All four schemes replace a heavy analog snake with one or two network cables and put the inputs on stage where they belong.
Redundancy separates the schemes in practice. The Sonicview’s dual Dante ports and the DM3-D’s primary and secondary etherCON connections run backup links, and the Avantis reaches Dante and other formats through its two 128×128 card ports. A venue that already owns stage boxes or a network from one family should treat that installed base as a strong reason to stay in the family.
Conclusion
Match the desk to the show you actually play. Solo acts and small bands travel lightest with the TouchMix-8 or DM3-D; working bands get the most from the 32SC or Sonicview 16; theatres and touring shows justify the Avantis or WING. Count inputs, count monitor mixes, confirm the recording path, and the right console usually picks itself.