Key takeaways
- Compare seven sewing machines for making clothes and quilts by stitch range, buttonholes, throat space, tables and feeding, with the limits each page states.
Garments and quilts pull a machine in two directions: clothing wants buttonholes and a good stitch range, while quilts want space and steady feeding. The best sewing machine for making clothes and quilts balances both, and this guide compares seven using maker or listing figures only, with limits stated.
Quick verdict
One machine rarely excels at everything, so the real question is which side of the work matters more to you. Machines with long stitch lists and many buttonholes lean toward clothing, while machines with wide throats, dual feed and large tables lean toward quilts, and a few try to do both well.
For a mix of both, the Brother HC1850 and CS7000X list wide tables with generous stitch counts, the Juki HZL-F600 lists 16 buttonholes with a long table, and the Janome Continental M7 and Brother BQ3100 lead on quilting space and dual feed. The Baby Lock Jazz II and Janome MC6700P are simpler options.
This guide repeats what pages state and promises nothing about how any machine will sew your fabrics. Try the machine with the cloth you really use, including a thin garment fabric and a thick quilt sandwich, before you decide.
Comparison table
The table below sums up each machine on stitch range, a key quilting spec, and the main trade-off. Where a maker or listing page does not publish a figure, the table says so, so you can see the gaps before you start comparing models in a store or online.
| Machine | Stitches and buttonholes | Quilting spec | Main trade-off |
|---|---|---|---|
| Brother CS7000X | 70 stitches, 7 buttonhole styles | Detachable wide table, walking foot | Throat space not listed |
| Brother HC1850 | 185 stitches, 8 buttonhole styles | Detachable wide table, quilting foot | Throat space not listed |
| Juki HZL-F600 | 225 stitches, 16 buttonholes | 23 inch by 13 inch table | 8 inch by 4.4 inch throat |
| Brother BQ3100 | 729 stitches, 14 buttonholes | Dual feed foot, 11.25 inch workspace | No table mentioned |
| Janome Continental M7 | 400 stitches | 13.5 inch throat, dual feed | Large and data is secondhand |
| Janome MC6700P | 200 stitches | 10 inch throat | Foot and table depend on bundle |
| Baby Lock Jazz II | 28 stitches | 12 inch workspace | Table and feet depend on bundle |
How we selected these machines
We looked for computerized or mechanical sewing machines that list real features for both garments and quilts: buttonholes, a useful stitch range, free-motion or drop feed, and a table or workspace for large projects. A machine that served only one task was left out.
Every figure here is repeated from the page we read, and where a page is silent the guide says that the maker does not state it. Two entries use a third-party database that cites the maker, and that is noted in the entries.
The writer is not a sewist or quilter and makes no hands-on claims. The list is not a ranking, because clothing and quilts mean different things to different makers. Prices and stock are left out on purpose since they change.
Ask a dealer about the feet that come in the box, the table that ships with each package, and what is optional, because several pages here say those details vary by bundle.
Sewing machines for making clothes and quilts: the shortlist
Each entry below covers who the machine suits, why it fits both clothes and quilts, the stated figures, limits, pros, cons and a buy-if or skip-if line. Where a page contradicts itself, the entry says so, and where a figure comes from a database, that is noted.
Brother CS7000X
The Brother CS7000X Computerized Sewing and Quilting Machine with Wide Table and 70 Built-in Stitches is a straightforward computerized machine. It suits a beginner who wants buttonholes, a free arm and a wide table for modest quilts all in one package.
Why it fits both: the page lists 70 built-in stitches, seven one-step auto-size buttonhole styles, a free arm for cuffs and sleeves, a detachable wide table, an automatic drop feed for free motion, and 10 accessory presser feet including walking and quilting feet. A 25-year limited warranty is listed.
Limits: the maximum speed is listed as 750 with no unit, and the page does not list throat space.
Pros: a walking foot, a free arm, a wide table, an LCD display and an automatic needle threader.
Cons: no throat figure, a modest stitch list, and a lower speed than some other machines.
Buy if you want a simple computerized machine for both jobs. Skip if you need a large listed throat.
Brother HC1850
The Brother HC1850 Computerized Sewing Machine with 185 Built-in Stitches and Wide Table is a mid-range computerized option. It suits a sewist who wants a bigger stitch menu, alphanumeric stitches and a wide table without paying for a quilting specialist.
Why it fits both: the page lists 185 built-in stitches including 55 alphanumeric, eight one-step auto-size buttonhole styles, and cites 170 stitch functions for garment construction, quilting and decorative sewing. A detachable wide table is included, and eight feet include buttonhole, zipper, zigzag, monogramming and spring action quilting feet.
Limits: the page lists a maximum speed of 850 with no unit and does not list throat space.
Pros: a large stitch list, a backlit LCD, an advanced needle threading system and a built-in stitch flip chart.
Cons: no throat figure and no walking foot named in the foot list.
Buy if you want many stitch choices for garments and a wide table. Skip if you need a stated throat or dual feed.
Juki HZL-F600
The Juki HZL-F600 Computerized Quilting and Sewing Machine pairs a long stitch list with a long table. It suits a sewist who wants electronic buttonholes and a knee lifter, and who is comfortable buying presser feet separately when a project calls for them.
Why it fits both: the page lists 225 stitches including 16 professional buttonholes and 4 lettering fonts, a 900 stitches per minute speed, a table of 23 inches by 13 inches, drop feed for free-motion quilting, an automatic needle threader, and three thread trimming methods.
Limits: the throat is listed as 8 inches by 4.4 inches, which is narrower than the wide-throat machines. The page does not say which presser feet come with the base machine, and feet are sold in packages such as the Bag Package and the Quilter’s Package.
Pros: many buttonholes, a long table, a knee lifter and a hard cover.
Cons: narrow throat and no named feet in the base package.
Buy if you want garment features with a long table. Skip if you want a wide throat for large quilts.
Brother BQ3100
The Brother Quilt Club BQ3100 Sewing and Quilting Machine is a feature-rich computerized machine aimed at quilters who also sew garments. It suits a sewist who wants dual feed, a big touchscreen and a large stitch library, and who will use the extras.
Why it fits both: the page lists 729 built-in stitches, 14 one-step auto-size buttonholes, a 7-inch LCD touchscreen, a Compact MuVit Digital Dual Feed foot, a pivot function, an automatic height adjuster, a knee lifter, a Sew Straight laser guide, and a generous 11.25 inch workspace for quilts.
Limits: the maximum speed is listed as 1050 with no unit, the needle-to-arm space is not listed, and no extension table is mentioned. The page lists 13 items in the carton and 17 presser feet in its specifications.
Pros: dual feed, a large stitch list, laser guide and knee lifter.
Cons: inconsistent foot counts and no table mentioned.
Buy if you want a feature-rich machine for both tasks. Skip if you want a simple machine.
Janome Continental M7
The Janome Continental M7 is a computerized machine with a very wide listed throat. It suits a sewist who makes large quilts and wants dual feed and a large included table without stepping up to a longarm, and who has room on the sewing table for a big machine.
Why it fits both: a quilting machine database lists a 13.5 inch by 5.5 inch throat, AcuFeed Flex dual feed, 400 built-in stitches, 1,300 stitches per minute, an included extension table of 26.77 inches by 15.75 inches, and 23 presser feet and accessories.
Limits: the figures come from a database citing the Janome page and a review, not from a Janome page we could open. The database says it is not frame compatible.
Pros: wide throat, dual feed, a large table and a generous accessory kit.
Cons: large size and secondhand data.
Buy if you want a wide throat and dual feed. Skip if space is tight.
Janome MC6700P
The Janome MC6700P is a computerized flatbed machine marketed for quilting. It suits a sewist who wants a 10 inch throat and a metal flatbed with a long stitch list, and who is willing to confirm the feet and table with a dealer before ordering the package.
Why it fits both: a database citing the Janome page lists a throat of 10 inches by 4.7 inches, 1,200 stitches per minute, 200 built-in stitches, and an all-metal flatbed.
Limits: the database says retail listings disagree on whether an even-feed system ships standard, and that the extension table is bundle dependent, so confirm the foot kit with a dealer. It does not state a buttonhole count.
Pros: a 10 inch throat and a metal flatbed.
Cons: unclear feet and table, and a database source.
Buy if you want a mid-size quilting throat with solid construction. Skip if you need confirmed dual feed.
Baby Lock Jazz II
The Baby Lock Jazz II is a computerized domestic machine with a wide listed workspace. It suits a sewist who wants a simple, uncluttered machine with a 12 inch workspace to the right of the needle, and who does not need a long list of decorative stitches.
Why it fits both: a database citing Baby Lock lists a 12 inch workspace, a maximum of 1,000 stitches per minute, 28 built-in stitches and drop feed for free-motion work.
Limits: the database says to check the kit for dual feed or a walking foot, and that the extension table depends on the bundle. It does not list buttonhole styles.
Pros: a wide workspace and a simple stitch list.
Cons: few stitches and unclear accessories.
Buy if you want a straightforward machine with lots of space. Skip if you want many stitch choices.
Buying guide: sewing machine for making clothes and quilts
A machine for both clothes and quilts must handle thin garment fabrics and thick quilt sandwiches. These sections explain which features matter for each task, where the pages in this guide differ, and what to ask a dealer before you make your choice.
Stitch range and buttonholes
Clothing needs reliable buttonholes, a good zigzag and a few stretch or utility stitches. One-step auto-size buttonholes measure the button for you, and the pages here list from seven to 16 styles. Quilting needs a straight stitch, a quarter inch guide and a free-motion option, so a huge stitch list is helpful but not required.
Look at which stitches you will really use, and do not pay for hundreds you will never sew. A sewist who makes mostly shirts and bags may rarely touch decorative stitches, while a quilter may only use a few. The CS7000X lists 70 stitches, the HC1850 lists 185, the HZL-F600 lists 225 and the BQ3100 lists 729, so the range is wide.
Throat space and tables
Throat space is the area to the right of the needle. Large quilts need a wide throat and a table to support the weight, while garments are sewn in sections and rarely need much space. Pages here list from 8 inches to 13.5 inches of throat, and several do not list throat space at all.
A wide table is often more useful day to day than a few extra inches of throat. Ask which table comes in the box, because some pages say it depends on the bundle. Also measure your sewing table, since a long extension table can overhang a small desk.
Feed systems and feet
A walking foot or dual feed helps layers move together, which matters for quilts and also for slippery or stretchy garment fabric. Some machines here list dual feed, such as the M7 and BQ3100, and the CS7000X lists a walking foot in its accessory feet.
A quarter inch foot, a free-motion foot and a buttonhole foot are the most common extras. Check which feet are in the box and which are sold separately, because the Juki page says feet are sold in packages. Some pages here list inconsistent foot counts, so confirm with a dealer.
Speed, motor and control
A maximum speed in stitches per minute matters less than control. A speed slider, a start-stop button and a needle-up or needle-down setting all make careful sewing easier. Quilts often benefit from a steady, moderate speed, and garments often benefit from slower speed around curves and corners.
Look for a speed control that suits both. Some pages here list speed with no unit, so ask the dealer to explain the figure. The Juki page lists 900 stitches per minute, the Janome MC6700P database listing says 1,200, and the Janome M7 listing says 1,300.
Needles, threads and fabrics
Garment fabrics and quilt layers need different needles and threads. Use the type and size your manual recommends, change needles often, and test on scraps before you cut into your good fabric. The machine does not know what fabric you have loaded, so settings matter.
Thread weight and fiber also change the look of a seam. Switch thread as the project requires, and keep the machine clean and oiled as the manual says. Lint from cotton batting and from garment fabric builds up quickly in the bobbin area.
Warranty, support and dealers
A local dealer can help with setup, feet and service, which is useful for a machine you will use for both clothes and quilts. Some pages here list a warranty, and the Brother CS7000X page lists a 25-year limited warranty, so read the terms yourself. Always read the terms.
Ask what the warranty covers and for how long, and keep your receipt. Online listings do not always match store packages, so confirm what is included in the box. If a page is a database listing, treat the figures as claims and verify them with the maker.
Matching a machine to your projects
Start with a short list of what you plan to sew in the next year. A person who makes shirts, pajamas and a few lap quilts needs a different machine from someone who makes bed quilts and the occasional jacket, and the pages here show that no machine leads on every feature.
Write down the largest quilt you expect to make, the heaviest fabric you expect to sew, and the garment details you care about, such as buttonholes and lettering. Then compare those needs with the stated throat, table, feet and stitch list on each page.
If your sewing leans toward garments, put buttonholes, stitch variety and a free arm first. If it leans toward quilts, put throat space, a table and feeding first. A machine that is merely good at both can be a smart choice for a mixed household.
Care, cleaning and setup
Both clothing and quilting shed lint, and the bobbin area collects it quickly. Clean the machine as the manual directs, oil only where the manual says to, and replace needles regularly so that stitches stay even on both light and heavy fabrics. Small habits help.
Set the machine on a stable table at a comfortable height, with the extension table level with the bed so fabric does not hang and pull. A good light and a chair that supports your back make long quilting sessions easier, and a cover keeps dust off between projects.
Keep the manual, the warranty details and a list of the feet that came in the box in one folder. When a machine ships with many accessories, a simple list of what each one does saves time on later projects.
Frequently asked questions
These answers stay general and point you back to the maker pages and manuals. None of them is a promise about how a machine will sew your own fabrics, so treat them as useful questions to take to a dealer before you buy any machine from this list. Ask a dealer too.
Can one machine really sew both clothes and quilts?
Yes, many machines do both, but each task has different needs. Clothing wants buttonholes, a stitch range and a free arm for cuffs and sleeves, while quilts want space, feeding and a table. Pick the side that matters most to you and check the other side carefully.
Test the machine with your own fabrics, including a thin garment cloth and a thick quilt sandwich.
Do I need a wide throat for clothes?
Not usually. Garments are sewn in sections and rarely need much space to the right of the needle, so a wide throat mainly helps with large quilts. If you make mostly clothing and the occasional small quilt, a modest throat can be enough for most of your sewing.
Is dual feed worth it?
It can help layers move together, which matters for quilts, slippery fabrics and matching patterns. Some pages here list dual feed and others list a walking foot instead, so compare what each machine actually includes. Dual feed adds complexity, so decide if you need it.
How many stitches do I need?
Most sewists use a small set of stitches. Buttonholes, straight, zigzag and a few utility stitches cover most clothing, and a quarter inch seam covers piecing. Extra stitches are a bonus, but they should not drive the decision when other features matter more.
Do computerized machines last?
Maker pages list warranties but do not promise a lifespan. Care, cleaning and service matter, so keep the manual, clean the bobbin area, and use a dealer for repairs. A simple mechanical machine has fewer parts, while a computerized one gives more stitches and controls.
What should I check before buying?
Check throat space, the table, the feet in the box, buttonhole style and the warranty. Ask a dealer to confirm what comes with the package, and try the machine with your own fabrics. Compare the pages in this guide to a current listing, since packages can change.
Conclusion
For clothes and quilts together, the Brother HC1850 and CS7000X offer wide tables and stitch variety, the Juki HZL-F600 adds 16 buttonholes, and the Janome M7 and Brother BQ3100 favor large quilts. The Janome MC6700P and Baby Lock Jazz II are simpler options. Try your own fabrics first, before buying.
Write Your Review
No reviews yet. Be the first to share your experience!