Key takeaways
- Undermount kitchen sinks with apron fronts in cast iron, steel and fireclay, compared on cabinet size, apron height, bowl depth and box contents for each model.
An apron front changes the whole cabinet job, so the five undermount kitchen sinks with apron fronts gathered here were each verified on a maker page that states both halves of the brief: an apron or farmhouse front, and undermount installation in the maker’s own words. The set runs from cast iron to fireclay to 16 gauge steel.
Quick verdict
Every model in this set needs a 36 inch cabinet except one, and that exception is the smallest sink here by a wide margin. The Kohler Whitehaven K-6488 is the retrofit story: a shortened, self-trimming apron in enameled cast iron that Kohler states can be fitted to existing standard cabinetry.
The Kraus Standart PRO KHF203-36 is the only double bowl, a 60/40 split in 16 gauge steel with two grids and two strainers in the box. The VIGO Oxford VGS3620FA is the single bowl steel kit, with a cutting board and roll-up rack included and undermount listed as the recommended install among three options.
The two fireclay models split by size. The Sinkology Grace 34 is the full-size fireclay apron sink, 33.85 inches wide with a rear offset drain and a stated recommended cabinet of 36 inches. The Franke Manor House MHK110-20WH is the compact outlier: 19-1/2 inches wide, a cabinet figure of just 21 inches, and a shallow 5-7/8 inch bowl, an apron front for a prep corner or a small kitchen rather than a main wash-up sink. Materials, not features, are the real dividing line in this set, because cast iron, fireclay and steel each bring a different weight, support and care story.
Included parts split the set as clearly as materials do. The two steel kits from Kraus and VIGO list grids, strainers and templates or boards in the box. The Kohler sheet lists its strainer as a recommended accessory to buy, the Franke sheet lists its strainer basket and cutting board as optional accessories, and the Sinkology page lists no included drain parts at all. An apron sink order is rarely the whole order, and the sections below count the extras model by model.
How we selected
Each model had to pass a two-part wording test on a page we opened: the page states an apron front or farmhouse design, and the page states undermount or dual mount installation for that model. Apron sinks whose sheets never name a mount type were left out, even from major makers, because this keyword turns on the mount as much as the apron.
Spec sheets, a maker product page and one maker instruction manual were the sources; every figure below is printed on one of those pages.
Several near misses are worth naming. A current Kraus fireclay apron sheet and a Kraus steel farmhouse sheet both state the apron clearly but never print a mount type, so both were excluded under the rule above. A Ruvati apron workstation listing showed no current offers, and an Elkay fireclay apron sheet dates from 2016, so neither was used. What remains is five models whose pages carry the full wording, across three materials and a wide size range.
Warranty lines are reported as the makers print them: limited lifetime on the Kohler, Kraus, VIGO and Franke pages, and a lifetime warranty under its own program name on the Sinkology page. Cabinet figures are quoted exactly as stated, whether the page calls them a minimum or a recommendation, and where a page disagrees with itself, the product section says so rather than picking the convenient number.
Undermount kitchen sinks with apron fronts, model by model
The five models are ordered by material and then size: cast iron first, then the two steel kits, then the two fireclay sinks from full size down to compact. Every model states a 36 inch cabinet except the Franke, and every model is a single bowl except the Kraus.
Apron height is only printed on the Kohler sheet, so apron comparisons lean on the stated front-to-back dimensions and each maker’s description of the front.
| Model | Material | Overall size | Bowl | Min cabinet | Included parts |
|---|---|---|---|---|---|
| KOHLER Whitehaven K-6488 | Enameled cast iron | 35-1/2 x 21-9/16 in | 30-3/4 x 18-1/16 x 9 in | 36 in | Template; strainer sold separately |
| Kraus Standart PRO KHF203-36 | 16 ga stainless steel | 35-7/8 x 20-3/4 x 10 in | 19 x 16 in and 13 x 16 in | 36 in | Two grids, two strainers, template, towel |
| VIGO Oxford VGS3620FA | 16 ga stainless steel | 36 x 20-1/2 in | 34 x 16-1/8 x 10 in | 36 in | Grid, strainer, drain cover, cutting board, roll-up rack |
| Sinkology Grace 34 SK451-34FC | Fireclay | 33.85 x 21.84 x 9 in | 29.9 x 18.17 x 8 in | 36 in recommended | None stated |
| Franke Manor House MHK110-20WH | Fireclay | 19-1/2 x 16 in | 18-1/8 x 13-1/4 x 5-7/8 in | 21 in | None; strainer and board optional |
KOHLER Whitehaven K-6488 undermount apron sink in cast iron
The Whitehaven K-6488 is Kohler’s short-apron answer to the apron sink problem: the sheet names it an undermount single bowl sink with a short apron, in enameled cast iron, and states that the shortened apron, at 6-3/4 inches, allows it to be retrofitted to existing standard cabinetry.
The stated minimum cabinet size is 36 inches, the bowl measures 30-3/4 by 18-1/16 inches at 9 inches deep, and the drain is offset.
The sheet adds the fitting details that decide a retrofit: a template is included, the drain hole is 3-5/8 inches, and a note states the bowl requires at least 6-7/8 inches from the top of the cabinet door. Cast iron brings the material’s usual trade: a hard enamel surface and real weight in the cabinet, with the support plan left to the installer since the sheet prints no weight. The sink carries the ASME A112.19.1 and CSA B45.2 listings on the sheet.
The limits are the extras and the apron itself. The K-5826 strainer is a recommended accessory, not an included part, so the drain fitting is a second purchase. A 6-3/4 inch apron shows less of the material than a tall farmhouse front, which is the price of the retrofit fit. Buy it if you want an apron front without replacing the cabinet run. Skip it if you want the tall apron look or a sink that arrives with its strainer in the box.
Kraus Standart PRO KHF203-36 farmhouse double bowl
The KHF203-36 is the double bowl of the set: a 60/40 split farmhouse sink in 16 gauge stainless steel, with an installation type the sheet states plainly as undermount and an apron front among its features. Overall dimensions are 35-7/8 by 20-3/4 by 10 inches, and the stated minimum cabinet size for undermount fitting is 36 inches.
The two bowls measure 19 by 16 inches and 13 by 16 inches, and the box is the fullest in this set alongside the VIGO: two bottom grids sized to the two bowls, two strainers (a BST-1 and an ST-1), a cut-out template and a towel are all listed as included accessories. The sheet also lists the maker’s Noise Defend sound treatment, a satin finish, a limited lifetime warranty, and the ASME A112.19.3 and CSA B45.4 codes. For a household that washes in one bowl and rinses in the other, this is the only layout here that keeps the two jobs apart.
The limits are size and sourcing. At nearly 36 inches wide with a 36 inch cabinet minimum, it is a full-size commitment, and the smaller 13 inch bowl will not take wide pans flat. The specs here come from the maker’s specification sheet, so current sale status is worth a fresh check at order time. Buy it if you want a double bowl apron sink with its grids and strainers included. Skip it if your cabinet is under 36 inches or you prefer one large single bowl.
VIGO Oxford VGS3620FA apron front kit with three mount options
The Oxford VGS3620FA is a 36 inch single bowl apron front sink in 16 gauge 304 stainless steel, and its manual is unusually open about installation: undermount fitting with a 1/4 inch reveal is the recommended option, with flush mount and above counter installations also described.
The bowl measures 34 by 16-1/8 inches at 10 inches deep, the required cabinet space is stated as 36 inches, and the drain sits at the rear with a standard 3-1/2 inch center opening.
The kit is the other full box in this set: the packing list runs to the sink, a drain cover, a grid, a strainer, a cutting board and a roll-up drying rack. The manual also lists zero radius corners, drain grooves in the bowl floor, a satin finish, sound-muting insulation, cUPC certification by IAPMO, and a limited lifetime warranty that the maker says is activated by registering the product. Few apron sinks at this size arrive with the board and rack already chosen.
The limits are the cabinet and the paperwork. VIGO states its farmhouse sinks require custom-ordered cabinets with a front cutout, no template is provided because the actual sink is used as the guide, and the manual allows roughly 1/2 inch of variance in the handmade body. Its own measurement list also prints an exterior depth of 9 inches against a 10 inch bowl depth, so measure the delivered sink before cutting. Buy it if you want the accessory kit and a choice of mounts. Skip it if your cabinets are stock units you cannot modify.
Sinkology Grace 34 SK451-34FC fireclay apron sink
The Grace 34 is Sinkology’s full-size fireclay entry: the product page heads it a fireclay undermount kitchen sink with a striking farmhouse apron, in Crisp White. Product dimensions are 33.85 by 21.84 by 9 inches, and the recommended cabinet size is 36 inches.
The bowl measures 29.9 by 18.17 by 8 inches, and the drain is a rear offset design with a 3.5 inch opening, which the maker notes leaves more cabinet space beneath.
The page states the fireclay is the maker’s SureFire material and covers the sink with its Everyday Promise lifetime warranty. Sinkology’s own guidance on the page is worth reading before ordering: fireclay farmhouse sinks typically weigh 70 to 110 pounds, need dedicated support rather than brackets alone, and are best positioned before the countertop is templated, because the handmade body varies slightly from piece to piece. That advice is printed for the range, and it applies to this model.
The limits are the extras and the bowl depth. The page lists no included grid, strainer or drain parts, so those are separate purchases, and at 8 inches the bowl is the least deep of the full-size models here. The 36 inch cabinet figure is stated as a recommendation rather than a minimum, which still leaves the measuring to you. Buy it if you want the classic white fireclay apron look at full size. Skip it if you want a deeper bowl or a complete kit in one box.
Franke Manor House MHK110-20WH compact fireclay apron sink
The Manor House MHK110-20WH is the compact proof that an apron front does not require a 36 inch cabinet: Franke’s sheet states the installation type as undermount apron front, the overall size as 19-1/2 by 16 inches, and the minimum cabinet size as just 21 inches.
The fireclay bowl measures 18-1/8 by 13-1/4 inches at 5-7/8 inches deep, the sink weighs 40 pounds, and the sheet notes dimensions may vary by 2 percent through the firing process.
Franke describes the apron front design as letting the user stand directly in front of the basin, and finishes the fireclay with its CeramicPlus coating, which the maker says makes the surface easy to clean. The design comes from the Manor House collection Franke created with Villeroy & Boch, the warranty is limited lifetime, and the corner radius is a stated 12mm. For a small kitchen, a prep zone or a second sink run, it is the only model in this set that fits the cabinetry those spaces usually have.
The limits are capacity and extras. A 5-7/8 inch bowl depth will not soak a roasting pan, and the 18 inch bowl width rules out wide trays. The cutting board and strainer basket are listed as optional accessories, not included parts. Buy it if you want an apron front in a 21 inch cabinet or a fireclay prep sink. Skip it as a main family sink, where the Whitehaven or the Grace gives you the bowl volume this one gives up.
Buying guide
Apron sink buying is cabinet buying first and sink buying second. The five models here state cabinet figures of 36 inches four times and 21 inches once, but the number is only the start: the cabinet front has to be cut or built for the apron, the sink needs support under its full weight, and the counter is templated after the sink is on site.
The headings below work through the checks in the order an installer would make them.
Start with the cabinet front and the apron height
An apron front replaces the cabinet’s false front with the sink’s own face, so the cabinet work is structural, not cosmetic. Kohler’s short 6-3/4 inch apron is the one design made to retrofit standard cabinetry. VIGO requires custom-ordered cabinets with a front cutout, and the fireclay makers advise cutting the cabinet to fit the sink.
Measure the door clearance below the apron as well: the Kohler sheet’s note about clearance from the top of the cabinet door is the kind of figure that decides whether the doors still open.
Support and templating for undermount kitchen sinks with apron fronts
Apron sinks carry their weight on the cabinet, not on the counter, and the makers say so in different ways. Sinkology advises dedicated support under its fireclay sinks and positioning the sink before the countertop is templated. VIGO builds structural supports inside the cabinet frame in its instructions and uses the actual sink as the template.
Franke prints a 40 pound weight for the small Manor House, and fireclay at full size runs far heavier. The pattern is consistent: support first, sink in place, counter measured last.
Pick the material for the work, not the photograph
The three materials here behave differently every day. Enameled cast iron gives a hard, glossy surface in a heavy body, and it is the only painted-metal option in the set. Fireclay gives the classic farmhouse look in white, with handmade size variance the sheets put at up to 2 percent and real weight to support.
Sixteen gauge steel is the lightest route to a big bowl, takes grids and accessories sized by the maker, and shows water spots more readily than either ceramic. None of the three is best in general; each is best for a different tolerance of weight, variance and upkeep.
Count the box before comparing totals
The included parts in this set range from two full accessory kits to nothing stated at all. Kraus includes two grids, two strainers and a template; VIGO includes a grid, strainer, drain cover, cutting board and roll-up rack. The gap matters, because the missing parts are rarely optional in a finished install.
Kohler includes the template but lists the strainer as a recommended accessory; Franke lists its board and strainer basket as optional; Sinkology lists no included parts. A grid also protects a fireclay or enamel floor from pan marks, so for the models without one, price the matching grid into the order rather than after the first chip.
Check the drain position against your plumbing
Drain placement varies more than buyers expect. The Whitehaven and the Grace use offset drains, the VIGO uses a rear placement, and the Kraus sheet does not highlight position, while drain openings run 3-1/2 inches on the steel and Sinkology models and 3-5/8 inches on the Kohler.
An offset or rear drain frees cabinet floor space for bins and plumbing, but it also moves the disposal and trap relative to the existing wall outlet. Compare the stated position with your current plumbing before the cabinet is cut, not after.
FAQ
Apron sink questions are mostly about cabinets and weight rather than bowls. The answers below stick to what the five makers state on the pages behind this guide, and flag the points where the pages leave the decision to the installer. Most have short answers once the cabinet question is settled.
Can an apron sink go into existing cabinets?
One model here is built for exactly that. Kohler states the Whitehaven’s shortened apron allows it to be retrofitted to existing standard cabinetry, within its stated door clearance. The other makers are more demanding: VIGO requires custom-ordered cabinets with a front cutout, and the fireclay makers advise cutting the cabinet to fit the sink.
An existing 36 inch sink base is a starting point for any of them, but only the Whitehaven promises the fit in writing.
Are undermount kitchen sinks with apron fronts hard to support?
They need more support than a standard undermount, and the makers do not hide it. Fireclay models are the heavy end: Sinkology puts the category at 70 to 110 pounds and advises dedicated support, while even Franke’s small fireclay sink weighs 40 pounds.
VIGO’s instructions build structural supports inside the cabinet frame, and cast iron adds its own weight. None of this is a reason to avoid the style, but the support structure belongs in the plan and the budget from the start.
Does the apron front change how the sink is used?
Yes, in one stated way: the apron removes the strip of counter and cabinet front between the user and the bowl. Franke describes its apron design as letting the user stand directly in front of the basin for prep and cleaning, and VIGO designs the front of its farmhouse sinks to extend 3/4 inch beyond the countertop front.
In practice that means less leaning over a counter edge to reach the bowl, which matters most at deep bowls like the 10 inch Kraus and VIGO models.
Single bowl or double bowl for an apron sink?
This set offers one double bowl, the Kraus 60/40, against four single bowls. The double bowl suits households that soak and rinse at the same time and comes with both grids and both strainers included. The widths in this section make the trade concrete.
The single bowls give one uninterrupted width: 34 inches of bowl in the VIGO, 30-3/4 in the Whitehaven and 29.9 in the Grace, which takes wide pans and trays the split bowl cannot. Choose by your widest regular pan first and your washing habits second.
What else do I need to buy with an apron sink?
It depends on the model, which is why the box contents are listed for each one above. Possible extras across this set include a strainer (Kohler, Franke), a bottom grid (Sinkology, Franke, Kohler), a cutting board (Franke), and the support structure every maker expects the installer to provide.
The Kraus and VIGO kits are the closest to complete. Add the faucet separately in all five cases, since none of these pages includes one.
Conclusion
For most kitchens the Whitehaven is the apron sink that asks the least cabinet work, the Kraus and VIGO kits are the steel routes with parts included, and the Grace is the full-size fireclay classic. The Franke proves the style scales down to a 21 inch cabinet. Measure the cabinet first, plan the support second, and the apron picks itself.