Updated Nov 15, 2026· 16 min read

Key takeaways

  • Quartz counters need a sink that fits the cutout and cabinet. Compare six undermount sinks on size, material, bowl layout, and included parts in this guide.

Quartz counters pair well with undermount bowls, but a poor fit can leave gaps at the rim and strain the cabinet below. This guide compares undermount kitchen sinks for quartz countertops on bowl size, cabinet fit, material, and included parts, so you can match a sink to your slab and daily washing load.

Quick verdict

For most quartz counters, start with bowl size and minimum cabinet size, then pick a material. The Kraus Forteza KGU-55 gives a single quartz composite bowl, the Kraus KHU100-30 gives a 16 gauge steel bowl, and the Kohler Cairn K-8206 gives the deepest composite option in this group.

All six sinks below mount under the counter, so the quartz edge stays exposed and wiping crumbs into the bowl stays simple. The group splits into three material families: quartz composite, granite composite, and stainless steel. Composite bowls bring color through the body and quieter contact with dishes. Steel bowls bring a thinner wall, a familiar look next to steel appliances, and grids in the box on the Kraus models listed here.

If your cabinet is smaller than the common sizes below, read the cabinet notes closely before you order a template cut. Two sinks here fit a 33 inch minimum cabinet, while the rest need a 36 inch minimum cabinet. Bowl depth also varies from 9-1/2 inches to 10 inches, which changes how tall pots sit under the faucet.

Product Type Best for Key spec Main limit
Kraus Forteza KGU-55 Quartz composite single basin One large bowl in black 31-3/4 x 19-1/8 inches, 36 inch cabinet No basin rack included
Kraus Forteza KGD-54 Quartz composite single basin, dual mount Larger counters with a faucet hole 33 x 22 inches, 1 faucet hole Needs a 36 inch cabinet
Kraus Standart PRO KHU100-30 Stainless steel single basin Smaller cabinets, grid included 30 x 18 inches, 33 inch cabinet Single bowl only
Kraus Standart PRO KHU102-33 Stainless steel double basin Split washing and rinsing 50/50 split, 32-3/4 x 19 inches Needs a 36 inch cabinet
Kohler Cairn K-8206-CM1 Neoroc granite composite single bowl Deep single bowl, matte black 33.5 inches long, 9.5 inch depth No faucet holes
Kohler Cairn K-8199-CM6 Neoroc granite composite double bowl Equal bowls with a slim divide 50/50 split, 33.5 inches long Needs a 36 inch cabinet

How we selected

Each sink below comes from a maker or listing page that states the mount type, the outside dimensions, the bowl dimensions, and the minimum cabinet size. Pages that left out cabinet size or bowl depth were set aside, and only sinks listed as undermount models with current stock notes stayed in the group.

The mix was built to cover the choices a quartz counter owner actually faces. Material comes first, because quartz composite, granite composite, and stainless steel age differently and sound different in daily use. Bowl layout comes next, with three single bowls and three double bowls across the set. Size coverage runs from a 30 inch sink for a 33 inch cabinet up to 33.5 inch sinks for a 36 inch cabinet, so both compact and wide counters have an option.

Included parts were read from each listing page rather than assumed. Some sinks ship with a bottom grid and a basket strainer, some ship with a basin rack only, and some list the strainer as included while the grid is sold apart. Those differences are stated in each product section, because a grid changes both the cost of the full setup and how the bowl surface wears.

Undermount kitchen sinks for quartz countertops compared

The six product sections below follow the same order: who the sink suits, why it fits a quartz counter, the specs stated on its page, and the limits to weigh before ordering. Dimensions are outside measurements unless a line says basin or bowl, and cabinet figures are the minimum sizes the maker or listing page states.

Kraus Forteza KGU-55 single basin quartz composite sink

This sink suits a cook who wants one wide bowl with no divider and a dark finish that echoes a quartz slab. The maker lists quartz composite construction with color through the body, an undermount fit, and a single basin layout. A basket strainer and mounting hardware come in the box, per the listing page.

The outside size is 31-3/4 inches long by 19-1/8 inches wide, with a height of 9-1/2 inches. The basin measures 29 inches by 16-3/8 inches by 9-1/2 inches deep, and the drain connection is 3-1/2 inches. The listing page states a minimum cabinet size of 36 inches and a product weight of 29.3 lbs. Drain placement is listed as center and right, and the sink has no faucet holes, so the faucet mounts on the counter or the wall.

The listing page describes a sloped bottom for draining and sound absorbent construction. Because the bowl is quartz composite, it pairs visually with quartz counters without a metal rim line. The single basin holds sheet pans and stock pots flat, which a divided bowl cannot do as easily.

  • Pros: quartz composite body with color through the material, per the maker
  • Pros: basket strainer and installation hardware included
  • Pros: single basin fits large pans without a divider
  • Cons: no basin rack included, per the listing page
  • Cons: 36 inch minimum cabinet rules out smaller base units

Buy if you want a single composite bowl that sits quietly under a quartz slab and your cabinet meets the stated 36 inch minimum. Skip if you need a double bowl for soaking on one side and rinsing on the other, or if you want a bottom grid included in the box.

Kraus Forteza KGD-54 dual mount quartz composite sink

This model suits a larger counter run where a 33 inch sink fits and a deck faucet hole is useful. The maker lists quartz composite construction and a dual installation, so the sink can mount under the counter or drop into a cutout. One faucet hole is pre-drilled, which sets it apart from the other composite sinks here.

The outside size is 33 inches long by 22 inches wide, with a height of 9-5/8 inches. The basin measures 29 inches by 16-3/8 inches by 9-5/8 inches deep. The listing page states a minimum cabinet size of 36 inches, a drain connection of 3-1/2 inches, a faucet hole size of 1-3/8 inches, and a product weight of 31.7 lbs. A basket strainer and mounting hardware are listed as included, and no basin rack is listed.

The wider 22 inch front to back measurement gives more room between the faucet line and the front edge than the KGU-55, which can help on deep counters. The listing page describes the same Forteza quartz composite body with rounded corners and a smooth surface. As an undermount on quartz, the pre-drilled hole is not used the same way as in a drop-in fit, so confirm the hole plan with your fabricator before the slab is cut.

  • Pros: dual mount design gives install flexibility, per the maker
  • Pros: widest counter footprint in this group at 33 x 22 inches
  • Pros: basket strainer and hardware included
  • Cons: no basin rack included, per the listing page
  • Cons: 36 inch minimum cabinet, and the size needs a long counter run

Buy if your quartz counter run is wide, your cabinet meets the 36 inch minimum, and you want the option of a drop-in fit later. Skip if your counter depth is tight, since the 22 inch width is the deepest footprint in this group.

Kraus Standart PRO KHU100-30 stainless steel sink

This sink suits a smaller kitchen where the base cabinet cannot take the wider models above. The maker lists 16 gauge stainless steel in grade 304, an undermount fit, and a single basin. It is the only sink in this group that fits a 33 inch minimum cabinet, and a bottom grid comes in the box.

The outside size is 30 inches long by 18 inches wide, with a height of 10 inches. The basin measures 28 inches by 16 inches by 10 inches deep. The listing page states a minimum cabinet size of 33 inches, a drain connection of 3-1/2 inches, and a product weight of 24.42 lbs. The kit lists a protective bottom grid, a drain assembly with basket strainer, a kitchen towel, mounting hardware, and a cutout template.

The maker describes NoiseDefend sound dampening pads that cover 80 percent of the sink base, a rear drain location, and channel grooves in the sloped bottom. Rounded corners are listed as a cleaning feature. On a quartz counter, the steel bowl gives a clear contrast line at the cutout and matches steel appliances without adding a second color to the room.

  • Pros: fits a 33 inch minimum cabinet, the smallest in this group
  • Pros: bottom grid and basket strainer included
  • Pros: 16 gauge grade 304 steel, per the maker
  • Cons: single basin only, with no divider option in this model
  • Cons: steel shows water spots more than matte composite finishes

Buy if your cabinet is 33 inches, you want a grid included, and a single deep bowl fits how you wash. Skip if you regularly soak and rinse at the same time and need two bowls working in parallel.

Kraus Standart PRO KHU102-33 double basin steel sink

This sink suits a household that washes by hand and wants two equal bowls under a quartz counter. The maker lists 16 gauge stainless steel in grade 304, an undermount fit, and a 50/50 basin split. Two bottom grids come in the kit, one for each bowl, along with drain assemblies and strainers.

The outside size is 32-3/4 inches long by 19 inches wide, with a height of 10 inches. Each basin measures 14-7/8 inches by 17 inches by 10 inches deep. The listing page states a minimum cabinet size of 36 inches, a drain connection of 3-1/2 inches, and a product weight of 33.09 lbs. The kit lists protective bottom grids, a drain assembly with a removable strainer, a drain assembly with a basket strainer, a kitchen towel, mounting hardware, and a cutout template.

Equal bowls make it simple to assign one side to washing and one side to rinsing, and the rear drain location is listed as a space gain under the sink. The maker describes NoiseDefend pads covering 80 percent of the sink base and a sloped bottom with channel grooves. The trade-off against the single bowl models is pan size: a wide sheet pan will rest across the divider rather than sit flat in one bowl.

  • Pros: two equal 10 inch deep bowls for parallel tasks
  • Pros: two bottom grids and strainers included
  • Pros: 16 gauge grade 304 steel, per the maker
  • Cons: needs a 36 inch minimum cabinet
  • Cons: divider limits flat space for oversized pans

Buy if you wash by hand often and want matched bowls with grids included. Skip if most of your washing is large roasting pans and sheet pans that need one open basin.

Kohler Cairn K-8206-CM1 Neoroc single bowl sink

This sink suits a cook who wants a deep matte composite bowl in black with a rack included. The maker lists Neoroc granite composite construction, an undermount fit, and a single bowl layout. The listing page states that a K-5196 bottom basin rack, cutout templates, and installation clips come with the sink.

The outside size is 33.5 inches long by 18.3125 inches wide, and the listed depth is 9.5 inches, with an overall height of 10-1/8 inches in the headline dimensions. The listing page states a minimum cabinet size of 36 inches and no faucet holes. It also lists an offset drain, which the maker describes as a way to gain workspace in the sink and storage space beneath it.

The maker lists Neoroc as resistant to scratches, stains, chips, and thermal shock, and lists heat resistance up to 750 degrees F. The matte finish carries color through the bowl, which pairs well with both light and dark quartz slabs. Against the Kraus composite models, this one includes the rack but not a strainer, per its listing page, so budget for the drain fitting your plumber specifies.

  • Pros: basin rack included, per the listing page
  • Pros: maker lists heat resistance up to 750 degrees F
  • Pros: offset drain frees storage room under the bowl
  • Cons: no faucet holes, so the faucet must mount on the counter
  • Cons: needs a 36 inch minimum cabinet

Buy if you want a deep single composite bowl with a rack in the box and a matte black finish. Skip if you want a strainer included or a smaller cabinet fit than 36 inches.

Kohler Cairn K-8199-CM6 Neoroc double bowl sink

This sink suits a household that wants two equal composite bowls and a low divider for long items. The maker lists Neoroc granite composite construction, an undermount fit, and a 50/50 bowl split in a matte white finish. The listing page states that a K-5656 bottom sink rack, cutout templates, and clips are included.

The outside size is 33.5 inches long by 18.3125 inches wide, with a listed depth of 9.5 inches and an overall height of 10-1/8 inches in the headline dimensions. The listing page states a minimum cabinet size of 36 inches, no faucet holes, and rear drains. It describes a slim divide that creates more space while still splitting the sink into two working bowls.

The maker lists Neoroc as resistant to scratches, stains, chips, and thermal shock, with a matte finish that carries rich color. Rear drains are listed as a workspace and storage gain, the same approach as the single bowl Cairn. In matte white, this bowl reads light against a dark quartz slab and shows a clear outline at the cutout, which some owners prefer for aiming the faucet stream.

  • Pros: equal double bowls with a slim divide for long pans
  • Pros: bottom sink rack included, per the listing page
  • Pros: rear drains free space in the cabinet below
  • Cons: needs a 36 inch minimum cabinet
  • Cons: no faucet holes, so plan a counter mounted faucet

Buy if you want composite double bowls with a rack included and a light matte finish. Skip if your washing centers on single oversized items that need one undivided basin.

Buying guide

A quartz counter is cut once, so the sink decision locks in the cutout, the cabinet load, and the faucet position. Work through cabinet size first, then bowl layout, then material, then the reveal at the cutout edge. Each step below uses the spec lines that the maker and listing pages in this guide actually state.

Sizing undermount kitchen sinks for quartz countertops by cabinet

Minimum cabinet size is the first filter, because an undermount bowl hangs inside the cabinet box. In this group the stated minimums are 33 inches for the Kraus KHU100-30 and 36 inches for the other five sinks. Measure the inside width of your base cabinet, not the door front, before any template work starts.

Outside length matters next. A 33.5 inch sink on a short counter run leaves little landing space on each side of the cutout. Keep room for a faucet behind the bowl and for hot pans beside it. If your run is short, the 30 inch Kraus KHU100-30 or the 31-3/4 inch Kraus KGU-55 will leave more counter on both sides than the 33 inch and 33.5 inch models.

Choosing a material that suits quartz

Quartz composite, granite composite, and stainless steel each behave differently under a quartz slab. The composite bowls here carry color through the body, so a small chip at the rim shows the same color rather than a bright metal line. The makers describe these surfaces as smooth and matte, which hides water marks well.

Steel bowls are thinner and lighter for the same footprint. The two Kraus steel sinks here list weights of 24.42 lbs and 33.09 lbs, while the composite sinks list 29.3 lbs and 31.7 lbs for similar sizes. Steel also gives a direct match with steel appliances and grids that sit in the bowl. Pick based on how you wash: composite for a quiet, color matched bowl, steel for a thin wall and a familiar metal finish.

Single bowl or double bowl

A single bowl takes sheet pans, stock pots, and roasting pans flat, and it gives one large area for washing produce. The cost is task separation: soaking and rinsing share the same water unless you use a basin inside the bowl. Three sinks in this guide are single bowls, ranging from 30 inches to 33.5 inches long.

A double bowl splits work into two zones. Equal 50/50 bowls suit matched washing and rinsing, while a low or slim divide lets long pans rest across both bowls. The Kohler Cairn K-8199-CM6 lists a slim divide, and the Kraus KHU102-33 lists two full depth bowls at 10 inches each. Match the split to your habits rather than to habit alone: hand washers gain more from two bowls than dishwasher households do.

Reading the reveal and the cutout

The reveal is the small band of sink rim or counter edge visible at the cutout. With undermount sinks on quartz, the fabricator cuts the slab to the template the maker supplies. Both Kohler Cairn models list templates and clips as included, and the Kraus steel models list a template in the kit. Confirm the version before cutting.

Ask the fabricator how the bowl weight will be supported. Undermount bowls hang from the slab and the cabinet, and heavy composite bowls plus a full load of water add real load. The listing pages state product weights, which your fabricator can use when planning clips, rails, or a support frame inside the cabinet.

Checking included parts before you order

Included parts change the true cost of the setup. In this group, the Kraus steel sinks include bottom grids and strainers, the Kraus composite sinks include a basket strainer but no grid, and the Kohler Cairn sinks include a basin rack but list no strainer. Read the included list for the exact model you order.

Drain position also deserves a look. Rear and offset drains, listed on the Kraus KHU100-30 and the Kohler Cairn models, move the drain assembly toward the back of the cabinet. That can free room for a bin or a water filter unit under the sink. Center drains keep the disposal centered, which some existing plumbing layouts need.

FAQ

Most questions about pairing a sink with quartz come down to fit, support, and daily care. The answers below stay with what the maker and listing pages state about these six sinks, plus general points about undermount installs that apply to any quartz counter project you plan with a fabricator.

Can any undermount sink go under a quartz countertop?

Most undermount sinks can mount under quartz if the cabinet meets the stated minimum size and the slab is cut to the maker template. Quartz is a hard, consistent material that supports an undermount rim well. The limits here are practical: cabinet width, counter depth, and bowl weight, all stated on the listing pages.

Check the front to back width as well. The Kraus KGD-54 measures 22 inches wide, which needs a deep counter. Standard counters fit the 18 inch to 19-1/8 inch widths of the other models more easily.

How do undermount kitchen sinks for quartz countertops handle heat?

Heat handling depends on the bowl material. The Kohler Cairn listing pages list heat resistance up to 750 degrees F for the Neoroc composite. The Kraus Forteza pages describe quartz composite bowls built to stand up to impact, scratches, and shock, without a stated degree figure on the pages read for this guide.

For the counter itself, use trivets under hot pans as a habit. That protects the quartz surface around the cutout, which is the area under the most stress in daily cooking.

Does a composite sink stain on a light quartz counter?

The composite bowls here carry color through the body, per the maker pages, so the bowl color does not sit as a thin surface layer. The Kohler pages list Neoroc as resistant to stains and fading, and the Kraus Forteza pages describe color that resists fading. Rinse dark liquids such as coffee and wine after use.

The counter junction is a silicone line. Ask your installer which silicone they use and how to renew it, since that line, not the bowl, is the part that can pick up color over time.

What cabinet size do most of these sinks need?

Five of the six sinks in this guide state a 36 inch minimum cabinet size on their listing pages. The exception is the Kraus KHU100-30, which states a 33 inch minimum cabinet size. If your base cabinet is smaller than 33 inches inside, none of the six fits as listed, and a smaller sink family is the right place to look.

Measure inside the cabinet box at its narrowest point, including any drawer hardware or plumbing that intrudes. The stated minimum assumes a clear box.

Should the faucet mount on the sink or the counter?

Five sinks here have no faucet holes, so the faucet mounts through the quartz counter behind the bowl or on the wall. The Kraus KGD-54 is the exception, with one pre-drilled faucet hole listed for its dual mount design. With a counter mounted faucet, confirm the counter depth behind the cutout leaves room for the faucet body and handle swing.

Plan the faucet reach against the bowl. A faucet that lands its stream near the drain is easier to use for rinsing, and rear drain bowls pair well with a slightly longer reach.

Conclusion

For quartz counters, match the cabinet first and the material second. The Kraus KHU100-30 fits smaller cabinets with a grid included, the Kraus Forteza KGU-55 gives a single composite bowl, and the Kohler Cairn K-8206 adds a rack and the deepest composite profile in this group of six sinks for daily use.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.